**** BEGIN LOGGING AT Sun Oct 01 02:59:57 2006 Oct 01 07:41:45 i have a problem with the connection of my nslu2 to my dsl router .... connected to my pc all works fine but if i connected it to the router the ethernet led blinks constantly and if i ping the nslu from another pc the ping comes very very slow Oct 01 07:42:08 and i cant log in with ssh anymore because it times out Oct 01 07:42:38 is that a known problem Oct 01 08:00:38 HI Oct 01 08:00:56 Can I ask someone a question? Oct 01 08:01:10 you don't need to ask Oct 01 08:01:15 just ask ;) Oct 01 08:01:38 I have just installed Unslung and now I'm trying to install and use some packages. Oct 01 08:02:02 The problem I run into is that the init.d is not a directory. Oct 01 08:02:38 HOw can that be solved? Oct 01 08:03:03 you mean /opt/etc/init.d is file? Oct 01 08:04:10 yes Oct 01 08:04:19 I can't use cd init.d Oct 01 08:05:22 I'm a NSLU2/Linux noob but from what I understand that is the startup thingy, the scripts in there run on/after startup. Oct 01 08:06:13 I have wague memory someone else having that very same problem Oct 01 08:08:49 any idea on the solution? Oct 01 08:09:53 could you paste output of ls -la /opt/etc | grep -i init Oct 01 08:10:46 Here it is..... Oct 01 08:10:48 -rwxr-xr-x 1 root root 460 Sep 30 14:13 init.d Oct 01 09:11:51 hansem72, can you pastebin the content of /opt/etc/init.d? Oct 01 10:40:41 I have just installed Unslung and now I'm trying to install and use some packages. Oct 01 10:40:55 The problem I run into is that the init.d is not a directory. Oct 01 10:41:12 HOw can that be solved? Oct 01 10:50:19 [11:29] hansem72, can you pastebin the content of /opt/etc/init.d? Oct 01 12:24:12 is there a know problem of nslu2 not working properly with sinus 154 dsl router? Oct 01 14:21:47 g Oct 01 14:33:05 Lunar_Lamp, h Oct 01 14:33:16 :-p Oct 01 14:33:18 sorry Oct 01 14:33:25 :) Oct 01 14:33:25 i was typing a command into irc whilst still connecting Oct 01 14:33:36 and joined here at the exact second i typed "g" and enter Oct 01 16:52:18 happy sunday afternoon fellow sluggers Oct 01 16:54:49 thanks dude Oct 01 16:54:50 you too Oct 01 16:54:51 :) Oct 01 17:14:16 anyone recommend an animated gif maker for windows (free) ? Oct 01 17:15:29 i *think* GIMP may be able to do it Oct 01 17:37:18 Hi! Does anyone have the original contents of /opt/etc/init.d of unslung 6.8? Oct 01 17:37:42 Think I managed to destroy it when installing cups :-( Oct 01 17:37:48 was there anything in it originally? Oct 01 17:44:25 i'm pretty sure on a fresh install with just cups installed you should only hace S88cups Oct 01 17:45:20 assuming, that he did something wrong, e.g. cp /opt/shre/doc/S88cups /opt/etc/init.d (without the existing init.d directory) Oct 01 17:46:03 so Guest4963 just rm /opt/etc/init.d; mkdir /opt/etc/init.d and then copy the cups start file to /opt/etc/init.d# Oct 01 17:46:25 without # (fat thumb syndrom) Oct 01 17:46:57 morning, btw Oct 01 17:47:38 oh, caplink811_log, you wouldn't happen to have that miau.conf that you pasted the other night? i closed xchat without saving the url of the pastebin Oct 01 17:47:48 (still not managed to make miau persistent) Oct 01 17:49:10 Lunar_Lamp, http://pastebin.ca/186369 Oct 01 17:49:18 thanks! :-D Oct 01 17:50:04 Guest4963 / Hansem72 still around? Oct 01 17:51:38 er, caplink811_log - you left your password in that file :-s Oct 01 17:51:50 now i'm not going to abuse it, but it's technically a public file Oct 01 17:52:31 sure, but i'd change it before posting.. but thx anyway Oct 01 17:56:38 thanks! Oct 01 18:00:49 np Oct 01 18:27:52 caplink811 Oct 01 18:28:00 i have miau working sort of now Oct 01 18:28:06 yep Oct 01 18:28:10 it doesn't leave the server when i quit Oct 01 18:28:14 but it still parts channels Oct 01 18:28:19 however Oct 01 18:28:27 i think that may be to do with my client Oct 01 18:28:30 (xchat) Oct 01 18:28:39 any knowledge on that front? Oct 01 18:29:27 hm, if you use the config which i've posted, it should work, i use xchat too, and the config is the one, which runs on my miau 0.62 Oct 01 18:29:29 the miau.conf is explicitly set to not quit Oct 01 18:29:39 how do you quit the server? Oct 01 18:29:55 i just click the red cross with the server tab selected Oct 01 18:30:31 as EvilDevil said some days ago, i use the little x in the right top corner of the window ;) Oct 01 18:30:49 hmm Oct 01 18:30:56 that's exactlt what i do :-( Oct 01 18:31:05 i'm going to investigate a bit more Oct 01 18:31:17 miau never leaves a server, what happens, is the client disconnect from miau, nothing else Oct 01 18:31:26 exactly Oct 01 18:31:35 it was quitting the server previously though ;-) Oct 01 18:31:48 don't know why, but it's fixed now, which is all i care about! Oct 01 18:43:33 hmm, it seems the solution is to "/quote quit" and then close the server tab Oct 01 18:52:52 hi guys Oct 01 18:52:57 little question Oct 01 18:53:42 ask away! Oct 01 18:54:07 which conf file should I modify to change the default port of my thttpd server? Oct 01 18:55:17 mileuh, use the webinterface for that intention Oct 01 18:56:09 woops I can't have missed that option... Oct 01 18:56:23 Does anyone know what a constant flashing green Ready/Status light means? Oct 01 18:56:27 gonna check that.. Oct 01 18:56:29 thx Oct 01 18:56:31 I can't get it to boot Oct 01 18:57:37 Ignun, have you tried to plug off the powercord (~15 secs), and then replugin, and try to switch on the nslu2? Oct 01 18:57:38 I can get in to Redboot and have tried putting the Linksys firmware back but still the same thing Oct 01 18:57:54 f**ck, you were right, I missed that option :) thx! Oct 01 18:57:55 I'll try that now Oct 01 18:58:41 mileuh, that's the only way which works permanently Oct 01 18:59:21 ok caplink, thx a lot Oct 01 18:59:24 np Oct 01 19:00:47 by the way, where are located the files that are modified by the web interface? Oct 01 19:01:48 those files will rebuild after each reboot via a linksys process, so it is impossible to change this manually Oct 01 19:01:59 Still appears to be stuck at the same point...starts to boot but status light just flashes green. Oct 01 19:02:06 in this case /etc/thttpd.conf Oct 01 19:02:46 Ignun, no more ideas about this topic :( Oct 01 19:03:07 hi again Oct 01 19:03:16 I can't seem to find anything online about it either Oct 01 19:03:29 thx caplink Oct 01 19:03:30 as far as I can tell it is working properly beyond that...At least Redboot is Oct 01 19:03:35 Ignun - are you trying to boot with drives detatched? Oct 01 19:03:38 yes Oct 01 19:03:41 Does anyone know what to do when I get /opt/sbin/cupsd: error while loading shared libraries: libz.so: cannot open shared object file: No such file or directory Oct 01 19:03:51 when trying to start cups... Oct 01 19:03:51 should I have a drive attached? Oct 01 19:03:56 Guest4963, ipkg install zlib Oct 01 19:04:07 thnks Oct 01 19:04:25 encore, np Oct 01 19:04:40 aren't there any dependency checks in ipkg? Oct 01 19:04:50 My plan is to unsling it but since it isn't working at all right now trying to get it back to square 1 Oct 01 19:05:05 normally, yes, but the package maintainer have to maintain this Oct 01 19:05:26 is it possible there is something wrong with the v23r63 firmware? Oct 01 19:05:47 ignun: for how long have you waited? Oct 01 19:06:07 I'm 5+ min now since it started flashing green Oct 01 19:06:41 Ignun, is this a brandnew device? Oct 01 19:06:47 yes Oct 01 19:06:54 Ignun: I had the same issue when I tried unslinging.. It takes a while.. Oct 01 19:07:01 I had to wait 10 min Oct 01 19:07:02 it can take a while Oct 01 19:07:33 ignun: I had the same experience todau on unslung 6.8, thought it would never go to steady so I had a shower and when I came back it was all there. Oct 01 19:07:33 if it wont boot, without an attached drive, then you should return it Oct 01 19:07:33 it worked with the linksys firmware so I tried unslinging and just got flashing green from there Oct 01 19:07:33 I can't return it...already overclocked it Oct 01 19:07:33 Guest: exactly the same for me :) Oct 01 19:08:18 It has the linksys firmware again...guess it might be worth putting Unslung on it and ignoring it for 30min or so Oct 01 19:08:18 Ignun, ah ok, i c Oct 01 19:08:23 Guess I could return it and play dumb but thats not very honest Oct 01 19:08:42 ignun :) Oct 01 19:10:59 I'm going to push unslung out to it again via the Upgrade Util and then forget about it for a while I guess Oct 01 19:11:06 After installing openssl, any idea where I should find the binary? Oct 01 19:11:25 ahh, /opt/bin Oct 01 19:11:51 it seems to upgrade fine and Redboot works without a hitch so I don't know where the problem is Oct 01 19:12:34 Ignun, that behavior is with or without a disk attached? Oct 01 19:12:55 without Oct 01 19:13:02 I haven't plugged a disk in to it yet Oct 01 19:13:07 k Oct 01 19:13:19 and the firmware is unslung-6.8? Oct 01 19:13:39 I was trying to push the linksys firmware back but I am pushing the unslung 6.8 beta to it now Oct 01 19:14:06 I'm assuming its all beta and there is no 6.8 release Oct 01 19:15:09 alpha and beta states depends on the quantity of users... Oct 01 19:15:56 so the state isn't significant Oct 01 19:16:10 the upgrade util said it upgraded sucessfully to unslung 6.8...so guess we'll see what happens Oct 01 19:16:24 * tuv misses debianSlug users in the channel :( Oct 01 19:16:32 which utility? upslug2 / sercomm / linksys ? Oct 01 19:16:38 sercomm Oct 01 19:16:47 * caplink811_log is at least opendebianslug user Oct 01 19:17:13 it just came online...my linksys v23r63 must have been bad Oct 01 19:17:27 it took the unslung this time Oct 01 19:17:54 nice :) Oct 01 19:18:31 was worried I had just spend $100 on a brick Oct 01 19:18:33 :) Oct 01 19:18:55 on a different note, the Vikings are killing my football gamblin this week Oct 01 19:19:48 * tuv greets caplink811_log :) Oct 01 20:09:13 I'm back agian....has anyone had an issue with the device going offline when doing something Oct 01 20:12:26 Its like its crashing Oct 01 20:12:39 loses disk and status light goes out...ethernet light stays lit Oct 01 20:13:38 maybe, that depends on your network infrastructure (use 100mbit/fullduplex on all devices), and disable upnp on the nslu (use the webinterface), maybe that the things would be better then Oct 01 20:14:09 I am 100mbit/full everywhere Oct 01 20:14:19 don't have the upnp disabled, I'll try that Oct 01 20:14:20 thanks Oct 01 20:14:46 and, you should read the mslu2-faq, and nslu2-howto also.. Oct 01 20:14:55 ~nsl2-faq Oct 01 20:15:00 ~nslu2-faq Oct 01 20:15:01 ok, so you should have a look to http://www.nslu2-linux.org/wiki/FAQ/HomePage Oct 01 20:15:05 ~nslu2-howto Oct 01 20:15:06 have a look at the HowTo's at http://www.nslu2-linux.org/wiki/HowTo/HomePage Oct 01 20:15:41 doing some reading on it now... Oct 01 20:21:36 still went offline after transfering a couple of files Oct 01 20:36:04 When you install unslung does it completly replace the running Linksys firmware or just augment it? Oct 01 20:37:31 it completely replaces it - but it's based on Liksys's firmware with additional features Oct 01 20:37:50 its a completly repalcement, but it based on the linksys fw, so you got some extentions, aka, you were able to install ipkg (packages) Oct 01 20:38:24 okay...I noticed as I went through some of the unslung menus that it still lists the Linksys firmware version on some pages in the upper right corner Oct 01 20:39:56 so was just wondering it that may be the source of my going offline problems...from what I read online the v23r63 linksys firmware is beta Oct 01 21:53:27 hm Oct 01 21:53:37 i'm sure my debianslug's load is bottoming out at 1.00 Oct 01 21:53:38 very odd **** ENDING LOGGING AT Mon Oct 02 02:59:57 2006