**** BEGIN LOGGING AT Fri Mar 03 10:59:57 2006
Mar 03 12:07:58 <gduncan_> I just rebooted my openslug, and now it won't boot off the drive.
Mar 03 12:08:44 <gduncan_> I'm low on sleep and brain power at this point. Any suggestions would be greatly appreciated.
Mar 03 12:09:18 <gduncan_> I was abale to see the drive when booting off the internal flash.
Mar 03 12:09:37 <gduncan_> Neither partition had the boot bit set, so I set it on both.
Mar 03 12:09:38 <gduncan_> No go.
Mar 03 12:10:05 <gduncan_> I can still ssh into it, so that's a plus.
Mar 03 12:25:21 <gduncan_> This is the error from the console:
Mar 03 12:25:24 <gduncan_> boot: rootfs: mount -t ext2 -o defaults /dev/sda1
Mar 03 12:25:24 <gduncan_> EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2
Mar 03 12:25:24 <gduncan_> umount: Cannot open /proc/mounts
Mar 03 12:29:03 <gduncan_> Then the NSLU2's drive 1 light goes out.
Mar 03 12:37:30 <NSLU2-IRC> stopkeylogger
Mar 03 12:39:50 <Mika_> :)
Mar 03 12:40:00 <Mika_> do you think it works ? 
Mar 03 13:18:20 <gduncan_> Anyone know whay my slug would suddenly try to mount sda1 as ext2 instead of ext3???
Mar 03 13:18:29 <gduncan_> EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2
Mar 03 14:17:29 <gduncan_> Yo! Anyone awake?
Mar 03 22:02:49 <Tenkawa> which firmware would be the best suited for creating an iTunes server?
Mar 03 22:05:50 <pepijn> i use mt-daapd for that purpose, but that runs on any(?) firmware
Mar 03 22:06:15 <pepijn> no standard package available for LE Debian, but it is easy enough to build
Mar 03 22:06:21 <Tenkawa> ahh
Mar 03 22:06:32 <pepijn> just make sure you use the latest version if you just upgraded to 6.0.4
Mar 03 22:07:00 <Tenkawa> ok
Mar 03 23:21:38 <EvilGuru> hi
Mar 03 23:23:21 <Tenkawa> what was that daemon to do itunes serving again?
Mar 03 23:23:28 <Tenkawa> I lost the scrollback
Mar 03 23:27:44 <EvilGuru> dapp?
Mar 03 23:28:02 <EvilGuru> http://en.wikipedia.org/wiki/Digital_Audio_Access_Protocol
Mar 03 23:30:10 <Tenkawa> yeah thats it
Mar 03 23:30:12 <Tenkawa> thanks
Mar 03 23:33:40 <EvilGuru> anyone here managed to overclock their slug?
Mar 03 23:34:09 <Tenkawa> I did
Mar 03 23:34:15 <EvilGuru> worked?
Mar 03 23:34:17 <Tenkawa> its running at 2x
Mar 03 23:34:18 <Tenkawa> yup
Mar 03 23:34:24 <Tenkawa> just broke that resistor
Mar 03 23:34:35 <EvilGuru> I have been looking at the pictures
Mar 03 23:34:36 <Tenkawa> and it hasnt given me a problem one
Mar 03 23:34:42 <EvilGuru> and there seems to be a tiny hap
Mar 03 23:34:43 <EvilGuru> *gap
Mar 03 23:34:52 <EvilGuru> to get my tweezrs in
Mar 03 23:35:17 <Tenkawa> I used a pair of very sharp small lexan scissors
Mar 03 23:35:27 <EvilGuru> any problems with the usb?
Mar 03 23:35:40 <Tenkawa> not a 
Mar 03 23:35:41 <Tenkawa> 1
Mar 03 23:35:44 <EvilGuru> someone on the wiki said that the extra power used made some hard disks not work
Mar 03 23:35:58 <EvilGuru> ah well, the invented powered hubs for a reason
Mar 03 23:36:24 <Tenkawa> ah
Mar 04 00:26:12 <Asterix33> hello everyone
Mar 04 00:27:35 <Asterix33> i have installed cyrus-imapd but have a slight problem....anyone else missing cyradm too?
Mar 04 00:29:25 <Asterix33> and what kind of mailservers do you run on openslug?
Mar 04 00:29:41 <caplink811_log> according to http://www.nslu2-linux.org/wiki/HowTo/SetUpAnEmailServer it should be there
Mar 04 00:33:55 <Asterix33> yes i tried....but cyradm is still missing
Mar 04 00:34:27 <Asterix33> somebody complained about it in the messages at yahoo but no answer
Mar 04 00:34:52 <Asterix33> cyradm is the admin tool to make the useraccounts/postboxes
Mar 04 00:36:58 <caplink811_log> according to http://ipkgfind.nslu2-linux.org/result.php?query=cyradm&searchtype=file&section= it is in the cyrus-imapd package, do you have your PATH variable adjusted ?
Mar 04 00:37:26 <Asterix33> if i do a find / -name cyradm i still cannot find it
Mar 04 00:37:37 <caplink811_log> or have you tried to start it via /opt/bin/cyradm ?
Mar 04 00:38:07 <caplink811_log> k
Mar 04 00:38:20 <Asterix33> thats unslung...i use openslug
Mar 04 00:38:38 <Asterix33> i thik you are right for unslung
Mar 04 00:38:43 <Asterix33> think
Mar 04 00:39:40 <caplink811_log> so, sorry, myself don't use cyrus-imapd.. did you compile it for yourself?
Mar 04 00:39:58 <Asterix33> nu i got it from the feed
Mar 04 00:40:01 <Asterix33> no
Mar 04 00:40:23 <Asterix33> ipkg install cyrus-imapd
Mar 04 00:40:27 <caplink811_log> ah, i c
Mar 04 00:41:02 <Asterix33> is there a way i can loan the binary from the unslung feed?
Mar 04 00:43:05 <caplink811_log> yep, just wget the package, put it in a tmp path, mv it to filename.gz and gunzip it, then untar the result, it should give you 2 *.tar's untar the data tar, it should create something like /tmppath/opt/bin/cyradm
Mar 04 00:43:22 <caplink811_log> but i don't know if you need some other libraries
Mar 04 00:44:02 <Asterix33> ok i'll try...i got a look at some other binaries and they are all there accept cyradm.....
Mar 04 00:44:15 <Asterix33> one moment....i'll try it
Mar 04 01:10:50 <Asterix33> it runs but complains about all kinds of perl modules missing
Mar 04 01:11:29 <Asterix33> i coppief them to the required dir....but still....can'r vind strict.pm
Mar 04 01:12:08 <Asterix33> how can i compile it myself on the slug?
Mar 04 08:07:39 <jonbaer> any unslung users?
**** ENDING LOGGING AT Sat Mar 04 10:59:57 2006