**** BEGIN LOGGING AT Tue Aug 09 23:59:56 2005 Aug 10 00:47:25 morning Aug 10 00:50:36 morning Aug 10 00:59:00 morning all Aug 10 00:59:25 morning RP Aug 10 01:00:52 morning RP Aug 10 01:01:08 When PCMCIA starts up it runs umount -v /dev/hda6 3 times. (hda6 is my root). Anyone have any ideas why this is happening? Aug 10 01:05:55 please, anyone? Aug 10 01:08:38 Is this on Spitz with pivotroot stuff? ISTR the PCMCIA init scripts try to unmount and then remount stuff. Aug 10 01:09:02 yes, spitz Aug 10 01:09:13 this only started happening today Aug 10 01:09:20 used to be able to reboot fine Aug 10 01:09:37 now when it comes up / is ro Aug 10 01:09:47 and when I try to remount it rw it says it has errors Aug 10 01:09:58 although I don't know *how* as I check for errors in my startuo Aug 10 01:10:09 I assume you've tried fsck? Aug 10 01:10:18 every startup, yes Aug 10 01:10:57 it *shouldn't* need it every time but what with it screwing up the time somehow... Aug 10 01:11:13 it almost always says it's >30000 days since my last fsck Aug 10 01:12:20 JustinP: probably because the date on Z was correct, on reboot it reverted to 1970 Aug 10 01:12:30 probably Aug 10 01:12:44 but that doesn't help my ro / problem... Aug 10 01:13:04 "NOTE: package libsdl-mixer-1.2.6: failed" ..anyone can confirm this or am i alone? Aug 10 01:13:15 yep, happens to me too Aug 10 01:15:00 any idea how to fix this? Aug 10 01:15:12 oh, and when I try to reboot it says "hda: lost interrupt" over and over... Aug 10 01:16:30 this may fix it, add this to the bb file Aug 10 01:16:32 do_compile_prepend() { Aug 10 01:16:32 # Force all -L(dir) output to be prepended with the staging libdir to stop libtool Aug 10 01:16:36 # from trying to link to host libraries. Aug 10 01:16:38 sed -i 's:-L\$:-L${STAGING_LIBDIR} -L\$:' ${S}/libtool Aug 10 01:16:40 } Aug 10 01:19:39 well if anyone has any ideas about my hdd problem please PM me Aug 10 01:41:51 morning folks Aug 10 02:02:07 good morning all Aug 10 02:02:58 hi koen Aug 10 02:06:39 morning koen Aug 10 02:07:22 koen: could I ask a favour - could you change the name of your tinderbox test client so that it isn't smack in the middle of the nslu2-linux variants :-) Aug 10 02:07:47 :) Aug 10 02:07:54 that's zecke's client Aug 10 02:08:11 oh, I saw ewi and assumed it was yours. Aug 10 02:08:28 I use "${MACHINE} ${DISTRO} " as the name Aug 10 02:08:34 but it's on the same machine Aug 10 02:10:54 hello, i need help with compiling rdesktop with bitbake for geodegx, am i right here? Aug 10 02:12:00 good morning Aug 10 02:12:14 morning Aug 10 02:13:57 mickey|sick: another party night? Aug 10 02:18:27 hi all Aug 10 02:19:28 Hi all, would the oe mailing list be appropriate for a question about failing "bitbake rdesktop" for geode Aug 10 02:19:52 ? Aug 10 02:19:59 dm: which version are you trying ? Aug 10 02:21:25 tried rdesktop-1.3.1-r0 and rdesktop-1.3.1cvs20050717-r1 Aug 10 02:21:55 I'm getting errors like such: "xwin.c:(.text+0x101c): undefined reference to `XOpenIM'" Aug 10 02:26:16 grr having problems with cvs at sf.net Aug 10 02:26:57 dm: I shall have to look into this, its one of my .bb Aug 10 02:34:51 I think it may have to do with linker-path settings? Do you need more information about my setup and/or log messages? Aug 10 02:35:13 dm: please Aug 10 02:36:49 ade|desk: how can I provide you the whole stuff. email? Aug 10 03:17:46 morning Aug 10 03:19:16 hi mickeyl Aug 10 03:25:50 mornin Aug 10 03:26:47 One question, There are some issues concerning building the first glibc (for jlime, sh3), Not sure the best way to fix it. Its just a matter of it not finding the right file (lookin in wrong dir) Aug 10 03:26:58 http://www.jlime.com/phpBB2/viewtopic.php?t=74 Aug 10 03:27:20 so far im fixing it manually but the glibc package should handle it, could possibly affect more machines Aug 10 03:27:45 hmm Aug 10 03:28:15 we need to have one of our resident glibc experts see this Aug 10 03:28:43 ibot: msg to pb_ hey pb_, when you have a chance, could you drop some wise comments about http://www.jlime.com/phpBB2/viewtopic.php?t=74 Aug 10 03:28:48 ibot: botmail to pb_ hey pb_, when you have a chance, could you drop some wise comments about http://www.jlime.com/phpBB2/viewtopic.php?t=74 Aug 10 03:29:22 ~shoot ecore Aug 10 03:29:29 dm: will take a look after lunch Aug 10 03:29:55 Ken|JLime: is the problem still there with an up to date OE? Aug 10 03:30:17 I notice the snapshot is ~4 months old Aug 10 03:33:43 ~lart raster and his configure files Aug 10 03:33:43 * ibot nabs the moon and broadsides raster and his configure files with the sea of tranquility Aug 10 03:33:53 heh Aug 10 03:33:54 x_cflags = -I/usr/X11R6/include Aug 10 03:33:56 grrr Aug 10 03:34:14 i have to jump through hoops to get it not to recognize local stuff Aug 10 03:34:35 it helps to flag all my local includes with #error Aug 10 03:34:35 hi mickeyl. Are you feeling better today? Aug 10 03:34:39 yes, thanks Dirk Aug 10 03:35:00 mickeyl: remember JustinPs comments about sedding out includes? Aug 10 03:35:30 yah, I'm just looking if I don't find a slightly more elegant way y:) Aug 10 03:35:50 ah here we are Aug 10 03:36:00 export x_cflags = "" Aug 10 03:36:04 that should do it Aug 10 03:38:22 koen, Its still there, just started (tree 1 day old) Aug 10 03:39:58 dm: what is your distro defined in local.conf ? Aug 10 03:40:44 dm: i dont think you are pulling in the right X11 libs Aug 10 03:41:05 he left ... balls! Aug 10 03:42:20 hehe Aug 10 03:51:42 "NOTE: package libsdl-mixer-1.2.6: failed" ..anyone can confirm this or am i alone? Aug 10 03:52:06 see bug tracker Aug 10 03:52:34 oh ok Aug 10 03:53:12 it's a complicated case with libsdl Aug 10 03:53:22 you mean qte Aug 10 03:53:45 no, actually this time I mean all the libraries that are buildable in different configurations which are not reflected in their resulting name Aug 10 03:53:46 it builds fine with a regular sdl Aug 10 03:54:07 it did build fine against qte before mithro broke it :D Aug 10 03:54:18 seriously, things would be much easier if we could say Aug 10 03:54:26 -lsdl-qt Aug 10 03:54:30 indeed Aug 10 03:54:37 same with a lot of libs Aug 10 03:54:41 imlib, evas, ecore Aug 10 03:57:55 ? Aug 10 03:58:03 what did i break? Aug 10 03:58:52 * mithro pokes mickeyl Aug 10 03:58:55 heh Aug 10 03:59:20 i havn't touched OE stuff in ages so I must have some type of super power i would like to find out about :P Aug 10 03:59:25 i think one of the patches against libsdl in the QtE flavour broke linking for some corner cases Aug 10 04:00:17 and yes, it's brobably broken since a long time :) Aug 10 04:00:27 then again, maybe zecke's patches b0rk it Aug 10 04:00:28 who nows Aug 10 04:00:34 knows, even Aug 10 04:01:17 zeckes patches fixed the sdl based apps Aug 10 04:01:38 unless you like sdlapps to be linked against qte Aug 10 04:01:47 zecke's patches are good Aug 10 04:01:54 the SDL_main stuff sucked big time Aug 10 04:02:32 it's necessary for arbitrary sdl apps linking against qte though Aug 10 04:02:47 otherwise you can't generate the QPEApplication object before init'ing the sdl-gfx Aug 10 04:02:51 which brings us the infamous Aug 10 04:02:59 QPainterDevice created before QApplication Aug 10 04:03:01 boom Aug 10 04:03:48 mickeyl: it's really simple to check if the QApp has been created before the QPainterDevice Aug 10 04:04:05 is that what you added? Aug 10 04:04:09 (the check) Aug 10 04:04:48 good morning phil Aug 10 04:05:11 good morning mickey Aug 10 04:05:32 thanks for your botmail Aug 10 04:05:38 where i can find macros definition like ${STAGING_LIBDIR} Aug 10 04:05:49 luzik: bitbake.conf Aug 10 04:05:56 mickeyl: th Aug 10 04:05:57 x Aug 10 04:06:58 pb_: you're the only resident glibc expert i know, so maybe you have an idea Aug 10 04:07:13 mickeyl: no zecke added that Aug 10 04:07:27 mickeyl: which meant you no longer needed the SDL_main crap Aug 10 04:08:01 it also means that you could have a program which never opened a display and it should still work right Aug 10 04:10:02 mickeyl: yah, I'll take a look Aug 10 04:10:10 mithro: does that mean SDL_Main stuff can be removed and sdl-qte and sdl-x11 become ABI compatible? Aug 10 04:10:21 for this libsdl-mixer can i temporary symplink libqte2 ? to ${STAGING_LIBDIR} ? Aug 10 04:11:18 XorA: yes Aug 10 04:11:46 mithro: this would be good to finish before 3.5.4 as it breaks mplayer Aug 10 04:12:06 XorA: it should already be finished, i thought Zecke had finished it Aug 10 04:12:40 mithro: last I checked _Dmain=SDL_Main was still coming out of the sdl-config sdl-qte makes Aug 10 04:13:04 mithro: but that was a while ago Aug 10 04:13:06 then i guess he mustn't have Aug 10 04:13:10 check with zecke Aug 10 04:13:18 but from what i understand that could just be a bug Aug 10 04:14:32 mithro: I will recheck as change may have been maybe after the last time I tried it Aug 10 04:14:56 hmmm, libsdl should be using binconfig its not Aug 10 04:17:12 mithro: I got this message with latest sdl-qpe when try to compile test app on ipaq Aug 10 04:17:44 mithro: mean QPainterdevice... Aug 10 04:28:50 i am looking for an imageviewer (x11 app) ?. does anyone know a light weight image viewer. i must be able to view .jpeg, .gif files Aug 10 04:29:56 i have xwindows and matchbox on my system Aug 10 04:30:19 eJumbo: imagemagick's display? Aug 10 04:33:39 eJumbo: gqview Aug 10 04:34:05 zecke: i have x windows and matchbox on my system. i just need some simple apps so that i can show it to customer. Aug 10 04:34:24 i am using open embedded to build my jffs2 file system. Aug 10 04:34:47 13:30 < zecke> eJumbo: imagemagick's display? Aug 10 04:36:00 zecke: i did not get u Aug 10 04:36:48 eJumbo: 'display' is a small light weight imageviewer (x11 app) Aug 10 04:37:02 eJumbo: it only depends on the libimagemagick Aug 10 04:37:14 I assumed that this app/set is known Aug 10 04:38:08 does oe support this package Aug 10 04:38:25 dont think it supports Aug 10 04:39:02 eJumbo: probably not, you could add it though Aug 10 04:56:10 Hi all.. Aug 10 04:56:34 Can monotone 0.22 be used, or should i stick to 0.21? Aug 10 04:58:03 wrobbie: ewi uses monotone 0.22 and it looks save Aug 10 04:59:04 k, thanks Aug 10 05:04:59 JustinP: Are recent OE kernel builds working for Spitz now btw? (I've just upgraded my HD / to a build from a few days ago, instead of the May build I'd been using, but haven't touched the kernel yet) Aug 10 05:08:27 bloody hell its a long time since i did an glibc build, takes ages Aug 10 05:19:52 Noodles: Which image are you using, gpe or opie? Aug 10 05:20:49 opie still. Aug 10 05:21:03 When I asked I was told PDA functionality was better under OPIE. Aug 10 05:21:16 I've built a GPE image too, just not run it. Aug 10 05:21:26 I haven't managed to get an opie build to complete with OE for a while, the last few kept failing with konqueror Aug 10 05:22:09 root@senmee:~# ipkg list | grep konq Aug 10 05:22:09 konqueror-embedded - 20030705-r3 - KDE Web Browser Konqueror, QtE based Palmtop Environments Edition Aug 10 05:22:39 Built 5th Aug. Aug 10 05:22:42 BigAl: might be the stupid pcre problem Aug 10 05:22:51 zecke: That's the one! Aug 10 05:23:00 Install pcre-dev on the build box. Aug 10 05:23:27 I'm currently trying to track down why OPIE's mail client doesn't want to talk to my IMAP server. Aug 10 05:23:53 I've tried to build a few GPE images too, they managed to build, but they don't work when I try them out on my spitz. Aug 10 05:24:05 How's the 2.6 progress? Aug 10 05:24:35 Slow. Been a bit busier with university stuff than last semester, unfortunately. I'm working on the keyboard driver at the moment. Aug 10 05:25:33 BigAl: what driver? Aug 10 05:26:13 zecke: I'm using RP's corgi kbd driver modified to hopefully make it work on the spitz, but it's not generating interrupts yet. Aug 10 05:27:43 ah kernel space, good lick Aug 10 05:27:45 luck Aug 10 05:27:47 *damn* Aug 10 05:28:20 Thanks! Aug 10 05:28:57 ~botmail for pigi: could you give me an update on the status of alsa for ipaq in OE? Aug 10 06:01:28 * RP hums to himself Aug 10 06:01:51 having RMK over for a tea? Aug 10 06:02:25 ... he's sharpening that axe Aug 10 06:02:26 I have a new project... Aug 10 06:03:00 linux mm? Aug 10 06:03:12 or removing rust from the mg? Aug 10 06:03:16 koen: don't suppose oe has a bb for mp3lame by any chance? Aug 10 06:03:21 I don't know if I should tell you or wait until you see the patches... Aug 10 06:03:28 * RP ponders Aug 10 06:03:42 Twiun: isn't that part of lame? Aug 10 06:03:49 Its not linux mm and the MG passed its MOT yesterday Aug 10 06:04:34 * koen is a bit bored and starts to guess Aug 10 06:04:37 koen: no idea - trying to find sources for mp3lame and was hoping I might get a lead :) Aug 10 06:04:46 RP: is it userspace? Aug 10 06:04:58 koen: partly :) Aug 10 06:05:19 It could certainly involve some userspace work Aug 10 06:06:09 does it have to do with (A)TI? Aug 10 06:06:37 Not at all... Aug 10 06:07:26 so it's software involving the kernel Aug 10 06:07:30 getting closer :) Aug 10 06:08:49 I'm not saying anymore. You'll probably find out sometime tonight depending on how soon I start working on it :) Aug 10 06:09:12 Twiun: libmp3lame or lame? Aug 10 06:09:49 Twiun: OE knows about libmp3lame Aug 10 06:10:21 koen: I know what RP is on about, nah nan nah na na nah Aug 10 06:10:34 oooow Aug 10 06:10:42 koen: well, I'm building ffmpeg, and its configure wants mp3lame (I imagine -dev)... so I'll try lame Aug 10 06:11:24 mallum: You knew about it before I did ;-) Aug 10 06:12:39 hmmmm.... more stuff on that gorgeous nokia device? Aug 10 06:14:21 that new Xorg replacement for Kdrive? Aug 10 06:14:50 XorA: you mean exa? Aug 10 06:15:00 koen: I made that up :-) Aug 10 06:27:57 if a binary is being stripped and it is using the wrong 'strip' how do you correct it so that it uses the strip in the build/tmp/cross/ etc etc ? Aug 10 07:13:04 ~lart Canon for they're lame printing driver stuff Aug 10 07:13:04 * ibot rm -rf's Canon for they're lame printing driver stuff Aug 10 07:13:09 their Aug 10 07:13:12 bleh Aug 10 07:13:33 NAiL: yeah canon sucks Aug 10 07:18:25 hi zecke Aug 10 07:18:32 i am getting this error when i make a bootstrap image: http://pastebin.ca/19706 Aug 10 07:19:18 http://www.thesmokinggun.com/archive/0805051sword1.html Aug 10 07:20:07 hi pb Aug 10 07:20:10 Hmmm. Aug 10 07:21:03 sounds like a familiar friend Aug 10 07:21:06 :-) Aug 10 07:22:38 ouch Aug 10 07:23:58 woglinde: hey Aug 10 07:24:19 he zecke Aug 10 07:24:21 http://www.netzwelt.de/news/70397-cebit-vorgestellt-siemens-dvbhhandy-concept.html Aug 10 07:24:53 dvb-h Aug 10 07:24:59 * koen shrugs Aug 10 07:25:39 koen: it runs Opie, shrug even more Aug 10 07:25:51 Is anyone using opie-mail? Aug 10 07:25:55 *wonders, why zecke and I didnt went to see this device" Aug 10 07:26:15 woglinde: I've seen it last week live, we can go to the IFA and see it Aug 10 07:26:56 zecke: opie or qtopia? Aug 10 07:27:31 koen: Opie <-> Concept Device Aug 10 07:27:58 zecke: cool Aug 10 07:28:51 zecke hm oh Aug 10 07:29:01 woglinde: ? Aug 10 07:29:12 zecke hm ifa Aug 10 07:29:30 woglinde: what IFA? We will go to the Siemens booth and look at it Aug 10 07:31:08 i am getting this error when i make a bootstrap image: http://pastebin.ca/19706 Aug 10 07:31:49 eJumbo: what does df -m say? Aug 10 07:33:05 i have 130MB free in / and 1.3GB free in /home Aug 10 07:33:32 do u think the problem is about insufficient space ? Aug 10 07:43:59 zecke: cant really resolve my problem . do u know what is wrong with my setup ? Aug 10 07:44:34 eJumbo: no, do you have that file in your oe tree? Aug 10 07:44:38 hi woglinde Aug 10 07:44:40 hi kergoth Aug 10 07:48:47 it has created a directory patches in my home directory and the file exits there Aug 10 07:49:06 i dont know whether my paths are correct. i am checking ... Aug 10 07:50:15 i think something seriously wrong all my patches are failing ? Aug 10 07:50:18 any ideas ? Aug 10 07:51:44 eJumbo: no patch command? Aug 10 07:51:47 eJumbo: what is BBPATH? Aug 10 07:51:52 eJumbo: Ive made that mistake before Aug 10 07:53:21 woo, employed Aug 10 07:53:35 /home/oe/scripts/oe/build:/home/oe/scripts/oe/openembedded Aug 10 07:53:36 kergoth: congrats Aug 10 07:54:13 yipee Aug 10 07:54:21 kergoth: what are you going to do? Aug 10 07:54:26 http://seeker.dice.com/jobsearch/servlet/JobSearch?op=101&dockey=xml/e/b/eb1b615258c9706ef2d8b4657328cfb2@activejobs0&c=1&source=1 Aug 10 07:54:35 zecke: my BBPATH is /home/oe/scripts/oe/build:/home/oe/scripts/oe/openembedded Aug 10 07:54:38 looks like mostly userspace coding on network appliances. load balancing of wan links, etc Aug 10 07:54:43 should be easy as hell Aug 10 07:57:33 woglinde: http://www.opensuse.org/index.php?title=Special:Listusers&limit=500&offset=0 Aug 10 08:01:26 hi Aug 10 08:07:48 ~lart samba Aug 10 08:07:48 * ibot runs at samba with an origami Swiss Army knife, and inflicts a nasty paper cut Aug 10 08:08:39 zecke : is my BBPATH wrong ? Aug 10 08:09:20 eJumbo: no looks good Aug 10 08:09:29 eJumbo: for some reason it can not find the patch it wants to apply Aug 10 08:10:18 which path name does it use it to get the patches ? Aug 10 08:11:14 sorry which environmental variable it uses to search for the directory which contains the patches Aug 10 08:11:43 eJumbo: it looks in the same path as the bb file is in Aug 10 08:12:34 what checks i should make to isolate the problem. Aug 10 08:12:56 use -DDD Aug 10 08:13:16 Noodles: yes, the new kernels are working....or rather I fixed my build to work. I'm not sure if it's been fixed in OE. There's a bug about it. You have to set KERNEL_CONSOLE to tty0 Aug 10 08:45:31 what should be the PYTHONPATH ? Aug 10 08:45:40 i have not installed bitbake ? Aug 10 08:46:43 PYTHONPATH could point to the lib/ directory of bitbake Aug 10 08:49:32 my BBPATH points to the build directory and the open embedded directory. is that enough or should it contain any other path locations ? Aug 10 08:49:59 eJumbo: it worked once, so it should be enough Aug 10 08:50:27 but, i get an error saying do_patchcmd failed ? Aug 10 08:50:35 i dont know what could be the problem ? Aug 10 08:51:45 dunno, it might be something obvious Aug 10 08:57:01 zecke: do you have next week some time to have a look on somethings I want to add to oe ? Aug 10 08:58:05 sure Aug 10 09:17:22 ljp: I want a Qt2.3.11 where is it? Aug 10 09:18:43 03nail 07org.oe.nslu2-linux * r45feaebd... 10/packages/ctorrent/ (files/configure.patch files/passkey.patch ctorrent_1.3.4.bb): Added alignment patch, passkey and configure patch. Aug 10 09:18:48 03koen 07org.oe.dev * r6ce2c0b3... 10/packages/meta/openslug-packages.bb: Add ifupdown to openslug-packages, needed for tunnels Aug 10 09:18:52 03rwhitby 07org.oe.nslu2-linux * r8724fc9d... 10/ (2 files in 2 dirs): Cleaned up openslug-packages, and added ctrlproxy. Aug 10 09:18:56 03dyoung 07org.oe.nslu2-linux * r874bcd50... 10/packages/ctrlproxy/ctrlproxy_2.6.2.bb: change the download location because the real source has a broken source file Aug 10 09:18:59 03koen 07org.oe.dev * rec05e389... 10/packages/gtkextra/gtk+extra_2.1.1.bb: Add gtk+extra 2.1.1 Aug 10 09:19:03 03koen 07org.oe.dev * r802b5c32... 10/packages/gimp/ (gimp_2.3.2.bb gimp_2.3.3.bb): gimp 2.3.2 -> gimp 2.3.3 Aug 10 09:19:07 03jbowler 07org.oe.nslu2-linux * r11bcf846... 10/packages/icecast/icecast_2.2.0.bb: Add missing DEPENDS on vorbis. Aug 10 09:20:27 pb_: ping Aug 10 09:25:16 mickeyl: at your service Aug 10 09:26:24 hey, i have a problem with shlib renaming Aug 10 09:26:31 probably a corner case Aug 10 09:26:34 or something else Aug 10 09:26:41 consider: Aug 10 09:26:46 Packaged contents of e-dev into /local/pkg/oe/spitz/tmp/deploy/ipk/libe-dlibev_20050810-r0_armv5te.ipk Aug 10 09:26:46 Packaged contents of e-examples into /local/pkg/oe/spitz/tmp/deploy/ipk/libe-libexampllibes_20050810-r0_armv5te.ipk Aug 10 09:26:46 Packaged contents of e into /local/pkg/oe/spitz/tmp/deploy/ipk/libe0_20050810-r0_armv5te.ipk Aug 10 09:26:59 the true name for this lib is 'libe' Aug 10 09:27:19 but after renaming it looks slightly broken Aug 10 09:31:38 oh dear, yes Aug 10 09:32:00 it's clearly doing a global replace of "e" with "libe", which is no good at all Aug 10 09:32:08 oh yea Aug 10 09:32:11 right Aug 10 09:32:22 probably just wants an ^ sticking on the front of a regex somewhere. Aug 10 09:32:23 it should replace it max 1 time Aug 10 09:32:29 or that, yeah Aug 10 09:32:51 ok, with that info i can fix it Aug 10 09:32:51 thanks Aug 10 09:33:21 I think this code in debian.bbclass is probably to blame: Aug 10 09:33:32 if pkg == orig_pkg: Aug 10 09:33:32 newpkg = pkgname Aug 10 09:33:32 else: Aug 10 09:33:32 newpkg = pkg.replace(orig_pkg, devname) Aug 10 09:33:49 might need to change that "replace" call into something more sophisticated Aug 10 09:34:12 if this is a string, we might just use Aug 10 09:34:22 pkg.replace(orig_pkg,devname,1) Aug 10 09:34:28 ah right Aug 10 09:34:30 assuming it replaces from left to right Aug 10 09:34:43 ok, sounds worth a try Aug 10 09:34:45 * mickeyl tries Aug 10 09:34:52 Noodles: altboot is ready for spitz so you can easily use file-images Aug 10 09:35:56 Packaged contents of e-dev into /local/pkg/oe/spitz/tmp/deploy/ipk/libe-dev_20050810-r0_armv5te.ipk Aug 10 09:35:56 NOTE: Not creating empty archive for e-examples-20050810-r0 Aug 10 09:35:56 Packaged contents of e into /local/pkg/oe/spitz/tmp/deploy/ipk/libe0_20050810-r0_armv5te.ipk Aug 10 09:36:01 excellent Aug 10 09:36:05 i'm committing this Aug 10 09:39:28 cool Aug 10 09:39:47 I added taglib to my OE last night. It fails to link on do_package but stages fine. I compiled the program dependant on it (eclair) and it compiled. To fix taglib I had to rename the libs in staging to have .so (they didn't have them). Taglib now packages but eclair won't compile. Any ideas? Aug 10 09:40:26 not without an error message Aug 10 09:41:05 ah forget that Aug 10 09:41:08 i reread your sentence Aug 10 09:41:25 no '.so' extension sounds like a failure in libtool or the -soname argument Aug 10 09:41:30 (to me) Aug 10 09:42:04 well I think libtag is using a different libtool than the rest.... Aug 10 09:42:20 but if I fix it eclair doesn't compile which is very strange... Aug 10 09:43:06 isn't taglib part of kde? Aug 10 09:43:21 and hence uses kde's hidious libtool? Aug 10 09:43:59 yes Aug 10 09:44:13 at least, I know it's "part" of kde ;-) Aug 10 09:45:51 I suppose there's probably something I can add to the build to fix this...but everything I tried to set didn't work Aug 10 09:46:41 I ended up doing a shell script....again Aug 10 09:51:38 03mickeyl 07org.oe.dev * r84e53671... 10/classes/ (autotools.bbclass native.bbclass): Aug 10 09:51:38 autotools.bbclass: add INHIBIT_AUTO_STAGE_INCLUDES Aug 10 09:51:38 native.bbclass: add INHIBIT_NATIVE_STAGE_INSTALL Aug 10 09:51:42 03mickeyl 07org.oe.dev * r2e85c9d7... 10/ (72 files in 23 dirs): Aug 10 09:51:42 Third (and hopefully last) EFL revamp before I hand over maintainership to Aug 10 09:51:42 Justin Patrin. We now have a efl.bbclass that contains common code for the Aug 10 09:51:42 various libraries. This makes it possible to have very clean and concise bb's. Aug 10 09:51:42 mickeyl: it's going to be....interesting merging my changes with whatever you end up comitting for e. I've been making more changes on my local branch to my hacked up _cvs files. I'll have to sit down for a day to make sure the OE tree has all my changes. ;-) Aug 10 09:51:46 03mickeyl 07org.oe.dev * r7326b443... 10/packages/cumulus/cumulus_cvs.bb: cumulus_cvs: fix SRC_URI Aug 10 09:51:49 JustinP: zecke got lost with kde's libtool too Aug 10 09:51:50 03mickeyl 07org.oe.dev * r8c0bbfe5... 10/packages/mpfr/ (mpfr-native_2.1.1.bb mpfr_2.1.1.bb mpfr_cvs.bb): mpfr: adjust SRC_URI Aug 10 09:51:54 03mickeyl 07org.oe.dev * r4ac45a31... 10/ (28 files in 9 dirs): E: misc cleanups and fixes all over to ensure a clean reproducability Aug 10 09:51:58 03mickeyl 07org.oe.dev * r0e631faf... 10/classes/debian.bbclass: Aug 10 09:51:59 debian.bbclass: replace package name only once to fix it for corner cases Aug 10 09:52:01 (libname appearing in right hand of package name, i.e. 'libe') Aug 10 09:52:03 03mickeyl 07org.oe.dev * rd1b2de7a... 10/ (6 files in 3 dirs): more EFL fixes + add the enlightenment library from the E window manager as dedicated library Aug 10 09:52:06 03mickeyl 07org.oe.dev * ra7553a96... 10/packages/e17/ (6 files in 3 dirs): Aug 10 09:52:08 add the enlightenment window manager + utilities Aug 10 09:52:10 large parts of these files are courtesy Justin Patrin who will be maintaining E in OE, thanks! Aug 10 09:52:12 hehe, funny you should commit that right now Aug 10 09:52:21 ok, now the most important E-things seem to be in place. there's just one problem left... for some packages, edje_cc fails for me and i think this is an upstream bug due to a long path or so. I'd be glad if someone could test this. Aug 10 09:53:05 i've done a lot of renames and stuff Aug 10 09:53:09 to get the things more consistent Aug 10 09:53:36 take a look at the efl.bbclass when you have a chance Aug 10 09:53:52 mickeyl: ok. I have most things working in my local branch. edje_cc and such all works fine for me, it's just the linking against incorrect libraries which happens to me. (No I haven't updated my branch since you made your changes.) Aug 10 09:54:18 yeah, it worked for me previously as well, that's why i suspect a too long path or something else Aug 10 09:54:26 ok Aug 10 09:54:27 03coredump 07org.oe.dev * r2269487a... 10/packages/altboot/ (altboot.bb files/altboot.func files/init.altboot): altboot: Fix /etc/altboot.rc scanning and adjust the "Master Password" notice to 240x320 screens Aug 10 09:55:12 CoreDump|home: I think that if you choose the "shell" option and enter the PW then reboot it will go into shell without password... Aug 10 09:55:25 mickeyl: did you fix the linking problems? Aug 10 09:55:45 JustinP: heh, nice one. Aug 10 09:55:48 * CoreDump|home tries Aug 10 09:55:57 JustinP: i did my very best Aug 10 09:56:16 JustinP: i had to do some fixes to autotools class Aug 10 09:56:20 and to native.class Aug 10 09:56:24 koen: yeah....well, I "fixed" it with some creative shell scripting (to rename the libs) I'm trying a fresh build now to see if eclair was using a bad cache or something Aug 10 09:56:29 the default behaviour is not ok for us Aug 10 09:56:38 mickeyl: ok, thanks. I'll try to test it all out Aug 10 09:56:44 cool Aug 10 09:56:47 default behavior for....? Aug 10 09:56:59 automatic staging by oe_runmake install Aug 10 09:57:09 automatic staging of includes Aug 10 09:57:14 oh Aug 10 09:57:23 yeah, I had to put those all in manually, yeah Aug 10 09:57:35 since I last worked on E, some people added calls in those classes Aug 10 09:57:42 which made everything stepping over each others toes Aug 10 09:57:42 so the efl class should automate the staging now? Aug 10 09:57:48 so it was no wonder everything broke Aug 10 09:57:49 heh Aug 10 09:58:05 efl automates staging for 80% of efl Aug 10 09:58:19 in some special cases i had to write specific do_stage_appends Aug 10 09:58:29 ok Aug 10 09:58:40 note that you really need to start with a clean staging dir Aug 10 09:58:48 one of my tests was: Aug 10 09:58:50 rm -rf tmp Aug 10 09:58:54 bitbake entrance Aug 10 09:59:05 if that works through, most things seem towork Aug 10 09:59:11 yeah, I think some of my problems were due to strange things in staging Aug 10 09:59:58 JustinP: just checked. Password must be entered even after auto-booting the entry Aug 10 10:00:32 hmmm....I could swear mine did it. Oh well. Aug 10 10:00:37 thanks for checking Aug 10 10:00:47 np Aug 10 10:00:56 anyone in here know anything about the pcmcia system? Aug 10 10:01:22 ok, enough PC for today Aug 10 10:01:23 l8er Aug 10 10:01:27 cu Aug 10 10:03:00 later, thanks Aug 10 10:06:11 hmm anyone wanna read about IP design and FPGA/CPLDs ? Aug 10 10:06:37 seems thats this weeks article in FPGA Journal Aug 10 10:07:16 RP: do you know why the kernel would be saying "hda: lost interrupt"? Aug 10 10:09:28 I've seen that when PCMCIA has tried to free the resources associated with the CF HD. Aug 10 10:10:11 Noodles: do you have *any* idea why I'm having these pcmcia issues? It's really freaking me out...I'm worried that there's something wrong with my HD. Aug 10 10:10:46 What are you doing when they happen? Aug 10 10:11:07 well the lost interrupt thing happens when I "init 6" Aug 10 10:11:17 the remounting ro happens on boot when pcmcia starts Aug 10 10:11:26 "umount -v /dev/hda6" x3 Aug 10 10:12:27 Does your /etc/init.d/pcmcia do the kill -9 on stop ok? Aug 10 10:12:42 Noodles: I don't know what you mean... Aug 10 10:12:52 * JustinP knows nothing so far about the pcmcia system Aug 10 10:12:59 Under "stop)" it should have "kill -9 $PID". I think on non-spitz it has "kill $PID". Aug 10 10:13:07 What does yours have? Aug 10 10:13:15 oh...one sec Aug 10 10:13:24 booting again...another fsck.... Aug 10 10:14:30 how can I fix the time when booting? This "49710 days without being checked" is ridiculous Aug 10 10:14:39 * JustinP makes a note to try "sltime" perhaps.... Aug 10 10:15:04 sltime? Aug 10 10:15:12 in slutils Aug 10 10:15:43 mickeyl made them. He says it's not needed any more as another time mechanism is used....I Aug 10 10:16:12 so you know how the time is saved / fixed right now? I'm thinking it should work before the pivot to fix fsck problems Aug 10 10:16:35 ok, it's pivoting, I'll be up momentarily Aug 10 10:17:16 I didn't know there was a real time saved on the Z we could use on boot. That would make things better. :) Aug 10 10:17:28 I *think* there is.... Aug 10 10:19:22 argh...diff truncated.... Aug 10 10:19:24 oh well Aug 10 10:19:31 * CosmicPenguin hugs tinderbox Aug 10 10:19:43 heh Aug 10 10:20:06 most pda should have a clock ... kind of needed to store time when batteries etc are not enough to run the device Aug 10 10:20:55 Ah. sltime stores the time/date into mtd. Aug 10 10:21:05 JustinP: the time haxory was done in /etc/bootmisc.sh IIRC Aug 10 10:21:09 bbl Aug 10 10:21:49 ok, well, I commented out the "umount -v ..." line in /etc/pcmcia/shared Aug 10 10:21:57 and it booted ok Aug 10 10:22:05 still looking into the real problem, though Aug 10 10:22:48 CoreDump|bbl: I have "kill -9 $PID" Aug 10 10:25:18 Noodles: Ihave "kill -9 $PID" Aug 10 10:25:24 CoreDump|bbl: sorry, that was for Noodles Aug 10 10:28:46 Hmmm. That should do it ok. Aug 10 10:29:33 I think my problem is on boot, not reboot Aug 10 10:29:49 if I can figure out why it's remounting my / ro then I think it should all be fixed Aug 10 10:31:56 CoreDump|bbl: Are you sure you want to change \\\\.sh to \.sh? I believe that will match "blahsh". Or maybe I only tried \\ and not \... Aug 10 10:37:12 well...it' must be calling "/etc/pcmcia/ide stop"....hmmm Aug 10 10:48:09 gb2, or anyone else ... you ever done and flow control devices/ Aug 10 10:48:11 ? Aug 10 10:48:14 any* Aug 10 10:54:39 flow control devices? Aug 10 10:56:00 yeah Aug 10 10:56:30 i think i'll see if i can get some from work ... having a problem finding affordable devices Aug 10 10:57:11 basicly they are just a pot with an inlein and outlet and a little "fan/wheel" in the center Aug 10 10:57:17 inlet* Aug 10 10:57:21 oh, never dealt with anything like that Aug 10 10:57:36 so as the fluid passes it turns the wheel Aug 10 10:57:43 ah Aug 10 10:57:55 heh, when you say flow control i think xon/xoff and rts/cts and that sort of thing :P Aug 10 10:58:20 yeah ... the ones i can get through work are espresso machine ones for ~$40 any others i've found are $150 Aug 10 10:58:46 anyway Aug 10 10:58:57 anyone know the website url for Pixel ? Aug 10 10:59:03 i seem to have lost it Aug 10 11:00:08 hmmmm Aug 10 11:00:09 cp: cannot stat `/home/koen/OE/monotone/openembedded/packages/efl/evas/fix-configure.patch': No such file or directory Aug 10 11:00:21 aha i think i found it ... Aug 10 11:00:53 koen: I think mickey's SRC_URI's got confused Aug 10 11:00:59 hmm nope .. Aug 10 11:01:12 koen: I'm not quite ready to start testing the current efl stuff in OE. will be in a little bit Aug 10 11:01:30 you rang? Aug 10 11:01:30 hey did zecke_ push that patch for autoconf? Aug 10 11:01:44 speaking of trying to compile Aug 10 11:01:45 ah, guess i forgot to commit a file Aug 10 11:01:45 mickeyl: 20:00 < koen> cp: cannot stat `/home/koen/OE/monotone/openembedded/packages/efl/evas/fix-configure.patch': No such file or directory Aug 10 11:02:44 mickeyl: you also seemed to rename the ecore configure fix patch a few times in the SRC_URI Aug 10 11:03:24 ok, entrance and E seem to work great Aug 10 11:03:25 however Aug 10 11:03:29 my mouse is fscked Aug 10 11:03:39 any idea what could destroy ts calibration? Aug 10 11:03:50 rerunning xtscal didn't help :/ Aug 10 11:04:05 mickeyl: which Z? Aug 10 11:04:09 Spitz Aug 10 11:04:20 mickeyl: are you using the new xtscal and Xserver files? Aug 10 11:04:26 new? Aug 10 11:04:31 mickeyl: are your axes incorrect? Aug 10 11:04:47 no, the axes are right, i just can't reach the full height Aug 10 11:04:53 mickeyl: or is it ~1" below the cursor? Aug 10 11:05:01 yes, that's it Aug 10 11:05:06 I get that randomly Aug 10 11:05:09 rotate Aug 10 11:05:10 hmm Aug 10 11:05:12 then rotate back Aug 10 11:05:15 and it's fixed Aug 10 11:05:20 how do i rotate? Aug 10 11:05:22 <--- x newb Aug 10 11:05:29 /usr/bin/xrandr-panelapp.sh Aug 10 11:05:41 mickeyl: didn't autotools_stage_includes work for staging the headers? Aug 10 11:05:52 (efl.bbclass) Aug 10 11:06:17 * JustinP also has auto-rotate working in X but I haven't submitted any of it to anyone yet... Aug 10 11:06:20 koen: i had problems with all automatic stuff Aug 10 11:06:37 koen: in theory this is a good thing, however it doesn't work for packages which don't honor DESTDIR Aug 10 11:06:42 03mickeyl 07org.oe.dev * r9382a38f... 10/packages/ (4 files in 3 dirs): E: commit missing files Aug 10 11:06:43 koen: yeah, the headers/libs neber got installed with the autotools stuff Aug 10 11:06:43 I see Aug 10 11:06:56 neber.... Aug 10 11:07:02 neber eber... Aug 10 11:07:08 * JustinP smacks himself Aug 10 11:07:14 heh Aug 10 11:08:16 hmm Aug 10 11:08:17 nice Aug 10 11:08:25 ts_calibrate crashes my Z Aug 10 11:08:33 lol Aug 10 11:08:33 the display turns white and then it hangs Aug 10 11:08:41 *sigh Aug 10 11:08:43 reboot again Aug 10 11:08:59 you could always ask raster how he setup the mouse on his Z Aug 10 11:09:20 i don't think it's x related Aug 10 11:09:21 http://ewi546.ewi.utwente.nl/drupal/?q=ipkgfind&action=section§ion=e/libs <- the list grows and grows Aug 10 11:09:22 s/x/E/ Aug 10 11:09:23 i know he was/is using e17 .... Aug 10 11:09:48 ~praise Sharp for a reset button Aug 10 11:09:48 All hail Sharp for a reset button! Aug 10 11:09:50 emte: it works for me. I have the same problem with GPE, so it's not E, it's X. Aug 10 11:09:58 ah Aug 10 11:10:06 and it's only sometimes... Aug 10 11:10:11 now if it wouldn't be inside the battery compartement it would've been even better Aug 10 11:10:34 mickeyl, prevents that bad ipaq "mistaken reset" Aug 10 11:10:48 mickeyl: inside the battery compartment...? the C3000 only need the battery removed and put back to reset Aug 10 11:11:01 I always 'accidentaly' poke a stylus in the bottom of my ipaq.... Aug 10 11:11:23 brb Aug 10 11:11:25 lol Aug 10 11:11:43 i occasionally drop it in my toolbox Aug 10 11:11:59 and it "magically" resets to the install image ... Aug 10 11:12:05 WTF Aug 10 11:12:06 stupid thing Aug 10 11:12:11 now my axes are wrong Aug 10 11:12:16 hmm Aug 10 11:12:26 ~lart xtsca Aug 10 11:12:27 * ibot offers xtsca some herring Aug 10 11:12:27 l Aug 10 11:12:34 mickeyl, which way? Aug 10 11:12:52 horz is vert Aug 10 11:12:54 and vice versa Aug 10 11:13:04 okay thats not e then Aug 10 11:13:14 there was an axis change a while ago Aug 10 11:13:29 was inverted and shifted Aug 10 11:14:00 argh Aug 10 11:14:03 ~lart me Aug 10 11:14:03 * ibot whacks mickeyl with the cluebat Aug 10 11:14:11 hmm Aug 10 11:14:19 when I installed E I accidantly upgraded one of the X packages Aug 10 11:14:20 *sigh* Aug 10 11:14:38 * emte tries to remember who pointed out pixil/pixel ... Aug 10 11:14:48 CosmicPenguin? Aug 10 11:15:07 i cant remember but i cant find the website :( Aug 10 11:15:23 i thought i book marked it Aug 10 11:15:30 you mean pixil.org? Aug 10 11:15:53 no Aug 10 11:16:01 imaging software Aug 10 11:16:24 they have a discount license right now Aug 10 11:16:34 they are shipping the final version in aug Aug 10 11:16:41 er maybe its sept Aug 10 11:16:47 anyway the price doubles Aug 10 11:18:27 and i am pretty sure it wasnt the Mentalix one Aug 10 11:22:31 * mickeyl tries bitbake e-image Aug 10 11:23:13 /home/koen/OE/build/tmp/familiar/staging/i686-linux/lib/libevas.so: undefined reference to `png_set_strip_16@PNG12_0' Aug 10 11:23:21 * koen wipes TMPDIR Aug 10 11:23:32 that's native Aug 10 11:23:44 did we upgrade png recently? Aug 10 11:23:52 well, wiping TMPDIR is always good ;) Aug 10 11:24:14 I do it atleast 10 times a day Aug 10 11:24:18 (no kidding) Aug 10 11:24:22 same here Aug 10 11:24:34 there's no other way to make sure deps, rdeps and stuff is ok Aug 10 11:24:56 On the other hand my tmpdir on this server has been there since march ;-) Aug 10 11:25:07 I never do full builds from it though Aug 10 11:25:59 btw. Aug 10 11:26:06 * mickeyl bitbake opie-image/c7x0 Aug 10 11:26:17 mickeyl: my tinder.sh wipes tmp Aug 10 11:27:45 mickeyl: exis problem has been fixed in OE AFAIK Aug 10 11:27:57 it was fixed for my local branch anyway...I thought it was submitted Aug 10 11:28:20 k Aug 10 11:28:26 yu have to alter /etc/X11/Xserver to have -screen 640x480@270 for the Spitz and add an entry for the spitz in /usr/bin/xtscal Aug 10 11:28:27 I'll check with a full rebuild Aug 10 11:28:46 search the OE-commits list for xtscal and Xserver Aug 10 11:28:48 *oh* Aug 10 11:29:08 and cvs-update-gpe Aug 10 11:29:09 I think it was submitted for just Akita for xtscal. I asked for it to be added for spitz but I don't htink it happened...one sec, let me check Aug 10 11:29:40 k Aug 10 11:30:54 come on....verify.... Aug 10 11:38:13 nice thought about SCMs: http://log.ometer.com/2005-08.html#10 Aug 10 11:40:03 mickeyl: am I not in your DB for push? I'm trying to push the xtscal fix Aug 10 11:40:10 you are Aug 10 11:40:14 hmmm.... Aug 10 11:40:33 hold on, i attach to the server log and have a look when you push Aug 10 11:40:47 perhaps it's trying to push my branch Aug 10 11:40:50 attached Aug 10 11:41:18 there we go Aug 10 11:41:21 I had to specify the branch Aug 10 11:41:29 you should have the xtscal fix in a sec Aug 10 11:41:33 excellent Aug 10 11:41:59 btw CoreDump|home ... or was it CosmicPenguin ... anyway i figured out how to make Hg not need user accounts for access, i just needeed to read the right docs Aug 10 11:42:15 yay, my first commit ;-) Aug 10 11:42:20 koen mentioning SCM just reminded me Aug 10 11:42:27 BTW, if you want auto-rotate I can help you with that as well Aug 10 11:42:48 03justinp 07org.oe.dev * rf0b65fc0... 10/packages/xtscal/ (xtscal/xtscal-spitz.patch xtscal_0.6.3.bb): Fix xtscal for spitz (probably also needs to eb done for akita) Aug 10 11:43:03 heh, and I typo.... Aug 10 11:43:08 heh Aug 10 11:43:09 * koen watches bootldr flash a new image Aug 10 11:43:12 first commit, first error :) Aug 10 11:43:17 please do it also for akita Aug 10 11:43:29 all display and keyboard issues are 100% the same Aug 10 11:43:40 * JustinP wonders if he can just edit the patch by hand.... Aug 10 11:43:44 you can Aug 10 11:43:46 wasn't akita upstreamed? Aug 10 11:43:49 * mickeyl does that all the time Aug 10 11:43:59 * koen uses sedscripts Aug 10 11:44:05 who needs patches? Aug 10 11:44:15 heh Aug 10 11:44:20 see qte-2.3.10 Aug 10 11:44:27 see openzaurus-kernel-2.6.13 Aug 10 11:44:32 do that with sed scripts .) Aug 10 11:45:01 ok, maybe a bit of awk is needed ;) Aug 10 11:45:12 hehe Aug 10 11:45:25 me needs one for autoconf Aug 10 11:45:33 but zecke_ has it Aug 10 11:45:55 hows E coming? =) Aug 10 11:46:36 looks like JustinP is getting the pc version working Aug 10 11:47:09 PC? Aug 10 11:47:25 * koen looks around Aug 10 11:47:28 pc/workstation Aug 10 11:47:29 no pc here Aug 10 11:47:43 lol Aug 10 11:47:44 CoreDump|home: I'll be looking into mickeyl's changes later today and putting some of my recent changes back into the bb files. Also test, of course. ;-) Aug 10 11:47:57 did :) Aug 10 11:48:03 emte: I'm working on E for my Spitz...(all OE devices ;-) Aug 10 11:48:16 b0rked on evas-x11 w/ a missing header Aug 10 11:48:31 your still going to have to handle the touchscreem/mouse issue at some point Aug 10 11:49:09 emte: I figure a module which does the same as xmonobut. Allows switching of the mouse button Aug 10 11:49:52 well as long as you dont bind to x11 Aug 10 11:49:55 xmonobut works fine with engage Aug 10 11:50:02 works fine with all of E. Aug 10 11:50:10 I just start up matchbox-panel when I need it ;-) Aug 10 11:50:19 I also have engage but it's not working quite right yet Aug 10 11:50:30 * JustinP needs to go, bbl Aug 10 11:50:31 it propably needs some e-apps Aug 10 11:50:55 koen: I added some. It's making the BG all black and blotting out the rest of my E stuff Aug 10 11:51:02 there are very few e17 apps atm Aug 10 11:51:10 03justinp 07org.oe.dev * r53a42081... 10/packages/xtscal/ (3 files in 2 dirs): Make xtscal work for Akita as well. We'll need another fix once we know the 3100's name Aug 10 11:51:11 eapps Aug 10 11:51:15 the iconsets Aug 10 11:51:22 JustinP: borzoi Aug 10 11:51:24 JustinP: why didn't you ask? :) Aug 10 11:51:25 ~borzoi Aug 10 11:51:26 somebody said borzoi was the Sharp SL-C3100, or a dog (see http://www.dogbreedinfo.com/borzoi.htm ) Aug 10 11:51:27 ~borzoi Aug 10 11:51:32 oh...sorry..... Aug 10 11:51:36 * JustinP needs to run, though Aug 10 11:51:40 hehe Aug 10 11:51:41 cu Aug 10 11:51:42 thanks Aug 10 12:09:35 emte: good news on Hg - how soon till you have a public repo? Aug 10 12:09:37 :) Aug 10 12:09:53 hmm Aug 10 12:10:06 i should talk to my server admin Aug 10 12:10:39 also it seems the monotone translation is only 1/2 done Aug 10 12:10:51 you can submit from Hg to monotone Aug 10 12:11:03 but it doesnt work fully the other way ... Aug 10 12:12:16 hmm Aug 10 12:12:21 i thik i broke xmms Aug 10 12:27:45 hey CosmicPenguin if you want to see the server setup page its: http://www.serpentine.com/mercurial/index.cgi?ServerInstall Aug 10 12:28:04 lets look at the tailor scripts Aug 10 12:28:12 see what monotone needs Aug 10 12:28:52 * emte now wonders where i put my python book ... Aug 10 12:30:09 hmm Aug 10 12:30:19 doesnt look like it would be too bad ... Aug 10 12:31:15 i wonder ... Aug 10 12:31:38 might just be as simple as an hg addremove; hg commit Aug 10 12:32:18 anyone know of a very small monotone repo? Aug 10 12:32:55 make your own and see Aug 10 12:33:17 hmm Aug 10 12:33:33 i hope there is a quick way Aug 10 12:34:31 is monotone relative or absolute for --db ? Aug 10 12:34:36 setting up a monotone repo is really easy Aug 10 12:34:37 when creating? Aug 10 12:34:49 it's always an absolute path Aug 10 12:34:53 k Aug 10 12:35:12 emte: branch net.hentges.hentgesdev @ hentges.net, used it to test some stuff Aug 10 12:36:41 * koen|slug hugs irssi Aug 10 12:48:03 nice Aug 10 12:48:11 looks liek they behave well ... Aug 10 12:48:22 the data duplicity might be an issue ,,, Aug 10 12:48:32 wonder if i can get rid of it Aug 10 12:49:18 actually Aug 10 12:49:24 funny funny Aug 10 12:51:09 could do a remote commit and push it Aug 10 12:51:59 if its just a monotone->hg mirror one direction the tailor script isnt needed Aug 10 12:52:45 i'll see what my admin says tonight Aug 10 12:59:10 I need to run make instal in do_stage Aug 10 12:59:28 shoudl I set the vars to overide with EXTRA_OEMAKE Aug 10 12:59:29 and Aug 10 12:59:40 oe_runmake install Aug 10 12:59:42 ? Aug 10 13:00:11 Crofton: do you use autotools? Aug 10 13:00:12 ? Aug 10 13:00:26 hey zecke !! Aug 10 13:00:28 Crofton: there is something like automake_stage or such Aug 10 13:00:29 hey Aug 10 13:00:32 yes, but they auto stuff is somewhat busticated Aug 10 13:00:34 can i have your autoconf patch? Aug 10 13:01:13 it uses autoconf, but not automake Aug 10 13:01:32 so I need to override crap in the makefile to make stagin go the right place, amongst other pain Aug 10 13:01:55 Crofton, then you sorta do it manually Aug 10 13:01:56 oe_runmake sets DESTDIR Aug 10 13:02:01 sec i'll give you an example Aug 10 13:02:20 do_stage () { Aug 10 13:02:20 for p in ${parts}; do Aug 10 13:02:20 dir=`echo $p|tr A-Z a-z` Aug 10 13:02:20 install -m 0644 ${S}/src/lib/$dir/$p.h ${STAGING_INCDIR}/ Aug 10 13:02:20 oe_libinstall -C src/lib/$dir lib$dir ${STAGING_LIBDIR}/ Aug 10 13:02:20 done Aug 10 13:02:23 install -m 0644 ${S}/src/lib/ecore/Ecore_Data.h ${STAGING_INCDIR}/ Aug 10 13:02:25 install -m 0644 ${S}/ecore.m4 ${STAGING_DATADIR}/aclocal/ Aug 10 13:02:27 } Aug 10 13:02:44 hang on Aug 10 13:03:13 http://pastebin.ca/19748 Aug 10 13:03:59 I need to override the INSTALL{INC,LIB,BIN}DIR locations for staging Aug 10 13:04:11 Crofton: last month or even the month before Aug 10 13:04:20 Crofton: code like this was added to autotools.bbclass Aug 10 13:04:51 this is from the omniORB makefile Aug 10 13:06:16 so DESTDIR gets set to $STAGINGDIR/TARGET_SYS Aug 10 13:06:31 and stuff ends up in usr/lib in staging Aug 10 13:06:48 then I have trouble with configure finding them on next bb file ... Aug 10 13:08:47 Crofton, the example i put abouve gives prety specific staging destinations Aug 10 13:09:13 I am trying to avoid rewirting the entire install procedure Aug 10 13:09:29 * JustinP kicks himself for the borzoi thing...then throws himself out the window for listening to mickeyl about the reset button Aug 10 13:09:38 mickeyl|tv: what does that reset button do?? Aug 10 13:09:38 lol Aug 10 13:09:53 hmmm, maybe there is a way Aug 10 13:09:59 mickeyl|tv: it corrupted my boot partition and my bootloader. Aug 10 13:10:02 should reset to the bare install image Aug 10 13:10:13 emte: nope...doesn't seem to do anything of the sort.... Aug 10 13:10:14 there .in file this comes from isn't hopeless Aug 10 13:10:21 I tried a nand restore and it still doesn't boot Aug 10 13:10:46 perhaps you guys are avoiding installing in that area Aug 10 13:10:50 I can use D+B to boot, then init 6 and it boots "normally" now but a simple power-on gives a flicker then nothing Aug 10 13:17:37 wait for it.... Aug 10 13:18:00 give it some jtag love? Aug 10 13:18:01 :P Aug 10 13:18:07 03justinp 07org.oe.dev * refe58477... 10/packages/ (5 files in 3 dirs): Aug 10 13:18:07 Add Borzoi to xtscal cxk patch Aug 10 13:18:07 Combine gpe-dm Xserver patches for Spitz and Akita and add Borzoi Aug 10 13:18:30 emte: I have no clue...I've never touched those things.... Aug 10 13:18:43 which? jtag? Aug 10 13:18:50 damn it....everything all at once....first my HD acts up and now I can't boot right Aug 10 13:18:51 yeah Aug 10 13:18:54 ah Borzoi is another SHarp device... Aug 10 13:19:05 the 3100 Aug 10 13:19:09 jatag is pretty handy for embedded devices Aug 10 13:19:11 128MB flash + microdrive Aug 10 13:19:14 can't they give devices straight numbers NMCI-3200XL... Aug 10 13:19:17 I have done no hardware hacking and know nothing about jtag Aug 10 13:19:30 zecke: yes? Aug 10 13:20:06 * emte kicks autoconf and emacs stupidity Aug 10 13:20:17 hehe Aug 10 13:20:25 * JustinP has an emacs ipk if you want it Aug 10 13:20:31 lol Aug 10 13:20:36 that doesnt help with bitbake Aug 10 13:20:40 but thanks Aug 10 13:20:42 oh that ;-) Aug 10 13:21:36 did you try install emacs instead of xemacs? Aug 10 13:21:38 hmm Aug 10 13:21:46 maybe i can force an older autoconf ... Aug 10 13:21:57 wonder how much taht would break Aug 10 13:24:48 * JustinP gets some popcorn Aug 10 13:24:59 emte: you *can* install emacs without X.... Aug 10 13:25:55 emacs is sintalled Aug 10 13:26:00 so is xemacs Aug 10 13:26:10 doesnt solve my problems Aug 10 13:26:27 some reason it cant compile the emacs binary test Aug 10 13:26:40 emacs cant compile the emacs binary test * Aug 10 13:26:45 i should say Aug 10 13:27:16 how fun Aug 10 13:27:23 yeah Aug 10 13:29:28 whew...I reflashed the kernel and now my Z boots again Aug 10 13:29:32 now to get altboot back up Aug 10 13:39:58 Heh - I just spent half a day trying to figure out why a variable didn't change in OE when I changed it in the environment Aug 10 13:40:06 Lord help me, I'm just not that bright Aug 10 13:43:57 Crap - I thought that got fixed Aug 10 13:44:40 what? Aug 10 13:45:05 cya Aug 10 13:45:09 The variable cache not changing Aug 10 13:45:24 I thought koen or zecke or somebody had fixed it so CVSDATE would change Aug 10 13:45:25 CosmicPenguin: svn up your bitbake :} Aug 10 13:45:36 Its brand spankin' svned up Aug 10 13:46:29 remove the cache once Aug 10 13:46:38 did that too Aug 10 13:47:25 one more time for good luck, though Aug 10 13:47:30 hmm Aug 10 13:47:42 i think i broke monotone too ... Aug 10 13:47:47 not updating Aug 10 13:48:01 oh wait wait Aug 10 13:48:12 its just pathetically slow Aug 10 13:48:43 Hello and welcome to "Everything Is Broken Day"! On EIBD we try to break as much as possible, just to give people something to do. Aug 10 13:48:52 * emte gets out and pushes the monotone datastream Aug 10 13:49:43 whohoo it got to 2 Aug 10 13:49:50 only 71 left to go Aug 10 13:50:36 more like 40 Aug 10 13:50:47 I'm nearly certais it will stop around 38 Aug 10 13:50:50 monotone: 217.1k | 50.5k | 218 | 73 | 4 Aug 10 13:50:50 certain Aug 10 13:52:14 why 38? Aug 10 13:52:50 sigh Aug 10 13:52:50 you make 33 duplicate revs? Aug 10 13:52:57 because when there's a large # of revisions it tends to stop just above half for me Aug 10 13:53:03 ah Aug 10 13:53:11 * CosmicPenguin relucantly tosses in a rm -rf tmp/cache in the script Aug 10 13:53:19 probably it's merges which duplicate revisions, yeah... Aug 10 13:53:46 just need it to update so i can push it to hg Aug 10 13:53:54 ah Aug 10 13:54:01 I thought you said it doesn't fully work Aug 10 13:54:13 imight not need it to Aug 10 13:54:27 dont plan to push things the other way Aug 10 13:54:37 which actually does work Aug 10 13:54:58 ..... Aug 10 13:55:08 basically just transforming from the slow monotone to a faster hg repo Aug 10 13:55:41 more just playing at the moment Aug 10 13:55:57 to see what needs to be done to make them love eachother Aug 10 13:56:26 heh Aug 10 13:57:15 at this point it would olny be usable by people building not devs Aug 10 13:59:14 hmm i really dont remember how to write any python .. :( Aug 10 14:00:26 I'm not convinced anybody knows how to write python... :) Aug 10 14:01:09 thats a pretty acurate statement as well Aug 10 14:01:31 CosmicPenguin, you have hg installed? Aug 10 14:01:43 not right now Aug 10 14:01:44 but I Aug 10 14:01:48 've been thinking about it Aug 10 14:01:59 its a 15 second install when you do Aug 10 14:02:24 i might get you to try and do a pull Aug 10 14:02:44 the web part wont work until later Aug 10 14:03:09 Biggest question is - can I do it through a proxy? Aug 10 14:03:21 should be able to Aug 10 14:03:27 hg uses http or ssh Aug 10 14:03:28 Then I'm sold Aug 10 14:04:28 * JustinP emerges mercurial Aug 10 14:04:39 which version? 6b? Aug 10 14:04:45 yeah Aug 10 14:05:04 wow, 102K?? that's a small program... Aug 10 14:05:08 http://www.selenic.com/mercurial/README Aug 10 14:05:11 yup Aug 10 14:05:20 is a quick overview of how to use it Aug 10 14:07:10 emte: emerging it now - give me 10 or 15 minutes Aug 10 14:07:22 emte: did you want me to try a pull? Aug 10 14:07:32 its gonna take another 10-40 minutes for monotone to finish updating anyway Aug 10 14:07:52 i need to push the repo first Aug 10 14:07:55 I'll be ready when you are Aug 10 14:08:21 ok Aug 10 14:33:05 hmm Aug 10 14:33:36 i cant seem to push it atm, will have to wait until later i guess Aug 10 14:33:52 I'm set up here.... Aug 10 14:34:02 yeah, its an issue with ssh Aug 10 14:34:21 doesnt find hg on the remote system Aug 10 14:34:31 I'm so excited - I can finally get code without jumping through six relays Aug 10 14:34:38 lol Aug 10 14:35:37 hmm, maybe ssh doesnt recognise .bash_profile ... Aug 10 14:36:27 i wonder if i can pull it with my ip ... lets find out which ports my isp doenst block Aug 10 14:38:45 hmm Aug 10 14:38:50 that might be working ... Aug 10 14:41:03 good thing this is going to a 100mbit server and not this machine Aug 10 14:44:30 hmm Aug 10 14:51:27 stupid isp Aug 10 14:53:37 * CosmicPenguin wonders what it would take to bribe pb_ to update gcc-cross-sdk to 3.4.4 Aug 10 14:54:05 I want http://www.projectblackdog.com/site/index.html in OE Aug 10 14:54:16 would this mean a simple compile or updating patches and such? Aug 10 14:54:57 I meant that for CosmicPenguin, BTW Aug 10 14:55:28 its a webserver .. Aug 10 14:55:42 yes, I saw that Aug 10 14:56:05 i cant really think of any spectacular thing for a webserver to do Aug 10 14:56:17 emte: It's and Xserver Aug 10 14:56:56 how about we make it some appendages and it makes itself walk? Aug 10 14:57:05 JustinP: its not that simple, actually - if it was, I would be done by now Aug 10 14:57:17 ok, just making sure Aug 10 14:57:51 hg clone http://64.180.41.158/openembedded Aug 10 14:58:01 if you can run that command you can have it but ... Aug 10 14:58:09 i doubt you will get through ... Aug 10 14:58:22 the other server might be fixed later so i can push Aug 10 14:58:30 i cant pull off my machine :( Aug 10 14:58:45 isp blocks too many ports Aug 10 14:59:16 bbiab i need to run to the bank Aug 10 15:02:07 * JustinP putters away happily on my *cable model* Aug 10 15:02:41 honestly I don't see why peopel bash it so much. I have had very very few speed/connectivity problems in the 5+ years I've had a cable modem and I've *never* had ports blocked Aug 10 15:03:00 JustinP: Guess it depends on your cable company. Aug 10 15:03:03 but maybe I'm just in the right areas.... Aug 10 15:03:07 I've probably just had some of the really bad ones Aug 10 15:03:11 always been Comcast for me Aug 10 15:03:15 week long outages Aug 10 15:03:21 ick Aug 10 15:03:22 isps's changing their domains yearly Aug 10 15:03:32 ports being blocked for months at a time Aug 10 15:03:38 I think I may have had 2 1-day-long outages but that's pretty much it Aug 10 15:03:59 The one I'm thinking of lasted for a week before the ISP ever admitted it wasnt a local problem Aug 10 15:04:00 the only big outtages here comes from typos in IOS Aug 10 15:04:07 * JustinP waits for my poor slow server to build.... Aug 10 15:04:32 the funniest outtage was when the admin made a typo when unblocking ports for downloading ringtones :) Aug 10 15:04:34 "oh yeah, everyone in your area is down. Guess we were wrong" Aug 10 15:04:37 I had DNS servers being flaky for a while the other night.... Aug 10 15:05:04 well, I killed the umount -v in /etc/pcmcia/shared for now...and my Z is working again Aug 10 15:05:29 oh and dns being about 6 months out of date Aug 10 15:05:36 bleh Aug 10 15:18:39 what does IPKG_ARCHS do? Aug 10 15:19:41 later guys Aug 10 15:19:49 Just want to add a tag to the ipkg packages (like for example less-xxx--) Aug 10 15:20:16 well my arch is automatically added to mine... Aug 10 15:28:30 no.... Aug 10 15:28:33 No..... Aug 10 15:28:36 NO!!!!! Aug 10 15:28:51 I think I just heard my spitz's hard drive crash.... Aug 10 15:29:01 ouch Aug 10 15:29:22 screen went gray and I heard that little "crunch" Aug 10 15:29:32 battery out, in, power, nothing Aug 10 15:29:38 hmmm Aug 10 15:29:39 bad Aug 10 15:30:03 reboot with D+B, init 6, load up OZ kernel, gets to starting the HD (cardmgr), I see the partitions, then gray screen Aug 10 15:30:22 it *could* be the flash.... Aug 10 15:30:32 I'll try reflashing later I guess (have to run now) Aug 10 15:30:42 damn it....why is this happening to me? Aug 10 15:30:51 I hope I'm still under warranty with dynamism.... Aug 10 15:43:35 nah i am on dsl Aug 10 15:43:50 only "business" accounts are supposed to run servers Aug 10 15:44:11 and with all the p2p stuff they are locking down ports Aug 10 15:45:38 that and the trojan stuff Aug 10 15:46:00 helps keep systems from infecting eachother Aug 10 15:46:15 infecting/attacking Aug 10 16:02:10 Where can i read about the different local.conf / distro.conf options? Aug 10 16:02:37 the wiki has a few Aug 10 16:03:03 and http://ewi546.ewi.utwente.nl/tmp/d/keys.html Aug 10 16:04:09 Thx, Looking to change they way my packets are called. I want them to be called Aug 10 16:05:10 that sounds like you might be pushing filename max Aug 10 16:05:59 Ah, didnt consider that Aug 10 16:06:19 openzaurus-pxa-2.4.18-rmk7-pxa3-embedix20031107-2.4.18-pxa-p3 Aug 10 16:06:29 would be something silly like that Aug 10 16:07:18 since the filename itself was: openzaurus-pxa-2.4.18-rmk7-pxa3-embedix2003110 Aug 10 16:07:27 lost the 7 Aug 10 16:07:59 I would just like to have the distro release name after the arch so i can better keep track of what package belongs to which release Aug 10 16:08:26 Its multiple archs with multiple release names so hard to keep track off Aug 10 16:18:51 yup Aug 10 16:19:03 you "could" fix ipkg to read headers Aug 10 16:28:56 ipkg is definatly an area that needs work Aug 10 16:29:23 it does it's job ... barley Aug 10 16:41:45 03nail 07org.oe.nslu2-linux * r936c8a8f... 10/packages/meta/openslug-packages.bb: Move groff and icecast to broken packages Aug 10 18:29:28 hello all is anyone here using matt's rom on there 5600?? Aug 10 18:35:56 looks like my Spitz is toally bricked now...I can only get into the service menu Aug 10 18:52:47 or maybe it's not....it just looks like the battery was dead....damn it, OZ is causing my zaurus to not charge while on... Aug 10 19:29:46 join #synce Aug 10 20:22:52 i must say ... being able to navigate the repo is pretty mice Aug 10 20:23:30 hope my admin replies soon Aug 10 20:30:38 navigate? Is mercurial better that monotone in this regard somehow? Aug 10 20:32:09 here i'll show you Aug 10 20:32:26 http://www.selenic.com/hg/ Aug 10 20:32:32 taht is the hg repo Aug 10 20:33:05 Manifest is probably what you want to view Aug 10 20:33:19 hi emte Aug 10 20:33:26 hey how goes it? Aug 10 20:33:55 not bad trying to be ready for the conference talk in 3 weeks Aug 10 20:34:05 good good Aug 10 20:34:27 i am just making a pain of myself and trying to get ahold of my admin Aug 10 20:34:31 and I'm trying to get my stuff ready for when I will leave the 24 Aug 10 20:34:59 you almost ready? Aug 10 20:35:08 emte: 40% Aug 10 20:35:22 if you finish tomorrow you can have coffee for the next 13 days :P Aug 10 20:36:14 emte: I know what to say but it's the how and the format that annoy me Aug 10 20:38:22 isnt that why you use a copywriter? Aug 10 20:38:35 or a technical writer Aug 10 20:39:13 so JustinP how was the navigation? Aug 10 20:44:05 emte: just now looking Aug 10 20:45:41 I suppose it's nice to have file-based viewing but viewmtn has the revision graphs... Aug 10 20:45:50 would be nice to have file-based revision graphs, though Aug 10 20:47:11 click on the other tabs Aug 10 20:48:40 its only a simple cgi/py in any respect Aug 10 20:51:04 bbl Aug 10 23:13:06 good morning! Aug 10 23:56:48 morning all Aug 10 23:58:38 hi RP **** ENDING LOGGING AT Wed Aug 10 23:59:56 2005