**** BEGIN LOGGING AT Tue Nov 08 02:59:58 2005 Nov 08 03:00:03 Gooooood Morning! Nov 08 03:00:57 Is there a simple way to build a gpe-image for h3900 with 2.6 kernel ? Nov 08 03:02:38 hrw|work: Sadly, most are sitting in rmk's patch system :-( Nov 08 03:03:01 hi Dirk Nov 08 03:03:04 hi dirk Nov 08 03:03:14 hi RP, hrw|work Nov 08 03:03:37 hi zecke Nov 08 03:03:48 hi zecke Nov 08 03:05:42 RP: any comments from rmk about the Patch #3093/1 (SharpSL PCMCIA Updates)? Nov 08 03:05:56 do13: Not a thing :-/ Nov 08 03:06:23 RP: I put the tosa patch into his patch system Nov 08 03:07:16 marc__: in conf/machine/h3900.conf there is a param to select kernel 2.6 Nov 08 03:08:30 do13: The patches look good. As part of my new job I guess I should sign them off :) Nov 08 03:08:52 RP: :) Nov 08 03:08:53 RP: new job? Nov 08 03:09:02 can one congratulate to something? Nov 08 03:09:36 zecke: rmk has asked me to vet all the Sharp Zaurus patches as I know more about it than him Nov 08 03:09:41 I'm trying to substitute dropbear by openssh, and openssh is compiled, but not installed, or at least I don't see anything like /etc/init.d/sshd, is it INSTALLED in a non stardard place? Nov 08 03:09:53 koen: thanks Nov 08 03:09:53 RP: congrats Nov 08 03:09:55 ~lart nokia for dtl1 bt card Nov 08 03:09:55 * ibot drops a truckload of VAXen on nokia for dtl1 bt card Nov 08 03:10:22 I'm still not sure what happens when I want to submit a patch though... :) Nov 08 03:10:52 zecke: did shawn or lorn send you and abusive email yet? Nov 08 03:11:11 koen: not yet Nov 08 03:11:34 shawn called me a jihadi last time :) Nov 08 03:12:02 koen: well most of the time you could differentiate more ,) Nov 08 03:12:17 heh Nov 08 03:14:32 do13: Out of interest, why the pxa_gpio_mode calls in the irda transceiver function? Nov 08 03:15:51 RP: Sharp did this calls in 2.4. It makes sense to put the line low. Nov 08 03:16:37 do13: Was that just done on tosa or on the other models too? Nov 08 03:17:24 RP: can't remember. irc only tosa Nov 08 03:17:50 do13: Ok, perhaps that's why I've missed it. Nov 08 03:18:28 do13: As a tip for the future, I'd recommend linewrapping the text in the Notes section in the patch system. Nov 08 03:19:04 The system should really do that for you but until it does... Nov 08 03:19:41 RP: Thanks for the hint. I'll wait for rmks comment :) Nov 08 03:20:20 do13: I found out the hard way ;-) Nov 08 03:21:09 RP: pxa_gpio_mode is only tosa related in 2.4 Nov 08 03:22:19 do13: ok, thanks, I was just worried I'd missed something for the c7x0/cxx00's :) Nov 08 03:22:41 RP: how do I mount the sd canrd in my akita? is it /dev/mtdblock2 ? Nov 08 03:22:59 katossi: /dev/mmcblk0p1 Nov 08 03:24:14 katossi: It should be automounted unless you've repartitioned it Nov 08 03:25:03 it's not being automounted, I don't know if it's because is ext2 Nov 08 03:25:06 RP: hello, I am the guy looking for 2.6 kernels for testing on c3100... Nov 08 03:25:51 is anything wrong with the unzip form busybox? I can't unzip a simple .zip file (unsupported method compression 0 ) Nov 08 03:26:16 katossi: Yes, ext2 will mean you need to edit /etc/fstab to have it automount Nov 08 03:26:37 greentux: hi. are you after to build your own or just do testing? Nov 08 03:27:34 RP: just do extensible testing. Nov 08 03:27:55 RP: but in fstab the fs type is auto Nov 08 03:28:06 katossi: Then it should work :-/ Nov 08 03:29:05 greentux: This means someone needs to build you an image as I don't have a borzoi one handy at the moment. Give me an hour or two and I can probably have an opie image ready for testing Nov 08 03:29:59 not a gpe image? ;) Nov 08 03:30:09 * ade|desk does the happy uclibc dance Nov 08 03:30:25 rp: big thanks. perhaps in two weeks i have another developer, who so also some building stuff, but for starting wit 2.6 & borzai it would be nice! Nov 08 03:30:33 ultra castrated dance? Nov 08 03:31:45 small in seat jig Nov 08 03:31:54 koen: did you see http://vizzzion.org/stuff/xgl_wanking.avi yet? Nov 08 03:33:09 zecke: a long time ago Nov 08 03:33:37 I saw the demo a long time before the aKademy people did Nov 08 03:34:54 zecke: http://www.gnome.org/~seth/blog/xshots Nov 08 03:35:30 koen: well these are different Nov 08 03:35:53 that's the one with all the zooming, right? Nov 08 03:36:48 I had Xglx working a while ago, but Ubuntu decided to break fglrx Nov 08 03:40:17 heh.. GL rendering in X11.. something not for my machines Nov 08 03:40:42 thanks to Daniel Stone not for me either Nov 08 03:41:15 isnt there something wrong about X on GL on X? Nov 08 03:41:36 my machines hardware is not capable to do good GL anyway.. matrox g400/450 is not GL monster Nov 08 03:41:55 it's great for 2d accel and tv out Nov 08 03:42:07 * XorA uses a 450 purely of tvout Nov 08 03:42:12 the g400 was the best designed card I ever owned Nov 08 03:44:58 tvout I would have to connect to tv tuner - but this will give me a loop as my g400@home is single head ;) Nov 08 03:46:09 7.5EUR for g400 DH Nov 08 03:54:02 we should use DirectFB anyway Nov 08 04:21:19 koen: and I guess shawn just want to sell apps Nov 08 04:21:28 koen: minimize work, maximize profit ;) Nov 08 04:22:40 maximize FUD Nov 08 04:23:09 you know that as a true patriot you can't code for a jihadi platform Nov 08 04:23:23 bush will lock you into guantanamo bay for doing that Nov 08 04:27:04 if he can remember where it is... Nov 08 04:28:44 http://lists.gnu.org/archive/html/monotone-devel/2005-11/msg00030.html is pretty cute Nov 08 04:34:13 greentux: http://www.rpsys.net/openzaurus/temp/borzoi-3.5.4ish/ Nov 08 04:34:51 greentux: Keep in mind borzoi is untested and this is not from the release branch Nov 08 04:38:52 RP: can I put that URL in 3.5.4-rc post on oz.org? some users asks for 2.6 to test Nov 08 04:40:03 hrw|work: ok, But stress it is not from the 3,5,4 release branch and is a total unknown quantity on borzoi Nov 08 04:40:25 hrw|work: Its actually a spitz image but there's no reason it shouldn't work... Nov 08 04:40:47 RP: so I will make a new post Nov 08 04:40:51 hrw|work: don't put it in the RC thread, but a seperate one Nov 08 04:40:57 yep Nov 08 04:41:39 and some users asked for a gpe images as well Nov 08 04:41:54 koen: Did you add the gpe image fix? Nov 08 04:42:10 no, didn't have time to sort that out yet Nov 08 04:42:25 koen: Sort it out and only then will I build some ;-) Nov 08 04:42:38 :) Nov 08 04:44:52 RP: could you provide kernel modules packages for that image? Nov 08 04:45:38 hrw|work: ok - will be added to a modules directory shortly Nov 08 04:45:43 need to stage them Nov 08 04:45:58 ok thx Nov 08 04:46:35 http://openzaurus.org/wordpress/2005/11/08/borzoi-3100-testing-image-with-26-kernel/ Nov 08 04:47:17 feel free to edit it needed Nov 08 04:53:21 is it possible to use gcc4 to build a gpe-image for example ? I have some errors... Nov 08 05:00:30 mallum: nice to see o-hand.com growing ;) Nov 08 05:01:49 hey zecke Nov 08 05:01:55 it is ? how come :) ? Nov 08 05:02:25 * zecke just read planet.gnome.org Nov 08 05:02:48 oh I see ;) Nov 08 05:03:07 gah Nov 08 05:03:12 ~stab jffs2 Nov 08 05:04:38 koen: have you leanrt c yet ? Nov 08 05:04:59 no, but my 1337 m4tl4b skills have improved Nov 08 05:05:17 rm -fr matlab Nov 08 05:07:19 RP: patch is in, but untested thanks to jffs2 blowing up Nov 08 05:08:27 koen: ok, thanks Nov 08 05:08:47 it's conditional anyway, so harmless for most devices Nov 08 05:08:49 rp: thanks, will test now. Nov 08 05:09:10 03koen 07org.oe.dev * rbc093cfe... 10/: Nov 08 05:09:10 gpe-sessionscripts 0.66: add conditional patch for devices with a high dpi Nov 08 05:09:10 * sets fonts to fontsize 5 Nov 08 05:10:00 Oh rock. I'll have to install that. :) Nov 08 05:10:36 Noodles: it only works for new users Nov 08 05:10:38 Who are the GPE gurus btw? I was noticing some nasty problems with things not being sized correctly (eg account setup in GAIM). Nov 08 05:11:03 Plus, GPE on Spitz things it's in portrait mode rather than landscape. Nov 08 05:11:14 for the account setup: rm DL_DIR/*patch* and rebuild Nov 08 05:12:29 * XorA coughs, mozilla thunderbird takes 48M when installed Nov 08 05:12:37 only? Nov 08 05:12:57 hrw|work: on a Z, thats crazy, someone slap me with a wet kipper Nov 08 05:13:11 ~fishslap XorA Nov 08 05:14:15 koen: Hmmm? Which account setup? Nov 08 05:14:27 well thats the mystery of the missing / space anyway Nov 08 05:14:28 gaims Nov 08 05:15:08 Oh, has it been fixed then? Nov 08 05:15:15 I shall try later. Nov 08 05:16:00 it was fixed a while ago, but OE doesn't refresh the patch Nov 08 05:16:46 OE doesn't know how to do that hence all my zaurus patches having release numbers Nov 08 05:17:12 indeed Nov 08 05:19:10 mmm... my modem/router rebooted... lucky a source package was not being retrieved. Is there any option in bitbake to prevent everything from failing in such a case ? Nov 08 05:19:55 bitbake --no-reboot-modem-please ? Nov 08 05:20:06 ^^ Nov 08 05:20:43 once downloaded source tarballs are kept in sources/ , Nov 08 05:21:01 magnet: not in sources/ but in DL_DIR Nov 08 05:21:01 they should not be downloaded again, unless you cleaned that dir. Nov 08 05:21:12 it uses wget -c, so everything should be safe Nov 08 05:21:21 ops Nov 08 05:22:21 zecke: could you send a mail to oe@ explaining the md5sum thingie? Nov 08 05:33:35 magnet i know that about sources being kept. But it already happened to me, building everything from scratch. I launched bitbake in the morning, before i went to my job. When i came back, nothing had been done because wget had failed finding the sources (no net connection for 2 or 3 minutes.) Nov 08 05:34:14 bitbake -k -c fetch Nov 08 05:34:44 oh I misunderstood you, you can fetch all file before starting to compile. Nov 08 05:34:56 err ok koen is faster :) Nov 08 05:38:18 and if you fetch faster then build then you can run both in parallel Nov 08 05:41:24 rp: no initrd.bin, thats right? Nov 08 05:41:40 greentux: right Nov 08 05:43:28 koen: gpe-image was stripped a bit after 3.5.4-rc? Nov 08 05:43:53 I think it was Nov 08 05:51:15 doesnt recognice the cf now... :) will see Nov 08 05:51:56 forgot AC :) Nov 08 05:52:12 greentux: which cf card type? Nov 08 05:52:38 greentux: and 'does not recognize' mean 'no pccardctl ident' or 'no driver loaded'? Nov 08 05:53:31 doesnt flash without AC, but i cant read japanese ... Nov 08 05:53:36 ok next try Nov 08 05:54:41 kernel panic: no init found Nov 08 05:55:14 how to scroll back the kernel log? Nov 08 05:56:55 greentux: Did it put files onto the microdrive? Nov 08 05:57:06 * RP wonders if the updater.sh is working Nov 08 05:57:09 it flashes the kernel, reboots and stops Nov 08 05:57:41 doesnt see any activities on hdd Nov 08 05:58:15 retry... Nov 08 05:58:18 greentux: The updater.sh looks wrong - let me try and write a better one Nov 08 05:58:32 greentux: c3100 does have a microdrive, doesn't it? Nov 08 05:58:50 updater writes zImage.bin, thats all, reboots and stops Nov 08 05:59:26 4GB CFA Disk drive Nov 08 06:00:07 what about the updater from 3.5.4RC1->3100? Nov 08 06:00:47 greentux: Won't work. Try the one I've just added to the directory Nov 08 06:01:05 greentux: This one should install the image onto the first partition on the microdrive Nov 08 06:01:22 http://www.rpsys.net/openzaurus/temp/borzoi-3.5.4ish/updater.sh Nov 08 06:02:03 ok, mom Nov 08 06:04:17 now formatting, Nov 08 06:04:25 now formatting Nov 08 06:04:28 xf not found Nov 08 06:04:29 error Nov 08 06:04:32 reboot... Nov 08 06:04:37 no init found Nov 08 06:04:49 panic :( Nov 08 06:05:09 greentux: show us 'cardctl ident' output from borzoi - maybe 2.6 does not have that cf card in list of known ones Nov 08 06:05:41 so i have reflash 3.5.4rc1... mom Nov 08 06:07:31 kj Nov 08 06:08:25 RP: want udev 074? Nov 08 06:08:36 ok, 3.5.4rc1 updater writes now his image to hdd... Nov 08 06:08:42 03rwhitby 07org.oe.dev * rc1e11e88... 10/: ludeos: Added nas100d/ludeos distribution, including nas100d-kernel. Nov 08 06:08:47 03rwhitby 07org.oe.dev * r2f275ba2... 10/: nas100d-kernel: Fixed nas100d-kernel.inc Nov 08 06:10:09 greentux: I don't like the sound of the error "xf not found". Was that the exact and only error? Nov 08 06:11:09 hrw|work: I think it just fixes bugs we haven't seen yet. You can add it to OE if it works Nov 08 06:11:24 yes... i looks like that it formats 2 of the 3 partitions of hdd... but the 3. hat errors... Nov 08 06:11:57 greentux: Did you add gnu-tar to the CF card? Nov 08 06:12:13 yes gnu-tar moved to tools.tar Nov 08 06:12:27 no, call it gnu-tar Nov 08 06:12:42 we're not pdxrom Nov 08 06:13:14 3.5.4rc1 works with tools.tar ... just installed :) Nov 08 06:13:24 ok, cardctl ident interested any longer? Nov 08 06:13:33 no, run it just to be sure Nov 08 06:13:46 as you have the image installed... Nov 08 06:14:03 hitachi microdrive 0x0319 0x000 4 (fixed disk) Nov 08 06:14:44 hitachi.. so it should work Nov 08 06:14:54 greentux: ok, that matches spitz, thanks Nov 08 06:15:12 ok, reinstall your 2.6... Nov 08 06:15:17 What's the difference between the 3000 and 3100? Nov 08 06:15:30 Try again with no initrd.bin, and gnu-tar named gnu-tar :) Nov 08 06:15:40 Noodles: Different flash size and type Nov 08 06:15:55 on the run... Nov 08 06:16:16 no formatting Nov 08 06:16:20 sorry Nov 08 06:16:23 now formmating Nov 08 06:16:26 now extracting Nov 08 06:16:57 and a lot "could not create symlinks" Nov 08 06:17:57 i think for all files... Nov 08 06:18:20 That doesn't sound good... Nov 08 06:18:23 no such file or directory Nov 08 06:18:27 ok reboot and... Nov 08 06:18:35 no init found :) Nov 08 06:18:59 the first time extracting there were no errors. after 10 or 15 seconds the errors began Nov 08 06:19:16 did you copy the gnutar binary too? Nov 08 06:19:33 greentux: We need to find out why you see those errors... Nov 08 06:20:05 http://pastebin.com/421660 - udev 074 attempt Nov 08 06:20:39 hdimage1.tgz updater.sh zImage.bin gnu-tar Nov 08 06:20:52 http://pastebin.com/421660 - udev 074 attempt Nov 08 06:22:12 greentux: What's your shell script like? Nov 08 06:22:22 updater writes HDD RO filesystem... means RO = read only? Nov 08 06:22:53 greentux: http://www.rpsys.net/openzaurus/temp/borzoi-3.5.4ish/updater.sh-raw is the raw updater.sh script Nov 08 06:23:01 http://www.embedded-kernel-track.org/2004/mallum/img1.html <- I always knew that Nov 08 06:23:09 http://www.rpsys.net/openzaurus/temp/borzoi-3.5.4ish/updater.sh-test is a version which will drop you to a shell Nov 08 06:23:59 greentux: Use the version to drop to a shell and see why it has problems extracting the rootfilesystem Nov 08 06:24:05 zecke: so when KDE on qt/e? Nov 08 06:24:07 ok Nov 08 06:24:13 greentux: You can see the commands it runs from the raw script Nov 08 06:24:30 greentux: Check things like the drive is mounted where it thinks it should be etc. Nov 08 06:24:44 zecke: hehe, my true beliefs there in black and white ;) Nov 08 06:26:02 hrw|work: today? ./configure --with-qtopia Nov 08 06:27:00 sorry, the script does the same... Nov 08 06:27:13 zecke: and it works? nice Nov 08 06:27:57 greentux: updater.sh-test should drop to a shell... Nov 08 06:28:53 doesnt.md5sum ends in dde34e Nov 08 06:29:20 ok, or do you mean after extracting? Nov 08 06:29:22 fsck udev074 - I go lunch Nov 08 06:29:50 greentux: yes Nov 08 06:30:08 it will try to extract, then drop to a shell Nov 08 06:30:19 03rwhitby 07org.oe.dev * r8663bff0... 10/: nas100d-kernel: Modified nas100d-kernel.inc to look in nas100d-kernel instead of nslu2-kernel. Nov 08 06:30:33 no after extracting errors it reboots Nov 08 06:31:04 hrw|work: no, some people believe it works... Nov 08 06:31:22 hrw|work: Lets just wait for 075 ;-) Nov 08 06:32:31 greentux: I suggest you take the raw updater.sh, edit it and then encode it and try and get to a shell Nov 08 06:32:56 how to encode? Nov 08 06:34:06 your /bin/sh -i stands after "success", but i have the error state Nov 08 06:36:07 greentux: ah yes, sorry - try the one I've just uploaded Nov 08 06:36:28 encoding is done as per enc.c on: http://externe.net/zaurus/faq/index.php/TBVBootSequence Nov 08 06:39:59 and rebooting again ... Nov 08 06:40:26 what is sharprom-compatible.conf in distro ? is it useable ? Nov 08 06:40:38 any doc about it ? Nov 08 06:42:45 can you go to shell direct after "now extracting"? Nov 08 06:54:35 ok, enc works now... Nov 08 06:56:27 greentux: or try reboot with D+B hold - on c7x0 it gives emergency 2.4 shell ;) Nov 08 06:56:52 it seems all ok on the /hdd1 Nov 08 06:57:49 any advantage to NOT write the image in flash (like initrd.bin does)? Nov 08 06:58:46 greentux: why using flash when you have uDrive available? Nov 08 06:59:45 ok, thought that teh usual way (i know only 3.5.4rc1 stuff :) Nov 08 07:01:13 gzip -dc works... Nov 08 07:03:35 ok... give me please md5sum of hdimage1.gz... seems unreadable Nov 08 07:04:17 greentux: b3814f3b1ae657f38f1189b7c6708b2c Nov 08 07:06:56 ok is right. Nov 08 07:08:41 RP: could you also put md5sums in directory? Nov 08 07:09:46 hrw|work: done Nov 08 07:10:09 now gzip|tar check... Nov 08 07:10:49 greentux: You need to use the gnu-tar, not the one on the filesystem Nov 08 07:10:57 slow output :) Nov 08 07:11:13 yes gzip -dc|./gnu-tar tf - (in /mnt/cf) Nov 08 07:11:23 works fine... Nov 08 07:12:40 check that /hdd1/sbin/init exists btw - if it does, the kernel should find it Nov 08 07:12:51 is will be a symlink Nov 08 07:13:42 ok now "xf" instead of "tf" and a -C /hdd1 Nov 08 07:13:58 extracting to /hdd1 is right i think... Nov 08 07:15:32 but same error. could not create directory and could not create file errors en masse Nov 08 07:15:47 The openzaurus project is currently over quota on Nov 08 07:15:47 the project shell server. Quotas for projects are set to 100 MB and the Nov 08 07:15:48 project is currently using 2049 MB. Nov 08 07:16:02 and we have to go <100MB till 2005-11-15 Nov 08 07:16:14 (letter from sf.net admins) Nov 08 07:16:32 ok... found Nov 08 07:16:36 btw. nice amount we use... Nov 08 07:16:49 hrw|work: ouch. How are we going to manage that? Nov 08 07:17:17 RP: no idea here Nov 08 07:17:52 I could offer storage for that amount of data but not the bandwidth :-/ Nov 08 07:18:23 ok /dev/hdc1 is mounted to /hdd1 and has only 10 MB Nov 08 07:18:34 3.5.4-RC is 343M Nov 08 07:19:22 you could put it on hh.org or ewi546 Nov 08 07:19:30 greentux: So sharp changed the partitioning on borzoi - I guess that makes sense... Nov 08 07:19:31 thats from the flashinstall with 3.5.4-rc Nov 08 07:19:36 how much would cost another host for the entire project hrw|work ? Nov 08 07:19:43 alan|xchat: dont know Nov 08 07:20:21 greentux: Which microdrive partition looks suitable as the rootfs then? Nov 08 07:20:29 hrw|work: you could put it on hh.org or ewi546 Nov 08 07:21:40 mmmh /dev/hdc1 and /dev/hdc2 have 10MB each, /dev/hdc3 has 4 GB Nov 08 07:22:19 greentux: I think we're going to have to suggest borzoi users repartition then... Nov 08 07:22:22 koen|uni: hh.org -> The Happy Hearts Organization: Nov 08 07:22:22 Top-Quality Dating Services At Lower Prices! ^^ Nov 08 07:24:07 i can try, what would you suggest? Nov 08 07:24:32 koen|uni: cool. now I have to get mickeyl alive and discuss what to do. Nov 08 07:25:41 greentux: It works like a normal harddisk - you'll need to use a disk repartitioning tool to change their sizes and reformat them Nov 08 07:26:57 i do that now... /dev/hdc1 -> 1.5GB Linux, /dev/hdc2 -> 2.5GB fat32 Nov 08 07:28:12 ~kergoth Nov 08 07:28:15 next try on extracting... Nov 08 07:28:15 i guess kergoth is Chris Larson, an embedded linux guy currently at Astrocom Corporation (http://www.astrocorp.com/). Email at kergoth@handhelds.org or clarson@astrocorp.com. Core dev / architect on the BitBake, OZ, and OpenEmbedded projects. Maintainer of the tslib project. Nov 08 07:28:58 hrw|work: http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/ Nov 08 07:29:35 koen|uni: nice Nov 08 07:29:54 it's fetching stuff right now Nov 08 07:30:28 i can also organise a mirror at tu-dresden university Nov 08 07:31:38 reboots and find a initrd yeah! Nov 08 07:31:46 luzik told some time ago that ftp.task.gda.pl also can be a mirror Nov 08 07:32:18 hope all plays with that new partitioning Nov 08 07:32:42 guys, has anyone ever heard about this ? http://www.rasterman.com/files/eem.avi Nov 08 07:33:12 i have the sources here. anyluck anyone may add this to OE ? Nov 08 07:33:13 yes, and that's actually does nothing usefull Nov 08 07:33:20 we to have e17 in OE Nov 08 07:33:53 koen|uni: yeah, that is what i'm currently compiling. But my ! the gui is wonderful !! Nov 08 07:36:08 greentux: it boot from first uDrive partition? Nov 08 07:37:34 no sorry /dev/hda is now the harddisk / is /dev/hda1 Nov 08 07:37:53 cf is mounted as /dev/hdc1 on /media/cf Nov 08 07:38:18 greentux: As it should be ;-) Nov 08 07:38:31 greentux: Did you boot into opie? Nov 08 07:38:56 http://openzaurus.org/wordpress/2005/11/08/borzoi-3100-testing-image-with-26-kernel/ updated Nov 08 07:39:03 yes... i test something now. Nov 08 07:39:38 perhaps updater.sh can make a simple 50%/50% partitioning after a request? Nov 08 07:40:15 d-link wlan works fine ... Nov 08 07:40:34 greentux: dcf-660w? Nov 08 07:40:42 greentux: No, updater.sh shouldn't be doing that as at the moment it preserves data on the other partitions Nov 08 07:41:18 dcf 660 weua1 Nov 08 07:42:03 ok, how are the partitions on tne C3000 organised? Nov 08 07:44:08 greentux: 100MB, 400MB, 3.5GB Nov 08 07:44:20 as standard... Nov 08 07:44:55 then 100MB should also not enough! Nov 08 07:44:55 hrw|work: I updated the messaege to add a parition size (>100MB) Nov 08 07:45:06 somebody tested 3000? Nov 08 07:45:16 greentux: works fine here with the same image Nov 08 07:45:34 greentux: That image has ~50MB of files in... Nov 08 07:45:44 error 404 on http://www.oesources.org/source/current/e17.libs.edje.m4_cvs.sourceforge.net__20050926.tar.gz anyone has this file ? Nov 08 07:46:14 mmmh that cant be. i started with 100/100/3.8GB Nov 08 07:47:00 greentux: You said 10MB earlier Nov 08 07:47:22 oh sorry Nov 08 07:48:57 :) dont now if that is original. i tried some distris... Nov 08 07:50:21 cacko and 3.5.4 rc1... Nov 08 07:57:58 e17.libs.edje.m4_cvs.sourceforge.net__20050926.tar.gz is not on oesources.org at all... is there another rep for sources ? Nov 08 08:01:18 yes, upstream :) Nov 08 08:10:18 RP: borzoi has 128MB flash, right? Nov 08 08:10:50 koen|uni: yes Nov 08 08:11:21 so OZ could ship a jffs2 image to solve partitioning problems, right? Nov 08 08:11:32 could Nov 08 08:12:07 koen|uni: In theory Nov 08 08:12:17 some users could start panicking for writing to a ROM Nov 08 08:12:26 *cough* Nov 08 08:12:48 greentux: I'd be interested to know if you can read/write ok to /dev/mtdblock2 (it will be a jffs2 partition) Nov 08 08:24:23 how can i check the read/write? Nov 08 08:27:15 how to mount etc... Nov 08 08:27:30 greentux: mount /dev/mtdblock2 /somemountpoint -t jffs2 Nov 08 08:29:05 no such device Nov 08 08:29:17 ok... Nov 08 08:29:23 modprobe mtdchar? Nov 08 08:29:29 no the zaurus freezes :) moment reboot Nov 08 08:29:47 no, i takes a long time, now mounted Nov 08 08:30:21 koen|uni: I just built a gpe image. The login screen and window titles still suffer from font issues but it looks better than it did Nov 08 08:31:47 mount sais only 32 MB Nov 08 08:33:08 greentux: That sounds about right Nov 08 08:33:39 ok i have a meeting now... Nov 08 08:33:43 greentux: Does it have a valid filesystem? Nov 08 08:34:05 I guess if you've messed with other images it might not... Nov 08 08:34:15 03xora 07org.oe.dev * rc1a4fbc4... 10/: Nov 08 08:34:15 mplayer-atty-1.1.5 : Enable ALSA Nov 08 08:34:15 A small hack required to the configure file as it tries to run a program Nov 08 08:34:15 to determine which version of alsa is installed. Have put this to a fixed Nov 08 08:34:15 version as OE only has 1.0+ in it. Nov 08 08:34:28 greentux: ok, thanks for your help in testing - at least we know it works now :) Nov 08 08:34:36 valid FS yes... Nov 08 08:34:56 and you can write a file on it? Nov 08 08:35:12 it has all the dirs /etc /sys /bin .... Nov 08 08:35:25 yes touch a writes a "a" file Nov 08 08:35:28 XorA: are you sure that ipaq has alsa 1.0? Nov 08 08:35:43 ok, 60min away Nov 08 08:35:43 greentux: excellent, thanks. Just wanted to check that all works and it sounds like it does Nov 08 08:36:20 hrw|work: Ipaq doesnt run mplayer-atty AFAIK Nov 08 08:36:26 RP: I suspect matchbox is using pixels for font sizes Nov 08 08:36:43 RP: so you need to poke your boss ;) Nov 08 08:36:44 hrw|work: anyway, the ability to use alsa doesnt require alsa Nov 08 08:37:33 'hi boss. your code is shitty.' 'you're fired' Nov 08 08:38:00 hrw|work: only alsa-lib_1.0.8 is in OE, so if they are using a different version it comes from a non OE place and I cannot do anything about that Nov 08 08:38:31 meeting moved :) Nov 08 08:39:35 morning Nov 08 08:40:31 sound does not work in this version... on borzai Nov 08 08:41:02 greentux: you need to load some modules Nov 08 08:41:41 greentux: sound is still under development. It can be made to work though, as hrw says Nov 08 08:43:37 ok... some doc on the wiki? Nov 08 08:44:55 greentux: No, its such a recent development, there are no docs :) Nov 08 08:45:23 RP: linux-openzaurus.bb probably need some autoload_MODNAME lines Nov 08 08:45:25 ok a little txt... Nov 08 08:46:10 RP: I'll have another sound release Wed/Thu, I'll add a little txt doc that can be pasted on the WiKi Nov 08 08:46:28 ~hail lrg Nov 08 08:46:35 you can send it to me and i put it on the wiki... Nov 08 08:47:02 lrg: great you are Nov 08 08:47:25 greentux: it's not even started yet. I'll write the txt on the train home tonight Nov 08 08:47:57 :) Nov 08 08:48:10 ?-) Nov 08 08:49:33