**** BEGIN LOGGING AT Fri Jan 06 02:59:57 2006
Jan 06 07:01:32 <caplink811_log> Boomcar,  where is the problem with <cr><lf>?
Jan 06 07:01:52 <Boomcar> I am configuring xmail
Jan 06 07:02:03 <Boomcar> and I needed to know what that meant
Jan 06 07:02:14 <caplink811_log> in which context?
Jan 06 07:02:41 <Boomcar> I need to eter the data and end with <CR><LF>
Jan 06 07:03:14 <Boomcar> "admin"<tab><enc. password><cr><lf>
Jan 06 07:04:14 <Boomcar> Ensure, that the last line in ctrlaccounts.tab is termined with a CR/CRLF, otherwise XPAI/PHP might hang
Jan 06 07:04:15 <caplink811_log> is that in a config file?
Jan 06 07:04:21 <Boomcar> Yes
Jan 06 07:04:39 <Boomcar> ctrlaccounts
Jan 06 07:05:38 <caplink811_log> hm, in unix, any editor puts a <lf> at the end of a line, when you hit return, in dos/win any editor puts <cr><lf> at the end
Jan 06 07:06:08 <Boomcar> then I only shoud make 2 returns
Jan 06 07:06:29 <Boomcar> Now I only need xmcrypt
Jan 06 07:06:48 <Boomcar> should be part of the package, but I can't find it ;(
Jan 06 07:07:35 <caplink811_log> you can take a hex editor and enter 0xa and 0xd at the end of the file, that is equal to <cr><lf>
Jan 06 07:07:59 <Boomcar> ok thnx
Jan 06 07:08:28 <Boomcar> Do you know if xmcrypt is available for windows?
Jan 06 07:08:49 <Boomcar> I have been googling around for a while bujt I can't find it..
Jan 06 07:08:56 <wallycharlo> have installed ftp, and am able to successfully ftp from slug to other machines. however, when i try to ftp into the slug from another machine, the password i set is not valid ... do i need to set another password ? 
Jan 06 07:08:57 <caplink811_log> dunno what xmcrypt is..
Jan 06 07:09:13 <Boomcar> encrypts passwords for xmail
Jan 06 07:09:39 <caplink811_log> wallycharlo,  what kind og ftp server have you installed?
Jan 06 07:10:01 <caplink811_log> Boomcar,  so you should search at the xmail authors site
Jan 06 07:10:20 <Boomcar> I did....np I will find it
Jan 06 07:10:23 <Boomcar> thnx again
Jan 06 07:12:28 <wallycharlo> not too sure .... how can i check 
Jan 06 07:14:39 <caplink811_log> try -> ps -ef  and search the output for something with *ftp* in it, maybe ftpd or proftpd or vsftpd
Jan 06 07:17:04 <wallycharlo> no process listed for ftp ... when i start ftp i get a process named just ftp ... i also see nothing about ftp under ipkg list_installed
Jan 06 07:19:32 <caplink811_log> ftp client is a part of inetutils
Jan 06 07:20:19 <caplink811_log> and gnu ftpd should too
Jan 06 07:20:46 <wallycharlo> inetutils i have defo installed 
Jan 06 07:21:57 <caplink811_log> have you read that page in the wiki ? http://www.nslu2-linux.org/wiki/HowTo/SetupFtpd
Jan 06 07:23:00 <wallycharlo> hang on i will take a look 
Jan 06 07:26:46 <wallycharlo> step 3 returns an error ... 'ipkg inetutils' ... is there a command missing ? 
Jan 06 07:27:50 <caplink811_log> step below Note: has the correct syntax
Jan 06 07:28:03 <caplink811_log> step 3 below Note: has the correct syntax
Jan 06 07:29:31 <wallycharlo> package already installed ... 
Jan 06 07:29:49 <wallycharlo> cannot do setp 4 as i have no file call arm* in /opt/libexec
Jan 06 07:30:07 <caplink811_log> step 4 below Note: has the correct syntax
Jan 06 07:30:22 <wallycharlo> i have a file called tftpd in this path 
Jan 06 07:30:36 <wallycharlo> not ftpd
Jan 06 07:31:19 <wallycharlo> will i do thsi 
Jan 06 07:31:30 <wallycharlo> cp /opt/libexec/tftpd /bin/tftpd
Jan 06 07:31:36 <caplink811_log> that isn't the right file
Jan 06 07:32:21 <wallycharlo> rexecd  rlogind  rshd  syslogd  talkd  telnetd  tftpd  uucpd
Jan 06 07:32:35 <wallycharlo> thsi is what i have in /opt/libexec
Jan 06 07:33:01 <caplink811_log> when you enter -> ipkg files inetutils, the responds is a list with all files in that oackage, there should be /opt/libexec/ftpd when it isn't then the package maintainer has decided that ftpd isn't supported anymore and you should install another server
Jan 06 07:34:20 <wallycharlo> no there is no ftpd in this listing 
Jan 06 07:34:44 <wallycharlo> only /opt/bin/ftp and /opt/libexec/tftpd
Jan 06 07:37:32 <wallycharlo> would you recommend that i install a different ftp, and if so can you tell me which package i could install ? 
Jan 06 07:40:07 <Haile> hi there
Jan 06 07:40:18 <caplink811_log> so there isn't a ftp-server is that package. you can install vsftpd or proftpd, there are howto pages for both in the wiki
Jan 06 07:40:54 <wallycharlo> but there is /opt/bin/ftp , and i have been using this succesfully from the nslu2  ? 
Jan 06 07:41:00 <wallycharlo> it works 
Jan 06 07:41:11 <wallycharlo> i just cant login from outside 
Jan 06 07:41:21 <Haile> i've a NSLU2, curently running R63 with one NTFS drive attached and everything working great...but i can not set up any security features..which is quite anoying
Jan 06 07:41:38 <caplink811_log> /opt/bin/ftp is a client, on the serverside you need a server process which answers ftp requests
Jan 06 07:41:53 <Haile> i wondered if any of you know how to unslung that on my 256 Mb flash USB key and get the NTFS support as well as other features
Jan 06 07:42:14 <wallycharlo> ah ok ... then ill take a look to what you suggest ... and will prob be back ! .... thanks a million for the help. bye for now
Jan 06 07:44:09 <caplink811_log> Haile,  there is at least one page in the wiki which covers the 1st topic, and there are some mails at the mailing list about the 2nd part of your question (but this part is experimental)
Jan 06 07:44:38 <caplink811_log> mailing lists are at http://groups.yahoo.com/group/nslu2-linux/messages or
Jan 06 07:44:48 <caplink811_log> http://groups.yahoo.com/group/nslu2-general/messages
Jan 06 07:47:03 <caplink811_log> basically you should read this post http://groups.yahoo.com/group/nslu2-linux/message/9718
Jan 06 07:57:48 <wallycharlo>  only_from      = localhost 192.168.0.0/24
Jan 06 07:58:12 <wallycharlo> does this mean all ips from 192.168.0.1 to 192.168.0.24 ? 
Jan 06 07:58:36 <wallycharlo> ie , allow a range of IPs ? 
Jan 06 08:02:48 <caplink811_log> http://en.wikipedia.org/wiki/Classes_of_IP_addresses
Jan 06 08:10:08 <wallycharlo> http://en.wikipedia.org/wiki/Classes_of_IP_addresses
Jan 06 08:10:31 <wallycharlo> The users must have a home directory in their /etc/passwd entry to log in. The directory does not have to exist if DefaultRoot is set.
Jan 06 08:10:38 <wallycharlo> not sure what this means ??
Jan 06 08:16:34 <caplink811_log> http://minnie.tuhs.org/UnixTree/V3/usr/man/man5/passwd.5.html
Jan 06 08:17:25 <caplink811_log> bbl
Jan 06 12:44:45 <pumpkin0> hello everybody. How do i save in vim ? :x is not working ... 
Jan 06 12:50:29 <pumpkin0> Okay, when which ipkg-package contains "top" ?
Jan 06 13:01:00 <caplink811_log> pumpkin0,  procps (you knw about http://ipkgfind.nslu2-linux.org/ ?)
Jan 06 13:08:03 <pumpkin0> Thx a lot. I have installed my every first slug today, i didn't know that page..
Jan 06 13:09:15 <caplink811_log> ~nslu2-wiki
Jan 06 13:09:17 <capbot> i heard nslu2-wiki is the short-hand way of saying "Have a look at the NSLU2-Linux Wiki at http://www.nslu2-linux.org/".
Jan 06 13:09:54 <caplink811_log> this is the nslu2-linux homepage, there you can find most informations that you need upon the slug
Jan 06 13:15:06 <pumpkin0> i'm reading that page now, but i'm not 100% up-to-speed yet. That little thing is just cool. sorry in advance for any stupid questions.
Jan 06 15:28:38 <Boomcar> Morning ;)
Jan 06 15:35:03 <Boomcar> Anyone familiar with xmail or phpsysinfo? ;o)
Jan 06 15:44:24 <caplink811_log> whats wrong with phpsysinfo?
Jan 06 15:44:34 <Boomcar> hey caplink
Jan 06 15:44:38 <Boomcar> I dunno
Jan 06 15:45:06 <Boomcar> when I enter the website on my slug apache etc. freezes
Jan 06 15:45:07 <caplink811_log> morning Boomcar, hm, you dunno, but why you ask about it?
Jan 06 15:45:42 <Boomcar> I can't see the site..
Jan 06 15:45:50 <Boomcar> I did a chmod but that doesn't help either
Jan 06 15:47:59 <Boomcar> the phpsysinfo dir has 555 and the rest: too
Jan 06 15:48:09 <Boomcar> do I need to make it 655?
Jan 06 15:53:24 <caplink811_log> that behaviour doesn't depends on accessrights, got the same problem with unslung/php5.0.4, but not with debian/php4.3.10, maybe that anything is in the readme, which i'd not read
Jan 06 15:53:45 <Boomcar> ic
Jan 06 15:53:59 <Boomcar> so this time ....it's not me!
Jan 06 15:54:21 <caplink811_log> had you read the readme in /opt/share/www/phpsysinfo ?
Jan 06 15:54:34 <Boomcar> yes
Jan 06 15:54:53 <Boomcar> the other day Mika was around and he had it working, I thought
Jan 06 15:55:11 <Boomcar> But I haven't seen him since..
Jan 06 16:03:30 <Boomcar> maybe tomorrow...c ya ;)
Jan 06 19:47:55 <kfm82> hey, there, greetings. i just came back to my terminal and saw the module build for gd-2.0.33 fail with errors in the X11 includes. I was trying to build aMule on uNSLUng 5.5 beta.... precompiled packag
Jan 06 19:48:47 <kfm82> shouldn't there be precompiled packages someplace by now, given how common an app amule is? i could not find it in the most recent ipkg feed
Jan 06 19:50:15 <kfm82> i tried compiling wxBase-2.6.2, gd-2.0.33, aMule-2.0.3 as per the instructions in the wiki, albeit those were marked as "openslug related"
Jan 06 19:51:17 <kfm82> feel free to chime in with any comments, i can provide detailed error log if useful
**** ENDING LOGGING AT Sat Jan 07 02:59:58 2006