**** BEGIN LOGGING AT Fri Mar 07 10:59:56 2008 Mar 07 14:03:05 downloading openwrt kamikazi for my nslu2; i'm nervous to start :) Mar 07 14:13:34 ^^ Mar 07 14:15:23 AndyGraybeal: Don't worry, in general most devices survive ;) Mar 07 14:16:02 (actually, unless you use the Linksys "eraseall" utility (which you should NEVER do), you can't get it into a state from which you cannot recover. Mar 07 14:16:04 ) Mar 07 14:16:46 yeah Mar 07 14:16:57 i "bricked" my device so often, can't count ^^ Mar 07 14:17:16 but there's always a way back since u don't modify redboot these days Mar 07 14:17:47 nice Mar 07 14:19:24 http://wiki.openwrt.org/OpenWrtDocs/Hardware/Linksys/NSLU2 <-- are these good installation instructions to follow (Scroll down a little) Mar 07 14:19:35 i realize it says 7.06 and not 7.09 Mar 07 14:20:05 or should i get the image from slug-firmware.net ? they are two differnt file sizes Mar 07 14:24:41 openwrt-kamikaze-7.09-nslu2.zip is 1.9MB and openwrt-nslu2-2.6-zImage is 928K Mar 07 14:29:30 AndyGraybeal: I can't say - I don't use openwrt myself. Perhaps someone else might have an answer, but I suspect you'll have to install both and just see what the differences might be. Mar 07 14:30:14 mwester: rad thank you Mar 07 15:45:20 hey everything is up and running! Mar 07 15:45:23 beautiful Mar 07 15:45:41 howdy andy Mar 07 15:46:11 hi drif Mar 07 15:46:54 i gotta head off to work soon.. but i just installed openwrt.. i'm happy it's as easy as it is. Mar 07 15:47:56 I haven't tried it yet - what kind of setup you have? Mar 07 15:48:16 drif, i just got an nslu2 ... this is my first time i turned it on Mar 07 15:48:32 i'm hoping to get asterisk running on it and have voicemail Mar 07 15:49:45 so it's running solely on internal flash? Mar 07 15:50:31 yea so far Mar 07 15:50:58 i'm thinking about getting the novation u727 usb keychain cellular broadband device Mar 07 15:51:08 to run on it Mar 07 15:56:57 installing screen right now! Mar 07 16:01:53 how's the space? Mar 07 16:02:17 careful not to fill it up - or does openwrt carry countermeasures for that? Mar 07 16:06:51 i'm not sure Mar 07 16:07:40 says i've used 39% of the space so far (11788KiB) out of 30472KiB Mar 07 16:07:54 thats only with the image and screen installed Mar 07 16:08:07 i gotta head to work, i'll try to get asterisk on their tonight Mar 07 16:08:46 i am gonna make it work with my linksys spa3102 voip gateway thing Mar 07 16:09:11 then try to get that cellular broadband installed Mar 07 16:09:33 with the novation u727.. i haven't read of anyone doing this yet... i tried to find info on it last night Mar 07 16:12:50 hah... sprinkler control with nslu2 - http://www.uchobby.com/index.php/2007/08/03/sprinkler-control-with-embedded-linux/ Mar 07 16:15:45 http://chezphil.org/slugbee/ <--- wireless sensing Mar 07 16:15:52 so awesome Mar 07 16:26:03 what is the slugos eqvivalent to ipkg unslung-devel to install? Mar 07 17:38:14 hi Mar 07 20:25:06 Hi all it edit wiki dont works. It dont saves.. Mar 07 20:34:42 I can save fine.. it seems.. Mar 07 20:34:46 Just did on the sandbox Mar 07 20:38:04 usually saving does not work if there are unapproved links on the page Mar 07 20:38:21 that's my experience Mar 07 20:38:28 sometimes, but not always Mar 07 20:38:46 thy were going to go to MediaWiki.. Mar 07 20:56:22 hm Mar 07 20:56:34 there is unapproed links Mar 07 20:56:47 *unapproved. Mar 07 20:56:57 who can approve ? anyone here? Mar 07 20:57:37 thoose links are neccesesery. Mar 07 21:53:17 janne-5011: URL ? Mar 07 22:04:47 eno http://www.nslu2-linux.org/wiki/Applications/Aquila Mar 07 22:05:39 approved Mar 07 22:05:40 bbl Mar 07 22:08:25 thanks eno update done=) Mar 08 01:16:08 hello Mar 08 01:16:36 server irc.freenode.net Mar 08 01:20:08 Does anybody know how I use i2c on my NSLU2, running unslung? Mar 08 01:22:10 I tried http://www.staton.us/electronics/open_slug/i2c_interface.html Mar 08 01:23:07 But I have no /dev/i2c-0, or anything that looks like it Mar 08 01:31:06 That was 4 minutes that ymoona waited for an answer, then? Mar 08 01:31:11 Ok... Mar 08 01:58:35 that's ages..man. Mar 08 01:58:43 like Mar 08 01:58:47 :D Mar 08 01:59:52 * drif *counting* Mar 08 02:00:33 I've read the live logs Mar 08 02:02:12 But now I'll try to keep my window open Mar 08 04:02:30 i'm upgrading my slug to kamikaze 7.09 but it's either not booting, or not fetching dhcp adddress after upslug2 copies the new image and reboots it Mar 08 04:03:16 i know this isn't #openwrt or an openwrt main channel... but #openwrt didn't seem to exist when i did a channel list... odd Mar 08 04:04:22 urnotl33t: is the IP address at 192.168.1.77 for the openwrt slug? Mar 08 04:04:51 i tried to ping that but got no reply Mar 08 04:05:38 i put my machine on 192.168.0.10/24 and did nmap ping scan of the whole subnet to see if it was on another IP by chance but nothing came back Mar 08 04:05:57 #openwrt channel seems fine, just "/j #openwrt" Mar 08 04:06:40 it was running another firmware successfully earlier (slugos i think) and it was set to dhcp and i logged into it to verify it functioned. Mar 08 04:06:57 (i'm inheritting this from a friend who wishes to part with it) :) Mar 08 04:07:58 i know it's supposed to take several minutes to flash firmware but it's been 30-ish already :-/ Mar 08 04:08:37 also, i didn't see a "jffs2" image on downloads.openwrt.org, rather only a "squashfs" image. i presume that was sufficient to use? Mar 08 04:08:49 or should i have used something else Mar 08 04:09:20 why not use the image from http://www.slug-firmware.net/ ? Mar 08 04:10:35 oh. i did not know about that. that could be why :) Mar 08 04:12:19 uploading that to the slug now Mar 08 04:14:30 well that's much better Mar 08 04:14:42 eno: j00 r0x0r :) Mar 08 05:05:43 looks like i'm getting hit with the vfat and cp437 missing module issues in this version. argh Mar 08 05:21:59 how 'unstable' is the unstable feed at http://ipkg.nslu2-linux.org/feeds/openwrt/unstable/ ? Mar 08 10:27:29 Hi, quick question I've been trawling through the docs, but can't find whether SquashFS is supported in the kernel. Checked the source tarball for 4.8 and there are various patches for squashfs3.0 and squashfs-tools, is it safe to assume that it is supported? **** ENDING LOGGING AT Sat Mar 08 10:59:56 2008