**** BEGIN LOGGING AT Fri Mar 16 02:59:57 2007
Mar 16 09:25:15 <Hamish> good morning *sips hot coffee*
Mar 16 13:46:31 <Naib> I'm about to start install debian-RC2 (after running openslug for some time)
Mar 16 13:46:49 <Naib> when this is installed, AND debian file is released do I have to re-install?
Mar 16 13:46:56 <Naib> stoopid question I know
Mar 16 13:47:21 <fraco> you can upgrade it with apt
Mar 16 13:47:24 <fraco> just like debian
Mar 16 13:47:29 <fraco> even the flash image now
Mar 16 13:47:40 <Naib> sweet!
Mar 16 13:47:41 <fraco> if that is what you are asking
Mar 16 13:47:52 <Naib> gonna copy me 40gig off the HD and flash now then
Mar 16 13:47:54 <fraco> make sure you follow the upgrade instructions
Mar 16 13:47:57 <fraco> on the wiki
Mar 16 13:48:14 <jelle_> eh, where can I find what OpenSlug firmware I flased?
Mar 16 13:48:17 <fraco> i had trouble with the network there is a note on that
Mar 16 13:48:46 <Naib> jelle_, should be in uname -a
Mar 16 13:49:31 <jelle_> it tells me linux 2.6.16, but not whch firmware that was...
Mar 16 13:49:43 <Naib> fraco, just read over the update proceadure and it says put it into upgrade mode, but they talk about the 10sec of power button
Mar 16 13:50:01 <Naib> does the other method still work?
Mar 16 13:50:08 <fraco> other method?
Mar 16 13:50:12 <fraco> i used the power button
Mar 16 13:50:47 <jelle_> (I think it was probably OpenSlug 3.1, I'll settle for that)
Mar 16 13:51:09 <Naib> fraco, hang on ill find my personal install notes
Mar 16 13:51:17 <Naib> its all abt routes and interupts
Mar 16 13:51:35 <Naib> I find it easier since NSLU2 understairs and PC upstairs
Mar 16 13:55:54 <Naib> route add 192.168.0.1 eth0
Mar 16 13:56:02 <Naib> arping  -f 192.168.0.1; telnet 192.168.0.1 9000
Mar 16 13:56:14 <Naib> then press CTRL-C at the right point to break the bot
Mar 16 13:56:17 <Naib> boot*
Mar 16 13:56:31 <Naib> basically catchs redboots 2sec telnet access
Mar 16 13:58:06 <fraco> nah it got simpler
Mar 16 13:58:31 <fraco> something like (from memory): boot and hold reset button until blinking light
Mar 16 13:58:36 <fraco> start upslug
Mar 16 13:58:40 <fraco> simple
Mar 16 14:19:22 <Naib> Eeks!!! there seems to be a hole in my ext3 data partition!!!!
Mar 16 14:19:34 <Naib> hopefully my tar archive of my data is valid!!!
Mar 16 14:21:38 <Naib> SHITE!!! filesystem screwed!
Mar 16 15:45:48 <Hamish> Hello!
Mar 16 15:46:11 <Hamish> I am setting op the cross-compile env. in Debian, and so far so good.
Mar 16 15:46:38 <Hamish> the 'make slugobe-image' start of good, but end in an error
Mar 16 15:46:45 <Hamish> anyone care to help me out?
Mar 16 15:58:13 <joshin> what is the  error?
Mar 16 15:58:54 <joshin> and you might want to move this conversation to #nslu2-linux...
Mar 16 15:59:35 <Hamish> ah, ok.. well it said something about a transitional script for git
Mar 16 15:59:47 <Hamish> I'll check out nslu2-linux
Mar 16 16:00:01 <joshin> it is the dev channel...  :)
Mar 16 16:00:08 <Hamish> ah, thanks, 
Mar 16 16:00:23 <Hamish> I am using the nslu2 channels for the first time.
Mar 16 16:00:28 <joshin> see you there (with devs far smarter than me)
Mar 16 16:00:44 <joshin> welcome!
Mar 16 16:00:56 <Hamish> thanks for the welcome ;)
Mar 16 18:19:13 <iwo> hey, does anyone know how i can check the cpu usage (load) on my slug?
Mar 16 18:19:40 <joshin> from a command line type "uptime" or "top"
Mar 16 18:29:23 <iwo> thanks joshin 
Mar 16 20:20:39 <ildocteur> Hi all. I'm looking to buy a NAS box for home use - and would like to find one that has an active open source firmware comunity. Could any give some recomandations ?
Mar 16 20:20:51 <Reedy_Boy> :/
Mar 16 20:21:15 <Reedy_Boy> The NSLU2 community can be viewed as active
Mar 16 20:21:49 <Reedy_Boy> apt-get dist-upgrade wont upgrade my RC1 debian/NSLU2 to RC2
Mar 16 20:21:51 <Reedy_Boy> :(
Mar 16 20:22:50 <ildocteur> does the NSLU2 firmware only support the Synology NAS' or does any clones exist that will alsorun the FW ?
Mar 16 20:43:35 <Reedy_Boy> Doesnt http://www.nslu2-linux.org/ explain most of it?
Mar 16 20:43:46 <Reedy_Boy> Synology DS-101(g+) 
Mar 16 20:43:50 <Reedy_Boy> Iomega NAS 100d 
Mar 16 20:43:53 <Reedy_Boy> D-Link DSM-G600 
Mar 16 20:43:56 <Reedy_Boy> Freecom FSG-3 
Mar 16 20:43:57 <Reedy_Boy> Qnap TurboStation 
Mar 16 20:43:57 <Reedy_Boy> Iomega StorCenter 
Mar 16 20:43:57 <Reedy_Boy> Puppy Topfield Access 
Mar 16 20:44:13 <Reedy_Boy> "The Iomega NAS 100d is very similar hardwarewise to a Rev 2.2 Synology DS101 except it has a mini-PCI slot with a 802.11g Atheros WiFi card. "
Mar 16 20:57:03 <Reedy_Boy> hmmm the routes are messed up on my debian slug...
Mar 16 22:39:26 <joshin> Reedy_Boy: buy your slug a GPS
Mar 16 22:39:42 <Reedy_Boy> Haha
Mar 16 22:40:03 <joshin> At least it can't get too lost too fast.
Mar 16 22:40:53 * joshin still needs to pick up some yellow spray paint so he can paint his slugs...
Mar 16 22:44:00 <Reedy_Boy> I want a debian sticker for my debian slug...
Mar 16 22:44:01 <Reedy_Boy> hmm
Mar 16 22:44:06 * Reedy_Boy loads ebay
Mar 16 22:44:46 * joshin went to UC Santa Cruz which has the bright yellow "banana slug" as its mascot.  :)
Mar 16 22:45:37 <Reedy_Boy> oooh
Mar 16 22:45:41 <kapookee> I took a couple thorns off of a rose bush and stuck them on my slug to make horns (slug's name is psycho :)
Mar 16 22:45:48 <Reedy_Boy> :D
Mar 16 22:46:12 <Reedy_Boy> i want to move my debian slug to RC2...
Mar 16 22:46:21 <Reedy_Boy> not sure what to do, cant find any specific instrutions
Mar 16 22:46:48 <joshin> Can't help you.  I run Gentoo on my "production" slug.
Mar 16 22:47:20 <joshin> My other one runs ordinary slugosbe and I have a Gentoo chroot (for building packages for the other one)
Mar 16 22:47:26 <kapookee> Hmmm.. customized slug skins ?  :-D
Mar 16 22:48:02 <joshin> Maybe I could get a shiny translucent ethernet cable...  Slug trails...
Mar 16 22:50:34 <kapookee> Reedy_Boy: was it you that tried dist-upgrade to move RC1 -> RC2 (thought I saw it in a log)?
Mar 16 22:51:01 <Reedy_Boy> yeah i did, it didnt do anything even after i sorted the routes
Mar 16 22:51:06 <kapookee> k
Mar 16 22:51:17 <Reedy_Boy> i didnt try it again after a restart
Mar 16 23:12:40 <Reedy_Boy> Nope, dist-upgrade doesnt do anything
Mar 16 23:14:56 <Reedy_Boy> :(
Mar 16 23:18:31 <kapookee> Well, you saved me from the effort.  }:-)
Mar 16 23:37:13 <Reedy_Boy> kapookee: ?
Mar 16 23:38:12 <kapookee> yea?
Mar 16 23:39:54 <Reedy_Boy> <kapookee> Well, you saved me from the effort.  }:-)
Mar 16 23:39:58 <Reedy_Boy> Whatya mean?
Mar 16 23:40:50 <kapookee> oh, sorry.  Meant I was going to try the same thing you did so see if it would work.
Mar 16 23:41:45 <Reedy_Boy> ooh
Mar 16 23:41:47 <Reedy_Boy> lol
Mar 16 23:42:01 <Reedy_Boy> i did manually update my kernel before, but that was quite a bit before RC2 release
Mar 16 23:44:36 <Reedy_Boy> Hmmm
Mar 16 23:47:46 <kapookee> I could try the same thing here.  The debianslug I have is "non-essential".  Just for kicks - I don't care if it gets grundged. :-)
Mar 16 23:48:49 <Reedy_Boy> yeah
Mar 16 23:48:53 <Reedy_Boy> mines not used for much
Mar 16 23:49:03 <Reedy_Boy> as long as it doesnt get bricked
Mar 16 23:49:06 <Reedy_Boy> i dont care too much
Mar 16 23:53:10 <kapookee> I have 5 slugs.  1 - stock Linksys;  1 - Unslung; 2 - slugosle; and 1 - debianslug (which I don't use - prefer slugosle)
Mar 16 23:54:26 <kapookee> call it a weakness.  :-)
Mar 16 23:55:00 <kapookee> runnign dist-upgrade now
Mar 16 23:56:21 <kapookee> *running
Mar 16 23:57:18 <Reedy_Boy> k
Mar 16 23:57:29 <Reedy_Boy> it could be the mirror mine uses...?
Mar 16 23:57:42 <Reedy_Boy> or is RC2 just a major upgrade that needs doing manually
Mar 16 23:58:58 <Reedy_Boy> > > > [ If you have already installed Debian on your slug, you do
Mar 16 23:58:58 <Reedy_Boy> _not_ need
Mar 16 23:58:58 <Reedy_Boy> > > > to reinstall with RC2. You will receive all changes automatically
Mar 16 23:58:58 <Reedy_Boy> > > > when you do: apt-get update ; apt-get dist-upgrade ]
Mar 16 23:59:01 <Reedy_Boy> http://tech.groups.yahoo.com/group/nslu2-linux/message/18187
Mar 17 00:01:53 <kapookee> rebooting (for the hell of it).
Mar 17 00:06:46 <kapookee> okay - I'm having a small brain fart here.  How can I tell if RC2 was isntalled?
Mar 17 00:09:12 <Reedy_Boy> shrugs
Mar 17 00:09:16 <Reedy_Boy> when did you isntall it?
Mar 17 00:09:25 <Reedy_Boy> cat /proc/version
Mar 17 00:10:31 <kapookee> uh, did 'apt-get dist-upgrade', rebooted, everything okay.
Mar 17 00:10:44 <kapookee> cat /proc/version -> Linux version 2.6.20 (sls@scar) (gcc version 4.1.1) #1 PREEMPT Wed Feb 28 18:38:37 EST 2007
Mar 17 00:10:46 <Reedy_Boy> did it do any upgrade on apt-get dist-upgrade
Mar 17 00:11:09 <Reedy_Boy> SLUG:~# cat /proc/version
Mar 17 00:11:10 <Reedy_Boy> Linux version 2.6.18-4-ixp4xx (Debian 2.6.18.dfsg.1-11) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Thu Feb 22 14:00:55 UTC 2007
Mar 17 00:14:44 <Reedy_Boy> I've just posted on nslu2-linux
Mar 17 00:15:10 <kapookee> k
Mar 17 00:15:30 <Reedy_Boy> see if anyone has any ideas
Mar 17 00:17:23 <Reedy_Boy> im off cyaa
Mar 17 00:17:33 <kapookee> godspeed.
Mar 17 00:17:45 <Reedy_Boy> heh
Mar 17 00:17:49 <Reedy_Boy> thats a british saying
Mar 17 00:18:11 <Reedy_Boy> cyaa
Mar 17 00:18:14 <kapookee> bye
Mar 17 00:57:53 <kapookee> Reedy_Boy:  major screw-up on my end.  I posted the /proc/version from a wrong slug...  should've posted...
Mar 17 00:57:56 <kapookee> Linux version 2.6.18-4-ixp4xx (Debian 2.6.18.dfsg.1-11) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Thu Feb 22 14:00:55 UTC 2007
Mar 17 00:58:30 <kapookee> Looks like I'm in the same boat as you. 
Mar 17 01:02:08 <iobound2> hi, is anyone using clamav on debian nslu2 ?
Mar 17 01:02:26 <iobound2> it runs extremely slow (60+ seconds scanning eicar.com), and also it fails to find eicar.com inside .zip files. any ideas?
**** ENDING LOGGING AT Sat Mar 17 02:59:56 2007