**** BEGIN LOGGING AT Fri Dec 30 03:00:01 2005 Dec 30 07:03:19 I just got my NSLU2 and unslung it according to http://download.berlios.de/unslung/Unslung-5.5-beta-README.txt. Dec 30 07:03:37 If mount says /dev/sda1 on / type ext3 (rw) everything went well? Dec 30 08:04:08 hi boomcar Dec 30 08:07:47 hwy Driffy Dec 30 08:07:54 hey* Dec 30 08:08:48 enjoying the slug ;) Dec 30 08:21:04 boomcar :P glad to hear that Dec 30 08:21:44 me too :P actually ordered a second unit yesterday Dec 30 08:24:27 mmm Dec 30 08:24:38 I am having probloems unslinging Dec 30 08:25:25 when I boot without hd and reattach it later it all works fine (except for the purpose of unslinging) Dec 30 08:25:42 when I boot with hd attached the slug doesn't boot Dec 30 08:26:13 ? Dec 30 08:39:53 Boomcar, http://groups.yahoo.com/group/nslu2-linux/message/7489 Dec 30 08:40:07 that should be the solution Dec 30 08:41:10 I am looking into it.. Dec 30 08:41:23 caplink Dec 30 08:41:28 I reflashed! Dec 30 08:41:34 I reunslung Dec 30 08:41:42 And still this probs Dec 30 08:41:50 And it worked fine b4! Dec 30 08:41:59 ps Morning! Dec 30 08:42:38 yep, morning, btw Dec 30 08:42:48 and the funny thing is: Dec 30 08:42:57 when I reflashed and did df Dec 30 08:43:03 fschmitt, yes, then everything is fine Dec 30 08:43:15 I saw 3 mountpoints Dec 30 08:43:30 when I rebooted there was only one left Dec 30 08:43:37 like yesterday evening Dec 30 08:48:11 caplink811_log: Yepp, already installing three of the fantastic four: emacs, screen, python (zsh missing). Dec 30 08:51:07 Is there a newsclient which can download binaries form the newsgroups? Dec 30 08:52:14 from the slug? Dec 30 08:53:37 You mean for the slug? Dec 30 08:53:54 yes Dec 30 08:54:20 Caplink: I followed the steps and it went fine till now Dec 30 08:54:29 fine :) Dec 30 08:54:33 I now have to change the password Dec 30 08:54:49 on the disk what file do I hav eto vi Dec 30 08:54:50 ? Dec 30 08:55:48 Boomcar: Well, there's xemacs, so you could use Gnus but it is quite hard to configure and use. Dec 30 08:56:00 mmm Dec 30 08:56:05 too bad... Dec 30 08:57:34 boot without disk, log in, reattached the hd, wait (2 mins), run passwd command to change the password, and at last copy /etc/passwd to /share/hdd/conf/passwd. Verify, that everything is fine, by telnet in (in a second session) using the new password Dec 30 09:00:09 and copy is cp or copy? Dec 30 09:00:49 copy /etc/passwd /share/hdd/conf/passwd Dec 30 09:00:53 is this right? Dec 30 09:02:34 or: copy /etc/passwd /share/hdd/conf/ Dec 30 09:09:53 anyone? Dec 30 09:11:04 hi, is there anyone around who has some knowledge on how loggign works (syslogd/klogd) Dec 30 09:11:21 my /var/log/messages always is emtpy whereas dmesg shows stuff Dec 30 09:11:39 this is on the openslug (2.6.15rc5) Dec 30 09:15:32 Boomcar, cp /etc/passwd /share/hdd/conf/passwd Dec 30 09:15:49 Filesystem 1k-blocks Used Available Use% Mounted on Dec 30 09:15:49 rootfs 195843204 44720 193808836 0% / Dec 30 09:15:49 dev/sda1 6528 5324 1204 82% /initrd Dec 30 09:15:49 dev/sda1 195843204 44720 193808836 0% / Dec 30 09:15:49 dev/sda1 195843204 44720 193808836 0% /share/hdd/data Dec 30 09:15:50 dev/sda2 116661 4148 111309 4% /share/hdd/conf Dec 30 09:16:10 there are 2 interesting resources in the wiki, Dec 30 09:16:12 1st http://www.nslu2-linux.org/wiki/HowTo/HomePage Dec 30 09:16:24 Filesystem 1k-blocks Used Available Use% Mounted on Dec 30 09:16:24 rootfs 195843204 44720 193808836 0% / Dec 30 09:16:30 and 2nd http://www.nslu2-linux.org/wiki/FAQ/HomePage Dec 30 09:16:35 looks good? Dec 30 09:16:43 doesn't it Caplink? Dec 30 09:16:52 yes, that is fine Dec 30 09:17:11 An ipkg update is possible no? Dec 30 09:17:17 now*? Dec 30 09:17:21 yes Dec 30 09:17:50 ipkg update and??? there was a second update line? Dec 30 09:18:08 I thought Dec 30 09:18:23 ipkg update, to get the latest packagelist Dec 30 09:18:33 and then ipkg install what_ever_you_want Dec 30 09:18:33 yes I did Dec 30 09:18:37 k Dec 30 09:18:52 we did something to get more or less working Dec 30 09:18:57 was that dropbear? Dec 30 09:19:36 no., dropbear is for secure login via ssh Dec 30 09:20:18 Man am I happy! Dec 30 09:20:23 less as pager is in a package, use http://ipkgfind.nslu2-linux.org/ to resolv in which Dec 30 09:21:00 what I need is: get a short list or a total list which I can scroll through Dec 30 09:21:09 to whatch the packages Dec 30 09:21:24 then you need a pager (aka less or more) Dec 30 09:21:51 or set the scrollback buffer in your telnet client high enough Dec 30 09:23:42 ~seen marceln Dec 30 09:23:43 marceln was last seen on IRC in channel #nslu2-general, 1d 17h 46m 17s ago, saying: 'ByronT: Ofcourse i will accept your excuses. I probably wouldn't have reacted in an other way'. Dec 30 09:25:31 going to grab a Bite... Dec 30 09:25:37 cheers Dec 30 09:48:56 hi Dec 30 09:49:34 hi FB[i] Dec 30 09:50:29 I just got a new USB disk !! (250G) but now I want to use it on my nslu2 but I allready have 2 disk connected ...my question is ... how do I know what disk I use (for the unsling) I dont remember witch one I use ... can I see that some where ? Dec 30 09:50:54 or dosent it matter Dec 30 09:51:15 can I just unplug one and plugg in the new one and it will run as before Dec 30 09:51:17 FB[i], if you want to replace a disk use the one that you are not unslung to Dec 30 09:51:30 ye Dec 30 09:51:39 well if you use the wrong one you'll have to unsling again Dec 30 09:51:42 but how do I know witch disk that is Dec 30 09:51:46 df Dec 30 09:51:49 oki Dec 30 09:51:52 tnx Dec 30 09:52:08 yw Dec 30 09:52:11 :) Dec 30 09:52:51 in the root of the unslinged disk there is a hidden file .unslung and another .sd[a|b]1root Dec 30 09:53:19 ok Dec 30 09:53:22 I´l check Dec 30 09:54:02 actually if you want to I think with the latest unslung sw you can even connect a 3rd disk (using a hub) Dec 30 09:54:18 a USB hub that is, not an ethernet hub :-) Dec 30 09:54:34 damn ! Dec 30 09:54:40 that works now? Dec 30 09:54:41 ? Dec 30 09:54:44 http://www.rafb.net/paste/results/GZc1Oe37.html Dec 30 09:54:53 to have 3 disk I mean Dec 30 09:54:57 i think in the latest unslung yes, in openslug definitely Dec 30 09:54:57 check my paste Dec 30 09:55:05 ok kool Dec 30 09:55:13 have to try that :) Dec 30 09:55:37 ../dev/sda1 Dec 30 09:55:38 not with unslung-5.5, that is a unslung-6.x feature Dec 30 09:55:56 yup Dec 30 09:56:04 it must bee sda1 that is my unslung disk Dec 30 09:56:20 if I understund it right Dec 30 09:56:27 yes, it is Dec 30 09:56:48 oki Dec 30 09:56:49 actually the other one seems pretty empty .... Dec 30 09:56:55 mm Dec 30 09:57:10 to be safe, just unplug the 2nd and reboot Dec 30 09:57:12 i just moved allot from it Dec 30 09:57:17 mm Dec 30 09:57:21 I´l do that Dec 30 09:57:27 tnx for the tips :) Dec 30 09:57:38 my pleasure Dec 30 10:00:03 I think the nslu2 is super cool ... I have never worked with *inux before but it is very interesting and fun ... to much you wwant to try ;) Dec 30 10:01:34 there's a lot of fun in it. If you are new I would suggest a good book Dec 30 10:01:44 jepp Dec 30 10:01:47 I have one :) Dec 30 10:02:21 and I have google and forums and stuff and ofcourse you ;) Dec 30 10:03:12 warning: my nslu2 was a major time consumer for me the last half a year or so Dec 30 10:03:24 caplink helped me yesterday with some syslog stuff and now I logg averything from my checkpoint firewall to my nslu2 Dec 30 10:03:25 hehe Dec 30 10:03:45 I think I´m going to use alot of time to on mine :) Dec 30 10:04:16 enjoy Dec 30 10:04:29 need a reboot, cu later Dec 30 10:04:31 tnx i will Dec 30 10:04:34 cya Dec 30 11:27:13 morning Dec 30 11:27:41 morning Dec 30 11:27:55 or evning 19:23 here ;) Dec 30 11:28:09 same here Dec 30 11:28:44 I can't ipkg install because the filesystem is read-only Dec 30 11:28:55 do u have any idea? Dec 30 11:32:26 Boomcar, wait a while Dec 30 11:32:35 if the fs is ro, this can be because fsck is running Dec 30 11:32:41 wow Dec 30 11:32:43 you can also see this with ps I assume Dec 30 11:32:48 lol Dec 30 11:33:06 what's the ps command: ps ? Dec 30 11:33:20 ps it is Dec 30 11:33:25 ps -ax Dec 30 11:33:52 it'll list every process Dec 30 11:33:53 usr/sbin/USB_Detect Dec 30 11:34:02 2 times is that ok? Dec 30 11:34:38 yes, I think so, I'm not on unslung, but I seem to recall that there is one process per usb port Dec 30 11:34:54 usr/sbin/do_umount Dec 30 11:35:00 is this normal? Dec 30 11:35:21 no, unless it is waiting to umount in order to remount rw Dec 30 11:35:33 don't know if it can do this if you are using the fs Dec 30 11:35:34 no fsck Dec 30 11:35:45 perhaps try a reboot Dec 30 11:35:55 I hate reboots ;o( Dec 30 11:36:01 using /sbin/reboot or so Dec 30 11:36:07 The last time I did that Dec 30 11:36:17 the hd wasn't recognised anymore Dec 30 11:36:34 that is only if you reboot by power cycling Dec 30 11:36:36 but I will give it a try once more Dec 30 11:36:43 ic Dec 30 11:36:56 THAT'S the problem! Dec 30 11:36:59 and typically you can mount manually and remove the .recovery in the root fs Dec 30 11:37:17 this goes beyond me,.... Dec 30 11:37:23 rebooting by power cycling will force a file system check Dec 30 11:37:24 but I will reboot now Dec 30 11:37:28 good luck Dec 30 11:37:33 k Dec 30 11:37:50 thnx Dec 30 11:37:52 ;) Dec 30 11:37:59 yw Dec 30 11:38:32 it says it's going down, but it isn't Dec 30 11:38:34 ! Dec 30 11:38:48 might take a little time Dec 30 11:39:33 still Dec 30 11:39:52 hmm, then it is waiting for a process to finish Dec 30 11:39:57 perhaps the umount Dec 30 11:40:10 i'm not really an expert on unslung Dec 30 11:40:23 stil ;( Dec 30 11:41:28 did it say it was going down immediately? Dec 30 11:41:42 The system is going down NOW !! Dec 30 11:41:46 it said Dec 30 11:41:51 immediately Dec 30 11:42:18 you might try shutdown -n Dec 30 11:42:31 otherwise I'm out of ideas Dec 30 11:42:43 Boomcar, these are all running processes of a unslung slug ( http://pastebin.com/484411 ) Dec 30 11:42:50 thnx Dec 30 11:42:56 it still isn't down Dec 30 11:43:02 pull the plug? Dec 30 11:43:03 so you see do_umount also Dec 30 11:43:35 after how many minutes (after reboot) the disk remain mount ro ? Dec 30 11:44:13 2 hours Dec 30 11:44:25 thats too much Dec 30 11:44:34 I don't see usb detect...in pastebin Dec 30 11:44:48 15 minutes maybe alright, depends on the size of your data partition Dec 30 11:45:02 I could ipkg update Dec 30 11:45:14 so I thought: why not install apache Dec 30 11:45:19 mmmm Dec 30 11:45:26 only errors Dec 30 11:46:04 caplink u don't have sbin/usbdetect running Dec 30 11:46:07 right? Dec 30 11:46:09 maybe that i kill usb_detect last time when i try to do some researches witk eFfeM about his problem (originally this you've yesterday) Dec 30 11:46:20 ic Dec 30 11:46:29 should I pull the plug now? Dec 30 11:46:41 the powerbutton isn't working either Dec 30 11:46:48 mmm Dec 30 11:46:53 some action on the disc? Dec 30 11:46:54 Maybe the button is Dec 30 11:47:07 nope the disk remains still Dec 30 11:47:12 quiet Dec 30 11:47:29 have you shell access right now, or is the telnet session closed Dec 30 11:47:30 the powerbutton doesn't do the job ;( Dec 30 11:47:40 its closed Dec 30 11:47:59 can't connect either Dec 30 11:48:00 so no sync;sync; ok, pull the cord Dec 30 11:48:07 ;( Dec 30 11:48:19 better, pull the plug Dec 30 11:48:35 or my hair ;) Dec 30 11:48:57 lucky guy, if there is anything on your head that you can pull ;) Dec 30 11:49:00 it's booting with the hd attached Dec 30 11:49:10 let's see if it boots totally Dec 30 11:49:17 it does Dec 30 11:49:19 ! Dec 30 11:49:40 state of the disk? Dec 30 11:49:56 it was too fast.. Dec 30 11:50:04 I have to login the management console (webI) with the default admin pass?!!!) Dec 30 11:50:15 admin/admin it is Dec 30 11:50:24 yes Dec 30 11:50:28 not formated Dec 30 11:50:45 again Dec 30 11:50:51 but recognised Dec 30 11:50:56 yes Dec 30 11:51:00 I guess Dec 30 11:51:12 have to go now, back in 3-4 hours, much luck Dec 30 11:51:18 I think the NSLU2 is going to learn to fly ;P Dec 30 11:51:25 thnx Dec 30 11:51:27 c ya Dec 30 11:51:35 rename the fdisk executable, and then "re-format" under windows interface Dec 30 11:51:50 rename the fdisk exe? Dec 30 11:52:02 wait, i send you an empty package with my adress on it, then your slug can fly in that package Dec 30 11:52:09 it won't repartition that way Dec 30 11:52:46 only do that if you've backed up data, etc... though Dec 30 11:52:56 no data on the disk Dec 30 11:53:01 it's empty Dec 30 11:53:17 oh, so you can re-format and go from there? Dec 30 11:53:25 * caplink811_log thinks, Boomcar catch one of the best men on that job Dec 30 11:53:28 or maybe I should just read the backlog first Dec 30 11:53:34 Caplink: can't you just move to Rotterdam ;o) Dec 30 11:54:25 ByronT: powerloss / not recognised disk/ reformat / reflash / reformat / unslung / fs = read only Dec 30 11:55:25 and when I do df: /dev/mtdblock4 6528 5328 1200 82% / Dec 30 11:55:30 is all I get Dec 30 12:16:58 evening boomcar Dec 30 12:17:06 evening Dec 30 12:17:16 Want to have a slug? Dec 30 12:17:19 so it was powerloss which caused these probs? Dec 30 12:17:25 I'm throwing it out ;) Dec 30 12:17:30 yes Dec 30 12:17:36 I'm living in Finland :P but yes please Dec 30 12:17:41 thnx my little girl Dec 30 12:17:46 luv you Dec 30 12:17:48 ;o) Dec 30 12:17:54 what happened? Dec 30 12:18:03 she pulled the powercord Dec 30 12:18:19 now I am reformating it in windows Dec 30 12:18:34 couldn't do it with nslu2 gui? Dec 30 12:18:42 nope Dec 30 12:18:46 formating.... Dec 30 12:18:50 not formated Dec 30 12:19:03 I had it running this evening Dec 30 12:19:05 oonly Dec 30 12:19:18 the filesystem remains read-only Dec 30 12:19:26 so no ipkg install Dec 30 12:20:04 but it recognizes it? Dec 30 12:20:14 yes Dec 30 12:20:36 hm, I'd have booted without hdd and mounted manually - atleast tried Dec 30 12:20:57 there were no data on it... Dec 30 12:21:46 even better, mkfs.ext3 then Dec 30 12:22:02 no partition either? Dec 30 12:22:03 ? Dec 30 12:22:11 I reformated now Dec 30 12:22:15 ok Dec 30 12:22:17 now to the nslu2 Dec 30 12:22:20 ps Dec 30 12:22:30 what I think is weird Dec 30 12:22:39 I reflashed the firmware Dec 30 12:22:48 and still got the same ip adres Dec 30 12:22:52 ? Dec 30 12:22:57 is this normal? Dec 30 12:23:17 where did you get your ip from? ISP? Dec 30 12:23:27 or do you have your own firewall Dec 30 12:23:31 no I mean on the slug Dec 30 12:23:35 it's static Dec 30 12:23:49 ah, what was the ip then? Dec 30 12:24:03 192.168.0.101 Dec 30 12:24:17 fck Dec 30 12:24:21 hm? Dec 30 12:24:23 it won't format Dec 30 12:24:32 on nslu2? Dec 30 12:24:55 yes Dec 30 12:25:26 so you booted without hdd? Dec 30 12:25:32 forget it :P Dec 30 12:25:34 stupid me Dec 30 12:25:53 what does df say now Dec 30 12:26:04 it's all down now Dec 30 12:26:12 1 booting the slug Dec 30 12:26:17 ok Dec 30 12:27:06 mmm Dec 30 12:27:09 ? Dec 30 12:27:12 slug won't boot Dec 30 12:27:14 anymore Dec 30 12:27:17 it Dec 30 12:27:18 is Dec 30 12:27:19 without hdd? Dec 30 12:27:23 yes Dec 30 12:27:29 it's booting Dec 30 12:27:37 booted Dec 30 12:27:50 at the prompt now? Dec 30 12:27:58 nope Dec 30 12:28:02 webgui Dec 30 12:28:07 enable telnet Dec 30 12:28:17 is Dec 30 12:28:21 putty Dec 30 12:28:21 now Dec 30 12:28:32 logged as root? Dec 30 12:28:40 yes Dec 30 12:28:48 dev/mtdblock4 6528 5328 1200 82% / Dec 30 12:28:49 attach the hdd wait a sec and type df Dec 30 12:28:51 ok Dec 30 12:28:51 one line Dec 30 12:28:59 it is supposed to be 3 lines Dec 30 12:29:03 I guess Dec 30 12:29:04 is the hdd now attached? Dec 30 12:29:10 no Dec 30 12:29:16 attach? Dec 30 12:29:18 yes Dec 30 12:29:32 its prutteling Dec 30 12:29:35 ? Dec 30 12:29:46 dutch/english mixed Dec 30 12:29:55 now familiar with that specific word :P doesn't sound too promising though Dec 30 12:30:01 ;) Dec 30 12:30:06 now=not Dec 30 12:30:07 not recognised Dec 30 12:30:13 ok, easy does it :P Dec 30 12:30:18 df gives me the same line Dec 30 12:30:29 how about fdisk -l /dev/sda Dec 30 12:30:51 ByronT told me to rename fdisk Dec 30 12:30:58 have to rn it back Dec 30 12:30:59 wait Dec 30 12:31:37 fat 16 Dec 30 12:31:38 ! Dec 30 12:31:41 the disk Dec 30 12:31:46 just give me the lines Dec 30 12:31:48 I haven't formated Dec 30 12:31:58 dev/sda1 * 1 24792 199141708+ 6 FAT16 Dec 30 12:32:04 1 line Dec 30 12:33:10 oof... you need the normal fdisk back if you reformatted with windows Dec 30 12:33:10 we could try manual partitioning Dec 30 12:33:32 I had another reason for having you rename fdisk... Dec 30 12:33:48 mmm Dec 30 12:33:49 now Dec 30 12:33:56 can I reformat? Dec 30 12:34:02 with the slug/ Dec 30 12:34:05 ? Dec 30 12:34:16 primarily to keep from waxing stuff already on the disk, but then you said that nothing was on the disk ie - no reason to rename or stop using the norm fdisk Dec 30 12:34:17 I think you should remove the partitioning altogether Dec 30 12:34:26 and let the gui handle it Dec 30 12:34:42 how? Dec 30 12:34:44 yes, go ahead and reformat with the slug (gui) and make sure that fdisk is back and happy Dec 30 12:34:59 I just renamed it back Dec 30 12:35:10 byron: does gui take care of old partitioning? Dec 30 12:35:39 when I format in the webgui something happens with my hd Dec 30 12:35:46 that was not the case b4 Dec 30 12:37:02 boomcar: ah, this fdisk is strickly for command line use? Dec 30 12:37:09 hello, I'm trying to build mldonkey on a DebianSlug but the ./configure fails with: Invalid configuration `armv5teb-unknown-linux-': system `' not recognized Dec 30 12:37:11 sorry :P meant that for byron Dec 30 12:37:25 the gui uses the fdisk Dec 30 12:37:54 there isn't a switch for removing a table? Dec 30 12:38:03 snotling: maybe #debonaras might be a better channel? Dec 30 12:38:19 it's still formatting ;o) Dec 30 12:38:45 ByronT: thanks, I didn't know this channel ! Dec 30 12:39:38 what should I do when it's finished? Dec 30 12:39:44 reboot the hd? Dec 30 12:39:48 the slug? Dec 30 12:39:51 both? Dec 30 12:40:53 does it recognize it now? Dec 30 12:41:03 what does df say Dec 30 12:41:05 still formatting Dec 30 12:41:26 then do nothing but wait ;P Dec 30 12:41:32 wow it's going insane now Dec 30 12:41:37 the hd speeds max Dec 30 12:41:46 that's been a long time ago Dec 30 12:41:49 take cover Dec 30 12:41:51 ;P Dec 30 12:41:56 lol Dec 30 12:42:57 formated Dec 30 12:43:00 mmmm Dec 30 12:43:04 reboot the hd? Dec 30 12:43:12 why`if it shows up on df Dec 30 12:43:25 it does Dec 30 12:43:31 then just unslung Dec 30 12:43:36 k Dec 30 12:43:44 keep it crossed Dec 30 12:43:51 my what? :P Dec 30 12:44:32 sbin/unslung disk1? it was? Dec 30 12:44:42 which port you're using? Dec 30 12:44:47 1 Dec 30 12:44:53 then 1 Dec 30 12:45:31 sbin: no such file or dir!! Dec 30 12:45:42 unsling Dec 30 12:46:02 sure Dec 30 12:46:04 /sbin/unsling Dec 30 12:46:13 of course Imean Dec 30 12:46:16 that / is important - if you're not currently at root level Dec 30 12:46:30 It's finished Dec 30 12:46:31 now? Dec 30 12:46:35 passwd? Dec 30 12:46:39 yes Dec 30 12:46:45 then Dec 30 12:47:00 copy to? Dec 30 12:47:04 cp /etc/passwd /share/hdd/conf Dec 30 12:47:19 k Dec 30 12:47:25 reboot the slug? Dec 30 12:47:50 check that: cat /etc/passwd and cat /share/hdd/conf/passwd give you the exact same Dec 30 12:48:26 if that's true then reboot Dec 30 12:48:51 with hdd attached Dec 30 12:48:55 yes Dec 30 12:48:58 but that you already knew :P Dec 30 12:48:59 it going to Dec 30 12:49:17 keep them crossed again Dec 30 12:49:19 ;) Dec 30 12:49:22 I will Dec 30 12:50:12 I'd suggest UPS - not for the children but for the occasional power outtages Dec 30 12:50:17 I did 1 thing not the way I did it b4 Dec 30 12:50:24 I bought 1 Dec 30 12:50:25 ;o) Dec 30 12:50:31 ah :P nice Dec 30 12:50:48 When (windows) formatting was complete I set the partition active Dec 30 12:50:57 And I didn't do that b4 Dec 30 12:50:59 maybe Dec 30 12:51:09 that solves my problem? Dec 30 12:51:16 still booting Dec 30 12:52:03 It won't Dec 30 12:52:10 the upper led remains out Dec 30 12:52:19 for quite a long time now Dec 30 12:52:49 off Dec 30 12:53:22 it's not booting Dec 30 12:53:26 give it time Dec 30 12:53:28 I am sure Dec 30 12:53:33 I will Dec 30 12:53:33 you're awfully jumpy :P Dec 30 12:53:49 I am working on this for a week now!! Dec 30 12:54:09 I will let time do it's job....and watch a movie Dec 30 12:54:18 tomorrow anther day.... Dec 30 12:54:23 another* Dec 30 12:54:24 you got another comp? Dec 30 12:54:31 yes Dec 30 12:54:33 why? Dec 30 12:56:50 when it's not working I will reflash and reformat tomorrow Dec 30 12:56:54 I guess Dec 30 12:56:58 still no ping? Dec 30 12:57:35 nope Dec 30 12:57:45 which ip you're trying Dec 30 12:58:14 I am calling it a night...thnx for your help...tomorrow I will redo all the things u said....thnx a lot Dec 30 12:58:21 goodnight Dec 30 12:58:44 night Dec 30 13:03:54 Replace Linksys with Unslung? Dec 30 13:05:08 Two hours ago (!) I start the Unslung firmware upgrade... Dec 30 13:08:19 ? Dec 30 13:11:16 Is this time normal? Dec 30 13:28:33 eovermeer: no Dec 30 13:28:54 which method you use? Dec 30 14:49:02 morning ;( Dec 30 14:51:45 can anyone give me some advice? Dec 30 14:56:01 willjasen:? Dec 30 14:56:46 yeah, im trying to run ctorrent using screen Dec 30 14:56:54 but nothing i do works Dec 30 14:58:10 Asking the question works better! Dec 30 14:58:38 how do you think i can get this working? Dec 30 14:58:53 What are you running? Dec 30 14:59:06 unslung Dec 30 14:59:27 version 5.x Dec 30 14:59:29 Does screen work? Dec 30 14:59:48 ive not tested with any other program, so im not sure Dec 30 15:00:38 Lets make sure first that screen works. Dec 30 15:01:03 Unfortionatly i don't no anything about ctorrent so thats all i can do Dec 30 15:01:10 i justed tested with ping, and it works with it Dec 30 15:02:05 i think it may be screen because ctorrent run by itself works Dec 30 15:02:18 i just want to continue running it when i exit the terminal though Dec 30 15:03:20 Just a quick test Dec 30 15:04:03 Verify that there are no screens running (ps -ef | grep screen) Dec 30 15:04:26 nope, no screens running Dec 30 15:05:32 Start screen and run "sleep 3600" Dec 30 15:06:24 just any screen or screen with ctorrent? Dec 30 15:06:48 Start a new screen and just start the sleep 3600 Dec 30 15:07:11 ok Dec 30 15:08:07 Then pres "A d" Dec 30 15:08:48 ok Dec 30 15:09:03 You should see "[detached]" Dec 30 15:09:11 after that log out Dec 30 15:09:36 Login and run "screen -d -r" Dec 30 15:10:02 You should see your "sleep" still running. Dec 30 15:10:13 The same should work for ctorrent as well. Dec 30 15:11:03 i dont see sleep running Dec 30 15:12:15 You should get back the seem window you left before the "A d" Dec 30 15:12:50 DId you see the '[detached]" Dec 30 15:12:55 no Dec 30 15:13:10 just the ^A and the d Dec 30 15:13:22 are you sure you have your screen running? Dec 30 15:13:31 Probably that's the place where you make the mistake Dec 30 15:14:56 You should press the "CONTROL BUTTON" and at the same time the "A" Dec 30 15:15:06 After that you should press the "d" Dec 30 15:15:55 it's not working at all Dec 30 15:15:59 still gives the same thing Dec 30 15:16:19 try closing the terminal you're using - then it should detach automaticly Dec 30 15:16:44 Do you see the welcome message after starting screen? Dec 30 15:17:04 no, just please select a terminal type Dec 30 15:17:07 ah Dec 30 15:17:50 export TERM=linux (for example) first Dec 30 15:18:01 then try screen again Dec 30 15:18:25 screen version blah blah and welcome message now :) Dec 30 15:18:42 now it should work ok Dec 30 15:23:21 yes, now it works, ctorrent runs in background :) thanks marceln and drif Dec 30 15:24:41 willjasen: add that export line to profile as well Dec 30 15:25:13 how? Dec 30 15:25:28 sorry, im not much into linux, though i should be Dec 30 15:25:55 well, using vi for example - it's not that hard to learn the basics Dec 30 15:26:13 i know about vi Dec 30 15:26:16 ok Dec 30 15:26:21 but where's the profile located at? Dec 30 15:26:41 /etc/profile that's symlink to /opt/etc/profile Dec 30 15:26:56 so edit either one Dec 30 15:29:46 Do you use "telnet" or "ssh" to login to the slug? Dec 30 15:30:00 ssh Dec 30 15:30:20 i use telnet, but ill get around to adding ssh Dec 30 15:31:17 That's the problem. Dec 30 15:31:52 Normally the sshd will set your terminal. Dec 30 15:32:10 Also the sshd is patched to include "/opt/bin" in the path. Dec 30 22:57:54 can anyone help me? Dec 30 23:18:36 hello ? Dec 30 23:25:08 Anyone willing to help about dealing with shares in Windows ? Dec 30 23:34:13 I created a share that can be accessed by a user with password but I can't seem being able to access it from windows Dec 30 23:57:17 anyone ? Dec 31 01:54:57 morning Dec 31 01:55:13 Boomcar, you have installed unslung but you haven't unslinged yet Dec 31 01:55:17 is that correct Dec 31 01:55:32 I did the firmware upgrade again Dec 31 01:55:39 I reformated the drive Dec 31 01:55:46 are you now on linksys sw or on unslung sw Dec 31 01:55:53 and didn't unsling because I even can't create a user Dec 31 01:56:05 well Dec 31 01:56:22 when I open my webif i see unslung BUT Dec 31 01:56:44 when I go into the admin section i see Linksys firmware Dec 31 01:57:46 ok, when you log in do you have a file called /etc/fstab or /opt/etc/fstab Dec 31 01:58:17 can you put the output of ps and the content of that file in www.pastebin.com Dec 31 01:58:19 etc/fstab Dec 31 01:58:43 both Dec 31 01:59:21 its in there Dec 31 01:59:28 url? Dec 31 01:59:34 almost Dec 31 01:59:43 got it already Dec 31 01:59:57 k Dec 31 02:00:17 http://pastebin.com/485112 Dec 31 02:00:32 yes Dec 31 02:00:57 can you also post both your fstabs Dec 31 02:01:08 first my dmesg! Dec 31 02:01:28 http://pastebin.com/485114 Dec 31 02:01:35 watch and shiver Dec 31 02:01:56 ok. your ps looks quite good Dec 31 02:02:06 how do I fstabs Dec 31 02:02:45 log in the slug, do cat /etc/fstab then cut and paste Dec 31 02:03:01 ditto for /opt/etc/fstab, you can c&p them in one msg Dec 31 02:03:13 but your dmesg looks pretty bad! Dec 31 02:04:32 mmm kids woke up.....so I have got 2 minutes 2 go ;o( Dec 31 02:04:33 cat: /opt/etc/fstab: No such file or directory Dec 31 02:06:03 i've updated http://pastebin.com/485114 with two comments, your disk has serious problems and that is causing it being mounted ro Dec 31 02:06:53 your fstab is ok, it is your harddisk that is causing errors Dec 31 02:07:03 thought so Dec 31 02:07:09 can I fix it? Dec 31 02:07:21 in windows / or with a live cd? Dec 31 02:07:21 either it is a lousy harddisk or the disk is not supported (I would expect the former though) Dec 31 02:07:30 what hd is it? type Dec 31 02:07:30 maxtor Dec 31 02:07:42 worked till she pulled the plug Dec 31 02:07:47 is it a usb maxtor? Dec 31 02:07:54 in a usb case Dec 31 02:07:55 or do you use a separate usb enclosure Dec 31 02:07:59 yes Dec 31 02:08:44 you bought the maxtor including the enclosure and it is a maxtor enclosure Dec 31 02:08:47 I think I am buying a new enclosure and pull a small hd out of my server .. Dec 31 02:09:01 (it is also possible to mount a maxtor hd in your own enclosure) Dec 31 02:09:03 no it isn't its a seperate Dec 31 02:09:18 ah ok, what is the brand of the enclosure? Dec 31 02:09:26 think sweex Dec 31 02:09:34 looks like it Dec 31 02:09:52 there is something in the wiki on what enclosures are supported, this could make a difference Dec 31 02:10:01 ic Dec 31 02:10:12 (i have a conceptronics, was about eur 20 in eindhoven (you're in rotterdam isn't it) Dec 31 02:10:13 buty everything worked fine! Dec 31 02:10:22 yes Dec 31 02:10:28 yeah, pulling the plug might have caused the disk problem. Dec 31 02:10:33 conceptronics? Dec 31 02:10:35 k Dec 31 02:10:38 You probably need to reformat the disk Dec 31 02:10:49 did that 15 times! Dec 31 02:10:50 don't think the enclosure is your problem since things worked Dec 31 02:11:04 using the web if I assume Dec 31 02:11:20 1. windows ntfs / fat Dec 31 02:11:22 the webif Dec 31 02:11:26 then* Dec 31 02:11:37 you could try with another hd (probably with the same enclosure) Dec 31 02:11:45 does it work ok under windows? Dec 31 02:11:51 or screw it out and format it in dos? Dec 31 02:11:56 mmm Dec 31 02:11:59 think so Dec 31 02:12:05 didn't try Dec 31 02:12:45 format in dos also seems a good option Dec 31 02:12:56 and maybe someone else can make sense of this: Dec 31 02:12:59 but a lot of screwing ;o( Dec 31 02:13:07 # Dec 31 02:13:08 Raw sense data:0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Dec 31 02:13:08 # Dec 31 02:13:08 I/O error: dev 08:02, sector 1626 Dec 31 02:14:14 mmm still one week vacation... Dec 31 02:14:38 tomorrow I think I will be using my screwdriver ;o( Dec 31 02:14:43 ok, good luck .... I'm quite sure it is the harddisk.... Dec 31 02:14:51 me too ;o( Dec 31 02:15:07 good, grab some coffee, catch you later ... Dec 31 02:15:11 have to go.... Dec 31 02:15:13 c ya Dec 31 02:38:26 msg bazz- server is hier vast gelopen .. maar ik ga hem terug zetten naar een camx server ik geef je zo de nieuwe regel Dec 31 02:38:41 sorry ... Dec 31 02:47:04 bazz-: i sent you a pm .. Dec 31 02:47:17 goodmorning all **** ENDING LOGGING AT Sat Dec 31 03:00:44 2005