**** BEGIN LOGGING AT Tue Oct 17 02:59:57 2006
Oct 17 05:56:50 <CIA-8> 03rwhitby * r4235 10optware/trunk/sources/fsg3-bootstrap/ (bootstrap.sh preinst): fsg3-bootstrap: minor changes, still untested
Oct 17 05:57:10 <CIA-8> 03rwhitby * r4236 10optware/trunk/.cvsignore: ignore fsg3 and ddwrt build dirs
Oct 17 06:00:13 <CIA-8> 03rwhitby * r4237 10optware/trunk/:
Oct 17 06:51:54 <CIA-8> 03rwhitby * r4238 10optware/trunk/make/clamav.mk: clamav: /opt/man needed to be changed to /opt/share/man to build
Oct 17 06:58:30 <CIA-8> 03rwhitby * r4239 10optware/trunk/make/clamav.mk: clamav: revert last change - seems to be an fsg3 problem only
Oct 17 07:05:58 <rwhitby> aha - autoconf 2.59 and autoconf 2.60 give different locations for the man directories!
Oct 17 07:06:23 <rwhitby> hence nudi (running sarge) has different paths from my etch build host
Oct 17 07:43:52 <CIA-8> 03oleo * r4240 10optware/trunk/ (4 files in 2 dirs): transmission: daemon message queuing and URL fixes
Oct 17 08:02:24 <CIA-8> 03rwhitby * r4241 10optware/trunk/ (5 files in 2 dirs): fsg3-bootstrap: more fixes - still untested
Oct 17 08:07:02 <NAiL> rwhitby: I can test later today I hope
Oct 17 08:08:27 * NAiL starts to build fsg3-bootstrap
Oct 17 08:09:10 <rwhitby> NAiL: need to clean out the ds101 library stuff which is not needed
Oct 17 08:09:25 <NAiL> aha
Oct 17 08:10:01 <rwhitby> also need to add an S99optware symlink to /etc/init.d/optware
Oct 17 08:10:26 <rwhitby> it would be good to start with no libraries, and work up from there.
Oct 17 08:11:03 <rwhitby> and we definitely do not want to touch ld.so.conf or run ldconfig - we use -rpath at compile-time for that stuff
Oct 17 08:11:36 <rwhitby> NAiL: why do you do stuff in -stage for the bootstrap?
Oct 17 08:12:04 <NAiL> the last stuff that was done was basically a hack
Oct 17 08:12:16 <rwhitby> surely nothing calls fsg3-bootstrap-stage, does it?
Oct 17 08:14:42 <NAiL> Not sure
Oct 17 08:14:54 <NAiL> It's been too long since I actively worked on ds101-bootstrap
Oct 17 08:15:19 <CIA-8> 03rwhitby * r4242 10optware/trunk/make/fsg3-bootstrap.mk: fsg3-bootstrap: removed all the libraries - still untested
Oct 17 08:15:27 <rwhitby> ok, that should be a safe base to start from
Oct 17 08:15:59 <rwhitby> I need to get an sftp server on the fsg asap
Oct 17 08:18:12 <rwhitby> NAiL: do you have an fsg3 original firmware build environment?
Oct 17 08:18:54 <NAiL> no, do I need one?
Oct 17 08:19:37 <rwhitby> Their source distro has an sftp-server.c which would match the ssh in the stock firmware
Oct 17 08:20:28 <NAiL> install: cannot create regular file `/home/repvik/slug/optware/builds/fsg3-bootstrap-0.1-ipk/etc/init.d/optware': No such file or directory
Oct 17 08:20:31 <NAiL> make: *** [/home/repvik/slug/optware/builds/fsg3-bootstrap_0.1-0_armeb.ipk] Error 1
Oct 17 08:20:43 <rwhitby> that should be fixed in the latest commit
Oct 17 08:20:48 <NAiL> ah, ok
Oct 17 08:20:56 <rwhitby> NAiL: here is my /etc/int.d/fan file:
Oct 17 08:21:04 <rwhitby> #! /bin/sh
Oct 17 08:21:04 <rwhitby> case "$1" in
Oct 17 08:21:04 <rwhitby>     start)
Oct 17 08:21:04 <rwhitby>         echo "Starting Fan deamon."
Oct 17 08:21:04 <rwhitby> #       /usr/bin/fand > /dev/null
Oct 17 08:21:04 <rwhitby>         echo "34 1 1" > /proc/sys/dev/sensors/w83782d-i2c-0-28/pwm1
Oct 17 08:21:07 <rwhitby>     ;;
Oct 17 08:21:11 <rwhitby>     reconfig)
Oct 17 08:21:12 <rwhitby>         echo "34 1 1" > /proc/sys/dev/sensors/w83782d-i2c-0-28/pwm1
Oct 17 08:21:15 <rwhitby>     ;;
Oct 17 08:21:17 <rwhitby>     stop)
Oct 17 08:21:19 <rwhitby>         echo "Shutting down Fan deamon."
Oct 17 08:21:21 <rwhitby>         echo "34 1 1" > /proc/sys/dev/sensors/w83782d-i2c-0-28/pwm1
Oct 17 08:21:22 <rwhitby> #       killall fand
Oct 17 08:21:24 <rwhitby>     ;;
Oct 17 08:21:26 <rwhitby>     *)
Oct 17 08:21:28 <rwhitby>         echo "Usage: $0 {start|stop|reconfig}"
Oct 17 08:21:31 <rwhitby>         exit 1
Oct 17 08:21:33 <rwhitby> esac
Oct 17 08:21:35 <rwhitby> exit 0
Oct 17 08:21:37 <rwhitby> 34 seems to be nice and quiet :-)
Oct 17 08:22:15 <rwhitby> NAiL: back later
Oct 17 08:22:35 <rwhitby> but not too late - gotta get some sleep tonight before I spend 24 hours travelling to the US tomorrow
Oct 17 08:22:54 <rwhitby> 24 hours to get there, 48 hours there, 24 hours to get home again.
Oct 17 08:23:21 <NAiL> ouch
Oct 17 08:23:34 <NAiL> should've been fixed. I still get the same error
Oct 17 08:23:44 <NAiL> I'll try to look at it after work
Oct 17 08:26:15 <CIA-8> 03rwhitby * r4243 10optware/trunk/make/fsg3-bootstrap.mk: fsg3-bootstrap: fixed missing mkdir
Oct 17 08:26:31 <rwhitby> should be fixed now - I fixed it in the staging, which I then deleted :-)
Oct 17 10:07:09 <rwhitby> NAiL: fsg3-bootstrap 1.0 almost ready
Oct 17 10:23:26 <CIA-8> 03rwhitby * r4244 10optware/trunk/ (6 files in 2 dirs): fsg3-bootstrap: Version 1.0 ready for beta testing
Oct 17 10:23:59 <rwhitby> NAiL: there you go
Oct 17 10:26:41 <barnseenio> could someone help me, i wish to compile the latest head of rtorrent for debianslug. i tried creating an ARM cross compiler in debian, but i got some errors when debuilding gcc, the mailing list suggested i use the mastermake file to get a build environment. i have done that and successfully compiled debianslug image, however im not sure how i can then go on to compile rtorrent. any help would be graciously recieved!
Oct 17 10:32:41 <rwhitby> barnseenio: once you have compiled the image, you have a nice arm cross compiler in tmp/cross/bin
Oct 17 10:32:55 <barnseenio> aah .. exactly what i needed to know!
Oct 17 10:34:21 <barnseenio> aah
Oct 17 10:34:26 <barnseenio> thanks
Oct 17 10:35:03 <rwhitby> barnseenio: you're welcome
Oct 17 10:36:01 <rwhitby> barnseenio: BTW, you should refer to your system as Debian/NSLU2 rather than debianslug, cause debianslug is ambiguous as to whether you mean Debian/NSLU2 or SlugOS/LE (both of which are referred to as [Dd]ebian[Ss]lug)
Oct 17 10:36:21 <barnseenio> gotcha, i really didnt understand the comment you made about that on the list
Oct 17 10:36:35 <barnseenio> i thought slugod was called openslug ?
Oct 17 10:36:38 <barnseenio> *slugos
Oct 17 10:37:03 <rwhitby> openslug is SlugOS/BE
Oct 17 10:37:17 <barnseenio> ah big and little
Oct 17 10:37:19 <rwhitby> SlugOS/LE is the little-endian version, on which you can debootstrap to a Debian rootfs
Oct 17 10:37:19 <barnseenio> im catching up
Oct 17 10:37:45 <rwhitby> if you use the Debian installer (which contains the Debian kernel, rather than the SlugOS kernel), then you're running Debian/NSLU2, not SlugOS/LE
Oct 17 10:38:21 <rwhitby> If you start with SlugOS/LE and debootstrap, then you're still running SlugOS/LE, but with a Debian rootfs.
Oct 17 10:38:32 <barnseenio> hmm, crikey ..
Oct 17 10:38:36 <rwhitby> both situations are colloquially referred to as DebianSlug :-)
Oct 17 10:38:54 <barnseenio> i didnt use the debian installer, as i was told it had issues
Oct 17 10:38:55 <rwhitby> The thing is that the SlugOS/LE kernel is more up to date than the Debian kernel
Oct 17 10:39:02 <barnseenio> i believe i used the debootstrap method
Oct 17 10:39:10 <rwhitby> Good - that's what I recommend.
Oct 17 10:39:24 <rwhitby> So actually, you are running DebianSlug :-)
Oct 17 10:39:28 <barnseenio> so, im running slugos/le ?
Oct 17 10:39:57 <rwhitby> yeah, you've got SlugOS/LE kernel and modules, a SlugOS/LE rootfs in flash, and you pivot to a Debian rootfs on disk.
Oct 17 10:40:46 <rwhitby> we trial kernel changes in the nslu2-linux kernel svn repo, then they migrate into SlugOS unstable, and separately they get into the Debian kernel.
Oct 17 10:41:24 <rwhitby> e.g. at the moment we're moving SlugOS 4.x to the new open source ixp driver
Oct 17 10:42:42 <barnseenio> thanks, i now understand!
Oct 17 10:42:54 <rwhitby> np
Oct 17 10:43:05 <rwhitby> always happy to help an nslu2 developer :-)
Oct 17 10:43:27 <barnseenio> heh, well .. a real novice. 
Oct 17 10:43:57 <barnseenio> but i have loearned loads since owning the slug
Oct 17 10:44:30 <barnseenio> -o
Oct 17 10:46:28 <NAiL> rwhitby: ok, I'll try to get around to it tonight :)
Oct 17 10:47:04 <rwhitby> NAiL: just fixing the makefile dependencies now so I can get the bootstrap scripts into the feeds
Oct 17 10:49:07 <rwhitby> NAiL: for some reason, the -xsh target always rebuilds
Oct 17 10:51:30 <CIA-8> 03rwhitby * r4245 10optware/trunk/ (Makefile make/ds101-bootstrap.mk make/fsg3-bootstrap.mk): {ds101,fsg3}-bootstrap: Add bootstrap scripts to the feeds.
Oct 17 10:52:26 <rwhitby> ok, that will at least get the scripts into the feeds
Oct 17 10:52:36 <rwhitby> but they will be rebuilt every time the autobuilder runs
Oct 17 10:57:49 <rwhitby> NAiL: has glibc for ds101 moved from 2.2.5 to 2.3.3 ?
Oct 17 10:58:45 <CIA-8> 03rwhitby * r4246 10optware/trunk/make/ds101-bootstrap.mk: ds101-bootstrap: glibc changed from 2.2.5 to 2.3.3
Oct 17 10:59:06 <NAiL> I believe so, can't check right now (@work)
Oct 17 10:59:15 <NAiL> I've tried getting the feeds rebuilt
Oct 17 10:59:24 * NAiL goes back to work
Oct 17 11:03:03 <CIA-8> 03rwhitby * r4247 10optware/trunk/make/ds101-bootstrap.mk: ds101-bootstrap: remove foo.dir directories
Oct 17 11:03:44 <barnseenio> nslu2@exeterdeb:~$ file a.out
Oct 17 11:03:45 <barnseenio> a.out: ELF 32-bit LSB executable, ARM, version 1 (ARM), for GNU/Linux 2.4.0, dynamically linked (uses shared libs), for GNU/Linux 2.4.0, not stripped
Oct 17 11:03:51 <barnseenio> rock on
Oct 17 11:04:08 <barnseenio> although i did get this error 
Oct 17 11:04:10 <barnseenio>  Warning: /tmp/ccyZNVQ8.o does not support interworking, whereas a.out does
Oct 17 11:04:17 <barnseenio> *warning
Oct 17 11:04:32 <CIA-8> 03rwhitby * r4248 10optware/trunk/make/ds101-bootstrap.mk: ds101-bootstrap: remove foo.dir directories
Oct 17 11:06:37 <CIA-8> 03rwhitby * r4249 10optware/trunk/make/libnsl.mk: libnsl: glibc update
Oct 17 11:06:48 <rwhitby> barnseenio: I don't know anything about interworking
Oct 17 11:06:56 <barnseenio> neither do i!
Oct 17 11:07:17 <barnseenio> what is it?
Oct 17 11:07:39 <rwhitby> an execution paradigm on arm processors, interworking between thumb and non-thumb I think
Oct 17 11:07:47 <rwhitby> NAiL: ds101 feed building
Oct 17 11:08:21 <barnseenio> all the program contained was #include <stdio.h>
Oct 17 11:09:29 <rwhitby> NAiL: optware-ds101 built
Oct 17 11:13:46 <barnseenio> google suggest "Put -mthumb-interwork on the gcc command line."
Oct 17 11:13:58 <barnseenio> which stops the warning, although im not sure why it appears
Oct 17 11:14:53 <rwhitby> FYI: I've installed git-core on the autobuild machine from backports.org (so that OE will continue to build)
Oct 17 12:14:54 <CIA-8> 03blaster8 * r490 10kernel/trunk/patches/2.6.18/ (4 files): Add MAC address randomisation bypass to 2.6.18
Oct 17 12:22:59 <CIA-8> 03blaster8 * r491 10kernel/trunk/patches/2.6.18/ (3 files): General 2.6.18 refresh
Oct 17 12:32:30 <CIA-8> 03rwhitby * r4250 10optware/trunk/ (make/openssh.mk sources/openssh/rc.openssh): openssh: remove the dependency on pidof
Oct 17 12:34:40 * rwhitby now has scp access to the fsg3
Oct 17 12:38:15 <CIA-8> 03oleo * r4251 10optware/trunk/ (make/transmission.mk sources/transmission/README.daemon): transmission: add README notice for wl500g uClibc 0.9.19 problem
Oct 17 12:43:16 <CIA-8> 03rwhitby * r4252 10optware/trunk/ (make/openssh.mk sources/openssh/rc.openssh): openssh: remove explicit path from killall
Oct 17 13:09:40 <CIA-8> 03rwhitby * r4253 10optware/trunk/ (3 files in 2 dirs): ftpd-topfield: removed dependency on pidof for fsg3
Oct 17 14:08:16 <booto> ~
Oct 17 14:45:19 <joshin> Is there enough room left in the slug's kernel partition for me to have builtin support for ipv6?
Oct 17 14:57:46 <blaster8> not atm
Oct 17 14:57:54 <blaster8> but eventually, yes
Oct 17 14:57:58 <blaster8> why can't you load modules?
Oct 17 15:26:09 <joshin> blaster8, I can load modules.  I'm trying to debug an issue with glibc 2.5 and IPV6 so wanted to make sure that I'm not missing any modules.  
Oct 17 15:26:31 <VoodooZ> joshin, hey
Oct 17 15:26:32 <blaster8> ok
Oct 17 15:26:43 <VoodooZ> Is that for your gentooslug?
Oct 17 15:26:50 <joshin> Getting the following error any time something even things about IPV6: ../sysdeps/unix/sysv/linux/check_pf.c:68: make_request: Assertion `sizeof (req) - ((size_t) &((struct req *)0)->pad) == 3' failed.
Oct 17 15:26:51 <joshin> Aborted
Oct 17 15:26:59 <joshin> VoodooZ, yup.  
Oct 17 15:27:02 <blaster8> eek
Oct 17 15:27:03 <VoodooZ> cool.
Oct 17 15:27:45 <joshin> blaster8, yeah.  If things stick to v4 then all is fine.  But when things ponder using v6 that error occurs.  
Oct 17 15:28:05 <joshin> Am rebuilding glibc after loading all the v6 modules I could find/think of.
Oct 17 15:28:13 * VoodooZ personally stays far away from anything ipv6.
Oct 17 15:28:16 <barnseenio> anyone seen this before ..
Oct 17 15:28:17 <barnseenio> checking the byte alignment... configure: error: cannot run test program while cross compiling
Oct 17 15:28:20 <barnseenio> See `config.log' for more details.
Oct 17 15:28:30 <barnseenio> im trying to compile rtorrent for debianslug
Oct 17 15:28:38 <barnseenio> using the arm-linux.gcc cross compiler
Oct 17 15:28:53 <barnseenio> atm the configure is barfing
Oct 17 15:29:06 <joshin> barnseenio, are you specifying little endian?  You may need to explicitly tell it byte alignment.
Oct 17 15:29:24 <barnseenio> well .. its just after an endian test
Oct 17 15:29:31 <barnseenio> checking whether byte ordering is bigendian... no
Oct 17 15:29:32 <barnseenio> checking the byte alignment... configure: error: cannot run test
Oct 17 15:29:57 <barnseenio> im not specifying atm (not really sure how) im running this atm
Oct 17 15:29:59 <barnseenio> ./configure --host=arm-linux --without-openssl --prefix=/home/nslu2/installroot/ CC=/home/nslu2/slug/debianslug/tmp/cross/bin/arm-linux-gcc
Oct 17 15:30:42 <joshin> barnseenio, then tell configure that you want it to build a little-endian binary
Oct 17 15:30:55 <joshin> and no, I don't know the flag to use
Oct 17 15:30:59 <joshin> :)
Oct 17 15:31:02 <barnseenio> heh
Oct 17 15:31:03 * joshin reads minds
Oct 17 15:31:10 <barnseenio> dash
Oct 17 15:31:11 <joshin> VoodooZ, stop thinking that!
Oct 17 15:31:20 <joshin> You people...
Oct 17 15:36:20 <VoodooZ> hehe
Oct 17 18:10:27 <CIA-8> 03bzhou * r4254 10optware/trunk/Makefile: try rsync xsh file only when present
Oct 17 20:04:48 <barnseenio> any sluggers alive?
Oct 17 20:07:33 <EvilDevil> alive and slugging
Oct 17 20:13:08 <barnseenio> hey hey hye
Oct 17 20:13:29 <barnseenio> im trying to compile latest rtorrent head for debianslug-LE
Oct 17 20:13:45 <barnseenio> i feel like i keep edging forward, but not very fast!
Oct 17 20:14:07 <barnseenio> i have the arm-linux-gcc from the mastermakefile
Oct 17 20:14:25 <barnseenio> and various dependencies for rtorrent
Oct 17 20:14:37 <barnseenio> but im now getting a error during the ./configure
Oct 17 20:14:49 <barnseenio> checking whether byte ordering is bigendian... no
Oct 17 20:14:49 <barnseenio> checking the byte alignment... configure: error: cannot run test program while cross compiling
Oct 17 20:14:53 <barnseenio> See `config.log' for more details.
Oct 17 20:26:00 <barnseenio> --enable-aligned=yes
Oct 17 20:26:13 <barnseenio> lord thank #libtorrent
Oct 17 20:35:07 <[g2]> barnseenio are you a torrent guy ?
Oct 17 20:35:36 <barnseenio> not sure what that means?
Oct 17 20:35:45 <barnseenio> im running rtorrent on my slug yes
Oct 17 20:35:50 <[g2]> do you do some bit torrenting
Oct 17 20:35:59 <barnseenio> yes
Oct 17 20:36:33 <[g2]> ok I'm a torrent idiot, however I'm very nslu2-linux development savvy
Oct 17 20:36:58 <[g2]> I'm just about ready to torrent a Ubuntu LiveCD with all the build tools and source :)
Oct 17 20:36:59 <ByronT> [g2] are you sure about that?
Oct 17 20:37:13 * [g2] bows to ByronT 
Oct 17 20:37:16 <ByronT> (about being n-l dev savvy?)  ;)
Oct 17 20:37:39 <[g2]> ByronT all engineering questions are relative ;)
Oct 17 20:37:49 <barnseenio> ok [g2] 
Oct 17 20:38:00 <ByronT> [g2] - if you'll give me a seed, I'll be a torrent peer for ya
Oct 17 20:38:19 <barnseenio> i could do with some bloody linux development savvy .. i'll be fucked if i can get this rtorrent to compile for ARM
Oct 17 20:38:35 <barnseenio> sure, i'll seen if you like
Oct 17 20:38:46 <barnseenio> its not illegal though is it?
Oct 17 20:38:48 <[g2]> ByronT my hosting server can to nearly 7Mbs to the net
Oct 17 20:38:56 <[g2]> but I'd like to have some seeds
Oct 17 20:39:07 <ByronT> give me a linky!
Oct 17 20:39:15 <[g2]> even though I've never torrented anything yet
Oct 17 20:39:26 <ByronT> I've got AnalogX BitPump on the ready
Oct 17 20:39:35 <barnseenio> yes, just post the .torrent somewhere, i have  script sat on the slug ready and waiting
Oct 17 20:39:48 <barnseenio> soooo
Oct 17 20:40:04 <barnseenio> my rtorrent build ..
Oct 17 20:40:09 <barnseenio> im now calling configure like this ...
Oct 17 20:40:11 <barnseenio> ./configure --host=arm-linux --without-openssl --prefix=/home/nslu2/installroot/ CC=/home/nslu2/slug/debianslug/tmp/cross/bin/arm-linux-gcc CCX=/home/nslu2/slug/debianslug/tmp/cross/bin/arm-linux-g++ --enable-aligned=yes
Oct 17 20:40:13 <[g2]> no it shouldn't be illegal anywhere, but it's a large world
Oct 17 20:41:01 <barnseenio> exeterdeb:/home/nslu2/installroot/lib# file libtorrent.so.10.0.0              
Oct 17 20:41:04 <barnseenio> libtorrent.so.10.0.0: ELF 32-bit LSB shared object, Intel 80386, version 1 (SY
Oct 17 20:41:07 <barnseenio> ba*tard
Oct 17 20:41:11 <[g2]> ByronT I was gonna target SlugOS 4.x
Oct 17 20:41:43 <barnseenio> mm its CXX
Oct 17 20:41:43 <[g2]> ByronT we can do an Intel IXP free release
Oct 17 20:42:20 <[g2]> ByronT I'm running the non intel drivers on the Loft with 2.6.18
Oct 17 20:42:22 <ByronT> neato
Oct 17 20:42:24 <[g2]> and debian
Oct 17 20:42:48 <[g2]> I've got a couple 128MB systems and I'm setting up the regression lab
Oct 17 20:43:00 <ByronT> makes all my machinations with Intel ppl who only respond after repeated prodding seem empty.... ;)
Oct 17 20:43:14 <barnseenio> g2 do you run SlugOS/LE ?
Oct 17 20:43:30 <[g2]> I run Debian/LE on IXP hw
Oct 17 20:43:49 <[g2]> ~g2
Oct 17 20:43:51 <jbot> Easy to use, portable and powerful 2D graphics library. URL: http://www.ap.univie.ac.at/users/ljubo/g2/g2.shtml
Oct 17 20:43:58 <[g2]> ~[g2]
Oct 17 20:44:00 <jbot> hmm... [g2] is really cool, and an an all around nice guy!  Also he is a real funny guy, the master of NSLU2 Buildroot and a known Slug Sacrificer.  And editor of SlugNews.
Oct 17 20:44:00 <barnseenio> and do you compile on slug, or have cross compile env?
Oct 17 20:44:59 <[g2]> barnseenio I was here since the beginning 6/04. I've done a bit
Oct 17 20:45:07 <ByronT> hmmm...  I wonder what (if anything) has been written about me...  
Oct 17 20:45:11 <ByronT> ~ByronT
Oct 17 20:45:24 <ByronT> aha nada!
Oct 17 20:45:50 <[g2]> jbot ByronT is a crazy guy
Oct 17 20:45:51 <jbot> okay, [g2]
Oct 17 20:45:56 <ByronT> heh
Oct 17 20:46:05 <[g2]> ~ByronT
Oct 17 20:46:07 <jbot> hmm... byront is a crazy guy
Oct 17 20:46:13 <[g2]> lol
Oct 17 20:46:50 <[g2]> jbot no "ByronT" is a crazy guy
Oct 17 20:46:52 <jbot> [g2]: I think you lost me on that one
Oct 17 20:47:03 <[g2]> jbot "ByronT" is a crazy guy
Oct 17 20:47:04 <jbot> [g2]: what are you talking about?
Oct 17 20:47:26 <[g2]> anyway enough playing with the bot
Oct 17 20:47:54 <[g2]> ~rwhitby
Oct 17 20:47:55 <jbot> extra, extra, read all about it, rwhitby is the owner of the nslu2-linux mailing list and IRC channel.  He tries to provide some order to the burgeoning development around the NSLU2.  You can find his website at http://www.rwhitby.net (where in particular, you will find information on Serial Port modifications for the Linksys WRT54G and NSLU2 devices).
Oct 17 20:47:56 <ByronT> jbot ByronT is a crazy guy who bugged rwhitby until rwhitby semi-forcefully coerced him into cleaning up and maintaining the nslu2-based README and associated documentation.  Also known as the newbie-helper and sometimes developer.
Oct 17 20:47:57 <jbot> ...but byront is already something else...
Oct 17 20:48:03 <barnseenio> so does it sound crazy that im in debian (not on slug) with the cross compilers built from the mastermakefile, and im running the ./configure specifying arm-linux-g++ etc as configure params... does all that shit sound like im barking up the wrong tree .. or is it essentially close?
Oct 17 20:48:16 <ByronT> ~ByronT
Oct 17 20:48:17 <jbot> hmm... byront is a crazy guy
Oct 17 20:48:54 <dwery> nice bot ;)
Oct 17 20:48:55 <[g2]> barnseenio Ok you've got the master makefile that built all the cross tools
Oct 17 20:49:00 <rwhitby> barnseenio: that seems like a reasonable thing to do if you can't find a working packages arm cross compiler in debian
Oct 17 20:49:01 <barnseenio> yuppe
Oct 17 20:49:30 <[g2]> barnseenio running sarge ?
Oct 17 20:49:32 <barnseenio> i didnt get ' working packages arm cross compiler'
Oct 17 20:49:35 <barnseenio> yes sarge
Oct 17 20:49:46 <[g2]> which package are you trying to build ?
Oct 17 20:49:51 <[g2]> rtorrent ?
Oct 17 20:49:54 <barnseenio> rtorrent/libtorrent
Oct 17 20:50:18 <barnseenio> from latest head (i know i can apt-get an older version)
Oct 17 20:51:29 <[g2]> barnseenio Ok.. I've got to run now I'll be back in several hours
Oct 17 20:51:44 <[g2]> I can probably build the debian package easily
Oct 17 20:51:55 <barnseenio> ok well, ive been struggling with this for a week .. so no rush ;-)
Oct 17 20:52:31 <barnseenio> i'll linger in this channel for a few days so feel free to post back to it if you get anything
Oct 17 20:52:40 <barnseenio> tbh id like to know how to do it myself
Oct 17 20:52:49 <[g2]> sure
Oct 17 20:52:54 <[g2]> ~nslu2-rules
Oct 17 20:52:54 <barnseenio> but id be really happy just to get the latest versioini, as it contains an important fix i need
Oct 17 20:52:56 <jbot> somebody said nslu2-rules was 1) You must search the wiki before asking questions on IRC or mailing list. 2) You must follow the README steps precisely when flashing firmware. 3) Those who ask the questions, update the wiki with the answers. 4) Those who complain about doco, update the wiki to improve it. 5) Friends don't let friends flash custom firmware without ...
Oct 17 20:53:17 <[g2]> rule #3 right ?
Oct 17 20:53:26 <rwhitby> we need to add 0) Never use the Linksys EraseAll tool.
Oct 17 20:53:28 <barnseenio> aha, sure 
Oct 17 20:53:33 <[g2]> Ok
Oct 17 20:53:48 <barnseenio> so far all im really doing is this .. incase its of use to you
Oct 17 20:53:49 <barnseenio> svn co svn://rakshasa.no/libtorrent/trunk/libtorrent
Oct 17 20:53:49 <barnseenio> ./configure --host=arm-linux --without-openssl --prefix=/home/nslu2/installroot/ CC=/home/nslu2/slug/debianslug/tmp/cross/bin/arm-linux-gcc CXX=/home/nslu2/slug/debianslug/tmp/cross/bin/arm-linux-g++ --enable-aligned=yes
Oct 17 20:54:18 <eno> barnseenio: i would suggest you get distcc working first
Oct 17 20:54:24 <barnseenio> oo
Oct 17 20:54:26 <barnseenio> wasthat
Oct 17 20:54:39 <eno> cross compilation usually takes more tweaking
Oct 17 20:55:11 <eno> maybe search on how to build debian packages with distcc
Oct 17 20:55:24 <barnseenio> i'll have a look
Oct 17 20:55:35 <barnseenio> someone also suggest scratchbox
Oct 17 20:55:48 <barnseenio> but it seemed nothing different to the arm-linux* compilers i already have
Oct 17 20:56:01 <barnseenio> but in a chroot
Oct 17 20:56:42 <[g2]> barnseenio which TZ are you in ? GMT +/- n
Oct 17 20:57:10 <barnseenio> london
Oct 17 20:57:14 <barnseenio> err, -0
Oct 17 20:57:17 <barnseenio> i guess
Oct 17 20:57:21 <[g2]> sure
Oct 17 20:57:31 <barnseenio> i'll leave this irssi going on the slug though
Oct 17 20:57:32 <[g2]> I'll look for you in your AM
Oct 17 20:57:43 <[g2]> yeah IRC is 24/7
Oct 17 20:57:43 <barnseenio> so you can post in here or query and i'll see it
Oct 17 20:58:05 <barnseenio> [g2]: your the friendliest person i ever met on irc
Oct 17 20:58:05 <[g2]> nod
Oct 17 20:58:39 <[g2]> barnseenio quite taking the piss outta me
Oct 17 20:58:46 <[g2]> quit
Oct 17 20:58:48 <barnseenio> lol, no
Oct 17 20:58:56 <barnseenio> i wasnt!
Oct 17 20:59:02 <[g2]> sure
Oct 17 20:59:10 <barnseenio> seriously!
Oct 17 20:59:12 <[g2]> cheers mate
Oct 17 20:59:30 <barnseenio> k tc
Oct 17 20:59:33 <barnseenio> and thanks again
Oct 17 20:59:35 <[g2]> thx
Oct 17 21:01:54 <rwhitby> barnseenio: we're all friendly in nslu2-linux
Oct 17 21:02:05 <rwhitby> (most of the time :-)
Oct 17 21:02:21 <rwhitby> but [g2] is the one who gives electronic hugs
Oct 17 21:02:29 <barnseenio> heh, yeah its really nice
Oct 17 21:08:49 <[g2]> we've got a great community esp. thx rwhitby dyoung dwery DaKa ByronT ka6sox and many more
Oct 17 21:09:32 <eno> barnseenio: http://www.nslu2-linux.org/wiki/DebianSlug/UseDistCCWithCrossCompiler
Oct 17 21:15:27 <rwhitby> ok, we have a new rule #1 at www.nslu2-linux.org
Oct 17 21:18:04 <eno> the search on the left-hand-side of the wiki is broken
Oct 17 21:18:13 <eno> it would be nice someone can fix it
Oct 17 21:20:00 <rwhitby> What needs to be fixed?  If it's a two minute job I can do it now, otherwise I need to catch a plane.
Oct 17 21:22:10 <eno> i dunno what needs to be fixed. Type anything in the left search box and it's not working
Oct 17 21:22:26 <rwhitby> I dunno how to fix it in twp minutes then
Oct 17 21:56:55 <CIA-8> 03tbm * r39 10upslug2/trunk/upslug2.8: clarify that RedBoot/SysConf won't be changed, thanks mikishar2@yahoo.com
Oct 17 23:16:41 <joshin> Hmmm, I think that the new ethernet driver has a hard coded MAC address.  Makes it hard to have 2 slugs...
Oct 17 23:30:36 <[g2]> joshin where are you pulling from ?
Oct 17 23:31:12 <joshin> It is a 10 day old build.  Everything is stuck at 00:0C:BE:00:01:01.  (The SVN is down as of 5 minutes ago)
Oct 17 23:31:46 <[g2]> svn from this morning has the randomize patch in 2.1
Oct 17 23:31:49 <[g2]> 0.2.1
Oct 17 23:32:07 <[g2]> iirc r 491 ish
Oct 17 23:32:09 <joshin> Cool, guess it is time to freshen my slugs.  :)
Oct 18 00:23:37 <[g2]> barnseenio fyi: One -r 791 I get
Oct 18 00:23:49 <[g2]> Ok make that 792
Oct 18 00:24:04 <[g2]> checking for statvfs... ok
Oct 18 00:24:06 <[g2]> ./configure: line 21552: syntax error near unexpected token `OPENSSL,'
Oct 18 00:24:06 <[g2]> ./configure: line 21552: `      PKG_CHECK_MODULES(OPENSSL, openssl,'
**** ENDING LOGGING AT Wed Oct 18 02:59:56 2006