**** BEGIN LOGGING AT Wed Sep 07 02:59:56 2005 Sep 07 03:01:45 03hrw 07org.openembedded.dev * r44e8475f... 10/packages/linux/ (2 files in 2 dirs): Sep 07 03:01:45 openzaurus-pxa:ported APM fix from collie kernel Sep 07 03:01:45 - PR changed to r43 - Lineo kernels does not deserve 42 Sep 07 03:01:45 - second fix is not ported as I don't want to dig more in that crap Sep 07 03:15:19 ZiGzAg: I have no idea what you mean by "cdk". Sep 07 03:15:36 cross-compiler :o) Sep 07 03:15:47 so i can cross-compile to arm from i386 Sep 07 03:15:51 look at the wiki for MasterMakefile Sep 07 03:16:16 ah, ok - thanks :) Sep 07 03:21:17 03koen 07org.openembedded.dev * r04029fed... 10/classes/package_ipk.bbclass: classes/package_ipk.bbclass: put HOMEPAGE into the Homepage: control field Sep 07 03:36:15 03koen 07org.openembedded.dev * r8517a140... 10/packages/abiword/ (abiword-2.3.5/cdump-hack.patch abiword_2.3.5.bb): abiword: add 2.3.5 Sep 07 04:27:12 R63 source code is apparently released. Sep 07 04:33:01 not on http://www1.linksys.com/support/gpl.asp yet though... Sep 07 04:34:21 ftp://ftp.linksys.com/opensourcecode/nslu2/2.3R63/NSLU2_V23R63.zip Sep 07 04:35:08 171MB! Sep 07 04:35:51 I wonder if their ftp server is getting a bit of activity now :-) Sep 07 04:36:20 03hrw 07org.openembedded.dev * r90a67b27... 10/packages/ (4 files in 2 dirs): Sep 07 04:36:21 reversed (R)DEPENDS in opie-freetype and opie-ttf-support: Sep 07 04:36:21 - opie-ttf-support does not need opie-freetype to run as it only create fontdir Sep 07 04:36:21 - opie-freetype need opie-ttf-support because it create fontdir for it Sep 07 04:36:23 03hrw 07org.openembedded.dev * r715f4d8c... 10/conf/machine/collie.conf: Sep 07 04:36:23 collie.conf: removed few not needed kernel modules: Sep 07 04:36:23 - registers as it has unknown license Sep 07 04:36:25 - devinfo as /proc/deviceinfo is not needed anymore for SDL Sep 07 04:36:27 - gpio as it is not needed Sep 07 04:36:29 03hrw 07org.openembedded.dev * rdf55dfa1... 10/conf/machine/handheld-common.conf: Sep 07 04:36:31 handhelds-common.conf: removed uinput kernel module Sep 07 04:36:33 - currently only kbdd use it so I add it there Sep 07 04:56:04 03hrw 07org.openembedded.dev * r95ce8a8d... 10/conf/machine/handheld-common.conf: disapproval of revision df55dfa120c7e309713e729dcd552f9e207de952 Sep 07 05:01:06 03koen 07org.openembedded.dev * rd009f64e... 10/packages/abiword/abiword_2.3.5.bb: abiword 2.3.5: add libgnomeprint dependency Sep 07 05:06:11 03koen 07org.openembedded.dev * r2faf6c31... 10/packages/nonworking/freenx/ (16 files): packages/nonworking/freenx/: add freenx suite to nonworking Sep 07 05:16:12 03koen 07org.openembedded.dev * rddbf7177... 10/packages/nonworking/monotone-viz/monotone-viz_0.11.bb: packages/nonworking/monotone-viz/monotone-viz_0.11.bb: add monotone-viz to nonworking till we have a ocaml crosscompiler Sep 07 05:46:18 03mickeyl 07org.openembedded.dev * rc1c5f457... 10/packages/wlan-ng/ (2 files in 2 dirs): wlan-ng-modules 0.2.2: make it work on stoneage kernels Sep 07 06:21:09 03koen 07org.openembedded.dev * rdac5598f... 10/packages/abiword/abiword_2.3.5.bb: Abiword 2.3.5: add libgnmoeprintui dependency Sep 07 06:41:52 03hrw 07org.openembedded.dev * r444d1a1c... 10/packages/libetpan/ (libetpan-0.38/etpan_suffix.patch libetpan_0.38.bb): Sep 07 06:41:53 added libetpan 0.38 - based on patch supplied by Frederic Devernay Sep 07 06:41:53 - this version can be build with GNU TLS so I switched to it Sep 07 06:41:53 - another package does not need OpenSSL Sep 07 06:41:53 - closes bug #304 Sep 07 06:41:55 03koen 07org.openembedded.dev * ra42933a8... 10/packages/abiword/abiword_2.3.5.bb: abiword 2.3.5: add libgsf dependency Sep 07 06:56:27 03hrw 07org.openembedded.dev * r120e5d12... 10/packages/gnutls/ (3 files in 2 dirs): added gnutls 1.0.25 Sep 07 07:06:14 03koen 07org.openembedded.dev * r301eec9b... 10/packages/gaim/gaim_2.0.0-cvs-mco1.bb: gaim 2.0: s/PV/PN/ in cvsdate Sep 07 07:16:08 03koen 07org.openembedded.dev * r5302bee6... 10/conf/distro/preferred-gpe-versions-2.7.inc: conf/distro/preferred-gpe-versions-2.7.inc: update gaim PV Sep 07 07:41:19 03mickeyl 07org.openembedded.dev * r692e8d4a... 10/conf/machine/tosa-2.4.conf: tosa-2.4.conf: stoneage kernels need orinoco 0.13e Sep 07 09:05:13 NAiL: icecast is in both the non-broken and the broken packages, and it is broken. Sep 07 09:06:41 (There might be an update of course - haven't checked because I'm trying to get it to build...) Sep 07 09:09:29 ah, it should be in broken only Sep 07 09:09:40 It uses libs from /usr/lib if it finds them Sep 07 09:26:17 03nail 07org.openembedded.dev * r1776da2d... 10/packages/meta/openslug-packages.bb: openslug-packages: Remove duplicate icecast. It should only be in BROKEN, since it currently is. Sep 07 09:28:45 I'm hitting problems with iptables too - missing 'iptables.h' on a from-clean openslug build. For the moment I'm just skipping it. Sep 07 09:28:57 that's odd Sep 07 09:29:10 It built for me a couple of days ago Sep 07 09:29:12 did a clean build Sep 07 09:31:12 It might be a glitch on my system - it seems to have some intermittent 'file disappears' or 'file changes' error. Sep 07 09:31:46 jbowler, I am having the same problem with my build system. Sep 07 09:32:56 Mine is gentoo/Linux/reiserfs using ccache - it might be ccache or it might be Linux (2.6.13-rc4) Sep 07 09:33:25 gentoo/linux/ext3 Sep 07 09:33:36 ... I should move to 2.6.13 release... Sep 07 09:33:43 2.6.10.5-amd64 Sep 07 09:33:52 ka6sox: do you use ccache, do you run builds in parallel? Sep 07 09:33:52 ubuntu/ext3 Sep 07 09:34:06 ccache yes Sep 07 09:34:15 and yes builds in parallel Sep 07 09:34:36 no JIT however Sep 07 09:34:50 // builds will sync up, ccache will end up compiling the same file in both threads and then it fails. Sep 07 09:35:06 ugh Sep 07 09:35:50 I don't know if it's really a ccache bug or whether it exposes some Linux FS problem Sep 07 09:37:14 interesting. Sep 07 09:41:28 havent tried that yet. Sep 07 09:42:16 off ot the mine. Sep 07 09:43:29 jbowler, I like the idea of stealing resources from the Mini... Sep 07 09:46:10 ka6sox: did you have any success with upslug2 on your Mac? Sep 07 09:47:43 no, it doesnt' crash but doesnt' discover any slugs either. Sep 07 09:48:54 Does 'upslug2' exit ok with a 'can't find any slugs' message, or does it just hang? Sep 07 09:49:08 can't find any slugs Sep 07 09:50:54 Hum. Ok, it's probably going to be necessry to build with CXXFLAGS=-g and gdb it... Sep 07 09:51:07 I was thinking that too. Sep 07 10:01:17 03jbowler 07org.openembedded.dev * rb532e7ba... 10/packages/uclibc/uclibc-0.9.28/ucslugc/uClibc.config: Sep 07 10:01:17 uclibc: ucslugc config 0.9.28 updated Sep 07 10:01:17 The config now sets the processor option to XScale, correct for ucslugc Sep 07 10:01:17 (which is NSLU2) Sep 07 10:01:21 03jbowler 07org.openembedded.dev * r5d9c9e1e... 10/packages/binutils/ (3 files in 2 dirs): (log message trimmed) Sep 07 10:01:22 binutils: patch 2.16 for uclibc, enable 2.16 on uclibc builds Sep 07 10:01:22 2.16 now includes the patches which ensure that HOST_CC_ARCH is passed to Sep 07 10:01:23 the build, other than that this commit should only affect binutils for Sep 07 10:01:25 linux-uclibc targets. The patches which enable recognition of Sep 07 10:01:28 linux-uclibc*' as well as 'linux-gnu*' have integrated - in fact there are Sep 07 10:01:30 more places now where the change is made, which may improve some things. Sep 07 10:46:29 03mickeyl 07org.openembedded.dev * r51632691... 10/packages/angstrom/ (angstrom-bootmanager-image.bb angstrom-bootmanager.bb): angstrom: add preliminary build files for bootmanager and bootmanager-images Sep 07 11:11:14 03jbowler 07org.openembedded.dev * r233aad18... 10/packages/netpbm/netpbm_10.28.bb: Sep 07 11:11:15 netpbm: partial fix to the perl module dependencies Sep 07 11:11:15 The package now has a reduced list of perl module dependences, however Sep 07 11:11:15 some indirect dependencies are still necessary because of errors in the Sep 07 11:11:15 perl modules themselves. Sep 07 12:21:11 03jbowler 07org.openembedded.dev * r0e717bbd... 10/packages/iptables/iptables_1.3.3.bb: Sep 07 12:21:11 iptables: fix the do_install step Sep 07 12:21:11 do_install will re-run the compile on some systems because of make time Sep 07 12:21:11 stamp problems, so it needs the same environment as do_compile Sep 07 12:26:00 anyone using a cellphone datacable for serial console access? Sep 07 12:26:24 ys Sep 07 12:26:29 yes, even Sep 07 12:26:46 I am Sep 07 12:26:48 I've got 9 of 'em or so Sep 07 12:26:53 5 here Sep 07 12:27:19 I just hooked a siemens S55 datacable to the ds101g+, but only rx seems to work... Sep 07 12:27:45 dunno that particular cable. Sep 07 12:27:50 besides gnd, tx and rx the cable also provides cts, rts and dcd Sep 07 12:27:50 but they mostly work... Sep 07 12:27:55 cool Sep 07 12:28:05 could this be part of the problem? Sep 07 12:29:01 shouldn't be Sep 07 12:29:47 hmmm.... is it possible that the TX-part of the hardware is broken? Sep 07 12:29:49 most all cellphone cables have cts, rts, but nothing on a nslu2 to plug those into Sep 07 12:30:18 you're talking about TXing to the ds101g+? Sep 07 12:30:37 no, the g+ TXing to the PC Sep 07 12:31:04 I can TX from the PC to the G+ though... Sep 07 12:31:29 k, so how do you know? Sep 07 12:31:52 if the g+ is Txing to pc, you see stuff... Sep 07 12:31:55 because when i blindly type in something, i then see a login process on the box with the typed characters (it treats it as the username) Sep 07 12:32:07 ah Sep 07 12:32:16 but I don't see anything that the g+ transmits :-( Sep 07 12:32:42 I had the opposite problem... but then again I think I blew the Rx pin on the IXP of that particular nslu2 Sep 07 12:32:59 how would you do that? Sep 07 12:33:12 blew it electrically? Sep 07 12:34:06 in my case, solder sucking left a mess that I evidently neglected to clean up - and I must have shorted the Rx pin Sep 07 12:34:21 at least long enough that Rx never worked thereafter Sep 07 12:34:29 this is a serial with a dongle? Sep 07 12:34:59 huh? I don't understand... Sep 07 12:36:35 asking if it has the "blob" in the middle that houses a PL2303 chip Sep 07 12:37:17 mcdmx, any chance you can take closeups of the Flash and Ethernet area? Sep 07 12:37:30 (2 separate pix) Sep 07 12:37:34 i didn't take it apart... Sep 07 12:37:41 oh. Sep 07 12:37:57 there is a pretty high-res image already in the wiki... that's not enough? Sep 07 12:37:59 who was it who changed out the fans? Sep 07 12:38:16 conradl Sep 07 12:38:20 got it. Sep 07 12:38:24 is it noisy? Sep 07 12:38:33 yes Sep 07 12:38:59 wonder why it needs a fan and the other one doesn't. Sep 07 12:39:17 me too... Sep 07 12:39:39 when mine arrive I'll take out the temp probe and find out. Sep 07 12:39:52 the one thing that really gets hot is the drive, but this is the case for the fanless one also. Sep 07 12:40:07 the ppc cpu also gets much warmer then the xscale Sep 07 12:40:21 I know this may be a noob question but, I modified a module in the kernel dir on my build system. How do I re-run 'make build-openslug' to pick up the change? Sep 07 12:40:25 I have a cpu cooler. Sep 07 12:40:44 did you alter the defconfig too? Sep 07 12:41:14 defconfig??? Sep 07 12:41:35 for the kernel. Sep 07 12:41:59 i took the .config from syno... Sep 07 12:42:12 didn't build a complete kernel yet, but was able to build and run the TUN module Sep 07 12:42:16 mcdmx, if your cable has the PL2303, use a multimeter and check the pinouts vs. pads used for the Rx and Tx Sep 07 12:42:43 supergerg, that question about defconfig was for you. Sep 07 12:43:30 ByronT: sorry, i'm not an electrical engineer... (but i have a multimeter). can you explain this a little more detailed? Sep 07 12:43:38 ahh...no I only modified one file, kaweth.c. Where is defconfig? Sep 07 12:44:14 its in the kernel section Sep 07 12:44:26 find will find it. Sep 07 12:44:51 you might have to wipe out the temp dir for the kernel so that it rebuilds it. Sep 07 12:44:55 mcdmx, if your cable has the blob in the center - housing a PL2303 - then you can d/l the Prolific app notes - and determine which pins on the chip are Rx and Tx (Tx is 1 and Rx is 5, IIRC) Sep 07 12:45:28 ByronT: the blob is built into the RS232 plug... Sep 07 12:45:55 then using a multimeter make sure that your cable shows no resistance between pin 5 and the pin that you are plugging into the ds101g+ for Rx Sep 07 12:46:49 ByronT: pin 5 on the rs-232 plug? Sep 07 12:47:09 pin 5 of the PL2303 chip Sep 07 12:47:49 ok, i wil then have to break up the rs232-plug... Sep 07 12:47:50 not sure what Rx is on the rs-232 or for that matter, what is Rx on the ds101g+ Sep 07 12:48:24 sorry about that, where is defconfig? Sep 07 12:48:24 if you want to send my a ds101g+, I'll be happy to test for you (and keep.... ;) ) Sep 07 12:49:04 openslug/unslung? Sep 07 12:49:05 ByronT: sorry but it's not my own... I'm breaking other peoples property currently... Sep 07 12:49:09 openslug Sep 07 12:49:32 tell them you need more and you need help! (which I'm willing to provide.....) Sep 07 12:49:50 I got a sugar daddy to buy me 2 Sep 07 12:51:25 ByronT: nice try ;-) Sep 07 12:52:17 supergerg79, okay you will just need to use the find util...my machine is down right now. Sep 07 12:52:41 ka6sox: okay, but what do I do with that file? Sep 07 12:53:13 see if your module is listed in there and that its enabled. Sep 07 13:12:12 ka6sox: the module is in the defconfig file. I ran 'make build-openslug' and now everytime I re-run this make it does not re-create any packages I have modified. Do I have to clean out the tmp dir? Sep 07 13:12:33 yes Sep 07 13:12:38 supergerg, yes you do. Sep 07 13:12:50 otherwise it thinks its built Sep 07 13:13:38 ByronT: mcdmx I think you guys are talking about apples and oranges. Sep 07 13:14:27 in that case, I'm talking about apples Sep 07 13:15:24 ok Sep 07 13:15:31 okay thanks let me try that Sep 07 13:19:46 Anyways, if mcdmx has a RS232 connection on one side, theres little chance that the dongle has a PL2303 in it. Sep 07 13:21:18 but the file I modified is in the ~/devel/slug/openslug/tmp/work/openslug-kernel-2.6.12.2-r14/linux-2.6.12.2/drivers/usb/net directory. If I clean out the tmp directory my changes will be lost. What directories under tmp do I have to clean out so that the module is re-built? Sep 07 13:21:26 again sorry for the noob questions Sep 07 13:24:34 Theres a wiki page for this. Sep 07 13:24:38 lemme find it Sep 07 13:25:05 http://www.nslu2-linux.org/wiki/HowTo/TweakKernelOrPackagesInOE Sep 07 13:25:37 * ka6sox-office slaps forehead (gently) Sep 07 13:26:21 dyoung: thanks for the link..looks like what I'm looking for Sep 07 14:01:11 03justinp 07org.openembedded.dev * r2c520cd8... 10/packages/gcc/gcc_3.4.4.bb: gcc_3.4.4: add DEFAULT_PREFERENCE_arm-linux to replace same removed from gcc_csl Sep 07 14:02:43 how do I go about getting my changes of a kernel module checked into CVS? Sep 07 14:03:33 are you an OpenSlug developer? Sep 07 14:03:48 no Sep 07 14:05:06 I was just reading the wiki, I guess I need to send an e-mail requesting CVS write access Sep 07 14:05:27 kernel for OE is in Monotone. Sep 07 14:05:36 er for Openslug Sep 07 14:06:26 ahh..who do I talk with to get write access to Monotone? Sep 07 14:06:55 include your patch and a summary of what it does too Sep 07 14:08:29 supergerg, send the email but requesting access to Monotone. Sep 07 14:08:45 include the patch and the summary per dyoung Sep 07 14:09:08 okay I'll do that.. thanks again Sep 07 14:16:04 03justinp 07org.openembedded.dev * r58b70d44... 10/packages/gcc/gcc-cross_3.4.4.bb: gcc-cross_3.4.4: add DEFAULT_PREFERENCE_arm-linux Sep 07 14:45:54 getting monotone access is not as easy as getting CVS access ... Sep 07 14:46:37 (cause you need to be recognised in #oe too, cause we are using their repo and it is a web of trust) Sep 07 14:47:19 So just send the patch to the nslu2-developers list and the openslug release manager will apply it. Sep 07 15:01:17 03mickeyl 07org.openembedded.dev * rd4055289... 10/packages/efl/ (ecore-fb_20051007.bb evas-fb_20051007.bb): efl: add cvs versions for ecore-fb and evas-fb Sep 07 15:13:08 question to ipkg experts: the openssl-ipk contains an empty directory "/var/empty" but somehow, this directory will not be created when I install the package. Must empty directories be created using postinst? Sep 07 15:17:24 yep Sep 07 15:17:37 tnx! Sep 07 15:46:58 03mcdmx * 10unslung/ (make/openssh.mk sources/openssh/control): Sep 07 15:46:59 openssh: switched to dynamically generated ipk control file, remove man pages from package, bump up ipk version Sep 07 15:46:59 - this change allows building openssh for non-armeb architectures Sep 07 15:49:58 03mcdmx * 10unslung/Makefile: optware: Add openssh to the list of packages for the DS-101g+ Sep 07 16:36:14 03justinp 07org.openembedded.dev * ra1e17a5d... 10/ (3 files in 2 dirs): gcc-3.4.4, openzaurus-3.5.4: remove DEFAULT_PREFERENCE from gcc bb files and use PREFERRED_VERSION in openzaurus conf to force use of gcc 3.4.4 Sep 07 23:46:52 hi ppl;) Sep 07 23:47:15 monotone: misuse: branch org.openembedded.dev has multiple heads Sep 07 23:47:45 monotone co -b org.openembedded.dev openembedded => monotone: misuse: branch org.openembedded.dev has multiple heads Sep 07 23:48:03 monotone 0.22 Sep 08 00:37:46 Tuborg, try again. Sep 08 00:38:04 if thats the same result then you need to try to merge Sep 08 00:52:05 monotone co -b org.openembedded.dev openembedded => monotone: misuse: branch org.openembedded.dev has multiple heads Sep 08 00:52:18 How can I merge? Sep 08 00:53:43 its in the monotone instructions. Sep 08 00:55:39 thx Sep 08 01:54:37 hi Sep 08 01:55:02 i try to build openslug-2.5 and got following error whild building icecast Sep 08 01:55:07 /usr/lib/libxml2.so: could not read symbols: File in wrong format Sep 08 01:55:22 i think libxml2.so should not be read from /usr/lib Sep 08 01:55:47 did i something wrong or is the makefile of icecast wrong here? Sep 08 02:12:37 in src/Makefile the parameter "AM_LDFLAGS = -L/usr/lib" is set, i have set it like "AM_LDFLAGS =" and its working now Sep 08 02:14:18 locate libxml2.so Sep 08 02:15:17 libxml2.so is in the staging directory Sep 08 02:15:32 but AM_LDFLAGS seems to be used before LDFLAGS Sep 08 02:15:49 so /usr/lib/libxml2.so will be found before the lib in the staging dir **** ENDING LOGGING AT Thu Sep 08 02:59:56 2005