**** BEGIN LOGGING AT Fri Jan 26 02:59:59 2007
Jan 26 03:34:02 <voy74656> hi all! any1 got any ideas why sluf will only recognise 1 ext3 drive? have 3 sata seagate drives connected 2 usb hub but slug only reads 1 of em
Jan 26 03:34:13 <voy74656> they all read fine individually but not all together
Jan 26 03:34:40 <voy74656> previously had em all connected under ntfs and no problems except for performance issues - now on ext3 i got teh performance issues but cant read em all >.<
Jan 26 03:35:45 <voy74656> oh - im running V2.3R63-uNSLUng-6.8-beta
Jan 26 03:36:02 <voy74656> if any1 has a minute to give a few pointers - much appreciated
Jan 26 03:48:32 <mwester-laptop> voy74656: The wiki is a good resource on this.  Basically, natively-formatted ext3 disks are only fully-supported and automatically recognized when directly connected to USB 1 and USB 2 - no hubs allowed.  
Jan 26 03:50:08 <mwester-laptop> This is a limitation of the Linksys firmware.  If you wish to use ext3 disks on a hub, you must mount the disks yourself, and work out a means to share them via Samba if you wish to see them on the network.
Jan 26 04:15:17 <voy74656> really? dang! thanks for the info mwester!!!
Jan 26 09:01:21 <daddy_cool> got a problem flasing my slug with unslung 6.8 - its been flashing for >15hrs!
Jan 26 09:09:01 <daddy_cool> and still going!
Jan 26 09:53:27 <daddy_cool> anybody help - i started flashing my slug with unlung 6.8 over 17hrs ago and it still hasn't finished - what should i do?
Jan 26 10:06:42 <jelle_> something is wrong. how did you flash it?
Jan 26 10:06:47 <jelle_> oh. too late
Jan 26 14:16:21 <daddy_cool> I'm having a problem flashing my slug with unslung 6.8 - anybody assist?
Jan 26 14:34:49 <jelle_> daddy_cool: talk...
Jan 26 14:34:59 <jelle_> how did you flash it?
Jan 26 14:35:14 <jelle_> webinterface or util or ??
Jan 26 14:35:27 <daddy_cool> i followed the instructions in the readme about 22 hrs ago and its still trying!
Jan 26 14:35:59 <daddy_cool> via the linksys web i/f
Jan 26 14:36:04 <jelle_> flashing doesn;t take more than 5 minutes
Jan 26 14:36:17 <jelle_> do you have a windows client?
Jan 26 14:36:24 <daddy_cool> yes
Jan 26 14:37:26 <jelle_> get the upgrade utility, flash the device with that (following instructions on the wki)
Jan 26 14:37:57 <jelle_> sercomm
Jan 26 14:38:12 <daddy_cool> so if i pull the plug now what am i left with? can i still use the upgrade utility?
Jan 26 14:38:24 <jelle_> yes, usually
Jan 26 14:38:45 <daddy_cool> ok - i did make sure i could get into redboot before i started
Jan 26 14:38:50 <jelle_> it is not easy to kill the "load new flash" part...
Jan 26 14:39:03 <jelle_> either way, it is not working now.
Jan 26 14:39:13 <jelle_> so you should do something.
Jan 26 14:39:14 <daddy_cool> ok - i'll give it a try - thanks
Jan 26 14:39:39 <jelle_> go for it. check the "HowTo/RecoverFromABadFlash" wiki
Jan 26 14:39:58 <daddy_cool> thanks i'll try and let you know how i get on
Jan 26 14:40:56 <jelle_> ok
Jan 26 14:43:43 <jelle> arp -a
Jan 26 14:43:49 <jelle> tsk. sorry
**** ENDING LOGGING AT Sat Jan 27 02:59:58 2007