**** BEGIN LOGGING AT Wed Apr 06 23:59:56 2005 Apr 07 01:00:53 hmm Apr 07 01:28:21 <[g2]> wb Apr 07 02:21:57 yay. Slug worked. Slug also worked *after* soldering ;) Apr 07 03:23:29 The slug doesn't output anything to the serial port when running the stock firmware, does it? Or have I messed up the soldering? Apr 07 03:30:06 <[cc]smart> at least during early startup, redboot should respond Apr 07 03:35:15 hmm... not good Apr 07 03:37:44 I get "Connected." with cu the instant I switch the slug on. That's it... Apr 07 03:38:57 <[cc]smart> you followed one of the howtos ? Apr 07 03:40:28 yeah Apr 07 03:40:45 so supposedly, I've soldered it correctly ;) Apr 07 03:41:04 hrrm Apr 07 03:41:21 * NAiL gets a creeping suspicion he's switched RX and TX Apr 07 04:40:26 any opensluggers here? Apr 07 04:42:20 NAiL: they're all camping in #openslug :) Apr 07 04:44:16 ah... there's an openslug? Apr 07 04:44:17 :) Apr 07 04:45:53 03ptweety * 10unslung/ (6 files in 4 dirs): libnsl.mk, libstdc++.mk and groff.mk now generating the control files Apr 07 04:58:51 03jeanfabrice * 10unslung/sources/ (m4/control make/control): Control file now generated Apr 07 04:59:16 03jeanfabrice * 10unslung/ (10 files in 5 dirs): Control file now generated Apr 07 05:27:59 rwhitby-away: ping Apr 07 06:30:32 03jeanfabrice * 10unslung/ (6 files in 3 dirs): Added libosip2 and siproxd module Apr 07 07:26:31 jeanfabrice-zzz: pong Apr 07 07:31:49 03rwhitby * 10unslung/Makefile: Updated wl500g packages due to Jean-Fabrice's work. Apr 07 07:32:57 rwhitby-away: did I make something wrong ? Apr 07 07:33:48 jeanfabrice: no, I was just updating the WL500G_PACKAGES in the Makefile so the new packages get into the feed, Apr 07 07:34:05 ok, ok Apr 07 07:35:05 have also updated some packages for control file generation. Don't know what to do with makefile when package are updated for control file generation... Apr 07 07:35:52 if the package was in the wl500g_package_that_just_need_control_file, then you should immediately move that package to the wl500g_packages (as it has already been shown to build). Apr 07 07:36:49 ... and I don't understand why is there a wl500g_package_that_just_need_control_file as control file generation has to been done for all package, no ? Apr 07 07:37:08 03rwhitby * 10unslung/make/m4.mk: Fixed the line which generates the ipk control file. Apr 07 07:37:24 yes, but those are the ones that already build without errors and only need control file generation Apr 07 07:38:45 'find sources -name control | wc -l' gives me around 180 packages with control file still there Apr 07 07:38:54 yep Apr 07 07:39:58 you created a sub of those package which build correctly for wl500 ? Apr 07 07:41:38 03rwhitby * 10unslung/Makefile: Promoted libcurl for wl500g. Apr 07 07:41:50 yeah, thats the just_need_control_file variable. Apr 07 07:42:08 those are the "low hanging fruit" Apr 07 07:42:21 ok :) Apr 07 07:43:16 ok, groff, libosip2, m4, make, man, man-pages, patch, portmap and siproxd are now in the wl500g feed Apr 07 07:43:30 cool Apr 07 07:43:31 and libcurl too soon Apr 07 07:43:53 will announce this on chupa as some were looking for sip proxy Apr 07 07:44:01 jeanfabrice: have you head of a Neuston Virtuoso MC500 ? Apr 07 07:44:06 s/head/heard/ Apr 07 07:44:49 jeanfabrice: BTW, great job on all the new packages for wl500g :-) Apr 07 07:45:23 nop. Just discovered it right now on google Apr 07 07:45:34 I'm just checking now to see if siproxd compiles on the nslu2 too. Apr 07 07:46:13 My MC500 arrives today. There is a OpenShowCentre server which can be used (actually there are three such open source replacement servers). Apr 07 07:47:01 The MC500 is basically a multimedia streaming web browsers. It connects to a server on the LAN, and just streams whatever the server gives to it. Apr 07 07:47:39 through upnp ? Apr 07 07:47:42 I want to run the server on the nslu2 or the wl500gx Apr 07 07:47:50 actually, these ones just use http Apr 07 07:48:03 stream over http? humm Apr 07 07:48:11 so the software just needs php 4.3 running on the server machine. Apr 07 07:48:34 what about a upnp server on nslu ? are they any opensource ? Apr 07 07:49:45 03rwhitby * 10unslung/Makefile: Added libosip2 and siproxd for cross testing on nslu2 (courtesy of Jean-Fabrice). Apr 07 07:50:00 not that I know of. They twonky server works well - it is a commercial product that works with Unslung firmware. Apr 07 07:50:31 on the wl500gx, I will be wanting to replicate your thttpd/php solution :-) Apr 07 07:51:06 jeanfabrice: you just contributed yet another package for the nslu2 :-) Apr 07 07:52:45 What thttpd/php solution ? Still haven't one for unslung build system Apr 07 07:56:41 bye Apr 07 07:57:04 03rwhitby * 10unslung/make/m4.mk: Fixed the .built dependencies. **** ENDING LOGGING AT Thu Apr 07 10:11:18 2005 **** BEGIN LOGGING AT Thu Apr 07 10:14:04 2005 Apr 07 13:30:11 hello Apr 07 13:31:37 or not Apr 07 13:32:03 :) Apr 07 14:18:07 I think I've bricked my slug... trying to upslug the firmware gives a blinking red light at the top... Apr 07 14:18:40 jstueve it was originally a r25 firmware, that I didn't save, and I've tried the r29 linksys firmware, and the unslug-3.18 beta Apr 07 14:18:40 jstueve any suggestions? Apr 07 14:18:40 * NSLU2-IRC has quit (Client Quit) Apr 07 14:21:50 jstueve, what is happening? Apr 07 14:22:24 whe it resets (it responds to the a upslug -r) it blinks and then it blinks red... Apr 07 14:22:47 any attempt to try to get it to respond to a web request fails... so I can't turn on the telnet... Apr 07 14:23:00 do you have a serial port? Apr 07 14:23:19 nope... I verified that I could redboot and figured that was enough... Apr 07 14:23:28 usually it is. Apr 07 14:23:47 okay when you reboot it stays red and never boots? Apr 07 14:24:06 I stupidly did a (rm -rf *) by accident on the attached drive, but all this is happening with no disks attached Apr 07 14:24:11 yeah. Apr 07 14:24:17 will it blinks red. Apr 07 14:24:59 did you upgrade with a HD attached? Apr 07 14:26:04 no..; upgraded empty... Apr 07 14:26:14 okay thats good Apr 07 14:26:29 top light flashes red/green, second light flashes green... Apr 07 14:26:52 okay just let it go for a while. Apr 07 14:27:00 (like 10 mnutes) Apr 07 14:27:12 like try again in the morning? :) it is 12:30 here... Apr 07 14:27:13 and see if it eventually beeps. Apr 07 14:27:23 okay..no problem Apr 07 14:27:26 10:30 here Apr 07 14:27:49 ah.. the west coast... I used to live in San Diego and Monterey... much better vistas than Dallas. Apr 07 14:27:59 if at first you dont' find somebody here just wait...eventually somebody will be around Apr 07 14:28:11 Monterey is Beautiful Apr 07 14:28:21 I am near Ventura Apr 07 14:28:27 roger... I'll have to open my port from work, work firewall frowns on IRC.. Apr 07 14:28:35 I used to live in Goleta too... Apr 07 14:28:47 (I am in Goleta) Apr 07 14:28:48 body surfed at El Captian as a kid. Apr 07 14:29:25 I like Goleta..but may have to move to Santa Maria. Apr 07 14:29:38 that further north? Apr 07 14:29:48 yeah...1hr up the 101 Apr 07 14:30:04 Near Pismo Dunes Apr 07 14:30:09 close to Pismo...if I remember my geography Apr 07 14:30:21 heh Apr 07 14:30:27 you do... Apr 07 14:30:33 now I can't even ping it... Apr 07 14:30:44 I tried resetting the SysConf... Apr 07 14:30:50 a while ago.. Apr 07 14:31:01 I'll just let it set, and bring it to work with me... Apr 07 14:31:08 okay well...it sounds like are you on the right back. Apr 07 14:31:11 er track Apr 07 14:31:40 I hope I can revive it... the wife probably won't let me get another one... :D Apr 07 14:31:44 I'll be in Ventura and on Santa Ynez peak tommorrow so I won't probably be online during the day. Apr 07 14:31:59 I'll find someone... either here or the yahoo group... Apr 07 14:32:06 first time I fubar'd something... Apr 07 14:32:16 thank you for your help... and the memories.. :d Apr 07 14:32:18 :D Apr 07 14:32:20 no problem..we all do. Apr 07 14:32:41 g'night. Apr 07 14:32:43 hope to see you again here. (under better circumstansites! Apr 07 14:32:50 circumstances Apr 07 14:32:54 nite Apr 07 14:33:00 yeah.. with an openslug beta... :D Apr 07 16:43:23 morning Apr 07 16:45:57 morning perlguru! Apr 07 16:46:56 do I remember correctly that you're running an openslug built by an amd64 in 64bit mode? Apr 07 16:55:22 i build openslug on my amd64. Apr 07 16:55:33 and does it work? Apr 07 16:56:08 well, it boots it runs Apr 07 16:56:18 installed ssh, that works Apr 07 16:56:34 no luck yet using nfs or samba Apr 07 16:56:48 miau works Apr 07 16:56:55 thttpd works Apr 07 16:56:56 okay, when I build it on an amd64 the network doesn't come up. so seems to work in theory Apr 07 16:57:33 i had no problems with network Apr 07 16:58:04 cvs also works Apr 07 16:58:07 I suspect that my rootfs becomes too big when built by an amd64, I'm investigating that further today. Apr 07 16:58:38 bk-pulled recently? Apr 07 16:58:57 check defconfig, they stripped a lot Apr 07 16:59:28 yes, I'm just building an almost-recent oe, although with my own defconfig Apr 07 17:00:37 i am planning on revrting back to unslung, because of the lack of packages ( or non-working packages ) Apr 07 17:01:03 really? I don't miss anything in openslug. What do you need? Apr 07 17:01:18 nfs, samba apache perl Apr 07 17:01:43 nfs works fine for me, perl is indeed broken. Apr 07 17:02:00 hey, you're perlguru, it's your job to fix it! ;) Apr 07 17:02:10 you can nfs mount to the slug? Apr 07 17:02:36 perl != perl-buildsystem ;) Apr 07 17:02:36 I can mount nfs-shares in both directions. Apr 07 17:02:53 mmm. Apr 07 17:02:59 how? Apr 07 17:03:13 do you use nfs-utils? Apr 07 17:03:15 I had to build nfs-utils on the slug. Apr 07 17:03:34 the oe-build of nfs-utils was broken when I needed it, dunno if they fixed it. Apr 07 17:03:37 i did that too Apr 07 17:03:58 so, why doesn't it work? Apr 07 17:04:01 dyoung fixed it (not tested) Apr 07 17:04:12 dunno. Apr 07 17:04:41 loaded modules sunrpc nfsd Apr 07 17:04:59 exportfs showed the mount points Apr 07 17:05:39 you started some instances of nfsd, mountd et al? Apr 07 17:06:12 i think so. Apr 07 17:06:19 cannot check now. Apr 07 17:07:19 can you write a little howto and put it on the wiki? Apr 07 17:08:28 I guess there are zillions of nfsd-howtos out there, why should we need one especially for the slug? Apr 07 17:10:11 how about that one? http://nfs.sourceforge.net/nfs-howto/server.html Apr 07 17:10:25 because i followed those manuals and it didnot work for me... (guess the slug is special) Apr 07 17:11:10 no, it works as usual. I think I even stole my desktop's startup script for nfs-kernel-server to get the thing going. Apr 07 17:11:42 ok, i'll try it again tommorrow Apr 07 17:12:41 yeah, anything is better than going back to unslung... Apr 07 17:12:43 * siddy-work hides Apr 07 17:13:36 got samba working? Apr 07 17:14:04 I never tried. there are not that many windoze-boxes in my network. ;) Apr 07 17:14:56 my wife got a windowz-box, and i want to use the slug as printer-server Apr 07 17:15:09 hmm Apr 07 17:15:15 my slug never came back up Apr 07 17:15:46 bricked? Apr 07 17:15:58 I guess Apr 07 17:16:18 trying to figure out why my serial doesn't work Apr 07 17:20:50 ah Apr 07 17:22:52 well.. I figured out why it didn't work... Kinda. Looks like the cable is broken. The serial kit only gets gnd from the slug ;) Apr 07 17:42:34 hmm... upslug doesn't find my slug Apr 07 17:51:13 Is there a list of what the diff status leds mean? Apr 07 17:54:53 Anyone awake? :) Apr 07 17:57:35 hi Apr 07 17:58:04 nm, just logged in to my slug ;) Apr 07 17:58:47 I just bought mine and is trying to figure out how to put nice stuff on it :) Apr 07 17:58:52 ah Apr 07 17:59:33 do you know if it's possible to download the r25 firmware anywhere? Mine has v29 Apr 07 17:59:38 r29. Apr 07 17:59:50 no idea Apr 07 18:01:25 hmm, IŽll try to se if I can install anyway. Apr 07 18:30:27 any tips for getting JTAG on a budget? Apr 07 18:37:00 Good question. I'd like to know that as well ;) Apr 07 18:38:00 -> #openjtag Apr 07 19:03:36 Has anyone built samba for openslug? Apr 07 19:36:49 NAiL: build yes, running no Apr 07 19:47:06 perlguru: Hmm... Why not running? Apr 07 19:49:36 ouch... That was a *lot* of "nobody cares". There isn't a solution yet, is there? Apr 07 19:49:54 no, not yet Apr 07 22:10:52 03jeanfabrice * 10unslung/ (7 files in 5 dirs): Control files now generated & Makefile WL500G_PACKAGES_JUST_REQUIRING_CONTROL_GENERATION updated Apr 07 22:36:46 03jeanfabrice * 10unslung/Makefile: Resubmitting Makefile to update WL500G_PACKAGES_JUST_REQUIRING_CONTROL_GENERATION Apr 07 23:40:33 03jeanfabrice * 10unslung/ (6 files in 4 dirs): Control file now generated Apr 07 23:42:59 03jeanfabrice * 10unslung/Makefile: Update Makefile WL500G_PACKAGES_JUST_REQUIRING_CONTROL_GENERATION & WL500G_PACKAGES_JUST_REQUIRING_CONTROL_GENERATION for new control files generated packages **** ENDING LOGGING AT Thu Apr 07 23:59:56 2005