**** BEGIN LOGGING AT Mon Apr 17 09:59:56 2006 Apr 17 10:10:43 03rwhitby * 10unslung/make/freeradius.mk: Added --with-openssl-includes and --with-openssl-libraries so that configure can find openssl. Apr 17 10:11:12 Optware/NSLU2 now completely rebuilds from scratch without error. Apr 17 11:32:09 Hi, I'm trying to build OpenSlug, but it fails with 'gzip: stdin: decompression OK, trailing garbage ignored' on this file: http://sources.nslu2-linux.org/sources/ports_sources.redhat.com__20050627.tar.gz Apr 17 11:32:23 It seems the file really is broken (tried using tar tvzf on the file after retrieving it manually). Any ideas to what I could try? Apr 17 13:00:31 Anyone feel like helping me building openslug? Apr 17 13:02:12 hi Apr 17 13:37:14 anyone knows how to send a mail from a commandline under debianslug? smtpclient binary seems only exist on unslung Apr 17 14:47:45 03bzhou * 10unslung/make/cherokee.mk: upstream upgrade to 0.5.2 Apr 17 20:19:42 Hiya folks. I unslung my second slug today, this one with version 6.8 (previous one 5.5). Everything went fine, but when I try to run ipkg update I get the error messages "wget: ipkg.nslu2-linux.org: Host name lookup failure" - something I never got on the first slug. What should I do, what am I missing? Th for any help. Apr 17 20:20:49 LaughingSam: check /etc/resolv.conf and that you're able to ping dns Apr 17 20:23:00 any of the webadmins around ? Apr 17 20:23:12 admins of nslu2-linux.org I mean :) Apr 17 20:23:30 Nope, must be that. Odd, it's the dns given by my provider, and it worked like a charm at my first slug Apr 17 20:24:23 This url seem to be invalid.....http://ipkg.nslu2-linux.org/feeds/unslung/wl500g/Packages Apr 17 20:24:39 Anyone know anything about changes in the repository directories ? Apr 17 20:25:40 LaughingSam, can you ping 4.79.142.202 from your slug? Apr 17 20:25:57 if not your network connection is no good Apr 17 20:26:09 03rwhitby * 10unslung/Makefile: Added gawk back into COMMON_CROSS_PACKAGES. Apr 17 20:26:09 if yes, try ping www.grc.com (this is the same site and allows pings) Apr 17 20:26:15 effem: Nope Apr 17 20:26:40 no ip ping? then your network connectivity seems bad Apr 17 20:26:49 But I can telnet into the slug, and I chat with you from the same network Apr 17 20:26:52 can you ping your interior router address Apr 17 20:27:11 yep thats odd Apr 17 20:27:12 yep, he answers Apr 17 20:27:21 and the exterior router address Apr 17 20:27:28 the one from your isp? Apr 17 20:28:35 wait a sec...i obviously got a wrong dns from thge provider's homepage, my router gives me another Apr 17 20:28:47 LaughingSam, and your 2nd slug nows the default gateway? Apr 17 20:29:03 s/nows/knows Apr 17 20:29:04 change the dns in your /etc/resolv.conf Apr 17 20:29:12 will so do, just a sec Apr 17 20:29:23 actually I have my router in /etc/resolv.conf works like a charm for me Apr 17 20:29:42 macsat: s/unslung/optware/ Apr 17 20:29:54 for unslung it may be a better way, to do such things in the webinterface Apr 17 20:29:59 (Unslung for the wl500g does not make sense - the package repo is called Optware) Apr 17 20:29:59 need to reboot? Apr 17 20:30:35 LaughingSam, no idea, if you stop/start the right daemon it might also work Apr 17 20:30:40 suggest to play it safe and reboot Apr 17 20:31:45 03rwhitby * 10unslung/Makefile: Added ntp back into COMMON_CROSS_PACKAGES. Apr 17 20:32:24 ok. while i'm waiting: can anybody tell me which /dev/ttyusb?-links that correspond to which USB-ports? Apr 17 20:32:37 LaughingSam, pls verify that your change is still in /etc/resolv.conf after the reboot Apr 17 20:33:28 LaughingSam, do you have usb serial? otherwise not ttyusb ports Apr 17 20:33:36 caplink811_log, good plan Apr 17 20:33:48 as i said above ;) Apr 17 20:33:58 03rwhitby * 10unslung/Makefile: Added cvs back into COMMON_CROSS_PACKAGES. Apr 17 20:34:39 well, changes there but no ping-answer. not to ip-numbers, not to names Apr 17 20:34:40 the pm is busy this evening ;) Apr 17 20:34:45 ok rwhitby, I guess it is Oleg that needs to get his ipkg config corrected ;-) Apr 17 20:34:48 Thanks a lot m8 Apr 17 20:35:02 LaughingSam, as i mentioned above, the slug knows the default gateway? Apr 17 20:35:12 LaughingSam, I am on openslug and I have only /dev/tty /dev/ttyS0 and /dev/ttyS1 Apr 17 20:35:18 verify that via webinterface Apr 17 20:35:47 is resolv.conf now ok? Apr 17 20:36:12 can you ping to the exterior ip address of your router (assuming you haven't blocked pings to your router) Apr 17 20:36:13 rwhitby, http://ipkg.nslu2-linux.org/feeds/optware/wl500g/Packages gives the same error Apr 17 20:36:27 if he couldn't ping the ip, then it isn't a resolver problem Apr 17 20:36:59 This dir: http://ipkg.nslu2-linux.org/feeds/optware/wl500g/ only contains a folder called cross - with two empty folders stable and unstable in it Apr 17 20:37:16 it could be routing, and/or a gateway thing Apr 17 20:38:28 yay, cap, there it was...missed the gateway when installing. now everything is beautiful Apr 17 20:38:41 ~emulate rwhitby Apr 17 20:38:42 Well, my work here is done. Apr 17 20:38:51 thanks to you all for helping out Apr 17 20:38:57 np Apr 17 20:39:44 so, effem, if i'd try to read a cell phone connected to a usb-port i'd read ttyS0 or ttyS1? Apr 17 20:39:50 btw, LaughingSam do you know this adress http://www.nslu2-linux.org/wiki/FAQ/HomePage ? Apr 17 20:40:29 cap: oh yeah, i've contributed as well! Apr 17 20:40:35 LaughingSam: /dev/ttyUSB0 Apr 17 20:41:09 USB0 for port 1, and USB1 for port 2, I presume? Apr 17 20:41:53 LaughingSam, yes Apr 17 20:42:09 your cell phone cable has a usb to serial chip in it so it installs as a tty Apr 17 20:42:27 don't know how you get two ttyUSB ports Apr 17 20:42:48 unless you have two cables or another usb<->serial thing Apr 17 20:43:14 dandy. Has anybody else managed to read a cell phone with the slug? I installed gnokii (compiled just fine) and will start looking for the phone in a few days. Apr 17 20:43:48 is there by any chance anyone from seattle, wa online? Apr 17 20:44:46 LaughingSam: ttyUSB0..1..2..etc are assigned dynamically to the usb com-ports as they're plugged in Apr 17 20:46:38 OK. I'll get down to the bizniz as soon as I get the phone. Apr 17 20:49:32 03rwhitby * 10unslung/Makefile: Added lots more missing packages back in. Apr 17 21:10:20 me again...tried to run "ipkg install unslung-devel" (in order to install SlimServer) but got error messages..."ERROR: Cannot satisfy the following dependencies for unslung-devel: cvs gawk". How now? Apr 17 21:12:02 LaughingSam: someone had removed them from the Makefile - they are back now and will be uploaded on the next autobuild run Apr 17 21:13:23 ok, so i can go to sleep now?! obviously nothing to do but wait. Apr 17 21:19:53 03rwhitby * 10unslung/make/gnupg.mk: Updated to latest upstream release. Apr 17 21:37:12 03rwhitby * 10unslung/Makefile: Promoted all packages that were ready for testing. Apr 17 22:07:39 With unslung doing: insmod ppp_mppe gives: Apr 17 22:08:11 Using /lib/modules/2.4.22-xfs/kernel/drivers/net/ppp_mppe.o Apr 17 22:08:12 insmod: unresolved symbol __floatsidf Apr 17 22:08:14 insmod: unresolved symbol __adddf3 Apr 17 22:08:39 n0se, maybe you need to insert some other modules first? Apr 17 22:09:32 I have tried several of them. I don't find the correct module. I have searched google. There are notes about soft-float, and that floats are not allowed on the kernel. Apr 17 22:09:48 i'm not sure about unslung.. is there some "modinfo" tool? you might want to try modprobe'ing the module too Apr 17 22:14:17 n0se: I'm not sure if that module has ever worked ... Apr 17 22:15:34 Can I build the kernel on unls2, or I have to cross-compile it on a linux box? Apr 17 22:15:52 depends how much time you have on your hands ... Apr 17 22:16:15 you can compile it on the nslu2, but it's propably much faster on the linux box Apr 17 22:16:16 I will try in the unsl2. I haven't a linux box. Apr 17 22:16:29 n0se: do you have a pc or mac? Apr 17 22:16:34 pc Apr 17 22:16:39 NetBSD Apr 17 22:16:58 use knoppix then Apr 17 22:17:21 or get the mastermakefile to work under NetBSD :-) Apr 17 22:18:28 it's an overnight job to build the kernel on a slug Apr 17 22:18:53 03bzhou * 10unslung/Makefile: removed .mk from py- package names Apr 17 22:20:35 I have readed that NetBSD boots on unsl2, but ethernet and gzboot don't work. Do you thinkt that is it very dificult to make a new ethernet driver for NetBSD? (is it a job of a week by example?) Apr 17 22:20:55 it's not a job I would attempy Apr 17 22:20:57 attempt Apr 17 22:35:29 rwhitby: Is it too complex or is the ipx425 bad documented? Apr 17 22:41:00 n0se: the unresolved symbols are references to floating point libs. I'm not sure if this is a hard rule, but I don't think the kernel is supposed to do floating point -- this is the sort of error one gets when code references what are assumed to be integer constants that end up being defined in floating point format. Source code is in the standard kernel, I guess I'd start by finding out... Apr 17 22:41:02 ...if the code has any business doing floating point in the first place... Apr 17 22:44:03 mwester: thank you Apr 17 23:06:36 03rwhitby * 10unslung/Makefile: Demoted libstdc++ for ds101 (fails to build). Apr 18 00:26:22 rwhitby, optware Makefile -r1.744 was where a couple of packages got lost Apr 18 00:26:55 in fact, there are still 2 or 3 missing Apr 18 00:29:43 eno-away: please add them back if you work out which they are Apr 18 00:30:03 alright, will do Apr 18 00:34:22 thanks Apr 18 00:35:49 03bzhou * 10unslung/Makefile: recovered: gettext libsigc++ mutt pcre, which were lost in -r1.744 re-org Apr 18 04:02:31 03bzhou * 10unslung/ (sources/ecl/cross_config_nslu2 make/ecl.mk): work in progress **** ENDING LOGGING AT Tue Apr 18 09:59:57 2006