**** BEGIN LOGGING AT Tue Jun 27 02:59:57 2006 Jun 27 05:22:41 anyone have any advice on getting r83 off to double the clock speed? can i use a nail clippers to just break it, and take it off? Jun 27 05:23:57 yes Jun 27 05:24:10 it work. just scratch off the black stuff on the resistor and BAM!!! Jun 27 05:29:57 deadcat: so i don't have to worry too much? just get the surface mount r83 smached, and it'll work? Jun 27 05:30:09 s/smached/smashed Jun 27 05:39:35 ya Jun 27 05:39:45 its fool proof actually. Jun 27 14:37:35 hello Jun 27 14:59:35 man, this thing compiles SLOOOOOW Jun 27 14:59:49 hrmpf... fucking smaba Jun 27 14:59:57 i got openslug 3.10 beta loaded on it though, no problems at all... Jun 27 15:00:01 so i am happy about that. Jun 27 15:00:20 heh Jun 27 15:00:25 now I am trying to get this beast to run gentoo... so i have more steps to continue Jun 27 15:00:40 good luck Jun 27 15:00:46 thanks man Jun 27 15:00:55 what is your slug setup? Jun 27 15:01:16 atm openslug 3.1 and i'm trying to get samba running... no luck Jun 27 15:02:06 you using ipkg i assume? Jun 27 15:02:11 yup Jun 27 15:02:30 how do i properly add a user? i'm missing the useradd util :/ Jun 27 15:02:57 i don't know anything about ipkg, as i installed opensug 3.10 beta so as to be able to bootstrap gentoo after that... Jun 27 15:03:05 hmmm Jun 27 15:03:13 just sec lemme log in and take a look Jun 27 15:03:16 no promises Jun 27 15:03:20 :) Jun 27 15:03:24 but we all gotta help each other Jun 27 15:03:59 i figure, if we all help each other, we will learn faster, and waste less time reinventing the wheel Jun 27 15:04:02 just one sec Jun 27 15:05:01 i am gonna go out on a limb and *guess* you have to install an ipkg that has useradd util in it Jun 27 15:05:38 hrm Jun 27 15:05:39 becuase it's not on my freshly flashed as of 6 hrs ago openslug 3.10 beta Jun 27 15:05:48 hehe Jun 27 15:06:01 there has to be another way... just haven't found it till now ^^ Jun 27 15:06:25 wait, you found it? Jun 27 15:06:51 or are you saying you think my idea will work? Jun 27 15:07:48 your idea isn't bad... Jun 27 15:07:53 http://www.linuxheadquarters.com/howto/basic/adduser.shtml Jun 27 15:08:01 found that article... seems good Jun 27 15:10:14 hld: that article assumes you have adduser (the utility) installed on your system Jun 27 15:10:21 and you don't Jun 27 15:10:37 i got adduser but not useradd... that's the util i used till now... Jun 27 15:10:52 wait Jun 27 15:10:56 you have adduser installed? Jun 27 15:11:46 yup Jun 27 15:13:19 ok good Jun 27 15:13:23 i think i can help ya Jun 27 15:13:43 if nothing else, you can learn adduser.... Jun 27 15:14:04 hehe ^^ Jun 27 15:14:22 i need a user "andi" so i guess "adduser andi" will do the trick Jun 27 15:15:27 hld did you know, that adduser --help, offers you a page with the available options? Jun 27 15:16:06 erm, nope Jun 27 15:16:26 and it doesn't for me ... Jun 27 15:16:28 brb 2 mins Jun 27 15:17:50 hm, openslug uses busybox1.0, i assume... and adduser maybe a link to busybox, so it is on my system (which isn't openslug) Jun 27 15:18:33 können wir das mal drüben auf deutsch weiterführn? Jun 27 15:18:49 jep Jun 27 15:22:04 hld: you there still? Jun 27 16:09:16 back in 20 Jun 27 16:11:09 hi, can someone help me out as to how i would use packages for the unslung firmware? Jun 27 16:12:19 burly: by using you mean installing? Jun 27 16:13:25 ive installed 2 packages so far (openssh and rtorrent) but im a complete noob and have no idea where to go from here, how do i operate these? Jun 27 16:14:39 have you connected to your slug via ssh? (in others words already using openssh) Jun 27 16:15:31 yes, i just logged in via putty Jun 27 16:17:35 and what would you like to do next? Jun 27 16:18:25 use rtorrent or any other package but im unsure of how to man? them Jun 27 16:18:54 i found this page (http://libtorrent.rakshasa.no/wiki/RTorrentMan) but how do i use these commands? Jun 27 16:19:25 ive never used anything like this until a day ago so im pretty stupid Jun 27 16:20:59 Linux slug 2.6.16 #1 PREEMPT Fri Jun 9 07:34:31 PDT 2006 armv5teb unknown Jun 27 16:21:01 sweet Jun 27 16:27:18 Where do I find the find util to replace the one from BusyBox Jun 27 16:28:05 ipkg upgrade Jun 27 16:28:39 or do you mean something else? Jun 27 16:30:35 the find that comes with Busybox does not have the -exec option - trying to get dyndns update script working Jun 27 16:41:46 Was the clock already fixed, on the slug? Jun 27 16:54:51 npt: back Jun 27 17:07:35 MartySkitch, as a 1st step, you should use http://ipkgfind.nslu2-linux.org/ and if that wont work, then you could do something like ipkg update;ipkg list|grep find Jun 27 17:09:25 root@NSLU2:/# smbpasswd -a andi Jun 27 17:09:25 New SMB password: Jun 27 17:09:25 Retype new SMB password: Jun 27 17:09:25 NULL guest account!?!? Jun 27 17:09:25 Failed to initialise SAM_ACCOUNT for user andi. Does this user exist in the UNIX password database ? Jun 27 17:09:25 Failed to modify password entry for user andi Jun 27 17:09:29 hrm? how to fix? Jun 27 17:12:16 caplink811_log: OK thats what I want (i think) but it conflicts with busybox. Can I just kill the link for find and then install? Jun 27 17:12:41 that's the way.. Jun 27 17:13:50 Thanks I'll let you know how it works Jun 27 17:18:27 I kill the link but install fails because of conflict with busybox-links Jun 27 17:25:54 MartySkitch, try ipkg -force-overwrite install... Jun 27 17:31:13 Even with -force-overwrite I still get conflict - I tried method on wiki page about installing wget after busybox and no luck Jun 27 17:36:39 caplink811_log - -force-depends worked but had to rm link to xargs too Jun 27 17:36:54 Now back to dyndns update script Jun 27 18:27:51 whats the best ipkg torrent package? Jun 27 18:33:08 enhanced-ctorrent Jun 27 18:38:05 when will it be up? Jun 27 18:46:05 ?? Jun 27 18:46:06 ipkg info enhanced-ctorrent Jun 27 18:46:06 Package: enhanced-ctorrent Jun 27 18:46:06 Version: dnh2-1 Jun 27 18:46:06 Depends: libstdc++, openssl Jun 27 18:46:06 Status: install user installed Jun 27 18:46:08 Architecture: armeb Jun 27 18:46:14 its already there Jun 27 18:48:38 it has been removed Jun 27 18:48:43 http://www.nslu2-linux.org/wiki/Unslung/EnhancedCTorrent Jun 27 18:51:17 hm Jun 27 18:51:17 root@Linksys:~ > ipkg list | grep ctorrent Jun 27 18:51:17 ctorrent - 1.3.4-2 - CTorrent is a BitTorrent client written in the C programming language. Jun 27 18:51:17 enhanced-ctorrent - dnh2-1 - Jun 27 18:51:23 seems to be there Jun 27 19:33:20 is it just named ctorrent? Jun 27 19:33:34 i cant find that enhanced ctorrent? Jun 27 19:34:42 for what? Jun 27 19:34:51 I didn't think it was in any feeds yet Jun 27 19:34:59 but unslung feed first Jun 27 19:35:40 do you know when it will be there? Jun 27 19:35:48 or anyother way of getting it? Jun 27 19:37:53 burly: ipkg install enhanced-ctorrent perhaps? Jun 27 19:38:21 http://www.nslu2-linux.org/wiki/Unslung/EnhancedCTorrent Jun 27 19:38:30 The package was marked as broken, so the ipk file disappeared from the feeds after a full rebuild of the repository. I am working to get it compiled on all supported platforms, meanwhile i have commited a new Makefile putting the package back into testing. Jun 27 19:38:39 that was dated June 21 Jun 27 19:39:12 better update then :P Jun 27 19:39:24 what it in the feed now? Jun 27 19:39:41 yup, no enhanced anymore Jun 27 19:39:59 naib: meant myself Jun 27 19:40:07 oh lol Jun 27 19:40:19 any idea if it is coming to the OpenSlug feeds? Jun 27 19:41:07 hmm what can i use instead for the time being? Jun 27 19:41:23 rtorrent, ctorrent (that still does work ok Jun 27 19:47:33 im really new to this, can you tell me what i do after ive ipkg install rtorrent? Jun 27 19:47:58 ipkg install rtorrent Jun 27 19:48:01 ;) Jun 27 19:48:16 hey Jun 27 19:48:22 err Jun 27 19:48:29 do i need to reboot? Jun 27 19:48:34 how do i add a torrent? Jun 27 19:48:35 nop Jun 27 19:48:47 you should now have a command "rtorrent" to play with Jun 27 19:48:55 I would recomend "screen" as well Jun 27 19:49:27 ipkg install screen? Jun 27 19:49:32 yup Jun 27 19:50:04 how do i command rtorrent? any site? Jun 27 19:50:23 err dunno, I use ctorrent, hang on Jun 27 19:51:00 i could use ctorrent if thats any easier? Jun 27 19:51:28 I myself I use to ctorrent, but rtorrent just as good Jun 27 19:51:30 just i wont be using my nslu2 for anything other than torrents (reason i did this in the first place) and serving files to my network Jun 27 19:51:53 mmm sounds familiar Jun 27 19:54:07 well from what I have read you just need to go "rtorrent TORRENT.torrent" Jun 27 19:54:16 so If you CD to where the torrent is and go Jun 27 19:54:42 screen -dmS torrent rtorrent TORRENT.torrent Jun 27 19:55:07 where TORRENT.torrent is yr torrent, it will start to d/l the torrent-data in a SCREEN process Jun 27 19:56:01 screen keeps it up right? Jun 27 19:56:06 so i can disconnect Jun 27 19:56:08 yup Jun 27 19:56:22 you can use nohup, but SCREEN means you can then go back to it Jun 27 19:56:31 think of screen as like virtual-consoles Jun 27 19:56:42 how do i use CD? Jun 27 19:56:46 im an idiot Jun 27 19:57:20 "cd" lower-case Jun 27 19:57:39 say you are at "/" and the torrent file is in Jun 27 19:57:39 /opt/DATA/torrents Jun 27 19:57:47 then Jun 27 19:57:47 cd /opt/DATA/torrents Jun 27 19:58:19 can it be stored anywhere? Jun 27 19:58:23 why that folder? Jun 27 19:58:57 anywhere, that was just an example, that is where my torrent go Jun 27 19:59:19 i will try now, thanks for your help Jun 27 20:03:12 i have done this, shouldnt there by any confirmation? Jun 27 20:03:43 # cd /torrents Jun 27 20:03:52 # screen -dmS torrent rtorrent clients.torrent Jun 27 20:04:10 do you have TOP Jun 27 20:04:12 type top Jun 27 20:04:22 and you should see rtorrent an screen in the list Jun 27 20:04:30 or type Jun 27 20:04:30 screen -list Jun 27 20:04:35 to see if screen is running Jun 27 20:04:42 No Sockets found in /tmp/screens/S-root. Jun 27 20:04:55 mmm Jun 27 20:04:59 top: No such file or directory Jun 27 20:05:08 sorry I don't know rtorrent Jun 27 20:05:19 can you run "rtorrent TORRENT.torrent" Jun 27 20:05:48 rtorrent: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory Jun 27 20:06:12 ahh thats the prob then, sort out the dependacy's and the SCREEN command will work Jun 27 20:06:22 can you "ipkg install curses" Jun 27 20:06:31 ncurses it is Jun 27 20:07:28 ok installed Jun 27 20:07:34 what shall i try again? Jun 27 20:07:56 Naib, it is your customer ;) Jun 27 20:08:04 kk Jun 27 20:08:13 rtorrent torrent.torrent Jun 27 20:08:32 "ipkg rtorrent" should of pulled in all the deps tho? Jun 27 20:08:43 rtorrent: error while loading shared libraries: libcurl.so.3: cannot open shared object file: No such file or directory Jun 27 20:08:46 same thing Jun 27 20:08:46 as you said, should.. Jun 27 20:08:53 need reboot? Jun 27 20:08:56 nop Jun 27 20:08:57 no Jun 27 20:09:04 MartySkitch, sry Jun 27 20:09:15 oops, Naib i meant Jun 27 20:09:24 lol Jun 27 20:09:50 blury30, looks like a few more dependancy's are needed Jun 27 20:09:57 ipkg install curl Jun 27 20:10:04 psst, libcurl Jun 27 20:10:12 right Jun 27 20:10:15 curl will pull in libcurl Jun 27 20:10:25 wont this waste a lot of memory? Jun 27 20:10:29 ipkg install libcurl3 Jun 27 20:10:41 it will "waste" diskspace Jun 27 20:10:47 or a few hundred k Jun 27 20:10:54 of* Jun 27 20:11:41 ok Jun 27 20:11:50 so just libcurl? Jun 27 20:12:15 assuming, that you use unslung, then yes Jun 27 20:13:01 ok works Jun 27 20:13:09 wot rtorrent? Jun 27 20:13:17 rtorrent clients.torrent Jun 27 20:13:34 right CTRL-C to stop it Jun 27 20:13:42 now do the screen command Jun 27 20:14:20 where do i put ctrl-c in? Jun 27 20:14:48 just press those two keys together Jun 27 20:15:03 nothing happens? Jun 27 20:15:05 it will quit rtorrent (which I assume is running and you do not have a prompt) Jun 27 20:15:10 do you have a prompt Jun 27 20:15:32 yeah but doesnt quit it Jun 27 20:15:36 im running putty? Jun 27 20:15:47 kk, sorry I don't know rtorrent Jun 27 20:15:54 it could b running Jun 27 20:15:59 thus no need for screen Jun 27 20:16:06 ps -ef ? Jun 27 20:16:10 what is the output of Jun 27 20:16:16 ps -a | grep rtorrent Jun 27 20:16:40 "grep: command not found" Jun 27 20:16:45 i will close the session Jun 27 20:17:08 y? Jun 27 20:17:15 couldnt get back to # Jun 27 20:17:41 ahh, so the screen command is needed Jun 27 20:17:53 CTRL-C should of killed rtorrent Jun 27 20:18:26 you could of opened another "Putty" and then killed "rtorrent" Jun 27 20:18:37 # ps -a | grep rtorrent Jun 27 20:18:45 # 24057 ttyp0 root 2668 S grep rtorrent Jun 27 20:19:04 ahh it is running. is this from another putty window? Jun 27 20:19:05 ah Jun 27 20:19:11 ? Jun 27 20:19:12 yes Jun 27 20:19:25 Naib, it isn't... that is the grep Jun 27 20:19:44 SHITE !!! always fall for that trap!!! Jun 27 20:19:52 i'm apologize Jun 27 20:20:23 lol Jun 27 20:20:27 err Jun 27 20:22:17 shall i run "# screen -dmS torrent rtorrent clients.torrent"? Jun 27 20:22:35 and that should initiate a torrent download int he background? Jun 27 20:22:50 it should but it looks like rtorrent isn't working Jun 27 20:23:07 ok what about ctorrent? Jun 27 20:23:12 can i just delete all this? Jun 27 20:23:28 ipkg install ctorrent Jun 27 20:23:42 ipkg remove rtorrent libcurl ncurses Jun 27 20:24:10 ok done Jun 27 20:24:22 how do i add to ctorrent? Jun 27 20:24:29 ipkg install ctorrent Jun 27 20:24:50 a torrent? Jun 27 20:25:02 oh soz Jun 27 20:25:21 try "ctorrent -U 30 -C 5 data.torrent" Jun 27 20:25:26 to make sure ctorrent runs Jun 27 20:25:54 that will limit upload to 30k/s (you might want to change that) Jun 27 20:26:09 and limit cache to 5meg Jun 27 20:27:36 does it run? Jun 27 20:28:05 ctorrent: invalid option -- U Jun 27 20:28:38 ok forget the "-U" option Jun 27 20:28:45 must have a different version to me Jun 27 20:28:56 ctorrent -C 5 data.torrent Jun 27 20:29:01 yeah i get list of options after that Jun 27 20:29:12 -e -p etc Jun 27 20:29:36 yep Jun 27 20:29:38 runs Jun 27 20:29:40 right does any say "Cache size" Jun 27 20:29:47 oh nvm if it runs Jun 27 20:29:51 so it runs? Jun 27 20:29:56 CTRL-C to break out Jun 27 20:29:56 yes Jun 27 20:30:12 ok Jun 27 20:30:12 now do Jun 27 20:30:14 done Jun 27 20:30:27 screen -dmS torrent ctorrent -C 5 data.torrent Jun 27 20:30:36 and it should run in the background Jun 27 20:30:42 screen -list should confirm Jun 27 20:30:46 as well as "ps -a" Jun 27 20:31:32 yes it is running Jun 27 20:31:43 cool, and you are at a command prompt? Jun 27 20:31:44 24083 root 1896 S SCREEN -dmS torrent ctorrent -C 5 clients.t Jun 27 20:31:50 anyone running gentoo on their slug? Jun 27 20:31:58 24084 ttyp1 root 5864 S ctorrent -C 5 clients.torrent Jun 27 20:32:15 yes Jun 27 20:32:24 goodgood, all working u should c the data file increasing in size now Jun 27 20:33:13 where i see that? Jun 27 20:33:27 in the same directory as the torrent Jun 27 20:33:33 if you type "ls -l" Jun 27 20:33:48 and then "ls -l" a bit later there should b a difference in size Jun 27 20:33:52 on the data file Jun 27 20:34:45 -B rate Max bandwidth (unit KB/s) Jun 27 20:34:50 does that limit upload? Jun 27 20:34:52 or download? Jun 27 20:35:12 I dunno, soz I got a different version of Ctorrent Jun 27 20:35:20 anything else abt bandwidth Jun 27 20:35:37 nope Jun 27 20:37:52 hang on ill just "emerge ctorrent" and check the syntax Jun 27 20:39:20 ls -l just shows the actual file size so i cant tell if its downloading from there Jun 27 20:39:41 anyway of getting a %? Jun 27 20:39:56 well, maybe a good thing, to do a little research on the homepage of the ctorrent project.. Jun 27 20:40:20 BUT if you issue the command again and there is a difference from the last time then it is d/l Jun 27 20:40:35 only way to get % is to join the SCREEN session and look at the output Jun 27 20:40:41 it shows it in % Jun 27 20:42:44 how would i do that? Jun 27 20:43:13 screen -r Jun 27 20:43:28 THEN when you want to leave Jun 27 20:43:35 press CTRL-a Jun 27 20:43:41 then "d" Jun 27 20:46:41 sorted? Jun 27 20:49:55 hello? Jun 27 20:50:16 hearing with 5 ;) Jun 27 20:50:30 5;) ?? Jun 27 20:50:48 5 of 5 (level) ;) Jun 27 20:50:58 sorry dont understand? Jun 27 20:51:44 Well assuming IRC help requests are like Linux commands, no reply means everything is ok Jun 27 20:51:55 so Burly30 must be happy Jun 27 20:51:58 I need food Jun 27 20:52:16 it seems so.., or just routing problems.. Jun 27 20:52:48 ~praise Naib Jun 27 20:53:02 err Jun 27 20:53:15 hm, where is the bot? Jun 27 20:53:18 ~test Jun 27 20:53:18 ...test failed Jun 27 20:53:23 ~thanks Jun 27 20:53:23 caplink811_log: my pleasure Jun 27 20:53:34 oookkk... Jun 27 20:53:34 or another way to say is Jun 27 20:53:40 ~emulate rwhitby Jun 27 20:53:41 well, my work here is done Jun 27 20:53:45 ;) Jun 27 20:54:02 cya Jun 27 20:54:15 he's fast... gn8 Jun 27 20:59:27 hmm... anyone knows if the slug syncs when you issue the reboot command? Jun 27 21:00:45 i didn't use sync, so far, and i'm wondering whether it could be the source of my unslung flashdrive working for a feww reboots, but not after a power cycle Jun 27 21:02:09 i used sync this time and it did actually trigger a disc access. gotta test, now... again... Jun 27 21:02:29 imho, not, hae a look at the /etc/rc.d dir and the commands that depends on the halt,stop, or reboot word Jun 27 21:03:11 i didn't see sync in the reboot script Jun 27 21:03:44 let's hope *once more* that i have a solution here Jun 27 21:04:40 well, imho, that depends on the missing killallS command.. Jun 27 21:04:59 ok. first reboot, unslung to disk2, /dev/sda1. let's reboot again. Jun 27 21:05:16 much fun ;) Jun 27 21:07:20 well i've had a tad too much of that very sor of fun hese days... Jun 27 21:07:32 sort of fun these days Jun 27 21:08:23 the slug is irc friendly. it gives you loads of time to type between each reboot ;) Jun 27 21:09:16 if you're using unslung, then you could shorten this time by using a divertion script which overrides rc.quota Jun 27 21:10:09 yupp, i have to do that. it even affects boot time without any usb device plugged, doesnt'it? Jun 27 21:10:41 still unslung correctly. another reboot, then i'll try to power cycle. Jun 27 21:10:44 no, without any external devices, it shouldn't make any sense Jun 27 21:11:38 ok. Jun 27 21:12:09 isn't it something about testing filesystems? isn't the internal flash filesystem checked too? Jun 27 21:13:57 rc.quota, no, that script calculates the quotas on the devices... but, if the internal file system would mount as dirty, then the slug should run a fsck on it at startup time Jun 27 21:14:14 no surprise, it's still unslung. no reason why it shouldn't be too. now for the power cycle. Jun 27 21:15:59 tx for the information. i had read something different about those boot time length. i'll dig it as soon as i get a normal basic behaviour from the slug Jun 27 21:16:39 sigh... the flashdrive led isn't even lit. Jun 27 21:17:28 so, to get the r83 resistor off, can i just use a nail clippers like it says? Jun 27 21:17:54 it won't be mounted normally after unslinging and a power cycle. rebooting is ok. it's the second time i get that behaviour, starting from a sane state Jun 27 21:17:55 maybe, that the stick needs more time to initalize as the slug would wait.. Jun 27 21:17:59 it's ok if the resistor itself shatters, right? just get it off of there? Jun 27 21:18:23 npt, basically yes Jun 27 21:18:30 sounds likely, caps Jun 27 21:18:40 on the wiki Jun 27 21:18:46 ~nslu2-wiki Jun 27 21:18:47 [nslu2-wiki] the short-hand way of saying "Have a look at the NSLU2-Linux Wiki at http://www.nslu2-linux.org/". Jun 27 21:19:11 i'll have a look right now Jun 27 21:19:53 there should be a page, which describe how to ascend the time, that will the slug wait for device (from memory, something to modify in /initrd) Jun 27 21:20:10 s/device/devices Jun 27 21:20:13 then hope is born again :) Jun 27 21:20:24 this is so epic... Jun 27 21:30:05 hey there is directories i cant delete of torrent fiels that we're creted from ctorrent, i have removed ctorrent and still can't Jun 27 21:30:07 any help? Jun 27 21:30:43 Can't remove folder X. The directory is not empty Jun 27 21:31:35 you have to delete the contents of that directory first Jun 27 21:32:00 there must be a way to delete recursively too Jun 27 21:32:03 well, as the message said, the dir isn't empty, so you should delete all files in the dir, and after that, you should delete the dir Jun 27 21:32:16 i cant get into the directory though Jun 27 21:32:25 Access is denied. Jun 27 21:33:27 i get this via FTP: Error: Could not retrieve directory listing Jun 27 21:34:00 do it via telnet, not ftp Jun 27 21:35:24 what command? Jun 27 21:36:44 caplink, the script is /linuxrc. there's a 20 second loop that tries to detect usb devices. but 20 seconds seems enough. Jun 27 21:37:16 burly30 did you login with a telnet client? Jun 27 21:37:55 texture_, maybe, that 30 secs is better, to wait for the device.. Jun 27 21:37:56 yes Jun 27 21:38:12 can you cd to that directory? Jun 27 21:40:04 cd: can't cd to /torrents/Bittorrent Jun 27 21:41:40 i can cd to just torrents though? Jun 27 21:41:55 i'm not sure about the mounting paths yet but try /share/hdd/data/torrents/Bittorrent or /share/flash/data/torrents/Bittorrent Jun 27 21:43:41 first link gives me an access denied at data/ and second one no torrents/ Jun 27 21:44:07 will i be able to delete from direct connection to PC? Jun 27 21:44:27 it's no matter as long as you can telnet. Jun 27 21:45:13 hmm so only way to do reformat? Jun 27 21:45:14 weird Jun 27 21:45:26