**** BEGIN LOGGING AT Tue Nov 22 02:59:57 2005 Nov 22 03:17:45 with upslug2 Nov 22 03:18:37 yes i have found a clue. Nov 22 03:19:00 during the process it make a openslug-image-XX and apparently not a ucslugc-image-XX Nov 22 03:19:39 how i can force the build of the ucslugc-image-1.0-r0 ? Nov 22 03:20:36 iirc, there have been some changes to how that is done lately, so I'm not sure Nov 22 03:21:45 I can find, in the .bb ucslugc-image.bb Nov 22 03:21:53 DEPENDS = openslug-image Nov 22 03:22:07 and this is ok. Nov 22 03:22:34 It completes the openslug-image but does'nt pass to ucslugc-image ? Nov 22 03:23:31 andreaf: ucslugc specifically does not create an image Nov 22 03:23:36 openslug specifically does Nov 22 03:24:10 you can change that for ucslugc - look in ucslugc.conf and there are comments there (the comments may be in one of the files that ucslugc.conf includes. Nov 22 03:24:17 and i have to flash with upslug2 separately ? Nov 22 03:24:45 thanks ? i look there... Nov 22 03:25:26 if you don't create a .bin, then you have to use upslug2 Nov 22 03:26:18 ok, understood Nov 22 03:26:46 if I can ask another question. How i can compile only a single package ? Not all the packages ? Nov 22 03:28:36 cd ucslugc ; source setup-env ; bb Nov 22 03:28:51 please update the wiki with these questions and answers Nov 22 03:29:25 ok. Nov 22 03:35:07 ok, added a brief note/faq for this command. Nov 22 03:35:12 does anyone have the faintest idea why my zd1211 dongle has stopped working? It associates with the AP, but when I try to aquire an addr through DHCP, it disconnects. Nov 22 03:35:23 please check if is correct. Nov 22 03:37:04 bbl Nov 22 03:37:14 andreaf: thx Nov 22 03:38:05 rwhitby-away: the configuration files in uclugc/conf are the same of the openslug/conf directory (are links)... Nov 22 03:39:14 openembedded/conf/distro/ucslugc.conf Nov 22 03:39:28 ops sorry. Nov 22 03:47:35 added a note about the use of uplug2 for ucslugc Nov 22 04:13:29 * andreaf is flashing his slug with ucslugc firmware... crossing the finger Nov 22 04:27:52 andreaf: did it work out? Nov 22 04:28:35 yes, It worked. Now i'm fighting against the usb stick (for a new root fs) Nov 22 04:31:25 there is a little """"bug""". The feed in the config of ipkg are in the new model (slugos-btu) but on the ipkg repository are in the old... Nov 22 04:33:40 yeah Nov 22 04:33:57 now that I'm getting back online, it's time for me to fix the feeds Nov 22 04:35:41 installing the ext2 module... Nov 22 04:40:54 how i can mount as loop a .jffs2 file ? Nov 22 04:41:49 I have some problems with the standard mode (mtdblock , etc. ) Nov 22 04:43:15 never tried, but afaik you need to use the mtdram module. ask google Nov 22 04:43:39 thanks for the tip Nov 22 06:41:01 re Nov 22 07:35:58 03hrw 07org.openembedded.dev * rf46d15ed... 10/packages/ (4 files in 2 dirs): Nov 22 07:35:58 yamonenv, nylon-scripts, nylon-statistics, logrotate-script: fixed SRC_URI Nov 22 07:35:58 - this fixes #168 Nov 22 07:57:32 hi, in the ucslugc image there is a kernel panic if i do the following command: Nov 22 07:57:37 modprobe netconsole netconsole Nov 22 07:59:27 kernel version 2.6.14 Nov 22 08:00:53 03hrw 07org.openembedded.dev * r8a8c054f... 10/packages/dbh/dbh_1.0-18.bb: dbh: fix problem with linking - patch by Guillermo Juárez - close #394 Nov 22 08:06:00 03hrw 07org.openembedded.dev * rd6941ce1... 10/packages/sudo/ (sudo_1.6.8p8.bb sudo_1.6.8p12.bb): Nov 22 08:06:00 sudo: upgrade to 1.6.8p12 due to CVE-2005-1993 Nov 22 08:06:00 - Race condition in sudo 1.3.1 up to 1.6.8p8, when the ALL pseudo-command is Nov 22 08:06:00 used after a user entry in the sudoers file, allows local users to gain Nov 22 08:06:00 privileges via a symlink attack. Nov 22 08:06:01 - Thanks to Jamie Lenehan for notice Nov 22 08:06:03 - close #486 Nov 22 08:15:13 Hi *, i'm trying to boot a ucslugc installation from a usb memstick. Nov 22 08:16:12 the disk is correctly inizialized with turnup memstick -i /dev/sda1 Nov 22 08:17:01 and the linuxrc is apparently ok. But at the reboot the sistem continue to start on the flash Nov 22 08:17:13 there is not console cable, so i can't see the log Nov 22 09:33:49 03azummo * 10nas100d/kernel/2.6.15/60-nas100d-i2c.patch: fixed chip detection. Nov 22 11:25:58 03jbowler 07org.openembedded.dev * rac042169... 10/packages/linux/ (nslu2-kernel_2.6.15-rc1.bb nslu2-kernel_2.6.15-rc2.bb): nslu2-kernel: release 2.6.15-rc2 Nov 22 11:57:46 hello all Nov 22 11:58:04 I have stability problems with my slug... some questions Nov 22 11:58:30 i have to slugs, with the same software setup they are both unstable, so I assume the reason is not the slug itself... Nov 22 11:58:44 it might be however the usb-drive... Nov 22 11:59:13 joschi_, unslung/openslug/debonaras ? Nov 22 11:59:20 openslug 2.7 Nov 22 11:59:57 coul you define unstable, please Nov 22 12:00:07 s/coul/could Nov 22 12:00:09 a general question: could it be that i run out of memory, even if i have lots of swap available? Nov 22 12:01:57 if you didn't run swapon, maybe Nov 22 12:02:11 i did run it, or better it is in fstab Nov 22 12:02:17 and free shows it is on Nov 22 12:02:19 :) Nov 22 12:02:43 a lot of swap = 200Meg ;) Nov 22 12:02:49 so, what is your definition of unstable ? Nov 22 12:02:52 ok... Nov 22 12:03:25 unstable means that it doesn'r react after a while of running under heavy load Nov 22 12:03:33 not react = no reaction over network Nov 22 12:03:49 sometimes even the powerbutton does give a beep is it does otherwise Nov 22 12:03:59 s/does/doesn't/ Nov 22 12:04:19 s/is/as Nov 22 12:04:26 i should better learn typing :( Nov 22 12:05:05 heavy load means proc load, or net load? Nov 22 12:05:51 hm, netload in term that there are lots of connections, but not so high data rates ;) Nov 22 12:06:42 "a while running" might well be 5 to 10 hours... that makes it so difficult to reproduce :-/ Nov 22 12:07:27 could I do something that I can see a potential kernel panic via SSH? Nov 22 12:07:44 or do i need a serial cable? Nov 22 12:08:17 maybe that netconsole can help you, dunno Nov 22 12:08:28 netconsole? Nov 22 12:09:26 ah :) Nov 22 12:09:37 afair, netconsole is a tool to bring dmsg output to the network Nov 22 12:09:56 i found something on the wiki, i'll have a look, thanks so far Nov 22 12:10:24 if you in suspicion, that there are memory problems, than you should install sysstat Nov 22 12:10:37 "This means that if OpenSlug dies (this is a beta release) with a kernel panic it is possible to see what happened" Nov 22 12:10:53 aja Nov 22 12:11:44 I though of memory problems because i have a bunch of services running, i though there might be parts that can't be swapped and cause the physical ram to get full... Nov 22 12:11:57 but i don't know if such a problem exists under linux? :) Nov 22 12:12:30 dunno, but sysstat is the right tool, to find it out Nov 22 12:14:26 day before yesterday, i tried to compile mono, a this time the slug runs with a load between 5 and 9, and running out of swap, but still responds to ssh, so i think it's stable (running debonaras with the same kernel as openslug 2.7) Nov 22 12:15:15 hm, ok... Nov 22 12:15:30 do u know what are the restrictions for concurrenct network connections? Nov 22 12:15:35 or are there any? Nov 22 12:16:59 i don't have a clue Nov 22 12:17:17 k, thanks! i'll try netconsole Nov 22 12:17:33 there *HAS* to be a kernel panic ;) Nov 22 12:51:05 03jbowler 07org.openembedded.dev * r7027b222... 10/packages/ntp/ntp_4.2.0.bb: Nov 22 12:51:05 ntp: fix crash in 4.2.0 Nov 22 12:51:05 - Remove gcc4.patch which causes a crash immediately after: Nov 22 12:51:05 - refclock_receive: at 2 127.127.1.0 Nov 22 12:51:05 - because the clktypes array in clocktypes.c is incorrectly initialised, Nov 22 12:51:06 - see the compiler warning messages (from gcc 3.3.4). Nov 22 12:51:08 03jbowler 07org.openembedded.dev * r57be2e37... 10/packages/cherokee/ (5 files in 2 dirs): Nov 22 12:51:10 cherokee: release 0.4.29 Nov 22 12:51:12 - this release works with patches to classes/base.bbclass oe_libinstall Nov 22 12:51:14 - to install libpcre.la in staging with 'installed=no', otherwise the Nov 22 12:51:16 - package will fail to compile. The commit does not include the bbclass Nov 22 12:51:18 - fixes (they require more testing) - to use it hand hack libpcre.la in Nov 22 12:51:20 - the staging directory. Nov 22 14:08:46 stupid question #12897345: What is the biggest value unsigned Integer value I can get in GCC? is the unsigned long the longest? If so what is max value? Nov 22 14:09:23 Isn't that kinda decided by arch/os? Nov 22 14:09:49 but my guess that unsigned long is 4 bytes Nov 22 14:10:33 run a configure-script... it usually outputs the size of various ints ;) Nov 22 14:11:37 well, I'm using Openslug. Nov 22 14:12:39 I'm having a hard time calculating the standard deviation of a bunch of pixels in an image in my robot code because the square of the sum gets pretty big and seems to overflow the var. Nov 22 14:13:05 ah Nov 22 14:13:30 for example: one such sum is 186448 so once squared I get 34762856704. Nov 22 14:13:47 And I think that overflows my var. Nov 22 14:13:59 I tried different types but without success. Nov 22 14:14:24 2^32 should give us like 4G... Nov 22 14:14:49 so I guess I would need more than 32bits. Nov 22 14:16:42 I'm using the raw score standard deviation method which works better with running sum but has that issue with large sums of pixels. Nov 22 14:17:09 Otherwise I'd have to use the standard SD method which would require two passes. = BAD! Nov 22 14:17:22 is double long a valid type? Nov 22 14:17:26 Have you searched for any high-precision math libraries? They might be more efficient than floating point in software. But first see if gcc on the slug supports "long long" Nov 22 14:18:43 I'd rather stay away from such libs as I only need minor fp support as it's slow as hell. I just want a large integer type which will get reduced once I call sqrt() Nov 22 14:18:55 I'll try long long. thanks. Nov 22 14:21:54 sizeof(long long) returns 8 bytes so it looks like it will work. Nov 22 14:23:05 Be aware that it'll be slower Nov 22 14:23:28 Ok - but watch the math functions; I expect the gcc and libc were run against the test suites at some point, but in my experience the 64bit integer math stuff isn't well tested (although my experience is some years dated). Good luck! Nov 22 14:24:21 Tiersten, yeah, that's what I'm afraid. Especially in a vision loop. I guess I'll have my AI code only get stats sporadictly. Nov 22 14:25:13 mwester, Thanks for the warning. I'll see if it corrects my problem and perhaps I'll look into the 2-pass SD method after to see if it's a low slower. Nov 22 14:26:32 You're not going to win either way then. Using floating point would be even slower Nov 22 14:27:17 well, I have to use fp either way for the actual SD value but perhaps I'll optimize it later using fixed point arithmetic. Nov 22 14:27:34 I might not even need SD stats later anyways. Nov 22 14:27:54 I'm using it to adaptively adjust the segmentation threshold in my CV lib. Nov 22 14:34:47 damn, it doesn't seem to work. I'll have to play with it more. Nov 22 18:07:05 03florian 07org.openembedded.dev * r2d9229c5... 10/packages/matchbox-panel/ (matchbox-panel.inc matchbox-panel_0.9.2.bb): Add latest integral version to list of devices using small icons. Nov 22 18:07:08 03florian 07org.openembedded.dev * r568e4947... 10/packages/libeventdb/libeventdb_0.17.bb: libeventdb: Add new release 0.17 using autotools. Nov 22 18:07:11 03florian 07org.openembedded.dev * r5cfa5553... 10/packages/libgpevtype/libgpevtype_0.13.bb: libgpevtype: Add new release 0.13. Nov 22 18:07:14 03florian 07org.openembedded.dev * rb4f7537d... 10/packages/gpe-calendar/gpe-calendar_0.66.bb: gpe-calendar: Add new release 0.66. Nov 23 00:16:47 03jbowler * 10upslug2/ (8 files): upslug2-11 - attempt to fix the libpcap operation Nov 23 00:40:57 03jbowler 07org.openembedded.dev * r8bd89f85... 10/ (5 files in 4 dirs): (log message trimmed) Nov 23 00:40:57 base.bbclass: attempt to fix the staging .la problem Nov 23 00:40:57 - when using oe_libinstall to install a libtool library (.la file Nov 23 00:40:57 - present) into the staging directory (${STAGING_LIBDIR}) fix up the Nov 23 00:40:57 - installed .lai file so that it contains 'installed=no' - this Nov 23 00:40:57 - prevents libtool from subsequently using a copy of the build system Nov 23 00:40:59 - library if it exists in the final (target) installation directory Nov 23 00:42:00 ACTION  Nov 23 01:02:22 ~weather enva Nov 23 01:02:26 Trondheim / Vaernes, Norway; (ENVA) 63-28N 010-56E 17M; last updated: 2005.11.23 0720 UTC; Dew Point: 37 F (3 C); Pressure (altimeter): 30.27 in. Hg (1025 hPa); Relative Humidity: 93%; Sky conditions: mostly cloudy; Temperature: 39 F (4 C); Visibility: greater than 7 mile(s); Wind: from the ESE (110 degrees) at 6 MPH (5 KT) Nov 23 01:20:29 03rwhitby * 10nas100d/kernel/ (4 files in 2 dirs): Updated to 2.6.15-rc2 Nov 23 01:25:59 03rwhitby 07org.openembedded.dev * r655c27b2... 10/packages/linux/ (5 files in 2 dirs): nas100d-kernel: Updated for 2.6.15-rc2 Nov 23 02:06:10 hi * Nov 23 02:06:26 may i ask some questions about ucslugc use ? Nov 23 02:07:08 hi I compiled and installed the ucslugc image in my slug **** ENDING LOGGING AT Wed Nov 23 02:59:56 2005