**** BEGIN LOGGING AT Thu Oct 26 02:59:57 2006
Oct 26 03:19:17 <Cody123> thanks
Oct 26 08:01:06 <nybble> hey guys.. anyone be able to point me in the right direction on how to actually telnet into a freshly unslung box (so i can do the unslinging to disk)
Oct 26 08:01:31 <nybble> enabling telnet from the web interface allows me to log in and then be kicked out
Oct 26 08:03:08 <nybble> i have searched the wiki, but i'll check it again
Oct 26 08:08:25 <nybble> duh i'm an idiot
Oct 26 08:10:35 <blaster8> ?
Oct 26 08:11:23 <nybble> nvm. I'm the self-helping idiot. lol
Oct 26 08:12:58 <blaster8> best sort
Oct 26 08:15:11 <nybble> heh. that'll teach me to read the readme while half asleep
Oct 26 08:16:21 <widrone> heh, that usually gets you a couple of hours more work... 
Oct 26 08:17:07 <widrone> Got me into a mess too first time I was halfass reading the debianslug bootstrap walkthru. 
Oct 26 08:17:47 <widrone> "I know this" got me a demolished install, and then the chanse to doo it all again. 
Oct 26 08:18:29 <nybble> oooh. what a prize
Oct 26 09:00:40 <nkuttler> grmbl...  The default action is to keep your current version. *** S40sshd (Y/I/N/O/D) [default=N] ?d
Oct 26 09:00:45 <nkuttler> diff: No such file or directory
Oct 26 09:01:25 <nkuttler> i guess ipkg should depend on diff
Oct 26 15:25:41 <fick> hi
Oct 26 15:25:58 <fick> anyone here with knowledge about unslung plz?
Oct 26 15:29:43 <nkuttler> just ask your real question
Oct 26 15:30:38 <fick> ok, sorry. its about unslinging. i tried to unsling a drive many times exactly as the readme tells me on how to do this
Oct 26 15:30:48 <fick> i cant get the job done
Oct 26 15:31:17 <fick> it keeps saying that theres nothing to mount and the webinterface says status 'busy' on this drive
Oct 26 15:31:36 <fick> i found the site a very small explaination about this problem
Oct 26 15:31:51 <fick> i also tried the command they told in that posting
Oct 26 15:31:56 <fick> without any luck :(
Oct 26 15:32:31 <fick> btw: i installed unslung just to make the NSLU a bit more stabil
Oct 26 15:32:43 <blaster8> a bit more stable?
Oct 26 15:32:51 <blaster8> why did you think Unslung would help?
Oct 26 15:32:53 <fick> with the linksys firmware everytime my disk was gone after power off
Oct 26 15:33:18 <fick> well, i tried everything so i didnt have anything to loose anymore
Oct 26 15:33:18 <blaster8> Unslung is the linksys firmware
Oct 26 15:33:46 <fick> i know but still.... after power off i dont loose any data anymore as with the original firmware
Oct 26 15:33:56 <blaster8> how about Linksys technical support?
Oct 26 15:33:59 <blaster8> which drive do you use?
Oct 26 15:34:07 <blaster8> flash/HD
Oct 26 15:34:13 <fick> hitachi HDD
Oct 26 15:34:19 <fick> it works perfectly now
Oct 26 15:34:30 <blaster8> how do you 
Oct 26 15:34:32 <blaster8> know?
Oct 26 15:34:54 <fick> well, i power it off, and on. and the shares are there again
Oct 26 15:35:19 <fick> this problem appears allot with the original firmware it seems
Oct 26 15:35:23 <blaster8> ok
Oct 26 15:35:55 <fick> but theres no real solution, thats why i installed unslung
Oct 26 15:36:46 <fick> this works perfectly, but only the unslinging part inst working too well
Oct 26 15:40:03 <fick> the extra step i tried was this:
Oct 26 15:40:07 <fick> I got the following error when trying to unsling (step 7): 
Oct 26 15:40:07 <fick> Error: /share/hdd/data is not a mounted disk 
Oct 26 15:40:07 <fick> I solved this by doing 
Oct 26 15:40:07 <fick> /bin/mount -t ext3 /dev/sda1 /share/hdd/data 
Oct 26 15:40:07 <fick> After that it was possible to unsling and the NSLU2 did indeed come to life after rebooting. I was using Disk 1 so substitute sd1 with sdb1 if you are using Disk 2. 
Oct 26 15:40:08 <fick>  - Tuk
Oct 26 15:43:20 <fick> so, no luck. i hope that the nslu does his job with this firmware but 'unslinged'
Oct 26 15:44:40 <giallu> I am having problems with a "ipkg install python": lots of messages (errors?) about missing files
Oct 26 15:44:49 <giallu> what could it be?
Oct 26 15:44:55 <giallu> incomplete download?
Oct 26 15:50:28 <richiefrich> ok i cant start nfs on the nslu2 cause im missing modules 
Oct 26 15:50:45 <richiefrich> is there a place for me to get them since i cant seem to build a kernel
Oct 26 15:50:49 <richiefrich> that boots
Oct 26 15:55:14 <fick> plz noone with help on unslinging a disk?
Oct 26 17:20:07 <fick> laters all, bye
Oct 26 18:04:42 <Lunar_Lamp> hello there :-)
Oct 26 18:04:57 <Lunar_Lamp> I have a question about Miau
Oct 26 18:05:10 <Lunar_Lamp> I currently have it set up as my BNC and it works great.
Oct 26 18:05:21 <Lunar_Lamp> How do I enable another user to use it?
Oct 26 18:05:46 <Lunar_Lamp> i.e. create two accounts for miau?
Oct 26 18:14:59 <Lunar_Lamp> I want to add a new user to my slug, but i want very restricted access
Oct 26 18:15:09 <Lunar_Lamp> I only want them to be able to access files in their home directory
Oct 26 18:15:26 <Lunar_Lamp> (i.e. i don't want them to be able to write/read anywhere else)
Oct 26 18:15:31 <Lunar_Lamp> How do I set that up?
Oct 26 18:32:59 <EvilDevil> Lunar_Lamp, google for jailroot or something
Oct 26 18:34:09 <Lunar_Lamp> can i set that up on the slug though? :-/
Oct 26 18:35:01 <EvilDevil> i'm not sure about unslung, but it should at least work on open/debianslug
Oct 26 18:35:11 <Lunar_Lamp> I have unslung :-/
Oct 26 18:35:41 <Lunar_Lamp> It's been rock solid for me so far and i'm 300miles away from my slug, so don't *really* want to mess around with unless i have to, hehe
Oct 26 18:41:44 <EvilDevil> http://chrootssh.sourceforge.net/
Oct 26 18:44:31 <EvilDevil> http://www.debian.org/doc/manuals/securing-debian-howto/ch4.en.html#s-user-restrict
Oct 26 18:46:01 <Lunar_Lamp> EvilDevil, thanks :-)
Oct 26 18:47:42 <caplink811-log> Lunar_Lamp, about your miau question, miau is designed as personal bouncer, each user could start miau with his own conf file and logdir, as default is the logdir ~/.miau and the conf file ~/.miaurc (afair)
Oct 26 18:48:33 <Lunar_Lamp> caplink811-log, i asked in #miau and they said that i would just need to spawn a second instance with "miau -d /path/to/dir/containing/second/miauconf"
Oct 26 18:48:50 <caplink811-log> this should work too
Oct 26 19:45:19 <nkuttler> there are no libfoo-dev packages in unslung, or am i missing something? do i need to build all dependencies?
Oct 26 19:49:25 <caplink811_log> nkuttler, what do you want do?
Oct 26 19:49:38 <nkuttler> caplink811_log: build rtorrent
Oct 26 19:50:15 <caplink811_log> in the optware build environment (native/cross)?
Oct 26 19:50:56 <nkuttler> i installed the crosstool-native package
Oct 26 19:51:00 <nkuttler> and make etc.
Oct 26 19:53:17 <caplink811_log> but you didn't use the optware rtorrent.make file?
Oct 26 19:53:29 <nkuttler> hm, i guess i will look into this optware thing...
Oct 26 20:14:23 <CieD> anyone suggest why I can't connect to my slug after rebooting post bootstrap installation?
Oct 27 01:18:26 <DrJ> I know this may not be the right place
Oct 27 01:18:45 <DrJ> but I need a way to, using ipkg, find out if a package is installed
Oct 27 01:18:51 <DrJ> for a script
**** ENDING LOGGING AT Fri Oct 27 02:59:57 2006