**** BEGIN LOGGING AT Wed Feb 08 10:59:58 2006 Feb 08 11:55:33 FB[i]: how is it going ? Feb 08 11:59:02 hehe Feb 08 11:59:05 not good Feb 08 12:03:27 Why ? dd taking to long ? Feb 08 12:17:18 my box died Feb 08 12:17:19 hehe Feb 08 12:17:44 or I cant get to it anymore it answers to ping but not to telnet or web access Feb 08 12:18:02 sorry for the delay on answers ..I´m at work ;) Feb 08 12:19:58 FB[i]: HOW ? it you overclock with a sledgehammer ? Did you fill up the internal flash ? Feb 08 12:24:02 hehehe Feb 08 12:24:12 dont know what happend Feb 08 12:25:02 I just write like you sad and after that it stops answering on telnet and web (dd if=/dev/zero of=/dev/sdb) Feb 08 12:25:37 I have a look at it when I come home Feb 08 12:25:38 In most cases reflashing with a fresh unslug/original FW helps. I just hope you got the disc right and sdb was the new one... Feb 08 12:25:49 hehe Feb 08 12:25:53 hope so too ;) Feb 08 12:26:07 or booting with no disc attached and attaching them later. Feb 08 12:26:16 yepp Feb 08 12:26:34 but no worries I haqve a look at it when I get home :) Feb 08 12:26:43 it will live again :) Feb 08 14:35:22 Hi Feb 08 14:35:34 hey Drif Feb 08 15:32:20 Im home and I got my box up and running again Feb 08 15:32:23 :) Feb 08 15:32:55 what was wrong ? Feb 08 15:33:22 the old disk died again :( Feb 08 15:33:56 now Im doing what you wrote erlier Feb 08 15:34:07 Im on "mkfs.ext3 /dev/sdb1" Feb 08 15:34:32 OK, that's a valid resaon not to boot up. .. get some cofee, 300GB is taking some time... Feb 08 15:34:47 heheh Feb 08 16:18:21 done Feb 08 16:20:31 pm Feb 08 16:21:31 ? yes, back online ? Feb 08 16:21:41 jepp Feb 08 16:21:52 did you get my pm? Feb 08 16:22:07 now it is just the copy part left Feb 08 16:22:11 no, nothing. But i'm behind a irc-proxy... Feb 08 16:22:15 ahh Feb 08 16:22:16 oki Feb 08 16:22:19 nm Feb 08 16:22:37 cp -a /share/hdd/data /mount-point-of-sdb1" and "cp -a /share/hdd/conf /mount-point-of-sdb2". (And do not touch /testing as it is pointing to a freshly repartitioning disc << no good to read from) Feb 08 16:22:45 that is what you wrote before Feb 08 16:23:07 but do I have to do a mount first (mount-point-of-sdb1) Feb 08 16:23:43 np: mkdir /mnt1; mount /dev/sdb1 /mnt1 Feb 08 16:24:34 done Feb 08 16:24:35 Ah, i know where your pm's are going to: "Private messages from unregistered users are currently blocked due to spam problems, but you can always message a staffer." Feb 08 16:24:44 hahah Feb 08 16:24:53 ls -la shows a normal disc with a lost+found-folder ? Feb 08 16:25:16 jepp Feb 08 16:25:27 OK, copy the stuff over. Feb 08 16:25:35 . /dev/sdb1 240190052 32828 227956260 0% /mnt1 Feb 08 16:25:39 oki Feb 08 16:26:11 like cp -a /share/hdd/data /mnt1 Feb 08 16:26:14 and Feb 08 16:26:26 like cp -a /share/hdd/conf /mnt2 Feb 08 16:26:29 or? Feb 08 16:26:44 not so sure, post your df -h again... Feb 08 16:26:52 2 sec Feb 08 16:27:11 http://www.rafb.net/paste/results/GZLdhC86.html Feb 08 16:28:25 ..../data goes to sdb1, .../config to sdb2. And use "cp -avx ..." (if unslung supports it) Feb 08 16:28:51 oki I try Feb 08 16:30:11 cp -avx /share/hdd/data /mnt1 Feb 08 16:30:32 no not -v Feb 08 16:30:54 v is verbose. So no progress-bars for you. Feb 08 16:31:18 and no x Feb 08 16:31:51 damn I have to go Feb 08 16:32:02 hmm... Feb 08 16:32:13 bbl (2 h) Feb 08 16:32:25 cu Feb 08 18:18:17 evening all ... anyone know if there is existing a bit torrent packge for unslung in which you can limit the upload bit rate , like you can on bitcomet Feb 08 18:21:04 wallycharlo: py-bittorrent, but's it pretty heavy on resources Feb 08 18:21:43 thanks, ill try it out Feb 08 18:56:06 back Feb 08 18:57:18 FB[i]: me too. Feb 08 18:57:21 :) Feb 08 18:57:53 How is it going ? slug still alive ? Feb 08 18:58:01 jepp it is alive :) Feb 08 18:58:08 going to start the cp now Feb 08 18:59:39 good. .... why has the channelbot just left.. Feb 08 19:01:09 copying .... Feb 08 19:01:15 I think :) Feb 08 19:08:42 because it's a toy, which running on a slug, and my provider cut the line every 24h Feb 08 19:08:57 morning, btw Feb 08 19:09:29 ois. morning. I had the same problem, but another provider took over... Feb 08 19:23:46 coping done Feb 08 19:24:36 Is it just to disconnect the old disk and connect the new in the old disk place ? Feb 08 19:24:53 after I power the nslu2 down Feb 08 19:25:30 yepp. cross fingers and reboot Feb 08 19:26:27 :) Feb 08 19:27:15 booting... Feb 08 19:28:34 it is alive Feb 08 19:29:34 how do I check if everything when as it should Feb 08 19:30:05 FB[i]: login and run df-h Feb 08 19:30:14 s/df-h/df -h/ Feb 08 19:30:15 pumpkin0 meant: FB[i]: login and run df -h Feb 08 19:30:47 hmm Feb 08 19:31:23 http://www.rafb.net/paste/results/RiTU1u20.html Feb 08 19:31:35 dont think it worked Feb 08 19:32:38 think aloud ... recover-file .... do: mkdir /test; mount /dev/sda1 /test; rm /test/.recover; umount /test/ . repeat with /dev/sda2 Feb 08 19:32:49 and reboot. Feb 08 19:34:28 look at this Feb 08 19:34:29 http://www.rafb.net/paste/results/kw6qRp35.html Feb 08 19:35:39 try sda2. Feb 08 19:35:57 yep Feb 08 19:36:12 that is: umount test and do the same with sda2. Do not overmount /test. Feb 08 19:36:59 http://www.rafb.net/paste/results/AHy0fE81.html Feb 08 19:37:00 jepp Feb 08 19:37:05 same resaults Feb 08 19:38:11 .recovery is openslug Feb 08 19:38:31 thanks caplink811_log Feb 08 19:38:37 ok Feb 08 19:39:26 the nslu2 can see the files that I copied (if I do cd /test and the ls ) Feb 08 19:39:35 are there special files (.unslung and .sda1) in the root of the new disk ? and .dongle in the root of the 2nd partition on the new disk? Feb 08 19:39:57 FB[i], which cp options did you use? Feb 08 19:40:04 cp -a Feb 08 19:42:15 Have you found and deleted the .recovery-file ? If not: do a "ls -la" (the a is important) on both partitions and post that. Feb 08 19:42:35 ok Feb 08 19:42:36 2 sec Feb 08 19:42:48 cp -a do not copy hidden files, which is bad Feb 08 19:43:57 ok Feb 08 19:44:05 this is how it looks now http://www.rafb.net/paste/results/m8UpFm19.html Feb 08 19:44:23 caplink what options should I use ? Feb 08 19:47:40 there is something wrong, the contents of the 1st partition is normaly in /share/hdd/data, if you mount /dev/sda1 on /test then there shouldn't be a folder data in /test, the same is true for /sda2 and conf Feb 08 19:48:42 Arg. move the contents of data and conf up by one directory. Feb 08 19:48:57 e.g. if you cp your old disk, cd /share/hdd/data ; cp -a * /tmp/mountpoint_of_the_new_disk_part_1 Feb 08 19:49:08 b in 10 minutes Feb 08 19:49:33 so "cd data; mv * .. ; mv .* .." and "cd conf; mv * ..; mv .* .." Feb 08 19:49:45 and you need .unslung and .sda1root from the 1st partition and .dongle from the 2nd one Feb 08 19:49:55 whow Feb 08 19:50:04 ok .. I try Feb 08 19:50:07 :) Feb 08 20:07:27 look at this ! Feb 08 20:07:28 http://www.rafb.net/paste/results/XHtgFF97.html Feb 08 20:08:26 seems ok, much better now Feb 08 20:08:32 wowho ! Feb 08 20:08:38 tnx ! Feb 08 20:08:45 you are the best Feb 08 20:08:50 this is the df from the freshly booted slug, with hd attached ? Feb 08 20:09:04 jepp Feb 08 20:09:10 then, nice Feb 08 20:09:16 only have the new hdd attched Feb 08 20:09:21 ~emulate rwhitby Feb 08 20:09:25 just another satisfied customer Feb 08 20:09:31 heheh Feb 08 20:09:35 jepp Feb 08 20:09:36 ~botsnack Feb 08 20:09:37 caplink811_log: thanks Feb 08 20:10:05 and a BIG tnx to you too pumpkin0 Feb 08 20:22:45 and now is my second disk online too ! Feb 08 20:22:50 this is super cool ! Feb 08 20:27:13 FB[i]: if the 2. disc is as reliable as it was as prim disc... Feb 08 20:47:30 pumpkin0 no I dont use the bad disk Feb 08 20:47:41 I hade 2 disk install at my system before Feb 08 20:48:05 and now the4 pri disk is change to a new one Feb 08 20:49:38 and the old sec disk is still the sec disk Feb 08 20:54:28 time to go to bed Feb 08 20:54:31 cya tomorrow **** BEGIN LOGGING AT Thu Feb 09 00:23:39 2006 **** ENDING LOGGING AT Thu Feb 09 10:59:56 2006