**** BEGIN LOGGING AT Sun Jun 18 02:59:58 2006 Jun 18 04:15:21 i've been flashing my slug with di-nslu2.bin, NSLU2_V23R29.bin, and debianslug-3.10-beta.bin, each time i flash, it clears the previous os right? Jun 18 07:04:32 Uhhh kinda Jun 18 07:04:44 It saves some settings to somewhere else Jun 18 07:04:59 You gotta follow ResetSysConf in order to clear that data Jun 18 07:05:23 I myself had problems flashing my slug with other OSes, untill I reset the sysconf Jun 18 07:56:32 hi Jun 18 07:57:16 hi all Jun 18 07:57:20 Im having a problem with my nslu2 Jun 18 07:57:30 Whoa. Jun 18 07:57:36 I love this webserver on the NSLU2 Jun 18 07:57:49 Had expected it to be very slow..... but it's kinda fast :) Jun 18 07:58:13 I tried reflashign the image using sercomm Jun 18 07:58:15 adn upslug2 Jun 18 07:58:20 it doesnt flash correctly Jun 18 07:58:30 What's going wrong? Jun 18 07:58:33 i tried using tftp Jun 18 07:58:38 well it doesnt boot Jun 18 07:58:45 when i doa reset from the redboot command Jun 18 07:58:50 it gives me just a yellow lite Jun 18 07:59:00 ive tried every image each image does differently Jun 18 07:59:04 linksys gives me a yellow light Jun 18 07:59:07 So... You flashed what image? Jun 18 07:59:17 Debian Image Gives me Jun 18 07:59:26 red green after bootiung Jun 18 07:59:30 Did you follow the howto? Jun 18 07:59:33 yes. Jun 18 07:59:38 Which one? Jun 18 07:59:42 hrm hold Jun 18 07:59:51 the tftp one the image one let me show u Jun 18 08:00:14 ot was working b4 Jun 18 08:00:29 I think you need to follow ResetSysConf Jun 18 08:00:36 sigh tried that too :( Jun 18 08:00:42 I had this problem too, and I solved it (I think) by doing that Jun 18 08:00:44 it was working previously before.. Jun 18 08:00:54 how longm does reset should tkae? Jun 18 08:01:15 First ResetSysConf, then flashing the original Linksys firmware and do a factory reset (in the web interface), then doing ResetSysConf again and them uploading the Debian image Jun 18 08:01:30 ok ill try that Jun 18 08:01:33 wait Jun 18 08:01:35 its back up Jun 18 08:01:36 oh my gosh :) Jun 18 08:01:43 It's working? Jun 18 08:01:49 the reset commadn didnt work Jun 18 08:01:51 well i got all green right now Jun 18 08:01:52 It could take a while before it's booted.. Jun 18 08:01:57 oh really? Jun 18 08:02:05 how long could it take for a reset commmand? Jun 18 08:02:13 Well, not 2 hours, but like.. max. 5 minutes Jun 18 08:02:25 ok thank u Jun 18 08:02:57 gime a sec lets see if its up Jun 18 08:03:16 if its not ill follow yer instructiosn ) Jun 18 08:03:27 Can you ping to 192.168.1.77 ? Jun 18 08:03:48 Or... the Ip address you have given your slug Jun 18 08:04:00 hrm its not working i think its cuz i reset it before it fuly rebooted Jun 18 08:04:04 but let me do yer instructions Jun 18 08:04:17 oookay Jun 18 08:04:27 I had lots of troubles with that myself too... Jun 18 08:04:40 The NSLU2 not giving a beep when it's booting Jun 18 08:04:46 Solved it by doing that ResetSysConf 2x Jun 18 08:04:55 hrm Jun 18 08:05:10 i got on the web interface Jun 18 08:05:17 but the linksys setup software isnt finding it Jun 18 08:05:25 :O Jun 18 08:05:29 Linksys setup software? Jun 18 08:05:38 the cd it comes with Jun 18 08:05:43 Just go to http://192.168.1.77/ (or the IP address you have given your slug) Jun 18 08:06:08 ya Jun 18 08:06:14 the cd that nslu comes with Jun 18 08:06:19 for some reason it doesnt detect it Jun 18 08:06:31 it is fully booted? Jun 18 08:06:35 yup Jun 18 08:06:37 but i turned it off Jun 18 08:06:38 Meaning, ready/status is green ? Jun 18 08:06:45 Well, that's why it can't find it :P Jun 18 08:06:46 when i did reset Jun 18 08:06:49 lol Jun 18 08:06:49 nbo Jun 18 08:06:52 when i did the tftp Jun 18 08:06:52 hehe Jun 18 08:06:54 i did a reset Jun 18 08:07:00 but i turned it off after about 3-4 mins Jun 18 08:07:09 maybe it wasn't fully configured? Jun 18 08:07:25 ahh crap Jun 18 08:07:27 its not my web interface Jun 18 08:07:30 this is my router :) Jun 18 08:07:34 hahhhaha Jun 18 08:07:38 damnit :[ Jun 18 08:07:38 heh Jun 18 08:07:46 ok i'll do your resetconf install image Jun 18 08:07:49 reset conf again Jun 18 08:08:09 and wait 5 mins for each Jun 18 08:08:12 ookay Jun 18 08:08:13 success Jun 18 08:18:12 hrm this is wierd Jun 18 08:18:16 EVery single lite is on Jun 18 08:18:17 right now Jun 18 08:18:22 mebbe cuz its sitll in the middle of rebooting? Jun 18 08:25:23 ok Jun 18 08:25:23 < DaveG> oh really? Jun 18 10:10:00 what FTP server would you lot recomend? Jun 18 13:51:49 hi Jun 18 13:51:51 anyone around Jun 18 13:51:58 my nslu2 is dead i tried all the REimaging methods Jun 18 13:52:07 i even did tftpd and the check sum worked i did the reset conf Jun 18 13:52:14 and all i get is the yellow lite Jun 18 13:52:20 the redboot works without a problem Jun 18 13:52:24 any idea where to go from here? Jun 18 13:54:20 ekr now i get a flashing green lite Jun 18 14:02:20 can you ping it? Jun 18 14:02:30 can you in any way communicate with it? Jun 18 14:02:52 no Jun 18 14:02:57 i cant do anything but use redboot Jun 18 14:03:08 whenuit firsdt boots up as 192.168.0.1 Jun 18 14:03:11 guess a re-flash in in order Jun 18 14:03:17 yes i tried reflashing Jun 18 14:03:21 with the tftpd Jun 18 14:03:23 too Jun 18 14:03:26 did it work? Jun 18 14:03:27 chksum was perfect Jun 18 14:03:28 no Jun 18 14:03:42 and im using hte LINksys firmware Jun 18 14:03:47 63 version Jun 18 14:04:00 should i try 5.5 unslung? Jun 18 14:04:04 or would that not make a difference? Jun 18 14:04:27 the reset command does nothing on my device too :( Jun 18 14:04:32 it just stops at the yellopw lite Jun 18 14:05:31 any suggestions? Jun 18 14:06:28 mebbe theres something wrong with the hardware? Jun 18 14:06:39 now when i boot EVERY lite is on Jun 18 14:06:47 witht the ready lite flashing Jun 18 14:07:38 is it flashing red green ? Jun 18 14:07:43 no Jun 18 14:07:48 Heres the scenario Jun 18 14:07:52 I turn it off for 10 seconds Jun 18 14:07:54 turn it back on Jun 18 14:08:05 it either goes Yellow and stays yello Jun 18 14:08:09 or Jun 18 14:08:12 it goes flashing green Jun 18 14:08:17 and stays flashing green Jun 18 14:08:20 and heres a new one Jun 18 14:08:24 ALlt he lites are on Jun 18 14:08:30 with the ready flashing green Jun 18 14:08:36 hmm Jun 18 14:09:02 im im sure the image was ok cuz i did a chksum on the NLSU image Jun 18 14:09:12 i did a reset conf and it mentioned problems with 63 build Jun 18 14:09:21 do u think thats the problem? Jun 18 14:09:31 did you try going into upgrade mode pressing the reset button and releasing it shortly after power on when it goes red first time Jun 18 14:09:42 yes Jun 18 14:09:43 i did that Jun 18 14:09:48 Numerous times never works Jun 18 14:09:51 erk Jun 18 14:09:54 It goes into upgrade mode Jun 18 14:09:58 redboot work Jun 18 14:09:58 and than used the sercomm tool to flash ? Jun 18 14:10:02 yup Jun 18 14:10:08 still doesnt boot Jun 18 14:10:14 hm that never failed for me :-/ Jun 18 14:10:25 where can i get the NLUS R25 vuild? Jun 18 14:10:37 23R25 build? im wondering if thats the problem? or do you no thitnk it is? Jun 18 14:10:44 i think that is unslung 5.5 Jun 18 14:10:47 Cuz i tried doing the reset conf.. Jun 18 14:11:10 ok well let me know if you think of any ideas :) Jun 18 14:11:20 what happens if you press reset now Jun 18 14:11:49 like putting it in upgrade mode? Jun 18 14:12:14 or just pressing reset while its on? Jun 18 14:12:19 no when the slug is on Jun 18 14:12:22 press reset Jun 18 14:12:46 doesnt look lik enothing happens Jun 18 14:12:56 :-( Jun 18 14:13:22 lol sux to be me Jun 18 14:13:23 :) Jun 18 14:16:58 nay ideas? what else i can try Jun 18 14:17:03 ask around while im away :) Jun 18 14:23:21 >>>hrm Jun 18 14:23:25 unslung 5.5 dont work either :( Jun 18 14:23:30 how long does it usullyt ake to reset? Jun 18 14:23:42 after aa resetconf? Jun 18 14:27:59 what do you mean by resetcong ? Jun 18 14:28:01 -g+f Jun 18 14:28:22 umm Jun 18 14:28:22 reflashing takes about 5 minutes i think Jun 18 14:28:26 ya Jun 18 14:28:35 it took a bit a time to do the write Jun 18 14:28:43 so i did a reset Jun 18 14:28:52 and all i get is a yellow lite on the ready Jun 18 14:28:55 oh\ Jun 18 14:29:20 maybe the flash was not complete ? Jun 18 14:29:30 no Jun 18 14:29:31 after the write there is a verify Jun 18 14:29:34 oh Jun 18 14:29:38 Ya that all works too Jun 18 14:29:40 but im using tftp now Jun 18 14:29:52 the sercomm and upslug isnt working Jun 18 14:29:57 it says its all done Jun 18 14:29:59 but doesnt work :) Jun 18 14:30:40 http://www.nslu2-linux.org/wiki/HowTo/ResetSysConf Jun 18 14:30:42 this is wha ti tried doing Jun 18 14:31:02 after every thing died Jun 18 14:31:05 i thought it might fix it :( Jun 18 14:31:33 i followed all the notes Jun 18 14:33:23 is your network 192.168.1.x ? Jun 18 14:33:34 yes Jun 18 14:33:46 im wondering if theres an ipconflict Jun 18 14:33:57 mebbe my dhcp server is giving it a ip address thats ALREADY taken Jun 18 14:33:58 :S Jun 18 14:34:01 i dont think so but Jun 18 14:34:23 you could try booting it with out lan cable connected Jun 18 14:34:45 would it boot without net? Jun 18 14:34:50 sure Jun 18 14:35:12 damnit Jun 18 14:35:16 so close Jun 18 14:35:20 its IP should be now 192.168.1.77 Jun 18 14:35:21 it went solid for a spliut second Jun 18 14:35:38 and went flashing green.. with the ethenret cord Jun 18 14:35:39 anyway Jun 18 14:38:15 whats the usually boot leds for linksys firmware? Jun 18 14:40:40 orange redady Jun 18 14:40:45 hrm Jun 18 14:40:46 blinking green ethernet Jun 18 14:40:49 i just get a flashing green Jun 18 14:40:50 :( Jun 18 14:40:55 without ethernet too Jun 18 14:41:04 disk blinking green Jun 18 14:41:10 ready blinking green Jun 18 14:41:10 no Jun 18 14:41:14 ready blinking green Jun 18 14:41:45 until its loaded Jun 18 14:42:06 hrrm Jun 18 14:42:10 i think it sits here for a while Jun 18 14:42:13 how long u think i should wait? Jun 18 14:42:30 2 minutes max Jun 18 14:42:36 hrm Jun 18 14:42:42 i hardly doubt i killed my redboot Jun 18 14:42:46 i never even flashed redboot Jun 18 14:42:58 im just thinking of options on what might be happening Jun 18 14:43:24 as soon as the ethernet is ready the orange ready led startet blinking green until everything was loaded Jun 18 14:44:17 maybe i'll try sercomm again Jun 18 14:44:18 :) Jun 18 14:46:48 eiffel: whats wierd is sometimes all the lights go on Jun 18 14:46:53 with the ready light flashing Jun 18 14:49:40 without a hdd attached ? Jun 18 14:49:45 yup Jun 18 14:49:50 nothings attached Jun 18 14:50:02 seems wierd yeah Jun 18 14:50:05 u thinki voided my warranty Jun 18 14:50:08 by reflashign? Jun 18 14:51:26 im cofnused Jun 18 14:51:32 im guessing if i do a complete image Jun 18 14:51:34 it will kill redboot? Jun 18 14:51:43 i havent tried that Jun 18 14:51:49 but im thinking its not really necessary Jun 18 14:53:05 ok Jun 18 14:53:10 ok? Jun 18 14:53:16 what do u mean ok :) Jun 18 14:53:17 i tried it without anyything attacked Jun 18 14:53:19 no lan no hdd Jun 18 14:53:33 first the status led is orange Jun 18 14:53:41 oh ok... Jun 18 14:53:45 every lights go off Jun 18 14:53:54 disk 1 and 2 flashes one time Jun 18 14:54:11 und after that its blank for some seconds Jun 18 14:54:20 no lights? Jun 18 14:54:28 yes Jun 18 14:54:32 hmm Jun 18 14:54:45 well that defintelydoes not happen on mine Jun 18 14:54:53 and than about 2 minutes green flasing ready led until it beeps Jun 18 14:55:24 i currently have the unslung 6.8 installed Jun 18 14:55:34 ill do that next Jun 18 14:55:36 im using 5.5 right now Jun 18 14:55:44 Have you ever doen the resetconf? Jun 18 14:55:52 no Jun 18 14:56:21 Eiffel: linksys voides the warranty when u reflashright? Jun 18 14:56:25 u think they can tell :) Jun 18 14:56:31 if i put hte original linksys firmware on there Jun 18 14:56:42 they do ? Jun 18 14:56:51 i dunno Jun 18 14:57:01 i havent done anything to take it a part Jun 18 14:57:04 :S Jun 18 14:57:05 thats funny they provide upgrades so there is a need to reflash Jun 18 14:57:13 hmm Jun 18 14:57:20 maybe i'll say this Jun 18 14:57:27 "I wa supgrading my linksys anmd now it doesnt work" Jun 18 14:57:32 (not mention about openslug) lol Jun 18 14:58:06 ya this is definetely wierd.. i think its gotta be a hardware problem Jun 18 14:59:01 woah now all LITES are on Jun 18 14:59:04 without blinking Jun 18 15:03:13 ok Jun 18 15:03:17 thats my plan Jun 18 15:03:28 reflash with linksys firmware and call them for tecch support :) Jun 18 15:03:35 tell them yer product sucks :) Jun 18 15:03:37 or somethintg Jun 18 15:04:17 well i wont say there product sucks Jun 18 15:04:23 ill say i htink i got a defect :) Jun 18 15:06:10 its wierd though ud think if there's something wrong wiht the hardware redboot wouldnt work Jun 18 15:09:15 my guess is you messed somehing up while flashing but as long redboot works that should be no problem Jun 18 15:09:41 yes thats my wondering too Jun 18 15:09:45 :S Jun 18 15:11:56 is there some time of diagnostic tool fori t :) Jun 18 16:47:00 mika_ :) Jun 18 18:28:55 hi, i have a problem,is there someone that can help me? Jun 18 18:29:06 not until you describe the problem :) Jun 18 18:29:14 infact..:-) Jun 18 18:29:59 so i have install on nslu openSlug but now i can't admin trough web interface alone ssh Jun 18 18:30:59 Lord: you mean only via ssh? I believe openSlug doesn't offer any web admin interface Jun 18 18:31:57 in this way i don't upgrade firmware etc...so what's upgrade firmware? Jun 18 18:32:17 SSh Secure shell,it's alone way for admin nslu Jun 18 18:32:40 before i could admin it trough web iterface Jun 18 18:34:04 be more specific, before what Jun 18 18:34:23 before install openSlug Jun 18 18:34:35 and I said it doesn't offer any web admin pages Jun 18 18:34:49 for example unslung does Jun 18 18:36:03 so in this way how upgrade firmware? Jun 18 18:36:27 because before install OpenSlug i used to be web interface Jun 18 18:36:47 because before install OpenSlug i used to web interface Jun 18 18:36:56 the original LinkSys firmware or Unslung? Jun 18 18:37:16 when i have original Linksys firmware Jun 18 18:37:47 ok, and now you have OpenSlug - so you'll have to learn to live without the web interface - atleast the same linksys offered Jun 18 18:38:58 if you insist on having the web interface - install Unslung Jun 18 18:39:03 Lord_Psyco, if you want to flash a new/other firmware, you'll have to use the SerComm Upgrade utility (see the www.nslu2-linux.org Wiki for more info) Jun 18 18:40:20 but if i don't know when upgrade system because when i try to install a package with ipkg,system said:"Not enought memory" Jun 18 18:41:28 it looks like you're still running from internal flash memory instead of an usb device Jun 18 18:42:26 are you sure you read the README and followed all the steps? Jun 18 18:42:45 ok,but i can install the package in my usb hard-drive?if yes how?not at all Jun 18 18:43:42 please take a look at the README. that's what it's for Jun 18 18:51:31 hi, i have a problem installing openSSH Jun 18 18:51:45 when i run ps -ef Jun 18 18:52:01 it doesnt show up any process of it Jun 18 18:52:13 anyone can help plz? Jun 18 18:52:28 i did ipkg install openssh Jun 18 20:52:00 http://www.nslu2-linux.org/wiki/DebianSlug/Bootstrap Jun 18 20:52:06 turnup disk /dev/sda1 -t ext3 Jun 18 20:52:11 Could I safely type "turnup memstick /dev/sda1 -t ext3"? Jun 18 20:52:17 As I'm installing on a USB stick. Jun 19 02:01:46 hi Jun 19 02:01:47 anyone here Jun 19 02:01:58 I was wondering if anyone could give me some advice Jun 19 02:02:15 ive tried reflashing using UPSLUG2 / TFTPD / SERCOMM Jun 19 02:02:20 even tried resetconf Jun 19 02:02:26 nothing is getting this darn device back up Jun 19 02:02:29 any suggestions? **** ENDING LOGGING AT Mon Jun 19 02:59:56 2006