**** BEGIN LOGGING AT Sun May 18 02:59:57 2008 May 18 04:21:51 howdy May 18 04:24:17 im kind new to linux, im having a hard time trying to get to my hard rive on port #1 (which is not unslung) May 18 04:24:46 from the console i mean May 18 04:48:34 Perhaps you can describe things in a bit more detail? If it's not unslung, are you still running from flash, or is this the original Linksys firmware? What type of filesystem is on the drive? What have you tried to do that is failing? May 18 04:50:31 oh sorry, my drivce on port#2 is the unslung drive, which i cn find the files on it undder 'pubic' May 18 04:51:21 i just dont know how to gget to the other drive May 18 04:55:34 my unslung drive is ext3 pugged into port 2, and my other drive is ft32 plugged into port 1 May 18 04:55:43 *fat32 May 18 05:00:27 http://www.nslu2-linux.org/wiki/Unslung/R63DiskBehaviour May 18 05:00:34 The wiki is your friend... :) May 18 05:01:53 yeh ive actually read tht already May 18 05:01:53 my question is mroe a generl linux question May 18 05:04:00 sorry, wireless kicked ut on me May 18 05:04:25 so anyway, ive already read that page. May 18 05:04:59 i just need to know where to find the files from the other drive. for instance, files on disk 2 aare in 'public' May 18 05:08:37 Just read column 3 - "Mount point" May 18 05:09:45 "public" is because it's natively-formatted, not FAT May 18 05:10:05 right May 18 05:10:59 i'll be daned May 18 05:11:03 damned too May 18 05:11:06 thanks May 18 08:00:52 I'm running SlugOS BE on a NSLU2 and trying to get php working on the cherokee web server, anyone with experience in that field? Seems like I should use php-fcgi but there is no such package in default package repositories as it seems. Where should I preferebly dl it from? May 18 09:05:24 the package or the source? May 18 09:05:30 for the later, php.net ;) May 18 09:46:37 a package May 18 09:48:30 installed slugos from binary so I don't have a build environment setup right now May 18 09:53:23 there wont be a conflict with 2 drives formatted as ext3 as long as only one is natively formatted with unslung... right? May 18 09:59:33 skream never heard its a problem format 2 drives native May 18 10:01:44 I think I have two drives native May 18 10:01:49 i do May 18 10:02:08 the wiki says there are issues with having 2 drives natiely formatted May 18 11:28:35 hey i have a problem with slugos/be .....the slug is unreachable 5min after the double beep signals a correct boot......if i switch the power off and on agian ....it comes up normally May 18 11:28:42 any solutions ? May 18 11:56:19 hello May 18 11:56:30 i have a usb drive May 18 11:57:03 when i plug it in i get a /dev for example sdb1 May 18 11:57:26 but sometimes it get sbc1 May 18 11:58:16 thats problematic because i have static fstab mount rules May 18 11:58:20 how can i fix it? May 18 12:19:15 hello, I need to reinstall unslung but upgrade utility make Vista crasch and I have no win-XP,anyone know a fix for this? I run it in xp compability mode---dont works. May 18 12:26:09 hi@all May 18 14:40:48 janne5011: Grab some linux live-CD and boot into it. May 18 15:33:50 hi May 18 15:35:09 i need some help getting my imic to work with unslung May 18 15:35:14 can anyone help? May 18 15:36:02 what's imic? May 18 15:36:11 a usb sound device May 18 15:36:53 http://www.griffintechnology.com/products/imic May 18 15:37:23 some people have reported it to work but after following the how-to i still get no sound May 18 15:52:11 can anyone help? May 18 15:54:38 Simbo: If you provide more information, someone may have an answer. What how-to (provide URL)? What error messages do you get? What things have you already tried to solve the problem? May 18 15:57:33 i'm pretty new to linux so i can only really follow what other people have done May 18 15:58:09 i get an error about the sample rate May 18 15:59:48 and in the server.log file i noticed an error about being un able to find desired sample rates May 18 16:01:18 i'm booting the nslu2 now and i will post the error May 18 16:01:19 s May 18 16:07:08 output: sample frequency 44100 Hz not available; using 0 Hz May 18 16:07:36 output: cannot resample 44100 Hz to 0 Hz May 18 16:08:15 thats the output from madplay May 18 16:13:31 <43>May 18 16:23:11 klogd: usbaudio: set_format_out(): failed to find desired format/speed combination May 18 16:13:52 that was in the messages file in var/log May 18 16:15:03 Scan through the output from "dmesg" to see if there's anything in the kernel log that might indicate an error from the audio driver. May 18 16:15:25 The Linksys kernel is rather old; it may be as simple as it just doesn't have support for that device :( May 18 16:15:48 this is the url to the how-to May 18 16:15:49 http://www.nslu2-linux.org/wiki/HowTo/SlugAsAudioPlayer May 18 16:16:06 he has the same kernel version as me May 18 16:17:48 i have the same output from dmesg as the file in /var/log messages May 18 16:17:54 <43>May 18 16:23:11 klogd: usbaudio: set_format_out(): failed to find desired format/speed combination May 18 16:19:10 i'm thinking that the driver could need tweaking May 18 16:19:40 i am using the standard soundcore.o and audio.o modules May 18 16:30:42 anyone know where i can get the source for the audio.o module? May 18 16:32:54 Kvaks thanks for reply. May 18 16:37:14 has anyone tried to install sendmail? May 18 16:37:20 I'm having problems with dependencies. May 18 17:35:35 hey guys May 18 17:35:43 i'm having some trouble with debian on the slug May 18 17:35:58 i can't connect to it anymore May 18 17:37:03 The status light is supposed to go to green when it's booted up right? it never does, it always flashes amberambergreeeen (and sometimes simply alternates between amber and green) May 18 17:37:33 at this point the power button doesn't respond as well (i configured it to shut down) May 18 17:38:20 i've also set fsckfix=yes May 18 17:39:25 waltervos: it's normal to swtich between amber and green May 18 17:39:31 i've read all of the troubleshooting on debian on the wiki and nothing seems to help May 18 17:39:39 waltervos: does it respond to ping? May 18 17:40:00 gouki on this page it says something different http://svn.debian.org/wsvn/pkg-nslu2-utils/trunk/debian/README.Debian?op=file May 18 17:40:08 gouki: how do I ping it? May 18 17:40:16 waltervos: oh god! May 18 17:40:19 waltervos: ping IP May 18 17:40:46 waltervos: as in: ping 10.0.0.4 May 18 17:40:49 eh, i'm a windows guy. sorry May 18 17:40:58 waltervos: windows has ping too May 18 17:41:17 from cmd or something? May 18 17:41:22 waltervos: yes May 18 17:41:29 right May 18 17:41:29 waltervos: do you know what ssh is? May 18 17:42:02 i use ssh May 18 17:42:16 waltervos: If you're on Windows, use Putty to connect to your NSLU May 18 17:42:24 i've come a long way if i may say so. :) May 18 17:42:49 i already installed debian, i've downloaded some packages and messed with some configuration May 18 17:43:08 but the thing is just behaving unexpectedly all the time May 18 17:43:36 sometimes it boots fine and I can connect via ssh then a couple of hours later the connection is lost May 18 17:44:01 now for instance i can ssh with no problem May 18 17:45:39 gouki what could I investigate to see what's happening when this kind of behaviour occurs again? obviously we can't figure it out now since it's working again :S May 18 18:08:16 anyone in here run self-built slugosbe? seems like the built-in fdisk has issues changing a partition type; it never quits the command and goes back to querying me for the partition type. **** ENDING LOGGING AT Mon May 19 02:59:57 2008