**** BEGIN LOGGING AT Tue Aug 22 02:59:56 2006 Aug 22 03:12:11 jbholman, the best thing to do when flashing is to use a single cable to connect the slug to a pc Aug 22 03:20:02 tuv: okay, i will look into that Aug 22 03:30:10 okay, got in RedBoot... should be fine from here. sorry about the mixup. thanks! Aug 22 05:10:48 03:49 < jbholman> does the nslu2 revert to the default 192.168.1.77 static ip address when it is in upgrade mode? < didnt for me Aug 22 09:51:28 dose anybody know how to revoke an apt upgrade....after that mldonkey-server run in a Segmentation fault Aug 22 12:04:08 Hi, I have a short question before i go out an buy an NSLU2.. I have a maxtor one touch ||| 1tb running raid 1.. Can I use this without formating it? Its running ntfs right now and i saw it supports ntfs.. I just want to verify.. :) Aug 22 12:09:25 hmm.. just found out this question is for #openslug :) sorry Aug 22 12:12:43 is ok... :P Aug 22 12:32:32 You here to.. :] Aug 22 12:33:13 How sure are you btw? I dont have room for temp moving 500gb.. :/ Aug 22 12:33:55 But nslu2 looks soo cool, it actually almost tickle me a little.. :p Aug 22 12:34:13 tickle inside.. :p Aug 22 12:37:13 well.... we can google on ntfs and slug, but you must know that putting debian or openslug or unslung on the slug will require a linux partition on an external disk. Aug 22 12:37:36 that can of course be a small extra disk, to boot from, or usb stick, but not the ntfs disk Aug 22 12:46:02 i know.. I have an usb stick for that Aug 22 12:46:07 1gb should do it? Aug 22 12:47:00 offcorse it whould, but with extra packages and still lots of space left.. Aug 22 12:52:18 but an fully suported ntfs system will only work with unslug right? with ipkg install ufsd or something.. ? Aug 22 12:59:58 xeor: I think unslung 6.x offers NTFS-support straight from the 'packet' Aug 22 13:03:19 ehm, I meant 'package' Aug 22 13:04:03 yes, check the wiki Aug 22 13:04:45 http://www.nslu2-linux.org/wiki/Unslung/UnslungFeatures Aug 22 13:04:46 In http://www.nslu2-linux.org/wiki/FAQ/NTFS it list a couple of ntfs drivers but only one is fully supportet and thats Commercial Paragon NTFS for Linux, it also sais "The Paragon driver is available installation in Unslung as a ipkg. Install it (ipkg install ufsd) and the ipkg will download the Linksys firmware, extract the kernel module and install it. We can not distribute the module itself and must do it via this method" Aug 22 13:05:24 still the case with 6.x? Aug 22 13:05:26 hmm. the future list sais it has support.. :) Aug 22 13:06:15 think the FAQ/NTFS is for 5.x then? But that doesnt mean I can use ntfs with openslug Aug 22 13:07:00 true Aug 22 13:08:37 Soo im gonna buy an nslu2 now, gtg.. :=) Thanks for the help jelle and drif! Aug 22 14:04:08 I get an error message "No kernel modules were found. ... The install will probably fail to work if you continue without kernel modules" when trying to install debian on my slug using di Aug 22 14:04:27 what did I do wrong? Aug 22 14:04:29 =) Aug 22 14:04:54 I have tried several different mirrors Aug 22 14:11:45 ah.. en svensk =) Aug 22 14:11:59 jajemen :) Aug 22 14:13:10 When I try to start irssi I get the following message: Can't locate Irssi.pm in @INC (@INC contains: /root/.irssi/scripts /opt/share/irssi/scripts /opt/lib/perl5/5.8.6/armv5b-linux /opt/lib/perl5/5.8.6 /opt/lib/perl5/site_perl/5.8.6/armv5b-linux /opt/lib/perl5/site_perl/5.8.6 /opt/lib/perl5/site_perl .) at (eval 19) line 1. Aug 22 14:13:15 What is wrong? Aug 22 14:14:25 so i've flashed the latest openslug beta to my nslu2. after reboot, I cannot "find" sda using fdisk or any other methods. nothing shows up in dmesg. I have tried booting with the disk connected and connecting the disk after booting. I have also made sure I was connected the drive to the Disk 1 slot. My hard drive enclosure is an adaptec. Aug 22 14:16:56 anyone here using apache on a nslu2 ? Aug 22 16:28:10 related to my problem before: when i plug the drive into my debian etch box, my dmesg shows the following: Aug 22 16:28:28 usb 1-6: new high speed USB device using ehci_hcd and address 7 Aug 22 16:28:30 usb 1-6: configuration #1 chosen from 1 choice Aug 22 16:28:31 scsi2 : SCSI emulation for USB Mass Storage devices Aug 22 16:28:33 usb-storage: device found at 7 Aug 22 16:28:35 usb-storage: waiting for device to settle before scanning Aug 22 16:28:36 usb 1-6: USB disconnect, address 7 Aug 22 16:28:37 2:0:0:0: scsi: Device offlined - not ready after error recovery Aug 22 16:28:39 usb-storage: device scan complete Aug 22 17:38:05 anyone here using apache on a nslu2 ? Aug 22 17:38:09 me Aug 22 17:38:25 DrJ does it works good ? Aug 22 17:38:29 yes Aug 22 17:38:49 how about the nslu2? does it takes too much resources ? Aug 22 17:38:58 I've had no problems Aug 22 17:39:18 and do you have much traffic on your site ? Aug 22 17:39:20 it probably couldn't handle high traffic though Aug 22 17:39:43 how about settuping a blog Aug 22 17:39:54 like wordpress? Aug 22 17:40:16 yes or textpattern Aug 22 17:40:18 it could be done, but you would probably need to add php and mysql Aug 22 17:40:24 yes Aug 22 17:40:30 my first idea is joomla Aug 22 17:40:44 * DrJ loves wordpress Aug 22 17:41:13 never tried wp Aug 22 17:41:23 only textpattern and learning joomla Aug 22 17:41:24 http://JeremyJefferson.com <--my wordpress site Aug 22 17:41:50 is the one stored on the snlu2 ? Aug 22 17:42:12 no Aug 22 17:42:41 my nslu2 address is http://ww2.jwjkp.com but there is no site there Aug 22 17:42:58 I only use it as a way to quickly make text files available Aug 22 17:43:05 just bacon Aug 22 17:43:15 like scripts I help people on in a help channel on another net Aug 22 17:43:18 :) Aug 22 17:43:41 ok Aug 22 17:43:44 http://ww2.jwjkp.com/code.php <--about the only thing I use it for Aug 22 17:44:05 so you think nslu2 could handle a blog using apache + mysql and php ? Aug 22 17:44:30 probably, it would be slow if a lot of requests were being made though Aug 22 17:45:12 how much is a lot ? Aug 22 17:45:28 idk Aug 22 17:45:35 ok Aug 22 17:47:41 thanks for the help Aug 22 20:24:29 When I try to start irssi I get the following message: Can't locate Irssi.pm in @INC (@INC contains: /root/.irssi/scripts /opt/share/irssi/scripts /opt/lib/perl5/5.8.6/armv5b-linux /opt/lib/perl5/5.8.6 /opt/lib/perl5/site_perl/5.8.6/armv5b-linux /opt/lib/perl5/site_perl/5.8.6 /opt/lib/perl5/site_perl .) at (eval 19) line 1. Aug 22 20:24:34 What could be wrong? Aug 22 20:25:35 hi tobbe Aug 22 20:25:42 Hi again :) Aug 22 20:27:06 Tobbe: i think you have to install perl Aug 22 20:27:18 I have installed perl Aug 22 20:28:27 i think i have Irssi.pm get from my laptop and copy to the nslu but dont know the place let me see Aug 22 20:28:44 find / -name Irssi.pm Aug 22 20:28:59 find: /opt/share/www/gallery/2006/Trucks/trucks: Permission denied Aug 22 20:29:04 /opt/lib/perl5/5.8.6/Irssi/scripts/Irssi.pm Aug 22 20:29:04 /opt/lib/perl5/5.8.6/Irssi/Irssi.pm Aug 22 20:29:04 /opt/lib/perl5/5.8.6/Irssi.pm Aug 22 20:29:04 /opt/lib/Irssi.pm Aug 22 20:29:04 find: /opt/etc/cups/certs: Permission denied Aug 22 20:29:07 find: /opt/etc/cups/ssl: Permission denied Aug 22 20:29:09 find: /opt/var/run/cups/certs: Permission denied Aug 22 20:29:12 find: /opt/var/spool/cups: Permission denied Aug 22 20:29:14 find: /opt/i386-unknown-linux-gnu/etc: Permission denied Aug 22 20:29:17 find: /proc/1/fd: Permission denied Aug 22 20:29:20 find: /proc/2/fd: Permission denied Aug 22 20:29:22 find: /proc/3/fd: Permission denied Aug 22 20:29:25 find: /proc/4/fd: Permission denied Aug 22 20:29:27 find: /proc/5/fd: Permission denied Aug 22 20:29:30 find: /proc/6/fd: Permission denied Aug 22 20:29:32 find: /proc/7/fd: Permission denied Aug 22 20:29:35 find: /proc/8/fd: Permission denied Aug 22 20:29:38 find: /proc/9/fd: Permission denied Aug 22 20:29:40 find: /proc/12/fd: Permission denied Aug 22 20:29:43 find: /proc/14/fd: Permission denied Aug 22 20:29:45 find: /proc/18/fd: Permission denied Aug 22 20:29:48 find: /proc/27/fd: Permission denied Aug 22 20:29:50 find: /proc/50/fd: Permission denied Aug 22 20:29:53 find: /proc/51/fd: Permission denied Aug 22 20:29:56 find: /proc/54/fd: Permission denied Aug 22 20:29:58 find: /proc/55/fd: Permission denied Aug 22 20:30:01 find: /proc/56/fd: Permission denied Aug 22 20:30:03 find: /proc/147/fd: Permission denied Aug 22 20:30:06 find: /proc/296/fd: Permission denied Aug 22 20:30:08 find: /proc/320/fd: Permission denied Aug 22 20:30:11 find: /proc/322/fd: Permission denied Aug 22 20:30:14 find: /proc/332/fd: Permission denied Aug 22 20:30:16 find: /proc/347/fd: Permission denied Aug 22 20:30:19 find: /proc/352/fd: Permission denied Aug 22 20:30:21 find: /proc/356/fd: Permission denied Aug 22 20:30:24 find: /proc/365/fd: Permission denied Aug 22 20:30:26 find: /proc/375/fd: Permission denied Aug 22 20:30:29 find: /proc/377/fd: Permission denied Aug 22 20:30:32 find: /proc/379/fd: Permission denied Aug 22 20:30:34 find: /proc/465/fd: Permission denied Aug 22 20:30:37 find: /proc/703/fd: Permission denied Aug 22 20:30:39 find: /proc/707/fd: Permission denied Aug 22 20:30:42 find: /proc/717/fd: Permission denied Aug 22 20:30:45 find: /proc/731/fd: Permission denied Aug 22 20:30:45 upsie? Aug 22 20:30:47 find: /proc/747/fd: Permission denied Aug 22 20:30:50 find: /proc/5173/fd: Permission denied Aug 22 20:30:52 find: /proc/5175/fd: Permission denied Aug 22 20:30:55 find: /proc/5178/fd: Permission denied Aug 22 20:30:57 find: /share/hdd/data: Permission denied Aug 22 20:31:00 find: Filesystem loop detected; `/share/flash/data' has the same device number and inode as a directory which is 3 levels higher in the filesystem hierarchy. Aug 22 20:31:03 find: /share/flash/conf/lost+found: Permission denied Aug 22 20:31:06 find: /initrd/share/hdd/data: Permission denied Aug 22 20:31:08 find: /initrd/share/flash/data: Permission denied Aug 22 20:31:11 sorry Aug 22 20:31:13 tomuch data Aug 22 20:31:16 but here did i copy the file : Aug 22 20:31:19 22:38 < Mika_> /opt/lib/perl5/5.8.6/Irssi/scripts/Irssi.pm Aug 22 20:31:21 22:38 < Mika_> /opt/lib/perl5/5.8.6/Irssi/Irssi.pm Aug 22 20:31:24 22:38 < Mika_> /opt/lib/perl5/5.8.6/Irssi.pm Aug 22 20:31:26 22:38 < Mika_> /opt/lib/Irssi.pm Aug 22 20:32:40 Mika_: can you post your Irssi.pm somewhere so I can download it? Aug 22 20:34:21 btw, does anyone know what the latest version of adv_windowlist.pl is? Aug 22 20:34:22 Tobbe: http://jvanmanen.homelinux.net/pub/Projecten/Irssi.pm Aug 22 20:35:34 thanks Aug 22 20:38:07 Now I get "Can't locate Irssi/UI.pm in @INC (@INC conta..." Aug 22 20:38:21 yeah, it starts there Aug 22 20:38:33 wait until you get to those nice ones which require compiling... Aug 22 20:38:48 :( Aug 22 20:39:17 Mika_: if you have extensive perl library, could you probably share it with us more unfortunate? Aug 22 20:40:07 drif: what do you mean? Aug 22 20:40:18 and Tobbe let me look fir that file Aug 22 20:41:18 Tobbe: in /opt/lib/perl5/5.8.6/Irssi/UI.pm Aug 22 20:41:18 /opt/lib/perl5/5.8.6/Irssi/scripts/UI.pm Aug 22 20:42:08 sure, but I need the file as well ;) Aug 22 20:42:20 I don't have a linux machine to copy it from Aug 22 20:42:31 well, if you have managed to compile'em - I always end up with that situation when using perl -MCPAN and installing those required modules. When I get to the ones requiring compiling it fails and progress stops there Aug 22 20:42:47 Tobbe: http://jvanmanen.homelinux.net/pub/Projecten/UI.pm Aug 22 20:43:43 i got this irssi from bass but i missed that files and copy and try till it works fine for me.. Aug 22 20:43:56 so i have not compile it so i have no idea Aug 22 20:45:11 but atleast I confronted situation where some specific modules didn't work by just copying from pc Aug 22 20:45:51 but if you can provide us (piece by piece if not easier) with the required modules :P appreciated. Aug 22 20:45:54 yes ok..but with irssi it it working well Aug 22 20:46:20 I'd very much like to get more functionality to my irssi as well Aug 22 20:47:04 basz or bass know how he compile it.. Aug 22 20:47:17 bazz- is it sorry :) Aug 22 20:48:00 mika_: but do you mind giving us the modules per need? Aug 22 20:48:14 like trial and error... Aug 22 20:49:01 tobbe: or does it work already? Aug 22 20:49:03 i can give you the missing files... Aug 22 20:49:08 mika_: good Aug 22 20:49:09 thanks Aug 22 20:49:18 see those links you can downl it Aug 22 20:49:30 drif: No, now I need Irssi/TextUI.pm :) Aug 22 20:49:33 already did that ;) Aug 22 20:49:48 ok let me find it again Aug 22 20:50:18 Tobbe: /opt/lib/perl5/5.8.6/Irssi/scripts/TextUI.pm Aug 22 20:50:18 /opt/lib/perl5/5.8.6/Irssi/TextUI.pm Aug 22 20:50:20 mika: would it be easier to pack all of'em modules? atleast see how much space that would take? Aug 22 20:50:34 how can i do ? Aug 22 20:51:30 http://jvanmanen.homelinux.net/pub/Projecten/TextUI.pm Aug 22 20:51:36 mika_: well this might be overacting but first check: du /opt/lib Aug 22 20:51:37 but i think we are almost done Aug 22 20:51:37 thanks :) Aug 22 20:52:04 hope so Aug 22 20:52:08 168 /opt/lib/perl5/5.8.6/armv5b-linux/Devel Aug 22 20:52:08 16 /opt/lib/perl5/5.8.6/armv5b-linux/Digest Aug 22 20:52:08 20 /opt/lib/perl5/5.8.6/armv5b-linux/File Aug 22 20:52:08 20 /opt/lib/perl5/5.8.6/armv5b-linux/Filter/Util Aug 22 20:52:08 24 /opt/lib/perl5/5.8.6/armv5b-linux/Filter Aug 22 20:52:11 12 /opt/lib/perl5/5.8.6/armv5b-linux/I18N Aug 22 20:52:13 20 /opt/lib/perl5/5.8.6/armv5b-linux/IPC Aug 22 20:52:16 20 /opt/lib/perl5/5.8.6/armv5b-linux/PerlIO Aug 22 20:52:18 not here Aug 22 20:52:18 20 /opt/lib/perl5/5.8.6/armv5b-linux/Time Aug 22 20:52:21 just the outcome Aug 22 20:52:21 16 /opt/lib/perl5/5.8.6/armv5b-linux/Unicode Aug 22 20:52:24 36 /opt/lib/perl5/5.8.6/armv5b-linux/auto/DynaLoader Aug 22 20:52:26 16 /opt/lib/perl5/5.8.6/armv5b-linux/auto/B/C Aug 22 20:52:29 148 /opt/lib/perl5/5.8.6/armv5b-linux/auto/B Aug 22 20:52:31 32 /opt/lib/perl5/5.8.6/armv5b-linux/auto/ByteLoader Aug 22 20:52:34 20 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Cwd Aug 22 20:52:35 last line... Aug 22 20:52:36 36 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Data/Dumper Aug 22 20:52:39 (well too late now) Aug 22 20:52:39 40 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Data Aug 22 20:52:42 24 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Devel/DProf Aug 22 20:52:44 68 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Devel/PPPort Aug 22 20:52:47 28 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Devel/Peek Aug 22 20:52:49 124 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Devel Aug 22 20:52:52 24 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Digest/MD5 Aug 22 20:52:54 28 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Digest Aug 22 20:52:57 196 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Encode/Byte Aug 22 20:53:00 1080 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Encode/CN Aug 22 20:53:02 32 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Encode/EBCDIC Aug 22 20:53:05 1296 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Encode/JP Aug 22 20:53:07 1208 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Encode/KR Aug 22 20:53:10 40 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Encode/Symbol Aug 22 20:53:12 1072 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Encode/TW Aug 22 20:53:15 24 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Encode/Unicode Aug 22 20:53:18 4988 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Encode Aug 22 20:53:20 24 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Fcntl Aug 22 20:53:23 24 /opt/lib/perl5/5.8.6/armv5b-linux/auto/File/Glob Aug 22 20:53:25 28 /opt/lib/perl5/5.8.6/armv5b-linux/auto/File Aug 22 20:53:28 20 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Filter/Util/Call Aug 22 20:53:30 24 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Filter/Util Aug 22 20:53:33 28 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Filter Aug 22 20:53:35 24 /opt/lib/perl5/5.8.6/armv5b-linux/auto/I18N/Langinfo Aug 22 20:53:38 28 /opt/lib/perl5/5.8.6/armv5b-linux/auto/I18N Aug 22 20:53:41 28 /opt/lib/perl5/5.8.6/armv5b-linux/auto/IO Aug 22 20:53:43 20 /opt/lib/perl5/5.8.6/armv5b-linux/auto/IPC/SysV Aug 22 20:53:46 24 /opt/lib/perl5/5.8.6/armv5b-linux/auto/IPC Aug 22 20:53:48 32 /opt/lib/perl5/5.8.6/armv5b-linux/auto/List/Util Aug 22 20:53:51 36 /opt/lib/perl5/5.8.6/armv5b-linux/auto/List Aug 22 20:53:53 24 /opt/lib/perl5/5.8.6/armv5b-linux/auto/MIME/Base64 Aug 22 20:53:56 28 /opt/lib/perl5/5.8.6/armv5b-linux/auto/MIME Aug 22 20:53:58 32 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Opcode Aug 22 20:54:01 736 /opt/lib/perl5/5.8.6/armv5b-linux/auto/POSIX Aug 22 20:54:04 32 /opt/lib/perl5/5.8.6/armv5b-linux/auto/PerlIO/encoding Aug 22 20:54:06 20 /opt/lib/perl5/5.8.6/armv5b-linux/auto/PerlIO/scalar Aug 22 20:54:09 28 /opt/lib/perl5/5.8.6/armv5b-linux/auto/PerlIO/via Aug 22 20:54:11 84 /opt/lib/perl5/5.8.6/armv5b-linux/auto/PerlIO Aug 22 20:54:14 40 /opt/lib/perl5/5.8.6/armv5b-linux/auto/SDBM_File Aug 22 20:54:17 8 /opt/lib/perl5/5.8.6/armv5b-linux/auto/sdbm Aug 22 20:54:19 36 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Socket Aug 22 20:54:22 168 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Storable Aug 22 20:54:24 20 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Sys/Hostname Aug 22 20:54:27 24 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Sys/Syslog Aug 22 20:54:29 48 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Sys Aug 22 20:54:32 24 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Time/HiRes Aug 22 20:54:35 28 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Time Aug 22 20:54:37 292 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Unicode/Normalize Aug 22 20:54:40 296 /opt/lib/perl5/5.8.6/armv5b-linux/auto/Unicode Aug 22 20:54:42 32 /opt/lib/perl5/5.8.6/armv5b-linux/auto/XS/APItest Aug 22 20:54:45 40 /opt/lib/perl5/5.8.6/armv5b-linux/auto/XS/Typemap Aug 22 20:54:47 76 /opt/lib/perl5/5.8.6/armv5b-linux/auto/XS Aug 22 20:54:50 16 /opt/lib/perl5/5.8.6/armv5b-linux/auto/attrs Aug 22 20:54:53 160 /opt/lib/perl5/5.8.6/armv5b-linux/auto/re Aug 22 20:54:55 16 /opt/lib/perl5/5.8.6/armv5b-linux/auto/threads/shared Aug 22 20:54:58 32 /opt/lib/perl5/5.8.6/armv5b-linux/auto/threads Aug 22 20:55:00 7404 /opt/lib/perl5/5.8.6/armv5b-linux/auto Aug 22 20:55:03 448 /opt/lib/perl5/5.8.6/armv5b-linux/B Aug 22 20:55:06 44 /opt/lib/perl5/5.8.6/armv5b-linux/Data Aug 22 20:55:08 100 /opt/lib/perl5/5.8.6/armv5b-linux/Encode Aug 22 20:55:11 76 /opt/lib/perl5/5.8.6/armv5b-linux/IO Aug 22 20:55:13 16 /opt/lib/perl5/5.8.6/armv5b-linux/MIME Aug 22 20:55:16 28 /opt/lib/perl5/5.8.6/armv5b-linux/Sys Aug 22 20:55:18 16 /opt/lib/perl5/5.8.6/armv5b-linux/XS Aug 22 20:55:21 16 /opt/lib/perl5/5.8.6/armv5b-linux/threads Aug 22 20:55:23 3064 /opt/lib/perl5/5.8.6/armv5b-linux/CORE Aug 22 20:55:26 12224 /opt/lib/perl5/5.8.6/armv5b-linux Aug 22 20:55:29 60 /opt/lib/perl5/5.8.6/Attribute/Handlers/demo Aug 22 20:55:31 72 /opt/lib/perl5/5.8.6/Attribute/Handlers Aug 22 20:55:34 104 /opt/lib/perl5/5.8.6/Attribute Aug 22 20:55:36 12 /opt/lib/perl5/5.8.6/Carp Aug 22 20:55:39 92 /opt/lib/perl5/5.8.6/CGI/eg Aug 22 20:55:41 176 /opt/lib/perl5/5.8.6/CGI Aug 22 20:55:44 36 /opt/lib/perl5/5.8.6/Class Aug 22 20:55:47 44 /opt/lib/perl5/5.8.6/CPAN Aug 22 20:55:49 28 /opt/lib/perl5/5.8.6/DBM_Filter Aug 22 20:55:52 12 /opt/lib/perl5/5.8.6/Devel Aug 22 20:55:54 8 /opt/lib/perl5/5.8.6/Digest Aug 22 20:55:57 12 /opt/lib/perl5/5.8.6/Exporter Aug 22 20:55:59 12 /opt/lib/perl5/5.8.6/ExtUtils/Command Aug 22 20:56:02 24 /opt/lib/perl5/5.8.6/ExtUtils/Liblist Aug 22 20:56:05 28 /opt/lib/perl5/5.8.6/ExtUtils/MakeMaker Aug 22 20:56:07 736 /opt/lib/perl5/5.8.6/ExtUtils Aug 22 20:56:10 88 /opt/lib/perl5/5.8.6/File/Spec Aug 22 20:56:12 280 /opt/lib/perl5/5.8.6/File Aug 22 20:56:15 12 /opt/lib/perl5/5.8.6/Filter/Simple Aug 22 20:56:18 40 /opt/lib/perl5/5.8.6/Filter Aug 22 20:56:20 28 /opt/lib/perl5/5.8.6/Getopt/Long Aug 22 20:56:23 120 /opt/lib/perl5/5.8.6/Getopt Aug 22 20:56:25 12 /opt/lib/perl5/5.8.6/Hash Aug 22 20:56:28 56 /opt/lib/perl5/5.8.6/I18N/LangTags Aug 22 20:56:30 96 /opt/lib/perl5/5.8.6/I18N Aug 22 20:56:33 20 /opt/lib/perl5/5.8.6/IPC Aug 22 20:56:35 16 /opt/lib/perl5/5.8.6/Locale/Codes Aug 22 20:56:38 64 /opt/lib/perl5/5.8.6/Locale/Maketext Aug 22 20:56:41 228 /opt/lib/perl5/5.8.6/Locale Aug 22 20:56:43 8 /opt/lib/perl5/5.8.6/Math/BigFloat Aug 22 20:56:46 84 /opt/lib/perl5/5.8.6/Math/BigInt Aug 22 20:56:48 424 /opt/lib/perl5/5.8.6/Math Aug 22 20:56:51 56 /opt/lib/perl5/5.8.6/Memoize Aug 22 20:56:53 32 /opt/lib/perl5/5.8.6/Net/demos Aug 22 20:56:56 24 /opt/lib/perl5/5.8.6/Net/FTP Aug 22 20:56:59 16 /opt/lib/perl5/5.8.6/Net/Ping Aug 22 20:57:01 344 /opt/lib/perl5/5.8.6/Net Aug 22 20:57:04 12 /opt/lib/perl5/5.8.6/NEXT Aug 22 20:57:06 8 /opt/lib/perl5/5.8.6/PerlIO/via Aug 22 20:57:09 12 /opt/lib/perl5/5.8.6/PerlIO Aug 22 20:57:11 48 /opt/lib/perl5/5.8.6/Pod/Perldoc Aug 22 20:57:14 28 /opt/lib/perl5/5.8.6/Pod/Text Aug 22 20:57:17 628 /opt/lib/perl5/5.8.6/Pod Aug 22 20:57:19 8 /opt/lib/perl5/5.8.6/Search Aug 22 20:57:22 12 /opt/lib/perl5/5.8.6/Switch Aug 22 20:57:24 16 /opt/lib/perl5/5.8.6/Term/ANSIColor Aug 22 20:57:27 80 /opt/lib/perl5/5.8.6/Term Aug 22 20:57:30 52 /opt/lib/perl5/5.8.6/Test/Harness Aug 22 20:57:32 20 /opt/lib/perl5/5.8.6/Test/Simple Aug 22 20:57:35 204 /opt/lib/perl5/5.8.6/Test Aug 22 20:57:37 16 /opt/lib/perl5/5.8.6/Text/Balanced Aug 22 20:57:40 8 /opt/lib/perl5/5.8.6/Text/TabsWrap Aug 22 20:57:43 132 /opt/lib/perl5/5.8.6/Text Aug 22 20:57:45 12 /opt/lib/perl5/5.8.6/Thread Aug 22 20:57:48 132 /opt/lib/perl5/5.8.6/Tie Aug 22 20:57:50 28 /opt/lib/perl5/5.8.6/Time Aug 22 20:57:53 72 /opt/lib/perl5/5.8.6/Unicode/Collate Aug 22 20:57:55 152 /opt/lib/perl5/5.8.6/Unicode Aug 22 20:57:58 64 /opt/lib/perl5/5.8.6/unicore/To Aug 22 20:58:01 1264 /opt/lib/perl5/5.8.6/unicore/lib/gc_sc Aug 22 20:58:03 80 /opt/lib/perl5/5.8.6/unicore/lib/dt Aug 22 20:58:06 84 /opt/lib/perl5/5.8.6/unicore/lib/bc Aug 22 20:58:08 28 /opt/lib/perl5/5.8.6/unicore/lib/hst Aug 22 20:58:11 32 /opt/lib/perl5/5.8.6/unicore/lib/ea Aug 22 20:58:13 20 /opt/lib/perl5/5.8.6/unicore/lib/jt Aug 22 20:58:16 132 /opt/lib/perl5/5.8.6/unicore/lib/lb Aug 22 20:58:19 16 /opt/lib/perl5/5.8.6/unicore/lib/nt Aug 22 20:58:21 80 /opt/lib/perl5/5.8.6/unicore/lib/ccc Aug 22 20:58:24 1740 /opt/lib/perl5/5.8.6/unicore/lib Aug 22 20:58:26 5764 /opt/lib/perl5/5.8.6/unicore Aug 22 20:58:29 20 /opt/lib/perl5/5.8.6/User Aug 22 20:58:32 8 /opt/lib/perl5/5.8.6/warnings Aug 22 20:58:34 20 /opt/lib/perl5/5.8.6/auto/POSIX/SigAction Aug 22 20:58:37 24 /opt/lib/perl5/5.8.6/auto/POSIX Aug 22 20:58:39 28 /opt/lib/perl5/5.8.6/auto Aug 22 20:58:42 20 /opt/lib/perl5/5.8.6/B Aug 22 20:58:44 16 /opt/lib/perl5/5.8.6/Encode/JP Aug 22 20:58:47 8 /opt/lib/perl5/5.8.6/Encode/Unicode Aug 22 20:58:50 8 /opt/lib/perl5/5.8.6/Encode/KR Aug 22 20:58:52 12 /opt/lib/perl5/5.8.6/Encode/MIME Aug 22 20:58:55 12 /opt/lib/perl5/5.8.6/Encode/CN Aug 22 20:58:57 128 /opt/lib/perl5/5.8.6/Encode Aug 22 20:59:00 20 /opt/lib/perl5/5.8.6/IO/Socket Aug 22 20:59:02 24 /opt/lib/perl5/5.8.6/IO Aug 22 20:59:05 12 /opt/lib/perl5/5.8.6/List Aug 22 20:59:07 12 /opt/lib/perl5/5.8.6/Scalar Aug 22 20:59:10 4932 /opt/lib/perl5/5.8.6/pod Aug 22 20:59:13 20 /opt/lib/perl5/5.8.6/Irssi/scripts Aug 22 20:59:15 40 /opt/lib/perl5/5.8.6/Irssi Aug 22 20:59:18 29028 /opt/lib/perl5/5.8.6 Aug 22 20:59:20 4 /opt/lib/perl5/site_perl/5.8.6/armv5b-linux Aug 22 20:59:23 8 /opt/lib/perl5/site_perl/5.8.6 Aug 22 20:59:26 12 /opt/lib/perl5/site_perl Aug 22 20:59:28 29044 /opt/lib/perl5 Aug 22 20:59:31 1452 /opt/lib/php/extensions Aug 22 20:59:33 1456 /opt/lib/php Aug 22 20:59:36 52 /opt/lib/pkgconfig Aug 22 20:59:38 416 /opt/lib/cups/daemon Aug 22 20:59:41 852 /opt/lib/cups/backend Aug 22 20:59:44 3584 /opt/lib/cups/filter Aug 22 20:59:46 1196 /opt/lib/cups/cgi-bin Aug 22 20:59:49 4 /opt/lib/cups/driver Aug 22 20:59:51 124 /opt/lib/cups/monitor Aug 22 20:59:54 140 /opt/lib/cups/notifier Aug 22 20:59:56 6320 /opt/lib/cups Aug 22 20:59:59 16 /opt/lib/modules Aug 22 21:00:02 12 /opt/lib/glib-2.0/include Aug 22 21:00:04 16 /opt/lib/glib-2.0 Aug 22 21:00:07 156 /opt/lib/bx/help/7_Docs Aug 22 21:00:09 772 /opt/lib/bx/help/6_Functions Aug 22 21:00:12 92 /opt/lib/bx/help/3_Operators Aug 22 21:00:14 228 /opt/lib/bx/help/4_Misc/bind Aug 22 21:00:17 232 /opt/lib/bx/help/4_Misc/window Aug 22 21:00:20 560 /opt/lib/bx/help/4_Misc/set Aug 22 21:00:22 1100 /opt/lib/bx/help/4_Misc Aug 22 21:00:25 152 /opt/lib/bx/help/2_Queries Aug 22 21:00:27 372 /opt/lib/bx/help/8_Scripts Aug 22 21:00:30 112 /opt/lib/bx/help/1_General/dcc Aug 22 21:00:33 84 /opt/lib/bx/help/1_General/ctcp Aug 22 21:00:35 520 /opt/lib/bx/help/1_General Aug 22 21:00:38 312 /opt/lib/bx/help/5_Programming/on Aug 22 21:00:40 568 /opt/lib/bx/help/5_Programming Aug 22 21:00:43 3772 /opt/lib/bx/help Aug 22 21:00:46 312 /opt/lib/bx/script Aug 22 21:00:48 4 /opt/lib/bx/plugins Aug 22 21:00:51 136 /opt/lib/bx/translation Aug 22 21:00:53 4356 /opt/lib/bx Aug 22 21:00:56 4 /opt/lib/gnemul Aug 22 21:00:58 50972 /opt/lib Aug 22 21:01:01 i see i was think i get only the last line Aug 22 21:01:04 but Tobbe check it again i think Aug 22 21:01:19 Tobbe: is it work now ? Aug 22 21:01:33 Yes, it doesn't ask for any more files now :) Aug 22 21:01:36 Thank you Aug 22 21:01:46 ok good :) Aug 22 21:03:30 Irssi is so nice in screen over ssh ... i am happy you can enjoy it to now Tobbe Aug 22 21:04:30 I can't though :( I get "23:17 -!- ERROR Closing Link: 127.0.0.1 (Invalid username [n="Tobbe"])" Aug 22 21:07:10 you conect to localhost ? Aug 22 21:10:11 mika_ :) Aug 22 21:10:53 yumm irssi Aug 22 21:11:14 Mika_: I don't know where it got localhost from... This is what it says: http://rafb.net/paste/results/4HNHgv12.html Aug 22 21:11:35 And when I quit irssi I get four of these: GLib warning: - module 'perl/core' function 0xd20a4 Aug 22 21:11:49 mm i dont Aug 22 21:12:23 irssi is so popular, weird that there aren't any ipkg packages for it... Aug 22 21:12:33 debianslug! Aug 22 21:12:51 maybe a config problem ? Invalid username [n="Tobbe" Aug 22 21:13:03 but strange yes.. Aug 22 21:14:47 Tobbe: http://rafb.net/paste/results/9sCWNT52.html Aug 22 21:17:54 what do you guys get when entering "/set recode_fallback" in irssi? Aug 22 21:19:48 I can connect now :) It was a problem with my user_name. I reset it to Tobbe, and now it works :) Aug 22 21:20:10 This is Tobbe from my slug :) Aug 22 21:22:01 good ! Aug 22 21:23:45 Yes, I'm happy :) Aug 22 21:23:58 I gona sleep now :) Aug 22 21:24:12 Ok, goodnight, and thanks for your help Aug 22 21:25:54 bye Aug 22 21:26:04 nite to all Aug 22 21:26:42 nite Aug 22 22:07:24 nn Aug 22 23:25:19 looks like ppl like irssi Aug 22 23:29:51 indeed Aug 22 23:30:17 i'll see what i can do Aug 22 23:30:33 about what? Aug 22 23:30:34 for optware Aug 22 23:30:38 ah **** ENDING LOGGING AT Wed Aug 23 02:59:57 2006