**** BEGIN LOGGING AT Mon Mar 24 02:59:57 2008 Mar 24 04:09:42 Can uNSLUng 6.10 use a Fat16/Fat32 disk or does it have to be etx3? Mar 24 04:42:57 yea, they can use that Mar 24 04:43:30 the main disk should be ext3 Mar 24 04:57:05 Thanks. Mar 24 04:57:35 If I want to leave the NSLU on, can I just turn off the data drive that it did NOT boot from, or do I need to leave it on too/ Mar 24 04:57:36 ? Mar 24 04:58:50 If the data disk is FAT16/FAT32 what is the proper way to remove it to move it to another machine (Computer)? Power down the NSLU2? The disks are NOT hot swapable, right? Mar 24 05:50:35 the secondary one is Mar 24 05:51:00 proper way to remove it would be to shutdown the nslu2, or probably better ... just umount it Mar 24 07:53:58 hi Mar 24 11:04:10 I am trying to flash an nslu with the debian bin file (debian-4.0r3, but keep getting error: bad filename or format Mar 24 11:27:11 have you unzipped it? Mar 24 11:27:39 ukwiz, ^ Mar 24 12:49:58 reedy: sorry, been away getting lunch! Yes, I used the di-nslu2.bin file - 8MB Mar 24 12:50:45 can you run ukwiz, have you tried downloading it again? Mar 24 12:50:50 how are you trying to flash it? Mar 24 12:55:19 If I want to go from Unslung to Debian on my NSLU2, will I be able to keep the content on the HDD? Mar 24 12:55:43 Kvaks, as long as you didnt install debian to it.. yes Mar 24 12:56:18 So a Debian installation will fit on the flash? Mar 24 12:56:21 No Mar 24 12:56:31 You need to do it to a hard drive/flash disk Mar 24 12:56:39 I see. Mar 24 12:56:48 But if you have data on a drive for unslung, you are not going to be able to easily install debian onto it Mar 24 12:57:53 Ok, so I can install Debian on an USB flashdrive and leaving the drive be. Mar 24 12:57:59 Seems like a decent solution. Mar 24 12:59:59 Yeah Mar 24 13:00:18 Unslung is such an awkward Linux to use, and I don't really need the NSLU2 web interface and such. So I might as well go Debian on it. Mar 24 13:02:35 reedy: I also tried it with the v5 beta - same problem. I am installing from the admin interface on unslung v2.3r63-unslung-6.8-beta Mar 24 13:03:12 ah, you cant upgrade using the unslung interface Mar 24 13:03:20 the functionality is disabled Mar 24 13:03:47 ukwiz, you need upslug2 on linux or the sercomm tool for windows Mar 24 13:25:51 Reedy: Ahh!!! Thanks. Downloading it now... Mar 24 14:16:35 hello i need help Mar 24 14:20:59 just ask your question, if someone can help, they will Mar 24 14:22:34 cant get printer to work Mar 24 14:22:48 cant get tv-stick (nova-t) to work Mar 24 14:22:58 iscsi is slow Mar 24 14:23:12 i have debianslug Mar 24 14:23:36 printer is detected as /dev/usb/lp0 Mar 24 14:23:53 tv is detected as /dev/dvb/adapter0 Mar 24 14:24:02 cups is installed Mar 24 14:24:05 i have no clue Mar 24 14:36:06 iscsi isnt going to be fast TBH, due to the specs of the NSLU2 Mar 24 14:36:32 Have you tried following the guides on the wiki? Mar 24 14:40:35 * mwester notes that reads like a litany of complaints, but has not specific questions that can be answered. Mar 24 14:41:03 i tried everything Mar 24 14:41:25 are normal shares bestter than iscsi? Mar 24 14:41:54 define "normal shares" Mar 24 14:41:59 samba? NFS? Mar 24 14:42:22 You haven't mentioned what speeds you get, and what you require. Mar 24 14:42:45 mwester, surely, if everything has been tried... it should be as good as its going to get? ;) Mar 24 14:43:41 :) There was a gentleman some time ago who had a screwed up wireless LAN that broke things... Mar 24 14:47:30 i get about 1150 kb/s with iscsi Mar 24 14:47:58 is nfs faster? Mar 24 14:48:24 http://www.nslu2-linux.org/wiki/Info/Performance Mar 24 14:53:47 3.5 mb? Mar 24 14:53:58 wow, how can i set it up? Mar 24 14:54:02 in windows? Mar 24 15:01:14 install samba? Mar 24 15:23:44 hi@all Mar 24 15:24:29 what is the reason when the nslu tripple beep every 15 seconds? Mar 24 15:37:19 asa: that would be software that does that, not the hardware. So you need to mention what firmware you have installed on the device. Mar 24 15:38:07 hi Mar 24 15:38:15 unslung 6.10 Mar 24 15:40:35 http://www.nslu2-linux.org/wiki/FAQ/BeepingEvery8Hours ? Mar 24 15:41:48 ah, ok Mar 24 15:42:43 thx Mar 24 15:43:08 next time i look in the wiki before asking here :) Mar 24 21:23:57 hi i am running unslung 6.10 and in my dmesg i´ve got this message Mar 24 21:23:58 *** 49 Mar 24 21:24:00 Vendor: Seagate Model: FreeAgentDesktop Rev: 100D Mar 24 21:24:00 Type: Direct-Access ANSI SCSI revision: 02 Mar 24 21:24:00 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Mar 24 21:24:02 SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) Mar 24 21:24:05 31 port connect!!!!! Mar 24 21:24:07 /dev/scsi/host1/bus0/target0/lun0: p1 Mar 24 21:24:10 WARNING: USB Mass Storage data integrity not assured Mar 24 21:24:12 USB Mass Storage device found at 11 Mar 24 21:24:15 usb.c: USB disconnect on device 00:01.2-1.1 address 9 Mar 24 21:24:16 ~pastebin Mar 24 21:24:18 what is the problem here ? Mar 24 21:24:24 do i need to update something ? Mar 24 21:25:16 http://pastebin.com/m2a5b018d Mar 24 21:37:57 anyone using vdradmin-am ??????? Mar 25 01:01:47 so did anyone else get jerked around by tigerdirect this weekend? Mar 25 01:19:32 nope, just you **** ENDING LOGGING AT Tue Mar 25 02:59:56 2008