**** BEGIN LOGGING AT Thu Jan 04 03:00:02 2007 Jan 04 03:48:59 03bzhou * r5001 10optware/trunk/ (Makefile make/asterisk.mk): asterisk: got it working on slugosbe; stripped binaries Jan 04 04:13:26 03bzhou * r5002 10optware/trunk/make/py-turbogears.mk: py-turbogears: 1.0b1 -> 1.0 (skipped 1.0b2) Jan 04 06:22:28 morning all Jan 04 06:44:59 hey NAiL, hrw|gone is looking for selection advice for a NAS Jan 04 06:52:14 What are his requirements? Jan 04 06:52:47 03bzhou * r5003 10optware/trunk/make/py-urwid.mk: py-urwid: 0.9.7.1 -> 0.9.7.2; added py25 subpackage Jan 04 06:52:59 I'm terribly fond of the TurboStation-101, since it's fast/quiet/great software Jan 04 06:53:05 It also RSN has openprotium on it Jan 04 06:53:40 NAiL: quiet, hackable, supports Angstrom in the future. Jan 04 06:54:41 TS-101 has no moving parts except the HDD itself, already has a second-stage bootloader, work is being done on openprotium. Getting Ångström to work shouldn't be a too huge task. Jan 04 06:55:06 (Ie, the biggest task in that department probably is getting Ångström to compile correctly) Jan 04 06:56:02 how much is a ts101? Jan 04 06:56:43 I dunno. Here in Norway the distributor is so far the only one selling them, and they have inflated the prices to avoid end-users (requiring support) Jan 04 06:57:03 (and how come they haven't sent me a free one yet) Jan 04 06:57:13 Looks like it's USD$260 at newegg. Jan 04 06:57:21 IIRC, it's a tad more expensive that similar devices, but I think it's worth it. It's a quality device. Jan 04 06:58:11 They haven't sent anyone a free device yet. I'll ask again when I get optware running properly on it, and can give the distributor unrar :-P Jan 04 06:59:40 if they send me a free one, I'll get optware running on it. tell them I did the same for the FSG-3 a couple of months ago, so they're behind the market curve already all due to them not sending me one ... Jan 04 07:00:16 03bzhou * r5004 10optware/trunk/make/erlang.mk: erlang: do not dictate bigendian Jan 04 07:04:36 ok, keep nudi busy while i sleep, how nice Jan 04 07:04:51 g'nite Jan 04 07:05:53 * mwester steps in line behind rwhitby, as long as they're handing out free stuff ;) :D Jan 04 07:06:22 hehe Jan 04 07:06:27 NAiL has an FSG-3 he must not be using if he's doing all this TS101 stuff ;-) Jan 04 07:06:55 I'm not *hacking* much on the fsg-3, seeing as I don't have a serial-cable yet. Jan 04 07:07:11 yeah, me too :-) Jan 04 07:07:15 I was hoping on getting the fsg-3 running with a xdsl usb-modem Jan 04 07:07:35 do we have internal photos of the ts101 anywhere? Jan 04 07:07:46 hang on Jan 04 07:08:15 I know there are pics of the TS-201 Jan 04 07:08:30 Dunno about the ts-101 yet. I do have some lousy ones that happen to be on my memstick Jan 04 07:09:49 humm Jan 04 07:10:34 http://tech.ph.groups.yahoo.com/group/OpenTurbostation/photos Jan 04 07:10:45 There appears to only be 201 yet. Jan 04 07:11:11 ah, no. PCBS has of the TS-101 Jan 04 07:11:50 There are different hardware revs though. It's a bit much to walk through right now, since I should've started working 40 mins ago :-P Jan 04 07:12:34 heh Jan 04 07:13:49 Anyway, you know that I'll try to get you free ones ;) Jan 04 07:14:37 swet Jan 04 07:14:38 swet Jan 04 07:14:41 sweet Jan 04 07:14:50 * rwhitby thinks it's time to go home Jan 04 07:43:14 Is there anyone that has a linux box online that I could borrow a shell on for a few minutes? I'm behind a firewall, and need to open up ssh on another port on my server. Jan 04 07:43:41 (So I'll need ssh available on another port so I can log in to that and ssh to my server, set it up and log in directly) Jan 04 08:15:28 good morning Jan 04 08:22:37 morning Jan 04 11:58:46 morning, g2 Jan 04 11:58:56 <[g2]> morning NAiL ! Jan 04 12:01:27 hi [g2] Jan 04 12:03:13 <[g2]> hey hrw|work ! Jan 04 13:18:39 I have one question about intel 'read the bb file' recipes... Jan 04 13:20:13 cant them point to nowhere or file:// instead of not-existing url on intel.com? Jan 04 13:21:06 my source fetching script hit intel.com many times per hour because of those recipes Jan 04 13:29:33 that's a good idea, tbh Jan 04 13:29:46 I can't change that now though. Jan 04 15:47:46 Hello Jan 04 15:52:07 I am trying to install optware packages in my nslu2 ( I have unslung), but I can't because I have a message that says that I have to unslung to an external flash disk or hard disk Jan 04 15:53:16 Yes. Jan 04 15:53:38 Check to make sure that you are still booting off the external disk. Jan 04 15:54:27 mwester do I have to turn on my connect my HD and my Flash drive ? Jan 04 15:54:45 connect Jan 04 15:57:17 Yes. Once you have unslung, your NSLU2 is now dependent on the device to which you unslung it -- and that device must be connected and running at all times. Jan 04 15:57:59 If you boot the NSLU2 without the device to which you unslung it, then it boots up in "recovery" mode, assuming that you have a serious problem. Jan 04 15:58:17 ok Jan 04 15:58:42 so now I am going to connect the HD and flash drive and reboot Jan 04 15:58:44 ok? Jan 04 15:59:02 That should do it. And then just leave them all connected and running. Jan 04 16:00:25 mwester how I find the drive that has the unslung? or how do I move the unslung to a flash drive? Jan 04 16:02:30 what did you unsling to: disk1 or disk2 Jan 04 16:04:12 I think disk1 HD Jan 04 16:05:14 The easiest way to "move" it is to re-install it. Jan 04 16:06:18 mwester I can't login as root ( when I telnet nslu2) if I have the HD or flash drive connected Jan 04 16:07:00 You must use the password you provided when you unslung the device (ran the "unsling" command. Jan 04 16:08:06 mwester if i disconnect the HD and Flash drive I can login as root (with the password provided) but if I have the drives connected I can't Jan 04 16:11:11 Then you have a different password in the databases on the different devices. The "unsling" operation ensures that the password is changed on the internal flash of the NSLU2 (used when booting without devices), as well as on the device to which you unslung. Perhaps you have another device plugged into the NSLU2 that was formatted by the Linksys utility? Jan 04 16:11:32 yes Jan 04 16:12:22 Unplug that device and try again. Jan 04 16:12:40 * mwester means shut down, unplug, and reboot, then try again, of course! Jan 04 16:14:06 ok Jan 04 16:26:04 Tickey: perhaps this page can help explain some of the issues with multiple Linksys-formatted devices on the NSLU2: http://www.nslu2-linux.org/wiki/Unslung/WhichUSBPortforUnslung6 Jan 04 16:55:16 03oleo * r5005 10optware/trunk/ (3 files in 2 dirs): smartmontools: 5.36->5.37 Jan 04 17:03:27 03bzhou * r5006 10optware/trunk/ (Makefile make/gconv-modules.mk): gconv-modules: dummy package if on slugosbe Jan 04 17:04:12 03bzhou * r5007 10optware/trunk/make/snownews.mk: snownews: corrected DEPENDS line Jan 04 17:11:18 03bzhou * r5008 10optware/trunk/make/gconv-modules.mk: gconv-modules: create $(GCONV_MODULES_IPK_DIR)/CONTROL/ first Jan 04 17:20:19 03bzhou * r5009 10optware/trunk/make/tnef.mk: tnef: fixed cross malloc check; promoted for slugosbe and ds101 Jan 04 17:29:06 hrw: Mind fixing the URI in the ixp-stuff? Jan 04 17:29:33 I'm roughly 700km away from home, behind a rather restrictive firewall :-( Jan 04 17:29:45 NAiL: ok. will try to remember about it Jan 04 17:30:41 909.6km, more or less :-P Jan 04 17:31:00 nice ;D Jan 04 17:31:13 I'm at my next workplace Jan 04 17:31:26 == home Jan 04 17:34:12 nice Jan 04 17:34:17 I'd love to work from home Jan 04 17:34:26 technically, I can. Jan 04 17:35:42 but irst I need to buy new desk Jan 04 17:36:28 909.6km is a long commute to work each day, NAiL Jan 04 17:51:19 mwester: hehe. That'd be too far ;-) Jan 04 17:51:22 I'm just on a short assignment Jan 04 17:54:06 later guys Jan 04 17:58:33 03bzhou * r5010 10optware/trunk/make/cogito.mk: git-core: 1.4.4.2 -> 1.4.4.3; cogito: 0.18.1 -> 0.18.2 Jan 04 18:12:49 03bzhou * r5011 10optware/trunk/make/git-core.mk: git-core: 1.4.4.2 -> 1.4.4.3; cogito: 0.18.1 -> 0.18.2 Jan 04 20:13:38 mwester Jan 04 20:30:23 I'm trying to install optware packages in my nslu and I get this: Jan 04 20:30:43 No directory, logging in with HOME=/ Jan 04 20:30:57 -------- NOTE: RUNNING FROM INTERNAL FLASH -------- Jan 04 20:31:08 This system is currently running from the internal flash memory, Jan 04 20:31:08 it has NOT booted up into "unslung" mode from an external drive Jan 04 20:33:15 can someone help me? Jan 04 20:36:53 Tickey, maybe, but on a channel, where this is on topic, follow up to #nslu2-general Jan 04 20:37:29 ok caplink811-log Jan 04 21:06:03 Is anyone a lwn.net subscriber? Jan 04 21:10:47 03marceln * r5012 10optware/trunk/make/ (15 files): Updated maintainer comment and $Id$ tag. Jan 04 21:16:33 03bzhou * r5013 10optware/trunk/Makefile: tnef: fixed cross malloc check; promoted for slugosbe and ds101 Jan 04 22:38:44 03bzhou * r5014 10optware/trunk/make/py-moin.mk: py-moin: 1.5.5a -> 1.5.6 Jan 04 22:53:07 03oleo * r5015 10optware/trunk/make/hdparm.mk: hdparm: 6.1->6.9 Jan 04 23:43:43 03bzhou * r5016 10optware/trunk/ (4 files in 3 dirs): psmisc: added and promoted Jan 04 23:49:02 03bzhou * r5017 10optware/trunk/make/getmail.mk: getmail: 4.6.6 -> 4.6.7 **** ENDING LOGGING AT Fri Jan 05 02:59:59 2007