**** BEGIN LOGGING AT Mon Mar 17 02:59:56 2008
Mar 17 03:15:46 <rexthedog> cant find anything in the wiki..
Mar 17 03:17:03 <rexthedog> ohsorry
Mar 17 03:17:04 <rexthedog> got it#
Mar 17 03:21:36 <rexthedog> hmm doesnt seem to work
Mar 17 03:21:50 <rexthedog> the wiki says to copy /etc/passwd over /share/hdd/conf/passwd
Mar 17 03:21:57 <rexthedog> but i get following error:
Mar 17 03:22:30 <rexthedog> cp /etc/passwd /share/hdd/conf/passwd
Mar 17 03:22:30 <rexthedog> cp: '/etc/passwd' and '/share/hdd/conf/passwd' are the same file
Mar 17 11:08:37 <barnseenio> does anyone stream/smb to a high definition player (or PC) from their NSLU2?
Mar 17 14:38:37 <Arandil> hi there, has anyone experience with netatalk?
Mar 17 14:45:58 <Hagge> Hello, i just tried to update my NSLU2 (Manufactured 07/2007) with SlugOSBE-4.8-beta using upslug2 on OS X - the upgrade went seemingly ok, i let it run until the "Rebooting... done" message, the Ready/Status light started blinking yellow and doesnt stop. Restarting by pulling the plug (only way) gives the blink and i cant get it into redboot mode again either
Mar 17 14:47:16 <Hagge> Tried to look for a solution on the wiki but couldn't find anything mentioning problems to enter the upgrade mode
Mar 17 14:47:25 <Hagge> anyone have an idea?
Mar 17 15:12:49 <barnseenio> anyone use mediatomb on nslu2 w debian?
Mar 17 15:32:16 <barnseenio> or anyone use geexbox/ushare ?
Mar 17 15:32:49 <Hagge> got it working
Mar 17 17:54:03 <asa> hi@all
Mar 17 18:07:04 <asa> @admin: can you set a link in the HowTo Recipes on http://www.nslu2-linux.org/wiki/HowTo/NFSonWindows plz?
Mar 17 18:09:09 <asa> and plz delete http://www.nslu2-linux.org/wiki/Info/NFSonVista
Mar 17 18:28:59 <janne-5011> asa nice screens and all=)
Mar 17 18:30:35 <asa> thx :)
Mar 17 18:31:04 <asa> but i don't have an english version of windows. its all in german :)
Mar 17 18:32:01 <janne-5011> first I droped my ecternal usb at the fllor. then I made a mistake when I run defrag on it. after that i got cyclic redundance erroors. moved away all files and reformated it..can I rely on that disk now?
Mar 17 18:32:22 <janne-5011> a terrible day lol
Mar 17 18:32:30 <asa> hmmm
Mar 17 18:32:59 <asa> you can start a scandisk with full check
Mar 17 18:33:06 <janne-5011> 90 % of the files is safenow
Mar 17 18:33:20 <asa> if the check fails, then don't us it anymore
Mar 17 18:33:26 <janne-5011> scandisc on a empyt disk goes fast?
Mar 17 18:33:33 <janne-5011> *empty
Mar 17 18:33:36 <asa> dou you use win or linux?
Mar 17 18:33:44 <janne-5011> that one is on win
Mar 17 18:34:05 <janne-5011> but its a good idea i do it
Mar 17 18:34:55 <asa> oh
Mar 17 18:35:29 <asa> it's no more scandisk, it's CHKDSK now
Mar 17 18:35:49 <asa> type chkdsk /? in a dos-box
Mar 17 18:35:59 <asa> than you get all te options
Mar 17 18:36:07 <janne-5011> a choosed scandisk full (try to repair and so on. not the fast choice
Mar 17 18:40:42 <asa> you can try Drive Fitness Test
Mar 17 18:40:51 <asa> it's an freeware tool
Mar 17 18:43:01 <janne-5011> scandisk seems take forever
Mar 17 18:43:04 <janne-5011> hm
Mar 17 18:43:19 <asa> shure, it takes a long time
Mar 17 18:43:34 <asa> it writes in every sector and read it 
Mar 17 18:43:49 <asa> do it overnight :)
Mar 17 18:44:46 <janne-5011> yes..maybe 1 % done 11 minutes gone.
Mar 17 18:48:37 <PPmarcel> asa: you talk about nfs wiki?
Mar 17 18:49:10 <PPmarcel> NFSonWindows :)
Mar 17 18:49:27 <PPmarcel> nice tutorial
Mar 17 18:51:18 <asa> now some admin just have to put it in the howto list :)
Mar 17 18:53:49 <PPmarcel> is it possible to emulate arm hardware, in order to install slugos, or more?
Mar 17 18:55:16 <PPmarcel> it seems yes
Mar 17 19:05:02 <asa> PPmarcel: look here http://www.virtera.com/
Mar 17 19:58:56 <ido-> hey
Mar 17 19:59:44 <asa> @admin: can you set a link in the HowTo Recipes on http://www.nslu2-linux.org/wiki/HowTo/NFSonWindows plz?
Mar 17 20:01:21 <ido-> hrm
Mar 17 20:01:26 <ido-> darn it
Mar 17 20:01:48 <ido-> samba stopped again validating windows users
Mar 17 20:02:28 <asa> i've changed to NFS istead of samba
Mar 17 20:02:28 <ido-> or hasn't it
Mar 17 20:02:36 <asa> it's faster
Mar 17 20:02:48 <ido-> yeah, but i've got like 5 computerss running windows here
Mar 17 20:02:56 <asa> so what :)
Mar 17 20:03:10 <asa> http://www.nslu2-linux.org/wiki/HowTo/NFSonWindows
Mar 17 20:23:49 <PPmarcel> ty asa. I think i just should get more routers
Mar 17 20:24:14 <asa> why?
Mar 17 20:24:24 <ido-> eh
Mar 17 20:24:28 <ido-> i'm getting a new router soon.
Mar 17 20:24:36 <PPmarcel> i need it for my blog
Mar 17 20:24:45 <PPmarcel> i describe new free firmwares
Mar 17 20:24:47 <PPmarcel> and tips
Mar 17 20:24:52 <asa> routers for a blog?
Mar 17 20:25:01 <PPmarcel> i will try openwrt soon, and freewrt seems nice too
Mar 17 20:25:10 <PPmarcel> no, a blog for routers :)
Mar 17 20:25:13 <asa> is a server not the better place for a blog? :)
Mar 17 20:25:15 <PPmarcel> and snlu2
Mar 17 20:25:22 <PPmarcel> lol
Mar 17 20:25:51 <ido-> i bought a projector on ebay
Mar 17 20:25:55 <PPmarcel> in fact, i have a blog on tuxfamily, where i talk ABOUT embedded devices (nslu2, routers, modems, ipods, etc)
Mar 17 20:25:58 <ido-> and the stupid guy mail it to the wrong address
Mar 17 20:26:04 <ido-> in another country
Mar 17 20:26:06 <PPmarcel> and free firmwares
Mar 17 20:26:09 <janne-5011> a dir 655 there is a new model from d-ljink so they are cheap now
Mar 17 20:26:15 <janne-5011> *d-link
Mar 17 20:26:25 <alezzandro> PPmarcel: i wanna read it, gimme the link :)
Mar 17 20:26:28 <ido-> now i have to pay for taxes too :<
Mar 17 20:26:38 <PPmarcel> i'm sorry alezzandro but maybe you won't like it :)
Mar 17 20:27:04 <alezzandro> PPmarcel: are you sure? :P let's try :)
Mar 17 20:27:10 <PPmarcel> i think that there are enough english tuto on theses devices, so i wrote my blog in my natal language, french
Mar 17 20:27:17 <asa> i have a IPaq with familiar-linux
Mar 17 20:27:17 <alezzandro> ahhhh
Mar 17 20:27:21 <PPmarcel> sorry :)
Mar 17 20:27:23 <alezzandro> PPmarcel: okok :D
Mar 17 20:27:35 <PPmarcel> maybe later an english version, why not :)
Mar 17 20:27:43 <alezzandro> eheheh
Mar 17 20:28:03 <alezzandro> or in italian? why not? :p
Mar 17 20:28:16 <PPmarcel> i'm not able to write italian ^^^
Mar 17 20:28:17 <PPmarcel> lol
Mar 17 20:28:37 <alezzandro> ehehueaheuah
Mar 17 20:29:13 <alezzandro> if you want I can give you our Soccer World Cup :p
Mar 17 20:29:37 <alezzandro> lol
Mar 17 20:29:48 <PPmarcel> lool
Mar 17 20:30:05 <PPmarcel> i prefer linux stuffs :p
Mar 17 20:30:14 <alezzandro> ehehe
Mar 17 20:30:32 <alezzandro> PPmarcel: did you try linksys wag200g?
Mar 17 20:30:40 <alezzandro> great router
Mar 17 20:31:46 <PPmarcel> yes? i will look at this caract.
Mar 17 20:33:06 <alezzandro> not well support by openwrt, but there are some firmware edits, that permits you to have some linux tools, like dropbear daemon, ftp, and much more :)
Mar 17 20:33:36 <asa> a god choice is te AVM 7170 
Mar 17 20:33:41 <PPmarcel> i see that
Mar 17 20:33:43 <alezzandro> by the way, not much memory, (only 300kb deleting language partition)
Mar 17 20:33:44 <asa> it runs with linux
Mar 17 20:34:16 <alezzandro> (the wag200g is linux based too, 2.4 kernel of course)
Mar 17 20:34:17 <PPmarcel> AVM is soo expensive !
Mar 17 20:34:18 <alezzandro> :)
Mar 17 20:34:34 <PPmarcel> i would like to stay around 50€ - 80 €
Mar 17 20:34:44 <alezzandro> i've payed the linksys wag about 70 euro
Mar 17 20:35:02 <PPmarcel> what do you run on it?
Mar 17 20:35:24 <PPmarcel> i talk about firmware
Mar 17 20:35:39 <alezzandro> a modified firmware
Mar 17 20:35:40 <alezzandro> recompiled by a guy
Mar 17 20:35:54 <alezzandro> wait a moment, i will give you some links
Mar 17 20:35:58 <PPmarcel> ok
Mar 17 20:36:09 <PPmarcel> actually, i have a wrt54gl with tomato
Mar 17 20:36:25 <PPmarcel> maybe i just should keep my wrt for running openwrt
Mar 17 20:37:12 <PPmarcel> you have woytekm firmwarE?
Mar 17 20:37:24 <alezzandro> yeah
Mar 17 20:37:27 <alezzandro> http://www.alexworld.it/index.php?entry=entry080102-222140
Mar 17 20:37:29 <PPmarcel> ok i found it :)
Mar 17 20:37:32 <alezzandro> this is my review
Mar 17 20:37:34 <alezzandro> :)
Mar 17 20:37:53 <alezzandro> in italian, but the links on the article are them :)
Mar 17 20:38:56 <PPmarcel> this router looks nice. How much memory is in it, and what is the core speed?
Mar 17 20:39:28 <ido-> hrm.
Mar 17 20:39:32 <ido-> i'm running openwrt
Mar 17 20:39:40 <ido-> for quite a while now
Mar 17 20:39:49 <PPmarcel> omg alezzandro, what is this laptop? :D
Mar 17 20:39:57 <PPmarcel> your apple one
Mar 17 20:40:05 <alezzandro> :D
Mar 17 20:40:07 <alezzandro> http://pastebin.com/f4ee6d803
Mar 17 20:40:33 <alezzandro> shhh! don't tell that to linux users, they can kick me out from channel :p
Mar 17 20:40:43 <PPmarcel> ido-: can you do everything that you want with openwrt?
Mar 17 20:40:51 <ido-> yeah, pretty much
Mar 17 20:41:23 <PPmarcel> i wonder if i can block people with layer-7?
Mar 17 20:41:29 <PPmarcel> but with X-wrt?
Mar 17 20:41:34 <ido-> not x-wrt
Mar 17 20:41:40 <PPmarcel> only with iptable?
Mar 17 20:41:55 <ido-> especially not kami,since x-wrt isnt complete
Mar 17 20:42:12 <PPmarcel> ok
Mar 17 20:42:24 <PPmarcel> and what about freewrt? is it a mature project?
Mar 17 20:42:44 <alezzandro> PPmarcel: but wrt54gl hasn't integrated adsl modem?
Mar 17 20:42:52 <PPmarcel> alezzandro: i think that i will trty to buy a router with more memory
Mar 17 20:42:58 <PPmarcel> around 32 MB if i can
Mar 17 20:43:09 <PPmarcel> no, it's just a router
Mar 17 20:43:13 <PPmarcel> you hit one point
Mar 17 20:43:17 <alezzandro> ahh okok
Mar 17 20:43:28 <PPmarcel> but i have the adsl2mue, with routerTech on it :D
Mar 17 20:43:41 <PPmarcel> a linsys device
Mar 17 20:43:41 <alezzandro> give me some links :p
Mar 17 20:43:46 <PPmarcel> yes ofc
Mar 17 20:43:52 <asa> buy a router with USB port. than you can use a memmory stick to expand the memory
Mar 17 20:44:25 <PPmarcel> http://www.ciudadwireless.com/images/ADSL2MUE-EUCW.jpg
Mar 17 20:45:04 <alezzandro> wow interesting, but is too fat?? :)
Mar 17 20:45:05 <PPmarcel> the website of routertech, a free firmware for modem-routers (wirless included)
Mar 17 20:45:09 <PPmarcel> http://www.routertech.org/
Mar 17 20:45:19 <PPmarcel> alezzandro: it's the same size than a wrt54g
Mar 17 20:45:45 <PPmarcel> and routertech firmware demo -> http://darkwolf.altervista.org/demo/login.htm
Mar 17 20:45:59 <alezzandro> is it running linux?
Mar 17 20:46:22 <PPmarcel> yes of course
Mar 17 20:46:24 <PPmarcel> it's free :)
Mar 17 20:46:41 <alezzandro> wow
Mar 17 20:46:46 <alezzandro> thanks for links
Mar 17 20:46:59 <PPmarcel> the originial linksys firmware has got a command line interface, i think that it's close than cisco router (or far ;) ) -> http://www.linux-mips.org/wiki/ADSL2MUE#Command_Line_Interface_.28CLI.29
Mar 17 20:47:20 <PPmarcel> alezzandro: it's around 10/15€ expensive ;D
Mar 17 20:47:33 <PPmarcel> it's not built anymore
Mar 17 20:48:36 <PPmarcel> i bought it 15€, and i thought that i made a bad deal, until i discovred routertech, still in devellopement, and it support many last adsl modulations
Mar 17 20:49:05 <PPmarcel> but tbh, this firmware is really close than dlink
Mar 17 20:49:20 <alezzandro> eh
Mar 17 20:49:23 <PPmarcel> my parents have got the 624g, and there is almost the same commands
Mar 17 20:49:38 <alezzandro> damned closed firmwares
Mar 17 20:49:45 <PPmarcel> no, it's on linux too
Mar 17 20:50:02 <alezzandro> i hate dlink :p
Mar 17 20:50:12 <PPmarcel> maybe they started from dlink to program their own firmware
Mar 17 20:50:16 <PPmarcel> hehe :p
Mar 17 20:50:46 <PPmarcel> ah, i found a list of free devices in linksys
Mar 17 20:51:05 <PPmarcel> if i find it again ... 
Mar 17 20:51:21 <ido-> ok
Mar 17 20:51:22 <ido-> damnit
Mar 17 20:51:29 <ido-> i've fed up with samba
Mar 17 20:51:32 <PPmarcel> http://www.linksys.com/servlet/Satellite?c=L_Content_C1&childpagename=US%2FLayout&cid=1115416836002&pagename=Linksys%2FCommon%2FVisitorWrapper
Mar 17 20:51:41 <ido-> i cantget it to work like in unslung
Mar 17 20:52:11 <ido-> can anyone help?
Mar 17 20:52:20 <alezzandro> before taking wag200g, i've tried dlink 624T and I've returned back to Store 2 Models before changing the product with a linksys wag200g :)
Mar 17 20:52:30 <PPmarcel> lol
Mar 17 20:52:44 <PPmarcel> ido-: what?
Mar 17 20:53:07 <ido-> i want it to have a default guest account 
Mar 17 20:53:21 <ido-> and for specific shares, allow user based
Mar 17 20:53:28 <ido-> the user based part seems to work
Mar 17 20:53:34 <ido-> but the default - guest, doesnt
Mar 17 20:53:37 <PPmarcel> you still have permission problems? 
Mar 17 20:53:41 <ido-> it still asks for passwords
Mar 17 20:53:50 <ido-> adunno, could be
Mar 17 20:54:27 <ido-> drwxrwxr-x   12 root administrators 4096 Mar 17 22:27 2watch
Mar 17 20:54:37 <ido-> this is example for my shared directories
Mar 17 20:54:40 <ido-> is this okay ?
Mar 17 20:54:53 <PPmarcel> of course
Mar 17 20:55:39 <ido-> okay
Mar 17 20:55:40 <ido-> what else?
Mar 17 20:55:53 <PPmarcel> we need your smb.conf
Mar 17 20:56:03 <ido-> yeah
Mar 17 20:56:08 <ido-> prepering it as we speak
Mar 17 20:56:12 <PPmarcel> :D
Mar 17 20:57:09 <ido-> oh shit
Mar 17 20:57:15 <ido-> i might know what went wrong
Mar 17 20:57:16 <ido-> sec
Mar 17 20:57:39 <ido-> nope, wasnt that
Mar 17 20:58:40 <ido-> http://www.pastebin.ca/946648
Mar 17 20:58:44 <ido-> ok take alook
Mar 17 21:00:16 <PPmarcel> ok, have you got special letters in your password or login?
Mar 17 21:00:34 <ido-> nope
Mar 17 21:00:37 <ido-> guest is empty
Mar 17 21:00:37 <PPmarcel> utf8 is fucked in windows
Mar 17 21:00:39 <PPmarcel> o
Mar 17 21:00:40 <PPmarcel> ok
Mar 17 21:00:42 <ido-> and the other user is ok
Mar 17 21:00:51 <ido-> UTF8 worked well with unslung
Mar 17 21:00:56 <ido-> but i can remove it fornow
Mar 17 21:01:21 <PPmarcel> when you try to access with windows in protected area, you can log?
Mar 17 21:01:35 <PPmarcel> and can you download when there is no password?
Mar 17 21:02:19 <alezzandro> ido-: have you tried to set "security = share" ?
Mar 17 21:02:37 <PPmarcel> it won't disable password?
Mar 17 21:02:58 <ido->  dont want share based security
Mar 17 21:03:20 <alezzandro> share solved me many problems in the past :)
Mar 17 21:04:26 <alezzandro> ido-: tried to: "passwd guest" ?
Mar 17 21:04:36 <alezzandro> setting blank password?
Mar 17 21:04:55 <alezzandro> (just pressing 'enter')
Mar 17 21:05:16 <alezzandro> on slugos it worked for me
Mar 17 21:05:31 <ido-> yes i have alezzandro 
Mar 17 21:07:27 <alezzandro> smbpasswd guest?
Mar 17 21:07:47 <ido-> i set it with -n
Mar 17 21:07:49 <ido-> = no password
Mar 17 21:08:15 <ido-> when i login with guest and no password from windows, it works
Mar 17 21:08:24 <ido-> but the thing is, i dont want it to ask for a user at all
Mar 17 21:08:30 <ido-> it didnt ask one in unslung
Mar 17 21:09:27 <PPmarcel> weird
Mar 17 21:09:27 <alezzandro> the problem is: how windows call the anonymous user? guest? i don't know..
Mar 17 21:09:45 <alezzandro> mac os x, call him: guest, so on mac it works very well
Mar 17 21:09:46 <ido-> you can make it a guest only..
Mar 17 21:35:20 <ido-> hey 
Mar 17 21:35:30 <ido-> Reedy_Boy: can you help me out with samba shares ?
Mar 17 21:35:42 <Reedy_Boy> mebbe.. whats uo?
Mar 17 21:35:46 <Reedy_Boy> up
Mar 17 21:39:43 <ido-> hrm
Mar 17 21:39:54 <ido-> my 'map to guest' doesnt work
Mar 17 21:40:20 <ido-> shit i'm tired
Mar 17 21:41:01 <Reedy_Boy> Whats up?
Mar 17 21:41:18 <ido-> still havent gotten rtorrent to work with xmlrpc
Mar 17 21:42:06 <PPmarcel> what is xmprpc?
Mar 17 21:42:43 <PPmarcel> oh, i see
Mar 17 21:43:18 <ido-> no fancy gui
Mar 17 21:43:20 <PPmarcel> we can do a torrentflux like, with xmlrpc?
Mar 17 21:43:25 <PPmarcel> ah ok
Mar 17 21:43:32 <ido-> google wtorrent
Mar 17 21:43:34 <ido-> ntorrent
Mar 17 21:43:40 <PPmarcel> so just some fuctions trough a web server?
Mar 17 21:43:40 <ido-> or both
Mar 17 21:43:42 <ido-> and more ;)
Mar 17 21:43:44 <PPmarcel> ah ok
Mar 17 21:43:46 <ido-> yeah
Mar 17 21:43:47 <PPmarcel> i see what is it
Mar 17 21:44:38 <PPmarcel> i prefer ncurse xD
Mar 17 22:00:31 <asa> bye@all
Mar 17 22:10:31 <abliss> hi all... has anybody managed to successfully pull the i2c signal from the x1205 pins?
Mar 17 23:42:24 <abliss> who has a favorite way of opening the case without damaging the plastic?
Mar 17 23:56:18 <mwester> abliss:  The wiki has the info; that's the best way to do it.
Mar 17 23:56:46 <abliss> finally found it.  wiki search kinda sucks :(
Mar 18 00:00:10 <abliss> mwester: i have i2c and serial working now, the one final thing I wanted to grab was a GPIO -- the wiki suggests taking the green power LED; any comment?
Mar 18 00:00:53 <mwester> Personally, I'd grab the GPIO(s) for the disk leds if you are running SlugOS; they're not used.
Mar 18 00:02:21 <abliss> know a good place to pick 'em up?
Mar 18 00:03:22 <mwester> There are extra spots on the board that are alternate locations for the LEDs; that would probably be a good location.
Mar 18 00:03:35 <mwester> Don't know if they are buffered or not, you'll have to test and measure.
Mar 18 00:03:50 <mwester> Pretty obvious to find when you get the board out.
Mar 18 00:05:00 <abliss> the big ovals marked D2, D3, D6, D5?
Mar 18 00:18:24 <abliss> any way to access gpio from userspace?
Mar 18 00:31:52 <abliss> the wiki mentions "Set_Led" but where do i find it?  it's not in ipkg.
Mar 18 00:34:37 <mwester> Part of Unslung.
Mar 18 00:34:42 <mwester> Linksys utility
Mar 18 00:34:53 <abliss> ah, it's "leds" in SlugOS/BE..
Mar 18 01:52:43 <Jadefalcon> Anyone here?
Mar 18 01:57:04 <abliss> mostly lurkers.
Mar 18 01:57:13 <Jadefalcon> Ahhh I noticed.
Mar 18 01:57:37 <Jadefalcon> Well does anyone know what resistors types are for the USB ports?
Mar 18 01:58:13 <abliss> can you explain more what you're trying to do? i don't understand the question.
Mar 18 01:58:45 <Jadefalcon> I'm trying to load custom firmware onto my nslu2.  and adding additional USB ports.
Mar 18 01:59:00 <abliss> why not just use a hub?
Mar 18 01:59:08 <Jadefalcon> I think I fried one of the resistors and that is why I cannot get Debian loaded.
Mar 18 01:59:30 <Jadefalcon> I can get unslung to work but only that and the original firmware.
Mar 18 01:59:46 <Jadefalcon> So it is all self contained. 
Mar 18 02:03:15 <Jadefalcon> That and I want to run IRshell directly from where the files are going to be resideing.  instead of them being requested from a PC sent to that pc then sent back through the router to be sent out onto the net.
Mar 18 02:04:06 <ShadowJK> I'd guess the obvious troubleshooting step would be to plug in a drive in the suspected faulty port while running unslung, and check dmesg if the drive is found
Mar 18 02:04:47 <Jadefalcon> will unslung recognize the additional usb ports?  iv'e gotten it to boot from one but not to be able to recognize more than 2 ports.
Mar 18 02:05:07 <ShadowJK> I think it should
Mar 18 02:05:22 <ShadowJK> It might not do anything sensible like use the hardrives or display anything in the web interface
Mar 18 02:05:34 <ShadowJK> but they'd probably show up with lsusb or similar
Mar 18 02:05:41 <Jadefalcon> I've been told it is hardcoded into the linksys firmware to not be able to....
Mar 18 02:06:11 <Jadefalcon> Ok let me try it again. 
Mar 18 02:07:09 <ShadowJK> Well if unslung/linksys firmware completely ignores extra ports, then how about temorarily installing debian on one of the stock USB ports, which you can confirm working/not working through linksys/unslung, and then plugging stuff into the extra ports and see if debian recognizes stuff there?
Mar 18 02:08:23 <Jadefalcon> Debian causes a red light on my system.  
Mar 18 02:08:57 <Jadefalcon> as does SlugOSBE and OpenWRT and Angstrom.
Mar 18 02:09:08 <Jadefalcon> But Official and Unslung both work.
Mar 18 02:10:32 <Jadefalcon> I have tried reflashing everything includeing reseting sysconf and even telneting into redboot and upgradeing useing TFTP
Mar 18 02:25:58 <Jadefalcon> okdmesg shows 3 usb ports.
**** ENDING LOGGING AT Tue Mar 18 02:59:57 2008