**** BEGIN LOGGING AT Sat Oct 08 02:59:56 2005 Oct 08 03:05:44 http://pastebin.com/386948 < whats wrong? Oct 08 03:16:20 <_guillermo> lucasvo: did you fix your gpe-image problem? Oct 08 03:55:13 _guillermo: no Oct 08 03:55:41 <_guillermo> lucasvo: I did it, just delete all your all temp files, wherever you have them Oct 08 03:55:50 <_guillermo> and restart bitbaking Oct 08 03:55:52 <_guillermo> it worked Oct 08 03:57:52 ok Oct 08 03:57:57 I'll do the same Oct 08 03:58:03 _guillermo: are you done with it? Oct 08 03:58:11 have the gpe image? Oct 08 03:58:15 <_guillermo> yeah Oct 08 04:00:21 _guillermo: is it working? Oct 08 04:00:33 <_guillermo> didn't try yet Oct 08 04:00:40 too bad Oct 08 04:00:47 <_guillermo> I don't have my cf card now Oct 08 04:00:52 <_guillermo> so I can't flash my akita Oct 08 04:00:56 _guillermo: on what machine did you comile it? Oct 08 04:01:06 rma, ghz? Oct 08 04:01:28 <_guillermo> xeon 3.0 ghz Oct 08 04:01:32 <_guillermo> remotely Oct 08 04:01:39 <_guillermo> it's a michine in the uni just for that Oct 08 04:01:49 <_guillermo> really fast Oct 08 04:01:56 col Oct 08 04:02:12 _guillermo: can you compile one for me ? :D Oct 08 04:02:20 <_guillermo> sure Oct 08 04:02:24 * lucasvo is still in school... Oct 08 04:02:29 _guillermo: really? Oct 08 04:02:30 <_guillermo> but I need your local.conf Oct 08 04:02:46 <_guillermo> or not Oct 08 04:02:54 <_guillermo> jst tell me machine and distro Oct 08 04:04:45 http://wservices.ch/~lucas/local.conf Oct 08 04:04:50 bitbake gpe-image Oct 08 04:04:56 thanks a lot! Oct 08 04:07:40 <_guillermo> it will take some time Oct 08 04:07:44 <_guillermo> even in a fast machine Oct 08 04:07:48 <_guillermo> ok? Oct 08 04:07:52 _guillermo: ok Oct 08 04:08:02 _guillermo: how long did it take for you? Oct 08 04:08:13 <_guillermo> I don't remember Oct 08 04:08:29 ok, thanks a lot Oct 08 04:08:30 <_guillermo> it was yesterday and I didnt check the time Oct 08 04:08:34 <_guillermo> but no so log Oct 08 04:18:19 <_guillermo> I got this Oct 08 04:18:21 <_guillermo> ERROR: Unable to parse conf/bitbake.conf (conf/distro/familiar-0.8.3.conf:7: unparsed line: '"${@bb.fatal('This file is unmaintained in the org.oe.dev branch, use the org.openembedded.oz354fam083 branch instead. You can also remove this line, but don't complain if something breaks')}"') Oct 08 04:18:36 <_guillermo> so I guess I have to pull a different brach Oct 08 04:19:34 ehm I have the familiar... Oct 08 04:19:41 not the dev Oct 08 04:20:27 <_guillermo> dev is not a distro, but a branch of the oe development tree Oct 08 04:20:47 I mean I use the familiar branch... Oct 08 04:20:52 and not dev branch Oct 08 04:21:17 can you just remove that line? Oct 08 04:21:38 <_guillermo> but the right way would be getting the other brach Oct 08 04:21:45 <_guillermo> would'nt it? Oct 08 04:21:49 which one? Oct 08 04:21:59 <_guillermo> org.openembedded.oz354fam083 Oct 08 04:22:03 aha Oct 08 04:22:07 you have dev? Oct 08 04:22:11 <_guillermo> yes Oct 08 04:22:11 yes I took this one Oct 08 04:22:26 <_guillermo> I get it Oct 08 04:22:28 <_guillermo> no problem Oct 08 04:22:31 <_guillermo> give 1 munute Oct 08 04:22:45 ok Oct 08 04:23:03 but it takes quite long to pull the fam083 branch... Oct 08 04:23:22 <_guillermo> I know Oct 08 04:23:25 <_guillermo> I have time Oct 08 04:23:26 <_guillermo> do you? Oct 08 04:23:41 yes Oct 08 04:55:14 03rpurdie 07org.oe.dev * rf70bd0ba... 10/: linux-oz-2.6: Correct kernel size error message Oct 08 04:55:19 03rpurdie 07org.oe.dev * re0152948... 10/: linux-oz-2.6: Update kernels after ipaq-pxa-2.6 -> ipaq-pxa270 machine name change Oct 08 04:55:23 03rpurdie 07org.oe.dev * r6839f827... 10/: linux-oz-2.6: Add joint defconfig handling for cxx00 models Oct 08 04:55:36 _guillermo: already started compiling/ Oct 08 04:57:16 <_guillermo> not yet Oct 08 04:57:28 <_guillermo> I got the sources but I get errors from mu local.conf Oct 08 04:57:29 ok Oct 08 04:57:41 yours? have you adjusted it? Oct 08 04:57:41 <_guillermo> it's like if it was trying to use dev branch anyway Oct 08 04:58:04 <_guillermo> yes Oct 08 04:58:28 <_guillermo> I don't know if it kept something in cache or something Oct 08 04:58:48 bbpath? Oct 08 04:59:47 <_guillermo> working now Oct 08 04:59:55 cool Oct 08 04:59:56 thanks Oct 08 05:00:05 <_guillermo> i'll keep you updated Oct 08 05:00:28 thanks Oct 08 05:00:40 <_guillermo> no problem Oct 08 05:00:48 _guillermo: are you doing it over ssh? at which university? Oct 08 05:02:26 <[g2]> RP what did the machine name change to ? Oct 08 05:02:56 <[g2]> ipaq-pxx270 ? Oct 08 05:03:29 there is ipaq-pxA270 Oct 08 05:03:51 <[g2]> heh... my bad I meant pxa-270 :) Oct 08 05:21:29 [g2]: its changed from ipaq-pxa-2.6 to ipaq-pxa270. This one affects the hx2750 though Oct 08 05:21:35 s/one/only/ Oct 08 05:36:23 _guillermo: any errors? Oct 08 05:37:04 <_guillermo> not yet Oct 08 05:37:13 <_guillermo> right now is compiling kernel Oct 08 05:38:46 <_guillermo> kernel 2.6 btw Oct 08 05:43:11 <[g2]> RP so the hx2750 and hx4700 have PXA270s ? Oct 08 05:51:32 <_guillermo> lucasvo: it's packaging everything now Oct 08 05:51:43 <_guillermo> lucasvo: how do I sent it to you Oct 08 05:51:48 <_guillermo> dcc? Oct 08 05:52:19 <_guillermo> ups error Oct 08 05:52:56 <_guillermo> error with orinoco-modules Oct 08 06:20:27 _guillermo:oh no Oct 08 06:22:36 _guillermo: what should we do`? Oct 08 06:22:56 _guillermo: can you upload it over webdav? Oct 08 08:48:08 I get errors compiling xfce-image: /home/colbedded/stuff/tmp/cross/lib/gcc/arm-linux/3.4.4/../../../../arm-linux/bin/ld: cannot find -ldbh Oct 08 08:48:11 any help? Oct 08 09:02:34 I get cvs error when creating e-image Oct 08 09:02:42 what should I do first? Oct 08 09:12:04 guillermo: the first one looks like a lib is missing from staging - either it hasn't been placed there or is't not in the DEPENDS Oct 08 09:12:29 guillermo: I don't know about the cvs error, I've not tried to build e-image in a while Oct 08 09:12:51 too bad Oct 08 09:13:33 how to fix the first error? Oct 08 09:16:20 find out what the library is; see if it has been built; if it has see why it wasn't added to staging in do_stage; if it doesn't exist, add it to the DEPENDS Oct 08 09:19:42 but it doesn't say anything about wich library is trying to use Oct 08 09:19:53 -ldbh Oct 08 09:20:27 [g2]: And spitz, akita and borzoi Oct 08 09:20:52 ok Oct 08 09:30:34 what's wrong with akita and 2.6? Oct 08 09:31:22 when I try to get a kernel it says: FATAL: No default configuration for akita available. Oct 08 09:31:26 can I use spitz? Oct 08 09:34:10 in MACHINE: ? Oct 08 09:43:22 lardman|busy: dbh libs are there, but I keep getting the same error Oct 08 09:43:25 any tip? Oct 08 09:46:25 they are in staging? Oct 08 09:47:04 Look at the command line and make sure that the lib dir (-L) is specified okay to point to the right place Oct 08 09:47:35 the command to gcc I'm talking about that is Oct 08 09:47:47 good luck anyway, I'm off home Oct 08 09:47:50 night all Oct 08 10:15:40 anyone using 2.6 kernel with akita or spitz? Oct 08 10:56:17 _guillermo: I use a spitz kernel. You're having problems with orinoco? Oct 08 10:57:07 hey people, in hamburg now Oct 08 10:57:28 hi mithro - you're getting about a bit :) Oct 08 11:03:35 RP: well it's rather expensive to fly to europe Oct 08 11:03:35 so I might as well travel why i'm here Oct 08 11:09:58 <_guillermo> RP: I could not compile 2.6 for akita because it said akita was not a valid machine Oct 08 11:12:36 _guillermo: akita is a valid machine see conf/machine/akita.conf Oct 08 11:12:48 <_guillermo> I konw Oct 08 11:12:48 akita has been missing a defconfig for 2.6 Oct 08 11:12:57 <_guillermo> that's what I mean Oct 08 11:13:04 If you pull some changes I made earlier today, it should now work Oct 08 11:13:10 <_guillermo> I get a missing defconfig Oct 08 11:13:22 <_guillermo> I'm gonna try Oct 08 11:13:32 I fixed that this morning Oct 08 11:13:54 * RP goes for food Oct 08 11:15:24 _guillermo: any progress or do you don't have time to fix it Oct 08 11:16:43 <_guillermo> lucasvo: sorry right now I'm overworked Oct 08 11:17:02 <_guillermo> but I'll give it some time when I have it Oct 08 11:18:13 np thanks Oct 08 12:05:57 hey all! Oct 08 12:06:22 I'm having trouble booting 2.6.12 using haret (though 2.6.11 works fine). Does haret not work with 2.6.12? Oct 08 12:06:41 <_guillermo> RP: this is what I get Oct 08 12:06:51 <_guillermo> I get this: Oct 08 12:07:00 <_guillermo> install: cannot stat `/home/colbedded/stuff/tmp/work/linux-openzaurus-2.6.14-rc1-r2/defconfig-akita': No such file or directory Oct 08 12:07:00 <_guillermo> | FATAL: No default configuration for akita available. Oct 08 12:07:43 RP: akita problems Oct 08 12:19:46 There was a peanut in new york, he was a salted. Oct 08 12:19:54 ah! ha ha ha. I akita you Oct 08 12:24:05 so anyways, i haven't been yet able to compile an openzaurus image from oe for spitz Oct 08 12:26:19 an image for spiz would work in an akita? Oct 08 12:28:50 guillermo_: No. You need to update your copy of openembedded to include the changes I made this morning Oct 08 12:29:12 RP: I just did it but no change at all Oct 08 12:29:25 the only thing I have to do is monotone update Oct 08 12:29:26 guillermo_: You need the .dev branch Oct 08 12:29:31 yes Oct 08 12:29:37 it's the one I'm using Oct 08 12:29:52 you need monotone pull, then monotone update Oct 08 12:30:09 amm Oct 08 12:30:11 sorry Oct 08 12:30:51 monotone: connecting to monotone.vanille.de Oct 08 12:30:51 monotone: network error: failed to connect: Connection refused Oct 08 12:31:04 try one of the other servers then Oct 08 12:31:08 is it down ? Oct 08 12:31:15 ok Oct 08 12:33:28 is any mirror much faster than the others? Oct 08 12:34:50 no Oct 08 12:35:57 thx Oct 08 12:35:58 :) Oct 08 12:36:00 what do I have to do after I have bitbaked the gpe-image? Oct 08 12:57:21 lucasvo: check in the familiar website Oct 08 12:57:46 it's the same process than if you install an official version image Oct 08 12:58:53 guillermo_: ok Oct 08 13:09:11 RP: FATAL: No default configuration for cxx00 available. Oct 08 13:09:47 guillermo_: What did you set MACHINE to? Oct 08 13:10:38 akita Oct 08 13:11:12 OE Build Configuration: Oct 08 13:11:16 BB_VERSION = "1.3.2.1" Oct 08 13:11:20 OE_REVISION = "6839f8277e61eb6fd4950f0a58e523fb367f1556" Oct 08 13:11:20 TARGET_ARCH = "arm" Oct 08 13:11:20 TARGET_OS = "linux" Oct 08 13:11:21 MACHINE = "akita" Oct 08 13:11:21 DISTRO = "openzaurus" Oct 08 13:11:21 TARGET_FPU = "soft" Oct 08 13:11:39 use pastebin for things like that in future - don't flood the channel Oct 08 13:12:29 excuse me Oct 08 13:13:23 where can I get info about pastebin and that kind of stuff? Oct 08 13:13:30 ~pastebin Oct 08 13:13:33 somebody said pastebin was a place to paste your stuff without flooding the channel - try http://pastebin.ca/ Oct 08 13:14:09 ok Oct 08 13:14:14 thx Oct 08 13:14:32 why do I get that weird error about cxx00 ? Oct 08 13:14:36 guillermo_: You need to clean the kernel package Oct 08 13:14:45 aps Oct 08 13:14:45 ok Oct 08 13:15:12 anyone having trouble building gcc? http://pastebin.ca/24963 Oct 08 13:20:16 cbrake: I'm still using 3.4.3... Oct 08 13:21:02 RP: where is a good place to set the GCC version? Oct 08 13:21:23 local.conf? Oct 08 13:21:52 RP: ok, thanks! Oct 08 13:26:12 hmm, gcc version is set to 3.4.4 in familiar-0.8.3.conf -- I wonder if it builds for anyone else? Oct 08 13:28:11 where exactly in local.conf Oct 08 13:28:22 cbrake, yes, I had trouble with 4.0.0 Oct 08 13:28:23 what if I don't specify any version (like I do now) ? Oct 08 13:28:34 and put the 3.4.4 thing from familiar into local.conf Oct 08 13:28:39 and built sucessfully Oct 08 13:29:28 oh wait, you're not having trouble with 4.0.0, nevermind Oct 08 13:29:44 MP0: what branch of OE are you using? Oct 08 13:30:08 guillermo_: you may get the latest or it might be set in your distro conf file. Oct 08 13:30:26 all right Oct 08 13:31:17 guillermo_: see familiar-0.8.3.conf for an example of how to set the gcc version Oct 08 13:34:54 ok Oct 08 13:34:58 thx Oct 08 13:36:14 gcc 3.4.3 seems to be going ... Oct 08 13:43:48 alright - I've been battling a 'segfault' problem with most of my compiled programs & I've found out the source of the problem -- libc-2.3.2.so & libpthread-0.10.so Oct 08 13:44:22 I was able to figure it out by finding an older image (about 3 weeks old) with one I just recently built Oct 08 13:44:42 using 'gdb' I found the segfault came from libc.so.0 Oct 08 13:45:16 Now for my question - How can I find out the differences between the two 'glibc' packages? Oct 08 13:45:40 I didn't personally alter anything with the glibc, and I've diff'd about everything I could think of :( Oct 08 13:45:56 Is there a changelog I could review for monotone or something? Oct 08 14:44:00 Anyone wanna help me port snes9x 1.43 to opie? I wrote an SDL backend for it, it works, the emulator is slow as heck. I know it's not my backend doing it. 1.39 is very fast Oct 08 14:44:15 The straces and profiles arn't making much sense to me :\ Oct 08 14:44:35 it shouldn't be much slower than 1.39 if anything Oct 08 18:32:42 evening Oct 08 18:54:50 JustinP: did koen actually mean the '*not*' in the email he sent to OE about my commit messages? Oct 08 19:07:39 I'll assume not. Posted explanatory sarcasm to handhelds ML. Oct 08 19:28:23 anyone try php5 with OE ? Oct 08 20:38:17 anyone know php compiling on OE well? I'm working with the included php-4.3.10 Oct 08 20:38:56 trying to enabled a configuration option --enable-experimental-zts, but the configure script now errors out with: ' configure: error: Your system seems to lack POSIX threads.' Oct 08 20:39:15 it compiles fine with this not on, but I need it in order to link PHP support with appweb Oct 08 20:39:23 has anyone built appweb with PHP support? Oct 08 23:24:04 dwildes, you trying to build an embedded webserver? Oct 08 23:25:00 btw dwildes depending on your chip you cant build with POSIX threads Oct 08 23:27:35 * emte goes back to mangling an OE setup-installer Oct 09 00:48:40 <_alex_3> good morning from DE :) Did anyone recently build bluez-utils? **** ENDING LOGGING AT Sun Oct 09 02:59:56 2005