**** BEGIN LOGGING AT Tue Mar 14 10:59:57 2006 Mar 14 11:00:24 anyone else having trouble compiling the file-native .bb package in the latest openembedded head? I just want to check before I nuke my tmp folder... Mar 14 11:05:15 hanjo, easiest fix is to blow away the tmp directory Mar 14 11:05:28 you might be able to remedy it by removing the native file. Mar 14 11:05:39 tmp/cross/bin/file Mar 14 11:06:50 grr Mar 14 11:06:52 openslug/tmp/staging/i686-linux/bin/file I mean Mar 14 12:12:59 dyoung: Looking at the makefile, it is using "openslug/tmp/work/file-native-4.16-r1/file-4.16/src/file" and not the one in staging. Looks like there is an error in the magic file that is created from the Magdir snipets. Anyone else having this problem? Mar 14 12:24:26 Yes I know; but problem isi caused by the one in staging. Mar 14 12:24:43 according to the #oe folk at least. Mar 14 12:25:14 anyways, supposedly that will fix it, for myself I fixed it by blowing away tmp Mar 14 12:25:21 (laziness) Mar 14 12:31:23 :) Mar 14 12:31:23 ok Mar 14 12:31:28 I'll try the same Mar 14 12:31:45 I've tried just removing the one in staging but no luck Mar 14 12:41:59 ok, I'm absoultely sure that blowing away tmp makes it all better. :-) Mar 14 12:43:48 :) correct. file-native just compiled without problems Mar 14 19:03:50 Hi folks. I tried to enhance the swapspace on my slug (http://www.nslu2-linux.org/wiki/HowTo/AddAdditionalSwapSpace), but when I ran the command 'swapon /yourpath/swapfile1' I got the reply 'swapon: swapon: Invalid argument'. What's up with that...? Grateful for any help! Mar 14 19:05:37 did you mkswap the file? Mar 14 19:06:00 Nope, as a good lad I followed the instructions in the WIKI to a 110%! Mar 14 19:06:25 My linux is rather basic...what should I do? Mar 14 19:07:46 well... i just did set it up Mar 14 19:07:54 i did Mar 14 19:08:07 dd if=/dev/zero of=/tmp/swapfile bs=1024k count=20 Mar 14 19:08:16 yep, that I did Mar 14 19:08:16 this creates a 20mb file Mar 14 19:08:26 then i did mkswap /tmp/swapfile Mar 14 19:08:36 and finally swapon /tmp/swapfile Mar 14 19:08:48 ah, missed that one. but it ain't in the wiki, so i guess i'll have to add a comment Mar 14 19:08:59 thx, mate, for your help Mar 14 19:09:05 just put it there :) Mar 14 19:09:09 no prob Mar 14 19:09:55 one more quiestion - would the mkswap-command also have to be put in a system init-file, or is it a one time-command? Mar 14 19:09:55 you can check the swap by doing cat /proc/swaps Mar 14 19:10:12 you need to do this once Mar 14 19:10:30 ok, so it's enough to have the swapon-command in a SXXswap-file Mar 14 19:10:52 you have to change your /etc/fstab to automatically activate your swap on boot time Mar 14 19:11:11 make sure you put it at the end of the file :) Mar 14 19:11:35 more stuff i've missed...! what should be put in the fstab-file, then? Mar 14 19:12:10 http://www.redhat.com/docs/manuals/linux/RHL-8.0-Manual/custom-guide/s1-swap-adding.html (it's at the bottom of the page) Mar 14 19:12:53 OK, I'll have a peek at it. Thx for your help. Mar 14 19:13:03 no prob Mar 14 19:32:32 small addendum/correction. obv. the slug overwrites the fstab at boottime. but a system init-file does just the trick, and everything is peachy right now. thx again for your help! Mar 14 20:13:02 Caramba_ this depends on what kind of os you're running on the nslu2 Mar 14 20:19:45 fair enough - this is unslung Mar 14 20:22:40 you gonna have to put some "diversion" script somewhere on the disk i think. i don't have experience with that. i'm using debianslug and openslug :-) Mar 14 20:23:28 EvilDevil, ref. debianslug, are you running etch ? Mar 14 20:33:13 pepijn, nope, sid Mar 14 20:50:13 is there a special channel for questions regarding building UcSlugC Images? Mar 14 20:52:29 - Uncomment the first line of /etc/inittab to disable syslog - should that be comment? Mar 14 21:19:51 evildevil, also ok, running sysklogd or syslog-ng ? Mar 14 21:21:20 syslog-ng Mar 14 21:21:26 good... Mar 14 21:21:49 i upgraded my syslog-ng yesterday, but it is misbehaving Mar 14 21:21:56 i have it logging my VoIP box, my router and my dbox ;) Mar 14 21:22:00 are you having problems? Mar 14 21:22:06 is anything logged? Mar 14 21:22:15 it looks like some logfiles aren't updated anymore Mar 14 21:22:27 dbox :D Mar 14 21:24:09 you know the dbox? you must be from somewhere around here ;) Mar 14 21:24:38 i have a dreambox 500 and build my own image Mar 14 21:24:58 that is actually how i found out about the NSLU2 and the WRT54GL ;) Mar 14 21:26:23 me too :) i first bought the dbox, then the nslu2 and some months later the wrt54g v3.1 Mar 14 21:30:15 but back to the syslog-ng issue... just want to know if i am the only one Mar 14 21:30:32 what issues? Mar 14 21:30:41 for me it does not log at all Mar 14 21:30:49 it starts, but hangs Mar 14 21:31:14 tried starting it with only parsing config, but also then it hangs Mar 14 21:31:34 strace shows it hangs on a poll( Mar 14 21:39:54 no clue :/ Mar 14 21:40:00 :( Mar 14 21:40:09 reinstalled it? Mar 14 21:40:16 but it is doing something for you? Mar 14 21:40:17 yep Mar 14 21:41:09 hey, i'm owner of NSLU (2x) , WRT54GS and Dbox (2x), too :-) Mar 14 21:41:36 WRT54GS pre v5, i assume ;) Mar 14 21:42:11 i tried to get my hands on a v3 (more memory) but they did not want to open the package Mar 14 21:42:22 Version: 1.9.9-1 syslog-ng Mar 14 21:42:39 yes, that is the one in testing/unstable Mar 14 21:42:57 pepijn there's a serial no somewhere on the package. you can use this one to find out the version Mar 14 21:43:36 well, bought a 54GL instead Mar 14 21:45:27 hardware is orginal and fw is dd-wrt v23 Mar 14 21:45:58 not openwrt ? Mar 14 21:48:38 no, i tried to use wds with ddwrt to connect to my fritz!box router, but works only with wep-security and so i use it as wlan-client (with WPA) Mar 14 21:49:24 do nothing else with it Mar 14 21:50:17 i have one as my firewall (with shorewall + openswan) and one as a client to connect the dreambox/ps2 to the net Mar 14 21:50:42 mine works as a stupid wds-repeater (with a t-sinus 1054) and snmpd Mar 14 21:51:28 EvilDevil: wep or wpa-security? Mar 14 21:51:48 hmmm... took virgin syslog-ng.conf and it starts doing something again Mar 14 21:52:00 wep... haven't tried wpa yet Mar 14 21:53:24 so what about the dboxes... anything fun going on there? Mar 14 21:56:05 other question: do you know a good tool to make a full hdd test? Its empty, but old 3GB 2.5" Drive and i what to test it (under linux) before install debianslug on it Mar 14 21:56:31 DFT from IBM, now Hitachi Mar 14 21:56:44 Runs under DOS Mar 14 21:56:59 pepijn just some dvb-streaming and i've beeing testing shoutcast streaming with the box Mar 14 21:57:40 Sinclair73de dd if=/dev/zero of=/dev/sda bs=1024 count=..... and check the kernel-log ;) Mar 14 21:58:33 one cable and one sat, and using udrec_suite on suse-notebook for recording and still test recording with udrec running on the slug Mar 14 22:04:03 thanks pepijn, i have the DFT... Mar 14 22:10:59 something seriously wrong with the filtering in syslog-ng Mar 14 22:18:18 seems not working with the usb-ide adapter :-( Mar 14 22:36:10 seems like syslog-ng 1.9.9-1 is only logging to the first defined log Mar 14 22:50:31 possible that http://ftp.debian.org/debian/pool/main/d/debootstrap/debootstrap-udeb_0.3.3_arm.udeb is not available at this path any more? Mar 14 22:52:23 yeah, i have heard of this from others too Mar 14 22:52:42 yeah Mar 14 22:52:55 the latest arm debootstrap there appears to http://ftp.debian.org/debian/pool/main/d/debootstrap/debootstrap-udeb_0.2.45-0.2_arm.udeb Mar 14 22:53:05 but it is still available from mirrors Mar 14 22:53:17 i have read something about the new debian dist and mirror system Mar 14 22:55:37 can i link this in the wiki/DebianSlug/Bootstrap ? Mar 14 22:55:38 i'm not sure. could be temporary. that's why i did not updated it yet. but if this is permanent, you can surely do update it Mar 14 22:57:30 hmm is the "old" link version 0.3.3 and the "new" 0.2.45 ? Mar 14 22:58:07 check the date ;) Mar 14 23:02:01 ./usr/sbin/debootstrap --arch arm sid /mnt/debinst http://ftp.debian.org/ seems not working too Mar 14 23:03:26 yep Mar 14 23:03:39 use a mirror instead Mar 14 23:08:26 ok, that works , thanks! Mar 14 23:09:05 Anyone here uses debianlug on a 128MB RAM NSLU2 ? Mar 14 23:09:47 no. but i think you have to pass an option to the kernel Mar 14 23:11:21 i do this, but get "Badness in dma_free_coherent at arch/arm/mm/consistent.c:332 or :351" in the serial console when copy files Mar 14 23:12:14 251 or so, is in the newest source Mar 14 23:12:21 sry 351 Mar 14 23:13:32 only on debianslug and only with 128MB, 32MB or 64MB CMDLINE works without these warning Mar 14 23:21:07 ok, bye, good night Mar 15 00:24:32 anyone around? Mar 15 01:07:38 hmm Mar 15 01:07:40 this is odd Mar 15 01:07:50 * NAiL has a VoIP-box on his network Mar 15 01:08:03 It doesn't like being behind a firewall at all Mar 15 01:08:19 the really strange thing is that it is changing IP's *all* of the time. Mar 15 04:37:29 03bzhou * 10unslung/ (3 files in 3 dirs): libmemcache ready for testing Mar 15 04:40:44 03bzhou * 10unslung/make/gambit-c.mk: added gambit-c scheme interpreter Mar 15 05:38:02 03bzhou * 10unslung/ (make/gambit-c.mk Makefile): gambit-c ready for testing Mar 15 07:07:33 03bzhou * 10unslung/ (sources/swi-prolog/config.h-nslu2 make/swi-prolog.mk): x-built swi-prolog runs Mar 15 10:17:26 hi! if i turnup disk /dev/sda1 which changes position (due to attachment of other USB disks) to /dev/sdb1 or so, system won't start anymore on reboot... Mar 15 10:17:58 Is it possible to base linuxrc on UUID only, not bound to a device naming? Mar 15 10:19:22 or any possibility to guarantee that a disk get /dev/sda via USB on startup? Mar 15 10:20:03 OS: debianslug le Mar 15 10:26:33 Shareman: latest SlugOS builds do exactly that Mar 15 10:29:05 cool... rwhitby: which is the most beautiful way to build latest (if i have a previous build tree?) ... "make setup" again? Mar 15 10:29:51 "make update debianslug" Mar 15 10:29:58 :) **** ENDING LOGGING AT Wed Mar 15 10:59:56 2006