**** BEGIN LOGGING AT Sat Mar 01 10:59:57 2008
Mar 01 12:39:44 <PPmarcel> hello
Mar 01 12:40:16 <PPmarcel> does someone remember if i we can install unslung from linksys firmware's gui?
Mar 01 12:42:39 <drif> PPmarcel: original linksys firmware?
Mar 01 12:43:58 <osas> http://www.nslu2-linux.org/wiki/HowTo/UseTheResetButtonToEnterUpgradeMode
Mar 01 12:44:11 <osas> this is the recommended way
Mar 01 12:44:31 <drif> although gui upgrade works also
Mar 01 12:47:48 <PPmarcel> ok
Mar 01 12:49:00 <PPmarcel> and with gui mode, i just have to upload unslung, with one file, i reboot the slug and i have unslung working?
Mar 01 12:49:03 <PPmarcel> i don't remember
Mar 01 12:49:11 <drif> in either way remember to have nothing attached while flashing
Mar 01 12:49:24 <drif> hehe, except rj45 of course..
Mar 01 12:55:24 <PPmarcel> ^^ of course
Mar 01 12:56:10 <PPmarcel> i'm writing a tutorial for begineers, so i want to stay in "easy to do"
Mar 01 14:07:12 <yaustar> QUick question. I am looking to install OpenWRT on my slug and just wanted to know if it was possible to install rtorrent on it in the internal flash?
Mar 01 14:10:14 <PPmarcel> yaustar: you don't intend to use a hard disk drive or a usb key?
Mar 01 14:10:29 <yaustar> I do but not for unslinging
Mar 01 14:10:44 <PPmarcel> maybe it is possible, but you should look to #openwrt
Mar 01 14:10:55 <yaustar> Cheers
Mar 01 14:10:59 <PPmarcel> :)
Mar 01 14:11:03 <PPmarcel> good luck
Mar 01 15:16:40 <PPmarcel> i can't log me in my unslung
Mar 01 15:16:53 <PPmarcel> i tryed root and uNSLUng, but it don't works
Mar 01 15:17:05 <PPmarcel> any idea?
Mar 01 15:18:42 <drif> you mean when not connecting any drives while booting?
Mar 01 15:18:51 <PPmarcel> yes
Mar 01 15:19:07 <PPmarcel> i can access to the webmin, but i can't go in administration or telnet
Mar 01 15:19:25 <PPmarcel> it require the passowrd, and uNSLUng don't works
Mar 01 15:22:43 <mwester> PPmarcel:  Use the password you set when you originally unslung the device.
Mar 01 15:24:04 <PPmarcel> mwester: i was on debian, this password can't works
Mar 01 15:24:43 <PPmarcel> and i have no disk plugged
Mar 01 15:24:51 <mwester> So you just flashed the new image and have not yet unslung it?
Mar 01 15:25:22 <PPmarcel> if by unslunging you mean copied unslung on a usbdisk, i answer no
Mar 01 15:25:42 <PPmarcel> i just flahed the device, and now i try to begin this state :)
Mar 01 15:25:50 <PPmarcel> (unslunging)
Mar 01 15:26:17 <mwester> Ok.  Did you enable telnet, and you have connected to the device with telnet?
Mar 01 15:26:41 <PPmarcel> Unfortunatly not, because i need root password to enbale telnet
Mar 01 15:26:49 <PPmarcel> nable*
Mar 01 15:27:18 <PPmarcel> it is soo weird
Mar 01 15:27:49 <PPmarcel> i'm using unslung 6.10
Mar 01 15:28:03 <PPmarcel> does login/passwd have changed?
Mar 01 15:28:56 <drif> PPmarcel: have you tried admin/admin on web admin page?
Mar 01 15:29:08 <PPmarcel> no :o
Mar 01 15:29:10 <mwester> PPmarcel:  no, you do not need the root password to enable telnet - that is done with admin/admin
Mar 01 15:29:26 <PPmarcel> ow, drif was right
Mar 01 15:29:37 <PPmarcel> i'm confused
Mar 01 15:29:50 <PPmarcel> i thought that i needed root password
Mar 01 15:30:19 <mwester> Unslung is compatible with Linksys; it uses the Linksys login ids where-ever you use the Linksys firmware.
Mar 01 15:30:52 <PPmarcel> never really used it
Mar 01 15:30:54 <mwester> Unslung *adds* (does NOT replace) the Linksys functionality, and part of that is to add telnet, and the ability to log in as root - but that does not replace the use of admin/admin.
Mar 01 15:30:58 <PPmarcel> i nver *
Mar 01 15:31:11 <PPmarcel> ok*
Mar 01 15:32:39 <PPmarcel> thank you
Mar 01 15:50:40 <alezzandro> hi all
Mar 01 15:59:16 <alezzandro> anyone alive? :)
Mar 01 16:01:15 <janne-5011> hi
Mar 01 16:03:19 <PPmarcel> yes
Mar 01 16:05:06 <mwester> No, but many zombies are present.
Mar 01 16:05:43 <PPmarcel> they aren't zombies, they perform your channel ;)
Mar 01 16:15:01 <alezzandro> http://pastebin.com/m29baf647 some errors trying building libsigc++
Mar 01 16:15:25 <alezzandro> libtool: link: `/home/slug/releases/slugos-4.8-beta/nslu2be.tmp/cross/armeb-linux/lib/libstdc++.la' is not a valid libtool archive
Mar 01 16:15:36 <alezzandro> strange refer to this path :|
Mar 01 16:16:33 <alezzandro> my CWD is /home/alex/libsigc.. and my lib dir is /usr/lib
Mar 01 16:18:45 <iwo> hey, my slug isn't requesting an IP address by DHCP (afaik), it's using the default 192.168.1.77
Mar 01 16:18:57 <iwo> i had some problems with the slug recently, related to power supply
Mar 01 16:19:07 <iwo> now all is fixed, apart from the ip address
Mar 01 16:19:18 <iwo> anyone know what i can check to see why dhcp is failing?
Mar 01 16:20:08 <alezzandro> iwo: what's os? slugos?
Mar 01 16:20:16 <iwo> sorry...
Mar 01 16:20:21 <iwo> it's unslung 6.8
Mar 01 16:20:58 <alezzandro> i can't help you, never used unslung
Mar 01 16:21:04 <PPmarcel> iwo: why don't you use a static ip?
Mar 01 16:21:32 <iwo> it's so long ago that i set the slug up, i don't remember how it was getting the ip
Mar 01 16:21:40 <iwo> maybe i did set a static ip
Mar 01 16:21:43 <iwo> (that would be fine)
Mar 01 16:21:47 <iwo> how would i do that?
Mar 01 16:21:54 <PPmarcel> just use  192.168.1.77 :)
Mar 01 16:22:29 <iwo> well, as long as it'll stick and not revert back to 192.168.1.103 when i fix something
Mar 01 16:22:44 <iwo> ...103 was what it was before
Mar 01 16:22:56 <PPmarcel> :o
Mar 01 16:23:08 <iwo> I don't remember how (whether this was just dhcp, or whether i set it up to use a static ip)
Mar 01 16:23:08 <PPmarcel> can you give a static ip from your router?
Mar 01 16:23:34 <iwo> not through my router config i don't think, although i think any client can request a specific ip
Mar 01 16:24:06 <PPmarcel> it request a specific ip only when your device is renewing it
Mar 01 16:24:09 <mwester> iwo: just use the Linksys web gui and change it back to DHCP or static, whichever you want.
Mar 01 16:24:40 <iwo> doh!
Mar 01 16:24:57 <alezzandro> mwester: only you can help me :D http://pastebin.com/m29baf647
Mar 01 16:25:00 <iwo> thanks mwester. I completely forgot that the linksys web gui actually does more than turning on telnet ;)
Mar 01 16:25:20 <PPmarcel> :D
Mar 01 16:26:54 <mwester> alezzandro:  looks like leakage in a package build somewhere.  Search for .pc files that might contain the errant path, and correct them.
Mar 01 16:29:26 <alezzandro> mwester: is possible that libtool generate it on the fly when running: /bin/bash ../libtool --tag=CXX   --mode=link ..etc..?
Mar 01 16:33:46 <mwester> Yes, but it got the path from somewhere.
Mar 01 16:34:14 <mwester> You need to find where that path is coming from, and fix it.  It shouldn't be there, but leakage like this has happened before.
Mar 01 16:53:36 <PPmarcel> i can't unsling my disk. I have a message error which says:
Mar 01 16:54:20 <PPmarcel> "Error: /share/hdd/data does not appear to have benn formatted byt the Linksys formatting utility. Please go to the webinterface, etc"
Mar 01 16:54:41 <PPmarcel> but i have formatted it from webmin twice
Mar 01 16:55:02 <PPmarcel> and when i do ls /share/hdd/data, i have 3 files
Mar 01 16:55:23 <PPmarcel> lost+found, quota.user, and quota.usr~
Mar 01 17:20:22 <PPmarcel> it's ok now
Mar 01 17:23:10 <daveyboy_> grrr new debian dont fix the 2hdd boot problem it seems
Mar 01 17:45:18 <PPmarcel> hwo do you copy files on the hard disk with unslung? i need to use scp all the time?
Mar 01 17:50:01 <janne-5011> copy from the slug ppmarcel+
Mar 01 17:50:12 <janne-5011> *?
Mar 01 17:50:21 <PPmarcel> no, copy to the slub
Mar 01 17:50:24 <PPmarcel> g
Mar 01 17:50:41 <PPmarcel> i must create a samba user which can write on it?
Mar 01 17:51:27 <janne-5011> hm just share and copy .......
Mar 01 17:51:37 <mwester> PPmarcel:  I get the impression you have never used the NSLU2 in the manner which Linksys intended it to be used... ;)
Mar 01 17:51:49 <PPmarcel> mwester: ^^'
Mar 01 17:51:51 <janne-5011> =)
Mar 01 17:52:23 <PPmarcel> i always used sluOG or debian, and today i intend to teach how using the divice
Mar 01 17:52:27 <PPmarcel> device
Mar 01 17:52:35 <PPmarcel> i want to cover unslung aspect too
Mar 01 17:53:07 <PPmarcel> ok i will find by myself anyway
Mar 01 17:53:11 <mwester> It has samba pre-installed and automatically configured with the Linksys firmware -- you should see your hard drive as a network share named "DISK 1" or "DISK 2"
Mar 01 17:53:40 <mwester> (depending on which USB port the drive is plugged into)
Mar 01 17:54:07 <janne-5011> ..and from webinterface/admin you can configure shares folders and so on.
Mar 01 17:54:08 <PPmarcel> (shares are crashing my pc, i need some minutes)
Mar 01 17:54:38 <PPmarcel> well ok
Mar 01 17:54:38 <janne-5011> linksys setup is good=)
Mar 01 17:55:24 <PPmarcel> ^^
Mar 01 17:58:29 <PPmarcel> ah ok, you can write on it
Mar 01 17:59:14 <PPmarcel> i'm used to disable writing, because i'm in a lan
Mar 01 17:59:45 <PPmarcel> i never thought that normal user could write his own files from samba ^^
Mar 01 18:04:13 <janne-5011> i got 2 slugs. same setup. one I cant reach when behind the router.when connect it direct to my pc its no problem. what can i check?
Mar 01 18:04:34 <PPmarcel> it is your router
Mar 01 18:04:53 <janne-5011> as said same setup
Mar 01 18:05:07 <janne-5011> so what setting in router would affect this?
Mar 01 18:05:20 <PPmarcel> 1 slug in pluged on WAN port, the other on LAN ports?
Mar 01 18:05:40 <PPmarcel> the router blocks your network from the outside
Mar 01 18:05:49 <janne-5011> no
Mar 01 18:05:53 <PPmarcel> ah?
Mar 01 18:06:03 <janne-5011> slugs is on lan
Mar 01 18:06:07 <PPmarcel> ah ok, soz
Mar 01 18:06:34 <PPmarcel> so, you can't ping them together?
Mar 01 18:07:25 <PPmarcel> if you use unslung, can you acces to their webmin?
Mar 01 18:08:00 <janne-5011> one works one not
Mar 01 18:08:16 <PPmarcel> are you sure about ips?
Mar 01 18:08:21 <janne-5011> that one dont works , works if i connect it to my pc without router
Mar 01 18:08:39 <PPmarcel> maybe it is networks setting on this slug
Mar 01 18:08:40 <janne-5011> yes i got it connected to my pc now
Mar 01 18:09:00 <janne-5011> i may double check evryting one more time
Mar 01 18:09:05 <PPmarcel> :)
Mar 01 18:09:33 <PPmarcel> check the gateway on your slug conf
Mar 01 18:26:19 <drif> janne-5011: are you sure they aren't sharing same ip?
Mar 01 18:29:24 <janne-5011> nope
Mar 01 18:29:39 <janne-5011> 192 .x .x 106 and 107
Mar 01 18:31:11 <janne-5011> gateway netmask settings is right
Mar 01 18:44:48 <janne-50112994> grrrmbl
Mar 01 18:45:43 <PPmarcel> ssh and ping timout?
Mar 01 18:46:26 <janne-50112994> ping says cant reach
Mar 01 18:47:29 <PPmarcel> have you installed something strange?
Mar 01 18:47:54 <janne-50112994> no its more or less clean install cause i intend to use rtorrent on it
Mar 01 18:48:15 <PPmarcel> and what about samba? (if sambe there is)
Mar 01 18:48:34 <janne-50112994> nothing no share seen no unp..nothing
Mar 01 18:49:03 <PPmarcel> an... ugly problem :/
Mar 01 18:49:19 <janne-50112994> disabled macadess filter to in router
Mar 01 18:49:31 <janne-50112994> ugly=true
Mar 01 18:49:34 <janne-50112994> =)
Mar 01 18:50:58 <PPmarcel> and can you ping it, but from the other slug?
Mar 01 18:51:19 <janne-50112994> i shall check from the other
Mar 01 18:52:43 <janne-50112994> 64 bytes from 192.168.0.107: icmp_seq=0 ttl=64 time=0.7 ms
Mar 01 18:52:43 <janne-50112994> 64 bytes from 192.168.0.107: icmp_seq=1 ttl=64 time=0.6 ms
Mar 01 18:52:45 <janne-50112994> works
Mar 01 18:52:46 <PPmarcel> :D
Mar 01 18:53:32 <janne-50112994> they are connected to same switch
Mar 01 18:53:41 <PPmarcel> and not your computer?
Mar 01 18:53:45 <janne-50112994> no
Mar 01 18:54:08 <PPmarcel> you are hit by the curse-of-the-unreachable-slug :(
Mar 01 18:54:18 <janne-50112994> lol
Mar 01 18:55:16 <PPmarcel> try a traceroute
Mar 01 18:55:32 <PPmarcel> and next, try to ping your slug from your router, if you can
Mar 01 18:55:45 <janne-5011-2> try it
Mar 01 18:56:06 <PPmarcel> i gonna buy food, cu later
Mar 01 18:56:50 <janne-5011-2> cant ping from router,but the other one works
Mar 01 18:56:52 <janne-5011-2> cuĻ
Mar 01 19:43:32 <PPmarcel> janne-5011: it's ok now?
Mar 01 19:44:42 <janne-5011> no. thinking of put it at direct to router for a test.
Mar 01 19:44:53 <PPmarcel> ok
Mar 01 21:03:16 <PPmarcel> good night
Mar 01 23:58:12 <janne-5011> anyone run rtorrent here and having the problem no ratio shows up?
Mar 01 23:58:44 <janne-5011> rtorrent with unslung
Mar 02 02:04:28 <blkhawk> hi
Mar 02 07:16:47 <Sefram_> Does anyone here know if I can use 'Intel IXP400 software - NPE microcode (crypto)' version 2.4 I guess to build from source? What possibilities are there to get this file? Intel mail says access request denied...  
Mar 02 10:00:25 <janne-5011> rtorrent works but dont keep record of  upload and ratio anyone seen the same? unslung..
Mar 02 10:38:59 <blkhawk> lo
**** ENDING LOGGING AT Sun Mar 02 10:59:57 2008