**** BEGIN LOGGING AT Sun Jul 15 02:59:57 2007
Jul 15 15:36:29 <McSalty> hi, how can i see that my slug uses my memory stick as swap space and root file system?
Jul 15 15:45:29 <mwester> what firmware and version?
Jul 15 15:45:46 <mwester> Usually it can be deciphered using the "mount" command.
Jul 15 15:46:23 <mwester> or cat /proc/mounts and cat /proc/swaps
Jul 15 15:48:25 <McSalty> this is the output from /proc/mounts rootfs / rootfs rw 0 0
Jul 15 15:48:25 <McSalty> /dev/root /initrd jffs2 ro 0 0
Jul 15 15:48:25 <McSalty> /dev/sda1 / ext3 rw,noatime,data=ordered 0 0
Jul 15 15:48:25 <McSalty> proc /proc proc rw 0 0
Jul 15 15:48:25 <McSalty> sysfs /sys sysfs rw 0 0
Jul 15 15:48:26 <McSalty> /dev/sda1 /dev/.static/dev ext3 rw,noatime,data=ordered 0 0
Jul 15 15:48:28 <McSalty> tmpfs /dev tmpfs rw 0 0
Jul 15 15:48:30 <McSalty> /dev/sda3 /home ext3 rw,data=ordered 0 0
Jul 15 15:48:32 <McSalty> tmpfs /media/ram tmpfs rw 0 0
Jul 15 15:48:34 <McSalty> usbfs /proc/bus/usb usbfs rw 0 0
Jul 15 15:48:36 <McSalty> devpts /dev/pts devpts rw 0 0
Jul 15 15:49:32 <mwester> ---> /dev/sda1 / ext3 rw,noatime,data=ordered 0 0
Jul 15 15:49:50 <mwester> Your root is on /dev/sda1, it's set up as it normally would for a flash device.
Jul 15 15:50:26 <McSalty> ok thanks
Jul 15 17:32:16 <StylusEater> I erased my sysconf area and entered upgrade mode, but upslug2 cannot find any devices in upgrade mode... and arp reveals 192.168.0.1 but it doesn't have a MAC address associated with it...
Jul 15 17:35:33 <StylusEater> I know the MAC address and I'm doing an upslug2 --image --device right now... shows a lot of traffic on the interface but the screen does not show the device is actually flashing
Jul 15 17:39:06 <StylusEater> I see on the redboot screen after typing 'upgrade' a bunch of the following scrolling by: download: GET_VERSION_INFO
Jul 15 17:47:03 <StylusEater> anyone have an idea?
Jul 15 18:03:45 <StylusEater> the HW address is incomplete on an arp
Jul 15 18:29:10 <StylusEater_Work> I got my device to show up in the arp table in upgrade mode, but upslug2 still says it cannot find any devices in upgrade mode ... any ideas?
**** ENDING LOGGING AT Mon Jul 16 02:59:58 2007