**** BEGIN LOGGING AT Wed Jul 25 02:59:57 2007 Jul 25 05:24:51 bry Jul 25 05:25:14 ops wrong # :) Jul 25 09:38:41 aloha uncle remus Jul 25 09:38:46 it means both hello and goodbye Jul 25 10:01:44 :) Jul 25 13:55:46 hello Jul 25 13:56:08 I'm attempting to install debian on the slug Jul 25 13:56:42 I used upslug2 to install the debian image successfully Jul 25 13:56:56 I then turned it off and connected to my wan dhcp box Jul 25 13:57:11 I can see it gets assigned an address . but I can't ssh to it Jul 25 13:57:27 .. it says 'No route to host' Jul 25 13:57:39 You're using the correct IP? Jul 25 13:57:41 Can you ping it? Jul 25 13:57:48 why would this be? everythings on 192.168.1.* Jul 25 13:57:52 no can't ping either Jul 25 13:58:16 How long since you turned it on? Jul 25 13:58:25 I hear the 4 beeps to indicate it's up Jul 25 13:58:44 and I can checke the list of hdcp assigned adrresses before and after I turn it on. Jul 25 13:58:55 so I know it's asking and getting the address Jul 25 13:59:00 3 beeps sorry Jul 25 13:59:36 I turned it off after flashing to move it. Jul 25 13:59:39 is that ok? Jul 25 14:02:23 I connected ok once to installer@ssh but aborted since I wanted to move it an address where it would be able to connect to the 'net Jul 25 14:03:12 hrm. it's getting an address but its not in the dhcp box's arp cache Jul 25 14:03:14 Hmm Jul 25 14:03:18 I'm not sure actually. Jul 25 14:03:26 I have a vague recollection that sounds wrong. Jul 25 14:05:02 well gotta go to bed. but would be grateful for any ideas Jul 25 14:05:06 one last thing Jul 25 14:07:29 is there anything to recommend using slugos vs debian? Jul 25 14:07:41 debian I presume would have more packages Jul 25 14:07:55 but what has slugos got in its favour? Jul 25 14:10:43 mlh_ boot debian with standard ip .77 connect through ssh kill installer do ifconfig eth0 new_ip up , connect to slug with new ip ;), dhcp is quite broken i think Jul 25 14:11:07 ok I'll try that Jul 25 14:12:03 here goes Jul 25 14:12:28 can I just leave it at 1.77 while installing? Jul 25 14:12:41 hmm Jul 25 14:13:12 do u have internet acces from 192.168.1.x subnet ? Jul 25 14:14:53 yes Jul 25 14:15:09 so u can leave it Jul 25 14:16:17 thought so Jul 25 14:16:38 i just need to set the gateway machine as default route Jul 25 14:17:15 no bbeps :-( ... just oragne rady/status Jul 25 14:17:19 wait... Jul 25 14:17:32 very slow Jul 25 14:17:49 er. it;s gone back to just orange Jul 25 14:18:07 and no beeps ? Jul 25 14:18:14 none Jul 25 14:18:35 it just cycled green through the lights a bit but now back to single orange Jul 25 14:18:52 hmm maybe u have to reflash slug.. Jul 25 14:19:50 yer Jul 25 14:19:52 bugger Jul 25 14:20:28 debian should boot to 1.77 though, I presume? Jul 25 14:20:46 yes... should... Jul 25 14:21:00 hmm just beeped 3 times Jul 25 14:21:11 but only orange ready/status Jul 25 14:22:05 hm Jul 25 14:22:54 i don't remember if leds work with installer, try connect to .1.77 Jul 25 14:23:34 I did, still 'no route to host' Jul 25 14:24:06 I'm starting again with it plugged in to thet net to see what the leds do Jul 25 14:26:05 it has orange ready/status after the 3 beeps Jul 25 14:26:12 will try again unplugged Jul 25 14:27:02 I think it takes a LONG time for the dhcp to time out Jul 25 14:27:28 after beeps slug should be ready to use Jul 25 14:30:02 that time the beeps seemed to come quicker Jul 25 14:34:22 check maybe your slug gets ip from dhcp Jul 25 14:34:30 it wasn't work for me Jul 25 14:34:44 i'm gettign beeps now Jul 25 14:34:52 and ssh is not get 'no route' Jul 25 14:35:09 but it's taking a very long time connect or start the installer Jul 25 14:35:15 just nothing so Jul 25 14:35:17 so far Jul 25 14:36:18 I'm very sure it DID get ip from dhcp Jul 25 14:36:27 but I still couldn't connect. Jul 25 14:36:39 maybe... scan network Jul 25 14:39:12 I presume a problem with the route on the slug or maybe Jul 25 14:39:20 I'm tcpdumping now Jul 25 14:39:26 I can see replies from the slug Jul 25 14:39:47 but the ssh is not progressing Jul 25 14:40:21 btw, at what point do I put the usb storage in Jul 25 14:40:25 ... Jul 25 14:40:34 hmm Jul 25 14:40:49 maybe aI'lll give up on the installer and just download the prepared image Jul 25 14:40:58 before installer start hdd detecting ?:P Jul 25 14:41:05 tcpdump is showing arp problems Jul 25 14:41:14 00:39:11.240890 arp who-has 192.168.1.77 tell 192.168.1.12 Jul 25 14:41:22 00:39:11.241108 arp reply 192.168.1.77 is-at 00:14:bf:68:98:92 (oui Unknown) Jul 25 14:41:39 1.12 is this machine Jul 25 14:43:23 i think it's taking so long to reply that my firewall thinks it;s not part of the same tcp session Jul 25 14:45:36 turn off firewall ? Jul 25 14:51:44 I've just tried that. ... no go Jul 25 14:51:54 now I' getting replies Jul 25 14:52:04 just seeing arp requiests Jul 25 14:52:14 thats enough for tonight Jul 25 14:52:17 thanks for your help Jul 25 14:54:23 hm I can ping it now Jul 25 14:55:32 o :) Jul 25 14:55:40 and what with ssh ? Jul 25 14:55:43 but no ssh reply Jul 25 14:55:58 uhm :/ Jul 25 14:56:01 strange Jul 25 14:57:27 I can netcat to port 22 and see the ssh identification! Jul 25 14:57:36 but ssh'ing to it does nothing! Jul 25 14:57:49 SSH-2.0-OpenSSH_4.3p2 Debian-9 Jul 25 14:57:52 weird Jul 25 15:00:13 * mlh sleeps Jul 25 21:17:01 x1205 0-006f: hctosys: invalid date/time Jul 25 21:17:07 sure sign of a burnt x1205? :) Jul 25 21:24:56 seems to be a little bit less information Jul 25 21:25:29 all I get in syslog Jul 25 21:25:38 unfortunately openwrt has no hwclock yet by default Jul 25 21:25:48 I'll build one tomorrow I guess Jul 25 21:28:00 k, may be that openwrt issues has a better auditorium in #nslu2-linux (rod isn't around here) Jul 25 21:29:21 correct, but my question was about a hardware issue. burning the x1205 while tapping i2c lines ;) Jul 25 21:29:27 I guess the first time SMD is always the hardest hrhr Jul 25 21:31:47 myself knowing were the hot end of a soldering iron is, but i'm not a hardware guy at all ;) **** ENDING LOGGING AT Thu Jul 26 02:59:56 2007