**** BEGIN LOGGING AT Thu Jul 24 02:59:56 2008 Jul 24 08:07:04 Morning Jul 24 08:20:28 Morning Jul 24 08:38:20 Hallo? Jul 24 10:58:43 i have one question Jul 24 10:58:54 con somebody help me?? Jul 24 11:00:20 Maybe, if one day you ask :) Jul 24 11:02:29 Keksman3481 ? Jul 24 11:03:19 03 Jul 24 11:03:19 finally got the reports sry for my bad English. My problem is this: Jul 24 11:03:19 My NSLU2 has Unslung as firmware. I can ping but not on their webinterface access. I have already re geflasht99 Jul 24 11:04:54 do you understand my problem?? Jul 24 11:05:00 What adress do you ping? Jul 24 11:05:06 Yes ;) Jul 24 11:05:25 okay Jul 24 11:05:28 You can´t have zebmin, right? Jul 24 11:05:34 web;in* Jul 24 11:05:41 yes Jul 24 11:05:43 w e b m i n Jul 24 11:05:45 O Jul 24 11:05:46 k Jul 24 11:05:54 what is web min?? Jul 24 11:06:10 webmin is webinterface :) Jul 24 11:06:28 Ok so, what ip do you usually ping? Jul 24 11:07:06 one moment Jul 24 11:07:13 Yes take your time Jul 24 11:07:35 192.168.1.77 Jul 24 11:08:30 And that´s this adress, that you enter in your browser, when you try to go on the webinterface? Jul 24 11:08:40 yes Jul 24 11:09:09 Ok, let me see in the wiki Jul 24 11:10:07 my ping i snot very good <- the first ping reached the nslu2 but the next ping has a timeout Jul 24 11:10:34 And now, il you ping again, what do you have? Jul 24 11:10:45 il -> if Jul 24 11:11:52 omg all pings have a timeout Jul 24 11:12:05 How are leds, on your nslu2? Jul 24 11:12:18 Flashing? Jul 24 11:12:26 Ready green /Eternet green Jul 24 11:12:34 Ok Jul 24 11:12:45 But the programm find the Nslu2 Jul 24 11:12:57 Is there a disk or a usbflash plugged? Jul 24 11:13:00 with the ip 192.168.1.77 Jul 24 11:13:03 no Jul 24 11:13:21 eh Jul 24 11:14:00 Ok, you just flashed your nslu2, that´s all? Jul 24 11:14:15 Have you done somthing after uploading firmware? Jul 24 11:14:20 yes, but wait one moment Jul 24 11:14:24 Ok Jul 24 11:15:30 You have copy some datas on a disk or flashusb. Read the manual Jul 24 11:15:43 Thenm you should use your nslu2 with this disk Jul 24 11:16:01 If not, maybe you haven´t finished your setup yet Jul 24 11:16:25 I didn´t used unslung for long time, but that´s what i had to do Jul 24 11:16:41 okay Jul 24 11:17:04 Well, read the readme again so :) Jul 24 11:17:18 You needn´t to reflashm just continue the setup Jul 24 11:17:39 the setup from the cd Jul 24 11:17:40 ? Jul 24 11:17:46 No :) Jul 24 11:17:54 hmm Jul 24 11:18:14 Well, you have a readme, with firmware files, right? Jul 24 11:18:47 ah okay yes Jul 24 11:19:04 Ok, have you read it? Jul 24 11:19:53 ok Jul 24 11:20:03 I think you pissed part 3 Jul 24 11:20:07 missed Jul 24 11:20:11 sorry :) Jul 24 11:21:00 oh Jul 24 11:21:06 thank you Jul 24 11:21:13 At part 2, c), they say that you can go on webinterface, but i´m not sue it will zork Jul 24 11:21:21 Then follow all part 3 Jul 24 11:21:29 I read it straight ^ ^ Jul 24 11:21:37 No problem :) Jul 24 11:22:21 irc chat is very helpful^^ Jul 24 11:22:52 Yep, but you have to ask and wait a long time, sometimes :) Jul 24 11:23:11 Use patience and someonewill help you Jul 24 11:26:20 k Jul 24 12:58:16 hmm, is there an optware package out there that give a "real" cp command? the busybox one is missing the -l option, which is screwing up my incremental rsync backups Jul 24 12:59:42 And ln? Jul 24 12:59:53 Cp -l is a link, so use ln -s? Jul 24 13:00:06 hello Jul 24 13:00:09 Hi Jul 24 13:01:25 ah, true Jul 24 13:05:10 well, I could just use hard links for my incrementals, but that will also hard link the directories, not just the files right? Whereas a cp -al would only link the files? Jul 24 13:06:15 ah, found a tip online if you don't have gnu cp, you can replace the functionality with a bit of find && cpio Jul 24 13:06:17 Well, I guess ln would link everything, right Jul 24 13:06:29 ah? Jul 24 13:06:58 Portability tip: If you don't have GNU cp installed (if you're using a different flavor of *nix, for example), you can use find and cpio instead. Simply replace cp -al a b with cd a && find . -print | cpio -dpl ../b. Thanks to Brage Førland for that tip. Jul 24 13:07:08 from http://tinyurl.com/905u Jul 24 13:07:22 little page on doing incremental rsync backups Jul 24 13:10:14 :) Jul 24 13:10:26 Add this tip in wiki :) Jul 24 13:11:11 hmm, can't remember if there was a backup wiki or not on there to add this to Jul 24 13:12:59 Maybe around rsync Jul 24 13:13:10 I found one Jul 24 13:13:27 I'll take a peek at it later today, and add a bit to it if it fits Jul 24 14:50:54 Thank PPmarcel for your help but i didnt unsterand the Manual Jul 24 14:51:23 Ok, say me where? Jul 24 14:52:13 k Jul 24 14:52:16 one moment Jul 24 14:53:04 1.2 Jul 24 14:53:34 Where is it? Jul 24 14:54:29 The link of this text is http://www.nslu2-linux.org/wiki/HowTo/RecoverFromABadFlash <--- i didnt understand, Jul 24 14:54:40 how I come in the redboot Jul 24 14:54:45 Ow Ow Ow ^^ Jul 24 14:54:53 You are already there? Jul 24 14:55:07 Ok, i read Jul 24 14:55:36 i klick 10second sthe restart button down Jul 24 14:56:13 but the status led isnt red Jul 24 14:56:41 Yes, "new" series haven't got a red light Jul 24 14:56:46 But an amber one Jul 24 14:57:05 When you boot, your led is almost yellow Jul 24 14:57:12 yes Jul 24 14:57:16 After 10s, it become yellow dark Jul 24 14:57:29 That was red on older series Jul 24 14:57:35 ok, Jul 24 14:57:53 You sill cannot ping your nslu2 ? Jul 24 14:57:55 okay , one mor question Jul 24 14:58:45 where can i get the Erase tool Jul 24 14:58:46 ? Jul 24 14:58:52 Recovering from a bad flash is extreme, i don't think that you have bricked your nslu2 Jul 24 14:59:03 The link on this page isnt a download link Jul 24 14:59:10 okay Jul 24 14:59:37 Re-Flashing using Upslug2 Jul 24 14:59:38 ? Jul 24 14:59:58 Could it be that Jul 24 15:00:13 Yes, you we will start again from zero, if you agree Jul 24 15:00:18 - you Jul 24 15:00:40 Do you use Linux or Windows? Jul 24 15:00:53 in the moment Windows Jul 24 15:00:56 Ok Jul 24 15:00:59 but i have Ubuntu Jul 24 15:01:09 You have the flash uility on windows? Jul 24 15:01:14 Live ditrubtion Jul 24 15:01:23 "dirstrubtion" Jul 24 15:01:25 No, stqy where you are Jul 24 15:01:31 stay where you are Jul 24 15:02:04 on Windows Jul 24 15:02:10 Xp Jul 24 15:02:15 Yep Jul 24 15:03:19 Ok, search in google Sercomm utility Jul 24 15:03:44 http://www.everbesthk.com/8-download/sercomm/firmware/NU54/Upgrade_207_XP.zip Jul 24 15:03:50 This link if you want Jul 24 15:04:38 Install it, and then launch it Jul 24 15:05:32 okay Jul 24 15:05:50 You rmember how turn your nslu2 in upgrade mode? Jul 24 15:06:14 You press backward button and restart the device Jul 24 15:06:24 yes Jul 24 15:06:37 After 10s, the atatu led become a little bit darkerm you release the button and it flashe Jul 24 15:06:45 flash* Jul 24 15:07:07 w* Jul 24 15:07:09 w8 Jul 24 15:08:09 But I have already flasht my NSLU2, an hour ago Jul 24 15:10:10 - Jul 24 15:10:26 ok, its Upgrading Jul 24 15:11:20 Ok Jul 24 15:11:27 We just start again Jul 24 15:11:39 You can upload your frimware? Jul 24 15:11:48 With sercomm utility Jul 24 15:12:07 But I think that isnt the problem. I have it for an hour already geflasht Jul 24 15:12:13 ok one moment Jul 24 15:12:30 ²Ok, so don't continue Jul 24 15:12:53 Go to the next step Jul 24 15:12:59 Open a terminal Jul 24 15:13:13 yes Jul 24 15:13:23 type 'telnet 192.168.1.77' Jul 24 15:14:00 It asks you a login/passwor? Jul 24 15:14:49 no Jul 24 15:15:02 ich checked the ip Jul 24 15:15:28 I had to enable telnet via webinterface before all, but if you can't accessm we won't go far :s Jul 24 15:15:34 k Jul 24 15:16:16 Keksman3481: One thing which could fix your problem, is to flash your nslu2 with stock firware Jul 24 15:16:37 ok, have it a risiko? Jul 24 15:16:51 What? Jul 24 15:17:54 Go on Linksys website and find their firware. Flash your nslu2, fix the ip, and then flash it again, but use unslung, and use webmin for flahing, not upgrade mode Jul 24 15:18:55 http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859881077&packedargs=sku%3D1115416906769&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=8107735852B03&displaypage=download#versiondetail Jul 24 15:19:03 Ok? Jul 24 15:19:49 ok i ddownload the firmware Jul 24 15:19:52 k Jul 24 15:20:11 Thank you for helping Jul 24 15:20:30 I already had some problems with unslung, and flashing with stock firmware helped me to use it again Jul 24 15:20:35 Ah, np Jul 24 15:20:46 Und Jul 24 15:20:47 Viel Glück Jul 24 15:20:50 :) Jul 24 15:21:11 Omg Jul 24 15:21:14 kannst du Deutsch Jul 24 15:22:00 >>ich seheh als Lern hilfe für Englisch<< falls du das verstehst Jul 24 15:27:04 Hihi, ich schpreche nich gut Jul 24 15:27:19 Ich bin französish ;) Jul 24 15:27:34 aso Jul 24 15:27:38 I just have some memories of y german :) Jul 24 15:27:40 okay Jul 24 15:27:44 my* Jul 24 15:29:31 Je parle un peu français^^ Jul 24 15:29:51 cool :) Jul 24 15:30:09 Tu préfère parler anglais? Jul 24 15:30:36 brb Jul 24 15:30:38 Je ne peux pas bien parler Jul 24 15:31:48 En anglais, j'ai un plus grand vocabulaire Jul 24 15:32:15 Et je ne peux pas bien la grammaire Jul 24 15:36:34 it still does not work;( Jul 24 15:47:32 :S Jul 24 15:48:21 He has left :/ Jul 24 16:16:46 zedakster: ipkg install coreutils Jul 24 16:21:12 Thanks. I actually used the find/cpio work around. Posting my backup script on the wiki now Jul 24 19:28:37 Wow. There are more ppl in the channel than there used to be. Jul 24 20:31:43 caplink811_log: hey :) morning Jul 24 20:41:17 * chrisb still wondering how to get ntpdate or something ntp working on slugosbe **** ENDING LOGGING AT Fri Jul 25 02:59:57 2008