**** BEGIN LOGGING AT Sat Jan 14 02:59:58 2006 Jan 14 05:11:41 hi Jan 14 05:12:16 i'm looking how to confirm that the root filesystem Jan 14 05:12:16 is being loaded from the external disk. Jan 14 05:12:39 I unsling to a 256 Mb USB flash connected to port 1 Jan 14 05:12:52 I got no error message while running the unsling script Jan 14 05:13:09 # df Jan 14 05:13:10 Filesystem 1k-blocks Used Available Use% Mounted on Jan 14 05:13:10 rootfs 62197 14181 47374 23% / Jan 14 05:13:10 /dev/sda1 6528 5308 1220 81% /initrd Jan 14 05:13:10 /dev/sda1 62197 14181 47374 23% / Jan 14 05:13:10 /dev/sda1 62197 14181 47374 23% /share/hdd/data Jan 14 05:13:14 /dev/sda2 123719 4142 118300 3% /share/hdd/conf Jan 14 05:13:22 here is the result of "df" command Jan 14 05:22:09 Jah_: for so far i can see it is running from your sda1 Jan 14 05:22:25 which means ? Jan 14 05:22:32 i am a newbie, sorry Jan 14 05:22:45 i just followed the steps from the readme Jan 14 05:22:52 and i'm stuck in step 8 Jan 14 05:23:06 you have a usb flash in port 1 and a harddisk in port 2 ? Jan 14 05:23:17 no, port 2 is empty Jan 14 05:23:46 oww yes sorry my fault i did not watch good both is sda Jan 14 05:24:12 and yes you run it now from usbflash Jan 14 05:24:24 it looks you did it good Jan 14 05:24:32 cool Jan 14 05:24:35 :) Jan 14 05:24:46 what is my next step ? Jan 14 05:24:50 ipkg ? Jan 14 05:25:17 /dev/sda* is your first port /dev/sdb* your second port Jan 14 05:25:27 good to know :p Jan 14 05:26:08 and you can see the / (root) and config (/share/hdd/conf) is running form dev/sda Jan 14 05:26:36 yep Jan 14 05:27:01 what about the memory info ? my usb key is 256M but i don't see that much... Jan 14 05:27:36 do "df -h" Jan 14 05:28:00 then you see it in Mb Jan 14 05:29:04 Jah_: did you try df -h now ? Jan 14 05:30:45 # df -h Jan 14 05:30:45 df: invalid option -- h Jan 14 05:30:45 BusyBox v0.60.4 (2004.05.28-07:40+0000) multi-call binary Jan 14 05:30:45 Usage: df [-k] [FILESYSTEM ...] Jan 14 05:31:35 df: invalid option -- h Jan 14 05:31:35 BusyBox v0.60.4 (2004.05.28-07:40+0000) multi-call binary Jan 14 05:31:35 Usage: df [-k] [FILESYSTEM ...] Jan 14 05:31:49 ok that works not at the slug sorry Jan 14 05:37:29 # ipkg update Jan 14 05:37:29 Downloading http://ipkg.nslu2-linux.org/feeds/unslung/cross/Packages.gz Jan 14 05:37:29 Downloading http://ipkg.nslu2-linux.org/feeds/unslung/native/Packages.gz Jan 14 05:37:29 Downloading http://ipkg.nslu2-linux.org/feeds/unslung/oe/Packages.gz Jan 14 05:37:29 An error ocurred, return value: 3. Jan 14 05:37:30 Collected errors: Jan 14 05:37:32 ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp Jan 14 05:37:34 -q -P /tmp/ipkg-vAO6U5 http://ipkg.nslu2-linux.org/feeds/unslung/cross/Packages Jan 14 05:37:36 .gz' Jan 14 05:37:38 ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp Jan 14 05:37:40 -q -P /tmp/ipkg-vAO6U5 http://ipkg.nslu2-linux.org/feeds/unslung/native/Package Jan 14 05:37:42 s.gz' Jan 14 05:37:46 ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp Jan 14 05:37:48 -q -P /tmp/ipkg-vAO6U5 http://ipkg.nslu2-linux.org/feeds/unslung/oe/Packages.gz Jan 14 05:37:50 ' Jan 14 05:37:52 hmmm Jan 14 05:38:07 I think it's because of FTP Passive Mode is not supported by my LAN Jan 14 05:40:32 set up your dns servers? Jan 14 05:40:40 try ping google.com ;) Jan 14 05:40:57 hey bazz-_ :D Jan 14 05:44:06 Jah__: did you read what bazz say ? Jan 14 05:44:20 nope was disconnected Jan 14 05:44:25 13:36 < bazz-_> set up your dns servers? Jan 14 05:44:25 13:36 < bazz-_> try ping google.com ;) Jan 14 05:44:37 gonna try that Jan 14 05:45:24 ./offtopic bazz did u add the new rule in camx ? Jan 14 05:45:32 bingo Jan 14 05:45:47 bingo ? Jan 14 05:45:59 three in a row Jan 14 05:46:40 yep it work now Jan 14 05:46:49 i am just a bit stupid :) Jan 14 05:52:18 Mika__: no not yet :) Jan 14 05:52:48 preparing for exams.. still have to make some files on oracle Jan 14 05:53:01 i'm photoshopping some screenshots Jan 14 05:55:17 just got a question Jan 14 05:55:51 in the pages concerning rootFS on a USB key it is mentioned that the key has to be on port Disk 1 Jan 14 05:56:44 and in the page concerning the NTFS support, it is mentioned that the NTFS drive has to be connected also to drive port 1 Jan 14 05:57:16 which means it is not possible to use uNSLUng on a USB key with NTFS drive at the same time ? Jan 14 06:00:19 ok bazz-_ if you need it contact me and i reply it to you Jan 14 06:00:52 thanks mika Jan 14 06:01:25 Jah__: in theory it should give no problems Jan 14 06:01:43 just try it, i don't think you'll end up with a roasted harddisk or slug ;) Jan 14 06:01:56 Jah__: i dont know about NTFS but why do you not convert it to FAT ? Jan 14 06:03:57 ntfs + linux = dangerous Jan 14 06:06:18 i just need to read Jan 14 06:06:26 i have a 250 Gb full of mp3 Jan 14 06:07:45 i want to set up a streaming server Jan 14 06:07:54 or iTunes i don't know yet Jan 14 06:08:05 to avoid browsing the disk with samba Jan 14 06:14:33 i rebooted with the NTFS on port 2 but it seems recognized.... Jan 14 06:14:47 does not seems*** Jan 14 06:19:31 it will probably not mount automatically Jan 14 06:19:44 try adding a manual entry to fstab and mount it that way Jan 14 06:20:03 note that fstab is re-created on every boot **** BEGIN LOGGING AT Sat Jan 14 06:41:03 2006 Jan 14 06:42:15 or whatever param is used for the permanent setting of the spindown timeout Jan 14 06:48:15 uh yeah Jan 14 07:33:16 i got a problem: when i do unsling Jan 14 07:33:31 here is the end Jan 14 07:33:33 /usr/bin/cpio: /share/flash/data/dev.state/video3: Operation not permitted Jan 14 07:33:33 /usr/bin/cpio: /share/flash/data/var.state/tmp/log: Operation not permitted Jan 14 07:33:33 19020 blocks Jan 14 07:33:33 Linking /usr/bin/ipkg executable on target disk. Jan 14 07:33:33 ln: /share/flash/data/usr/bin/ipkg: Operation not permitted Jan 14 07:33:33 Creating /.sdb1root to direct switchbox to boot from /share/flash/data. Jan 14 07:33:46 it does that error msg for each file Jan 14 07:37:23 i think my usb key is not well formated Jan 14 07:52:30 jah: is your drive mounted? connected to which port? Jan 14 08:04:34 is the flash formatted with the web/if ? Jan 14 08:08:32 nope Jan 14 08:08:41 because not recognized in web Jan 14 08:08:58 but i can see the flash with df in telnet Jan 14 09:00:46 jah did you try looking for flash and unslung on the site in the channel topic? Jan 14 18:53:05 <`skyhawk> Hello all! Jan 14 18:54:43 <`skyhawk> i got a very important question concering unslug 5.5 and php and apache and php module... is there anyway to get gallery and the dam config.php page to work with this config and software? i tried everything i could come up with as a novice linux user.. no luck. tried thttpd+php didnt work either, couldnt get cherokee to work properly either am i out of luck? Jan 14 18:54:59 <`skyhawk> what configuration does work so i can run gallery and the config.php page? Jan 14 23:06:33 hi there, i'm looking for help Jan 14 23:06:48 I followed the steps to unsling my slung Jan 14 23:07:14 i did it on a disk formated via the web/if connected on port 2 Jan 14 23:07:30 but at the reboot step, the ready light just keep down Jan 14 23:07:32 ... Jan 14 23:07:38 any advice ? Jan 14 23:08:33 the slug still boot without any drive attached to it Jan 14 23:10:36 maybe format it on port 1 ? Jan 14 23:10:42 hmm Jan 14 23:11:06 i'll need port 1 to try NTFS in a near future.... Jan 14 23:11:39 did you unsling it to sdb or sda ? Jan 14 23:11:52 and it did not read anything prohibiting from unsling on port 2 Jan 14 23:12:00 i used the script Jan 14 23:12:20 /sbin/unsling disk2 Jan 14 23:12:27 hmm Jan 14 23:12:31 which did not return any erros Jan 14 23:12:49 under telnet i could see the drive Jan 14 23:12:58 and in the web/if also Jan 14 23:13:06 but now nothing Jan 14 23:13:32 did you check if there is a .recovery file in the root filesystem? Jan 14 23:13:35 when i boot with the drive connected....ethernet and disk 2 lights are green but ready is shut down Jan 14 23:13:51 let me check Jan 14 23:14:40 by the way, when i boot with the disk, i cannot stop the slug with the power button...i have to plug it off Jan 14 23:19:29 if the rootfs is "/" Jan 14 23:19:37 then, no Jan 14 23:19:52 # ls -al Jan 14 23:19:52 drwxr-xr-x 1 root root 0 Dec 1 12:54 . Jan 14 23:19:52 drwxr-xr-x 1 root root 0 Dec 1 12:54 .. Jan 14 23:19:52 -rw-r--r-- 1 root root 1 Dec 1 12:54 .sdb1root Jan 14 23:19:52 -rw-rw-r-- 1 root root 25 Jan 1 1970 .unslung Jan 14 23:19:53 drwxrwxr-x 1 root root 0 Jan 1 1970 bin Jan 14 23:19:54 drwxrwxr-x 1 root root 0 Jan 1 1970 dev Jan 14 23:19:58 etc.... Jan 14 23:22:24 EvilDevil_, : do you have any idea ? Jan 14 23:23:41 maybe i can connect the disk Jan 14 23:23:49 and unsling it again ? Jan 14 23:25:54 # df Jan 14 23:25:54 Filesystem 1k-blocks Used Available Use% Mounted on Jan 14 23:25:54 rootfs 6528 5580 948 85% / Jan 14 23:25:54 /dev/mtdblock4 6528 5580 948 85% / Jan 14 23:25:54 /dev/sdb1 195843204 44136 193809420 0% /share/flash/data Jan 14 23:25:55 /dev/sdb2 116661 4142 111315 4% /share/flash/conf Jan 14 23:26:02 once i reconnect the drive Jan 14 23:27:03 # mount Jan 14 23:27:04 /dev/mtdblock4 on / type jffs2 (rw) Jan 14 23:27:04 usbdevfs on /proc/bus/usb type usbdevfs (rw) Jan 14 23:27:04 /dev/sdb1 on /share/flash/data type ext3 (rw) Jan 14 23:27:04 /dev/sdb2 on /share/flash/conf type ext3 (rw,sync) Jan 14 23:38:34 Jah hmm... i'm not sure... did you try to put it in port 1 and do a reboot? Jan 14 23:38:46 nope Jan 14 23:39:16 give it a try... maybe it expects the disk at /share/hdd Jan 14 23:39:18 b ut it is clearly written hat once you unsling on a drive connected to a specific port you should never change it Jan 14 23:39:41 yep...but then it should boot Jan 14 23:39:54 it can't break it ;-) Jan 14 23:39:57 because when i boot it with no drive attached it boots Jan 14 23:47:13 i just noticed something strange Jan 14 23:47:20 i formated the drive on port 1 Jan 14 23:47:23 the reboot Jan 14 23:47:36 and plug it to port 2 Jan 14 23:48:05 when it was on port 1 it was recagnizeb right by web/if...200Gb free Jan 14 23:48:15 now on port 2 it still recognized Jan 14 23:48:20 but with 0 Mb free Jan 14 23:49:18 under telnet it is better Jan 14 23:49:27 the drive is right recognized Jan 14 23:49:35 # df Jan 14 23:49:35 Filesystem 1k-blocks Used Available Use% Mounted on Jan 14 23:49:35 rootfs 6528 5328 1200 82% / Jan 14 23:49:35 /dev/mtdblock4 6528 5328 1200 82% / Jan 14 23:49:35 /dev/sdb1 195843204 32864 193820692 0% /share/flash/data Jan 14 23:49:35 /dev/sdb2 116661 4145 111312 4% /share/flash/conf Jan 15 00:05:12 * EvilDevil 's watching his cat having bad dreams *meeoooow* Jan 15 00:37:18 anyone here can help me ? Jan 15 00:38:56 I went throught all the steps to unslung Jan 15 00:39:08 and after the execution of unsling script Jan 15 00:39:11 + reboot Jan 15 00:39:22 now the slug does not ping anymore.... Jan 15 01:37:58 Is that normal that each time i connect my drive to port2, the web/if show it as 0Mb drive 0% free ? Jan 15 01:42:34 that's a bug i think Jan 15 01:44:20 http://www.nslu2-linux.org/wiki/FAQ/Disk2Showing0Free Jan 15 02:36:22 i would need some help Jan 15 02:36:29 my slug is now perfectly working Jan 15 02:36:41 unsling on drive EXT3 on Port 2 Jan 15 02:36:55 i installed the package for NTFS support Jan 15 02:37:04 but now i am stuck again... Jan 15 02:37:15 the drive does not seems recognized.... Jan 15 02:40:09 have you used insmod as root? Jan 15 02:40:55 jah_: insmod ufsd Jan 15 02:41:20 # insmod ufsd Jan 15 02:41:20 Using /lib/modules/ufsd.o Jan 15 02:41:20 Warning: loading ufsd will taint the kernel: non-GPL license - Commertial product Jan 15 02:41:20 See http://www.tux.org/lkml/#export-tainted for information about tainted modules Jan 15 02:41:22 hmmm Jan 15 02:41:35 is that ok ? Jan 15 02:41:58 well, it basically means - face to (possible) consequences Jan 15 02:42:02 to=the Jan 15 02:42:25 but it should work Jan 15 02:42:39 I haven't used it yet - but I'm planning to Jan 15 02:42:42 so what sould i do next ? Jan 15 02:42:58 did you insmod? Jan 15 02:43:02 ah, you did :P Jan 15 02:43:03 blind me Jan 15 02:43:07 hehe Jan 15 02:43:11 check df Jan 15 02:43:14 what does it say Jan 15 02:43:28 jah_: u know, you really should register your nick here Jan 15 02:43:34 # df Jan 15 02:43:34 Filesystem 1k-blocks Used Available Use% Mounted on Jan 15 02:43:34 rootfs 195843204 50736 193802820 0% / Jan 15 02:43:34 /dev/sdb1 6528 5448 1080 83% /initrd Jan 15 02:43:34 /dev/sdb1 195843204 50736 193802820 0% / Jan 15 02:43:35 /dev/sdb1 195843204 50736 193802820 0% /share/flash/data Jan 15 02:43:37 /dev/sdb2 116661 4148 111309 4% /share/flash/conf Jan 15 02:43:41 i'll do :) Jan 15 02:43:45 jah_: would be easier to help via privatemessages and not to flood this channel Jan 15 02:43:52 sure Jan 15 02:43:57 sorry Jan 15 02:44:00 np Jan 15 02:44:09 you know how to do that? Jan 15 02:44:37 PM ? sure Jan 15 02:44:46 I mean register your nick Jan 15 02:44:50 oh Jan 15 02:44:52 yep Jan 15 02:45:00 i have to, to be able to PM ? Jan 15 02:45:07 yes Jan 15 02:45:36 ok Jan 15 02:45:39 done **** ENDING LOGGING AT Sun Jan 15 02:59:58 2006