**** BEGIN LOGGING AT Mon Oct 02 02:59:57 2006 Oct 02 03:44:02 Hello Oct 02 03:46:52 Hello? Oct 02 03:47:31 Am having problems with bootstrap of debianslug to sid. Oct 02 03:47:54 ./usr/sbin/debootstrap --arch arm sid /mnt/debinst http://ftp.debian.org/debian Oct 02 03:48:09 This line does not work. When I look in the log, it says: Oct 02 03:48:32 wget: server returned error 404: HTTP/1.1 404 Not Found Oct 02 03:48:45 Anyone know how to deal with this? Oct 02 03:48:55 Is this the wrong url? Oct 02 08:51:38 morning ;) Oct 02 08:52:11 I could need some help with unslinging... somehow I always unsling to internal flash than to my hdd Oct 02 12:08:51 hey there Oct 02 12:09:06 hi Oct 02 12:10:19 anyone willing to help me with some basic questions? Oct 02 12:10:32 yep Oct 02 12:10:42 fine. thx in advance Oct 02 12:10:48 np Oct 02 12:11:03 i have used the web interface to bring my nslu2 from the factory firmware to unslung 6.8 Oct 02 12:11:17 but it unslung to the internal flash memory. how can i put it on my attached HDD? Oct 02 12:12:13 are you sure you have followed the installation guide provided with the firmware? Oct 02 12:12:52 it said something like "is your nslu2 a virgin? use the web interface to install unslung" Oct 02 12:18:05 http://www.nslu2-linux.org/wiki/HowTo/InstallUnslungFirmware to be precise Oct 02 15:00:28 hi there, need help please... Oct 02 15:01:29 my cannot connect to my nslu2 ... Oct 02 15:02:05 the eraseall tool erased my nslu2 and now i cant enter into redboot! Oct 02 15:48:12 I followed the install tutorial on http://www.nslu2-linux.org/wiki/OpenSlug/InitialisingDisks and it worked great except I think that my swap isn't working. When I type "swapon /dev/sda2" (which is indeed my swap partition) I get the "device or resource busy" which is true since /dev/sda1 is my root. Trouble is, I'm not sure how to make /dev/sda2 not busy. Any tips? Oct 02 15:49:22 is unmounting an option? Oct 02 15:49:28 i haven't used openslug so i dont knwo Oct 02 15:49:58 I dunno. I did try umounting /dev/sda1 and 2 and it didn't give me any issues. Still had the same problem though. Oct 02 16:37:57 Hi! Just copied a large file between two HDDs on the same hub on the NSLU2 and I am wondering if I reach a reasonable performance or if the printer on the same hub slows it down. I get about 540MB copied in 5 minutes. Oct 02 17:34:57 seems to be normal speed Guest7924 Oct 02 18:00:53 bitviper, could you post the output of fdisk -l /dev/sda? Oct 02 18:04:01 caplink811_log> root@backupdude:~# fdisk -l /dev/sda Oct 02 18:04:01 Disk /dev/sda: 400.0 GB, 400088457216 bytes Oct 02 18:04:01 255 heads, 63 sectors/track, 48641 cylinders Oct 02 18:04:01 Units = cylinders of 16065 * 512 = 8225280 bytes Oct 02 18:04:01 Device Boot Start End Blocks Id System Oct 02 18:04:02 /dev/sda1 1 48547 389953746 83 Linux Oct 02 18:04:04 /dev/sda2 48548 48641 755055 82 Linux swap Oct 02 18:04:21 sorry for taking awhile (had a meeting pop up) Oct 02 18:04:54 Bitmaster, and you're sure, that you run the mkswap /dev/sda2 command? Oct 02 18:08:24 sure did Oct 02 18:08:28 I'll do it again Oct 02 18:09:52 root@backupdude:~# mkswap /dev/sda2 Oct 02 18:09:52 Setting up swapspace version 1, size = 773169152 bytes Oct 02 18:09:52 root@backupdude:~# swapon /dev/sda2 Oct 02 18:09:52 swapon: /dev/sda2: Device or resource busy Oct 02 18:09:52 root@backupdude:~# Oct 02 18:10:09 caplink811_log - how do i copy a file from my current computer to the slug using just ssh or similar? (i,e, when not on the slug's network) Oct 02 18:10:18 scp Oct 02 18:10:34 if you're on windows, try out winscp3 Oct 02 18:10:35 or winscp, depends on your environment Oct 02 18:11:06 i'm using ubuntu Oct 02 18:11:08 bitviper, this is after a fresh reboot? Oct 02 18:11:51 Lunar_Lamp, smb4k maybe (using smb protocol) Oct 02 18:12:13 would that work when not on the same network as the slug?! Oct 02 18:12:15 I did reboot in between last time Oct 02 18:12:20 I'll reboot again Oct 02 18:12:34 should I unmount / (which is /dev/sda1) after rebooting? Oct 02 18:12:44 Lunar_Lamp, sorry, overread that detail Oct 02 18:16:22 bitviper, no Oct 02 18:17:11 just after reboot, login, and use the free command, maybe that the swap switched in automagically Oct 02 18:19:44 caplink811_log - i can't get it go work: scp IDS lunarlamp.dyndns.org:/public/IDS Oct 02 18:19:45 root@backupdude:~# free Oct 02 18:19:45 total used free shared buffers Oct 02 18:19:45 Mem: 30300 17372 12928 0 820 Oct 02 18:19:45 Swap: 755044 0 755044 Oct 02 18:19:45 Total: 785344 17372 767972 Oct 02 18:19:55 that worries me that no swap is being used Oct 02 18:20:59 that maybe, there is free memory left, but your swap is where it should be, and it is switched on Oct 02 18:22:32 Lunar_Lamp, IDS is a file or a dir? Oct 02 18:22:39 it;s a file Oct 02 18:22:54 and the sshd on the slug is running? Oct 02 18:23:07 yeah, i'm sshing into the slug to test if it works Oct 02 18:23:26 it asks me for my password, i type it in, and it just prints "bash 3.1" and then quits Oct 02 18:23:30 never use scp before, so i'm unsure about the parameters.. Oct 02 18:23:47 (19:41) ed's in ~$ scp IDS ed@lunarlamp.dyndns.org:/public/IDS Oct 02 18:23:47 ed@lunarlamp.dyndns.org's password: Oct 02 18:23:47 BASH 3.1 Oct 02 18:23:47 (19:41) ed's in ~$ Oct 02 18:23:55 but the file isn't there Oct 02 18:26:09 Lunar_Lamp, try scp -v file user@target:/targetfile Oct 02 18:26:23 pls Oct 02 18:27:22 @caplink811_log: When I do swapon -s, I get: Oct 02 18:27:22 Filename Type Size Used Priority Oct 02 18:27:22 /dev/sda2 partition 755044 0 -1 Oct 02 18:27:32 I thought priority of -1 was bad Oct 02 18:28:44 caplink811_log http://pastebin.ca/189012 Oct 02 18:29:04 no, it isn't, so you have only one swap, that is unconcerned Oct 02 18:29:28 sweet! So swap is working? (even if it doesn't appear to be getting used?) Oct 02 18:29:48 shouldn't I see swap mounted when I look at the list of mounts? Oct 02 18:30:57 bitviper, just start apache and mysql, and the swap should used Oct 02 18:31:20 oh, back in 4 minutes Oct 02 18:31:36 bitviper, no, swap isn't show in the mount output Oct 02 18:31:46 thanks for your help cap! Oct 02 18:53:58 Lunar_Lamp, basically, it should work, this http://paste.tyneo.net/b9v27f-42 is a working example, i have just tried it on the internal net Oct 02 18:54:28 Lunar_Lamp, btw, /public is writetable by this user? Oct 02 18:54:44 i'm 99% sure - but i'll just check Oct 02 18:55:06 yes it tis Oct 02 18:56:53 Lunar_Lamp, hm, so you can ssh in as user ed and do something like >/public/bla and /public/bla is in place? Oct 02 18:57:50 i can do "nano test" and save the resulting file as user ed Oct 02 18:57:51 yes Oct 02 18:59:15 k Oct 02 18:59:46 and the scp command is available for user ed on the slug too? Oct 02 19:00:13 hmm, that's a point Oct 02 19:00:16 i haven't checked that Oct 02 19:01:05 seems to be Oct 02 19:01:06 yes Oct 02 19:02:10 hm, but there must be a difference, see my line 43+44, which are missed in your pastebin Oct 02 19:03:07 yes Oct 02 19:03:17 i noticed that, but no idea what the problem is :-s Oct 02 19:07:52 * caplink811-log running out of ideas on that topic Oct 02 19:08:21 same here :-s Oct 02 19:10:31 i'm going to have to think upon this i think Oct 02 19:10:36 lsusb is that not working on the slug ? Oct 02 19:12:08 Mika_, basically, it works Oct 02 19:12:27 [root@linus root]$ lsusb --version Oct 02 19:12:27 lsusb (usbutils) 0.11 Oct 02 19:13:01 hmm let me search.. Oct 02 19:13:03 bash-3.1# lsusb Oct 02 19:13:03 bash: lsusb: command not found Oct 02 19:13:22 same here, i get nothing Oct 02 19:13:33 Lunar_Lamp, the only difference between our test environment, is, you're external, i'm internal. but ssh/scp only use port 22, so it should make no difference Oct 02 19:13:53 yeah, i tested it on internal network and i get same problem Oct 02 19:14:10 [root@linus root]$ ipkg list_installed|grep usb Oct 02 19:14:10 i just want to get it sorted before i go away, as then i'll be >300miles from my slug for over 2months Oct 02 19:14:10 libusb - 0.1.10a-6 - Library for interfacing to the USB subsystem. Oct 02 19:14:10 usbutils - 0.11-2 - USB enumeration utilities Oct 02 19:14:10 [ Oct 02 19:14:41 Mika_, maybe, it is a good thing, to install usbutils Oct 02 19:14:48 20:50.04mwesterNo - /opt/sbin/lsusb (if not present, do ipkg install usbutils to install) Oct 02 19:14:52 i found it :) Oct 02 19:15:38 Thx anyway .... Oct 02 19:16:21 Lunar_Lamp, so i dunno, what is the difference, i've tried that from an ubuntu6.06 machine, with key authentification, the target was an unslung5.5 nslu Oct 02 19:19:32 only diff i can think is that i'm on unslung6.8 Oct 02 19:25:03 Lunar_Lamp, /msg is ok? Oct 02 19:25:07 yeah Oct 02 19:40:34 anyone a idea with cups .. it has work before but now in 6.8 i change the harddisk to usb2 and te printer to usb1 but now it wil not work i get a fauld in http://ipslug:631 Oct 02 19:40:38 Canon (Default Printer) "Printer not connected; will retry in 30 seconds..." Oct 02 19:40:59 he receive the jobs from my laptop only dont see the printer Oct 02 19:41:23 lsusb give this for my printer : Bus 002 Device 003: ID 04a9:1062 Oct 02 19:43:25 this is my printer config Oct 02 19:43:27 http://paste.ubuntu-nl.org/25518/ Oct 02 19:50:11 Mika_, did you read the troubleshooting section at http://www.nslu2-linux.org/wiki/HowTo/AddPrinter ? Oct 02 19:51:29 Yes ..maybe i miss something Oct 02 19:54:22 maybe here CUPS doesn't see my printer device. let me read Oct 02 19:59:54 hmm echo hoi > /dev/lp0 turns the printer on but give no print Oct 02 20:00:20 laser or ink ? Oct 02 20:00:35 or pageprinter, or lineprinter? Oct 02 20:02:21 inktjet S500 Oct 02 20:03:07 assuming, it is a lineprinter, so it should print each line, one by one Oct 02 20:03:30 yes if i am right Oct 02 20:05:19 but if i'm wrong, it is a good idea to send a "next page"/"page forward" to the printer, so it will print the current page Oct 02 20:06:25 the kernel see the printer : Oct 02 20:06:27 <46>Oct 2 22:18:57 klogd: hub.c: new USB device 00:01.0-1, assigned address 4 Oct 02 20:06:30 <44>Oct 2 22:18:57 klogd: Device descriptor:8 bytes received. Oct 02 20:06:33 <44>Oct 2 22:18:57 klogd: Device descriptor:18 bytes received. Oct 02 20:06:36 <46>Oct 2 22:18:57 klogd: printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1062 Oct 02 20:06:54 i send more then one page to the printer Oct 02 20:07:13 well, then it should print at least one page Oct 02 20:08:21 nope http://slug:631/printers/Canon gives stil "Printer not connected; will retry in 30 seconds... Oct 02 20:08:47 I wil try it direct on my laptop to see that is working Oct 02 20:09:16 it is a half year ago the last time i printed Oct 02 20:26:05 And that way it is working.. i wil figure out later..now i gona sleep Oct 02 20:26:57 gn8 Mika_ :) Oct 02 20:29:16 Gn8 caplink811-log and thx again Oct 02 20:38:38 mika_ :) Oct 02 20:39:03 capbot: :) Oct 02 21:05:00 Hello, anyone know about updating modules using debianslug? When I follow the directions on the bootstrap documentation it says that package kernel-image-2.6.16 is not installed and that update-modules is not installed. These are both ipkg packages installed on the firmware so I guess dpkg shouldn't know about them but they are dependencies so the modules will not install. Oct 02 21:05:41 I am trying to use a zd1211 usb device. Oct 02 21:09:03 giallu, do you use debianslug or know anything about installing kernel modules? Oct 02 21:09:30 esalazar_foo, "no" and "not really" Oct 02 21:09:35 sorry Oct 02 21:10:00 in generaly I guess you install modules like any other package Oct 02 21:10:06 but never tried Oct 02 21:13:04 Well the problem is that the running kernel is from the firmware but that is not visible to dpkg. So installing firmware modules from the ipkg feed won't work because of failed dependencies and installing modules from the debian repos seems like the wrong thing to do and also does not work. **** ENDING LOGGING AT Tue Oct 03 02:59:57 2006