**** BEGIN LOGGING AT Mon Aug 28 02:59:56 2006
Aug 28 03:27:16 <vicpylon> anybody got a minute for a question?
Aug 28 03:29:20 <vicpylon> I am having network issues with my slug. I just installed unslung and I cannot get it to ping my gateway router. I set the gateway addres, but that did not seem to work
Aug 28 03:30:04 <vicpylon> any ideas?
Aug 28 03:41:27 <eno> vicpylon: is your slug on the same subnet as the gateway? it needs to be
Aug 28 03:42:31 <vicpylon> yes
Aug 28 03:42:37 <vicpylon> I have been at this for hours
Aug 28 03:42:50 <vicpylon> I can ping any box on the network, just not the gateway
Aug 28 03:43:02 <vicpylon> or anything past the gateway
Aug 28 03:43:40 <eno> but other pc on the subnet can ping the gw?
Aug 28 03:44:03 <vicpylon> yes
Aug 28 03:44:54 <eno> what are the IP addresses?
Aug 28 03:44:55 <vicpylon> the other boxes can connect to the slug too
Aug 28 03:45:05 <vicpylon> slug: 192.168.3.77
Aug 28 03:45:21 <vicpylon> laptop:192.168.3.2
Aug 28 03:45:29 <vicpylon> gateway/router:192.168.3.1
Aug 28 03:45:42 <vicpylon> I even looked at the route table in the slug and it seemed ok
Aug 28 03:46:40 <eno> subnet mask all 255.255.255.0 ?
Aug 28 03:47:17 <eno> is your router also a dhcp server?
Aug 28 03:47:22 <vicpylon> yes
Aug 28 03:47:34 <vicpylon> tried that too, but it did not work
Aug 28 03:47:44 <eno> what is the dhcp IP address pool range?
Aug 28 03:47:49 <vicpylon> 192.168.3.0     *               255.255.255.0   U     0      0        0 ixp0
Aug 28 03:47:49 <vicpylon> 127.0.0.0       *               255.255.255.0   U     0      0        0 lo
Aug 28 03:47:58 <vicpylon> 192.168.3.2-11
Aug 28 03:48:49 <eno> physically all connect to the same switch/hub?
Aug 28 03:48:54 <vicpylon> yes
Aug 28 03:49:02 <vicpylon> all go to the router
Aug 28 03:49:06 <vicpylon> a belkin
Aug 28 03:49:23 <eno> that's really wierd
Aug 28 03:49:32 <vicpylon> no kidding, it is driving me crazy
Aug 28 03:50:03 <eno> if i were you, at this point, i'm going to restart the router
Aug 28 03:51:28 <vicpylon> got it
Aug 28 03:51:31 <vicpylon> I am an idiot
Aug 28 03:51:52 <vicpylon> the wireless mac filtering also affects the wired lan, but only partially
Aug 28 03:52:07 <vicpylon> some thing work, but the net is blocked
Aug 28 03:52:19 <vicpylon> but other stuff on the lan can ping the box
Aug 28 03:52:22 <eno> hmm, "wireless mac filter"
Aug 28 03:53:03 <vicpylon> actually, in the designers defence, it says only "mac filtering" I just assumed it was for the wireless
Aug 28 03:53:05 <vicpylon> my bad
Aug 28 03:53:39 <eno> so it's one function of the router?
Aug 28 03:54:21 <vicpylon> yes
Aug 28 03:54:44 <eno> something like, only 192.168.3.2-30 can connect to gw?
Aug 28 03:55:32 <vicpylon> no, it is based on the MAC hex address
Aug 28 03:56:00 <eno> i c, so you need to add slug's MAC to the white list
Aug 28 03:56:09 <vicpylon> yes
Aug 28 03:56:15 <vicpylon> did it and it works great
Aug 28 03:56:19 <vicpylon> thanks for the help
Aug 28 03:56:48 <eno> i did not help, i only learned one more troubleshooting scenario
Aug 28 03:58:17 <vicpylon> yes, confused me to, my old wrt54g only applied it to the wireless, but it may have been on the lan too and I just never noticed
Aug 28 04:00:13 <vicpylon> if nothing else, my pain might save someone else some time
Aug 28 04:00:25 <eno> exactly
Aug 28 04:01:13 <vicpylon> do you have any experience with the torrent client on the slug
Aug 28 04:01:19 <vicpylon> ?
Aug 28 04:18:40 <joshin> Anyone install the APEX bootloader?  I'm thinking of fattening my slug and was wondering if there were any issues not covered in the wiki.
Aug 28 05:05:14 <ludomatic> hi all
Aug 28 05:05:56 <ludomatic> I have a Lynksys and tried to install "torrent" package
Aug 28 05:06:33 <ludomatic> then it seems I can access admin page via "busybox"
Aug 28 05:07:13 <ludomatic> but my deamon S80busybox_httpd doesn't start
Aug 28 05:08:09 <ludomatic> in fact there is no /usr/sbin/busybox_httpd
Aug 28 05:10:12 <ludomatic> I've tried $ ipkg install -force-reinstall busybox
Aug 28 05:10:49 <ludomatic> and even $ find / | grep busybox_httpd
Aug 28 05:10:54 <ludomatic> with no success
Aug 28 05:11:11 <ludomatic> I can't have busybox httpd running
Aug 28 05:11:16 <ludomatic> any idea?
Aug 28 05:40:48 <ludomatic> anybody? am I on the right channel?
Aug 28 06:01:00 <joshin> ludomatic, what about a "ln -s busybox httpd"?
Aug 28 06:01:07 <joshin> or busybox httpd?
Aug 28 06:01:35 <joshin> Bedtime for me here in GMT-7 so good luck!
Aug 28 06:11:15 <ludomatic> the file  S80busybox_httpd need
Aug 28 06:11:30 <ludomatic>  /usr/sbin/busybox_httpd
Aug 28 06:13:45 <ludomatic> I've tried to launch # busybox 
Aug 28 06:13:59 <ludomatic> directly with the default args:
Aug 28 06:14:06 <ludomatic> # busybox -c /root/httpd.conf -p 8008 -h /opt/share/www
Aug 28 06:14:17 <ludomatic> but it replies:
Aug 28 06:14:27 <ludomatic> -c: applet not found
Aug 28 06:14:40 <ludomatic> I think I talk to the wrong "busybox"
Aug 28 06:15:32 <ludomatic> I've also tried # busybox httpd
Aug 28 06:15:45 <ludomatic> it returns:
Aug 28 06:15:46 <ludomatic> httpd: applet not found
Aug 28 06:15:58 <ludomatic> # busybox
Aug 28 06:16:04 <ludomatic> returns:
Aug 28 06:17:58 <ludomatic> Currently defined functions: [, [[, ash, basename, bunzip2, busybox, bzcat, cat, chgrp, chmod, chown, chroot, chvt, clear, cmp, cp, cut, date, dd, deallocvt, df, dirname, dmesg, du, echo, egrep, env, expr, false, fdisk, fgrep, find, free, grep, gunzip, gzip, hdparm, head, hexdump, hostname, id, ifconfig, insmod, install, ip, kill, killall, klogd, ln, logger, logname, ls, lsmod, md5sum, mkdir, mkfifo, mknod, modprobe, more, mount, mv, nc, n
Aug 28 06:18:00 <ludomatic> etstat, openvt, pidof, ping, ping6, pivot_root, ps, pwd, readlink, reset, rm, rmdir, rmmod, route, sed, sh, sleep, sort, strings, swapoff, swapon, sync, syslogd, tail, tar, tee, test, time, top, touch, tr, true, tty, umount, uname, uncompress, uniq, unzip, uptime, usleep, vi, wc, which, whoami, xargs, yes, zcat
Aug 28 06:18:48 <ludomatic> I've also installed: busybox-data and busybox-links
Aug 28 06:18:57 <ludomatic> with no success.
Aug 28 07:57:45 <vicpylon> Got a squid question. Anyone using it?
Aug 28 07:57:52 <vicpylon> on their slug?
Aug 28 08:12:49 <giallu> I'm planning to install it, but not tthere yet...
Aug 28 08:16:27 <nailbags> vicpylon: is the question about squid in general or specific to nslu2?
Aug 28 08:22:37 <vicpylon> nslu2
Aug 28 08:22:52 <vicpylon> I cannot get the thing to stay running, it starts and then dies 3o seconds later
Aug 28 08:25:01 <vicpylon> squid, that is
Aug 28 08:26:15 <nailbags> anything in logs?
Aug 28 08:26:28 <nailbags> does it exit or crash?
Aug 28 08:32:50 <vicpylon> I am a squid newbie
Aug 28 08:32:54 <vicpylon> where are the logs buried?
Aug 28 08:37:30 <nailbags> '/var/log/squid/*' (usually)
Aug 28 08:45:14 <vicpylon> /opt/var/squid/logs
Aug 28 14:15:37 <Nymus> damn hard gettin inhere
Aug 28 14:22:10 <drif> I see messages are out of the picture
Aug 28 14:22:28 <Nymus> ?
Aug 28 14:22:46 <drif> nymus: join #drif.nymus
**** ENDING LOGGING AT Tue Aug 29 02:59:56 2006