**** BEGIN LOGGING AT Sun Nov 20 02:59:56 2005 Nov 20 03:14:54 linnuxxy: Patches to the toolchain exist to fix that issue Nov 20 03:32:43 good vacation mickey :) Nov 20 03:57:13 good ... bootstrap-image except the kernel patch i already send and the pppd issue compile straight for h3600 :) Nov 20 04:03:17 RP: is there a prebuilt toolchain for armv6b Nov 20 04:04:43 ******** armv5b Nov 20 04:28:27 linnuxxy: I wouldn't know - I use OE for my toolchains... Nov 20 07:31:31 morning Nov 20 07:54:38 morning Nov 20 08:51:33 hi Nov 20 08:53:40 hi. Nov 20 09:40:03 03hrw 07org.oe.dev * r82395a95... 10/: libnet 1.1.2.1: moved from nonworking by Jamie Lenehan - close #467 Nov 20 09:40:07 03hrw 07org.oe.dev * rd2469721... 10/: Nov 20 09:40:07 libnet 1.1.2.1: updated packaging Nov 20 09:40:07 - man pages goes to libnet-doc Nov 20 09:40:07 - libnet-config goes to libnet-dev Nov 20 10:53:12 03hrw 07org.oe.dev * rb42f83d1... 10/: Nov 20 10:53:12 console-tools: added kbd_mode patch to change keyboard repeat rate Nov 20 10:53:12 - patch provided by Matthias Goebl Nov 20 10:53:12 - close #478 Nov 20 11:16:27 anyone here know a fix or work around for the problem bitbaking dbus-0.23.4? I keep getting an error that dbus_bindings.c is not there. Nov 20 11:16:37 it appears that some people don't have this problem. Nov 20 11:16:38 Thanks Nov 20 11:16:38 Bob Nov 20 12:01:27 re Nov 20 12:03:54 Tygger_Bob: NOTE: package dbus-0.23.4-r1: task do_compile: completed Nov 20 12:05:42 hrw.. I was able to make that work as well by bitbaking python-dbus before I did my gpe build. Nov 20 12:06:55 everything is humming along quite nicely now, but it was sure frustrating before. Nov 20 12:07:36 Tygger_Bob: ah.. hard to test it for me as my current builddir have >1000 packages built already Nov 20 12:08:24 Tygger_Bob: I think you might need to build the native package before the cross version... Nov 20 12:08:28 hrw: hi Nov 20 12:08:50 RP: console-tools patch is nice addition Nov 20 12:09:18 hrw: I was just about to look at that. Does it change the default yet or just let you change it? Nov 20 12:09:27 hrw, no problem at all.. Nov 20 12:09:30 learn as I go :) Nov 20 12:09:43 RP, makes sense Nov 20 12:09:46 RP: you need to tell what to set Nov 20 12:09:58 hrw: But it makes the keyboard work a lot better? Nov 20 12:10:10 RP: if used then yes Nov 20 12:10:35 hrw: If we can work out some nice values, I'll argue that the kernel driver should be able to change the defaults Nov 20 12:10:48 yes Nov 20 12:11:44 I've tracked down the c7x0 bootmem problem, finally. Took most of the afternoon to find: http://www.rpsys.net/openzaurus/patches/revert_bootmem-r24.patch Nov 20 12:11:55 r24? Nov 20 12:12:18 nice patch Nov 20 12:12:23 hrw: Its taken me 24 revisions to narrow it down... Nov 20 12:12:39 small, clean, nice Nov 20 12:12:58 hrw: But why did rmk have to loose that line of code in the first place? :-/ Nov 20 12:13:07 ok. 'werbungs' and then tv series to watch Nov 20 12:13:20 RP: nobody's perfect? Nov 20 12:14:34 hrw|afk: true. just annoying though... Nov 20 13:21:36 re Nov 20 13:23:41 RP: linux-oz devel will be -rc1 or -rc2 based? Nov 20 13:38:57 hrw: Probably -rc2 based given its just come out :) Nov 20 13:42:56 ~lart me Nov 20 13:42:56 * ibot beats hrw senseless with a 50lb Unix manual Nov 20 13:43:26 I did 'patch -p1 --dry-run' to check does 2.6.15-rc2 apply to my kernel sources and then build it Nov 20 13:44:53 RP: tried jffs2 summary maybe? Nov 20 13:47:15 looks like it need more work on image generation time (one tool more to run) but if it can make flash mounting faster... but the question is how it will work with older kernels.. Nov 20 13:49:10 hrw: I think it can just work at boottime as well Nov 20 13:51:42 boottime is mounttime anyway Nov 20 13:52:46 hrw: It just means subsequent boots would be faster Nov 20 13:54:27 looks like something to test :) Nov 20 13:54:39 anyway I plan to move with / to sdcard Nov 20 13:55:08 We really need to start thinking how we can start to fine tune the devices a bit more now... Nov 20 13:55:19 The foundations are gertting a lot better :) Nov 20 13:57:12 RP: awesome job(s) Nov 20 13:58:01 zecke: thanks :) Nov 20 13:58:19 Its nice to see the pattch list shrink... Nov 20 14:00:06 yep. Nov 20 14:00:29 thats remind me about list of things to add to oz354fam083 branch.. Nov 20 14:01:12 hrw: I'm going to clear out the patches directory soon so the kernel is the branch is going to need updating to reference the archive directory... Nov 20 14:01:51 RP: maybe just add all needed patches to repository (for stable)? that way you can remove all of them from archive? Nov 20 14:02:18 hrw: No, They remain in archive for my reference amongst other things :) Nov 20 14:02:27 ok. Nov 20 14:02:34 RP: where is yout git tree ;) Nov 20 14:03:00 zecke: Patch based is easier as in a git tree, you loose the logical seperation between patches Nov 20 14:03:13 same reason I never produced a bk tree Nov 20 14:03:38 and it is easier to fetch few patches then whole tree Nov 20 14:04:17 I use DL_DIR as source for kernel for desktops Nov 20 14:04:29 :) Nov 20 14:05:52 hrw: I've switched to use the 2.6.15-rc2 file this time rather than patches. The reason is when I work on the tree, applying the 2.6.14->2.6.15-rc patch takes up way too much diskspace and time pushing and popping it... Nov 20 14:07:29 yes.. that patch is huge Nov 20 14:08:07 6M bzipped Nov 20 14:08:25 33M unpacked.. horror Nov 20 14:08:41 and let someone review whole at once ;) Nov 20 14:09:05 I go down to the shop.. be back in 10-15m Nov 20 14:11:51 <[AD]Ska> yo Nov 20 14:18:57 wow.. I got spam to email address which I dont use for last 2-3 years.. Nov 20 14:21:57 RP: where was a page with results of auto compilation of arm kernels? Nov 20 14:22:59 ok. found Nov 20 14:33:47 added to delicious :) Nov 20 14:45:00 heh.. again keymap for c7x0 need fix Nov 20 14:45:08 http://bugs.openembedded.org/show_bug.cgi?id=107 Nov 20 14:46:45 RP: ping Nov 20 15:07:47 ok I have fix for two lirc related bugs Nov 20 15:14:23 * v8jlene is back (gone 41:12:26) Nov 20 15:14:33 Morning.. Nov 20 15:15:43 mrning v8jlene Nov 20 15:16:20 v8jlene: you too does not have cxx00 zaurus? Nov 20 15:17:32 hrw: Nope. I'm working on an embedded router build for a small SH4 based appliance (which you can see here http://linux.jjplus.com/index.html) Nov 20 15:19:21 you are the one who added sh4 patches recently? Nov 20 15:19:57 hrw: Will also be working on the same build for an x86 based embedded router (http://www.soekris.com/). And I will have a netgear WGT634U soon which I might try an OE build for as well. Nov 20 15:20:25 hrw: Yep, those sh4 patches are mine... Nov 20 15:21:20 so you are Jamie Lenehan? I pushed libnet into repo but configure.patch should be done better Nov 20 15:22:02 hi guys ,, why is your website sooo down ? Nov 20 15:22:39 hrw: Yep, that's me. Ok, tell me what you don't like, I'll look at it. Thanks for the feedback BTW, can't believe I didn't notice the documenation in the package ;( Nov 20 15:23:15 rob_w: http://oe.handhelds.org/ works.. I dont know why it takes so long to update openembedded.org dns entry Nov 20 15:23:30 v8jlene: look at recent comments in your bugs Nov 20 15:23:31 03hrw 07org.oe.dev * r7eacdaad... 10/: Nov 20 15:23:31 lirc 0.7.1: added X11 dependencies, moved X11 stuff to lirc-x - close #330 Nov 20 15:23:31 - for !sa1100 devices X11 libs are used if available during build Nov 20 15:23:31 so I added all needed deps (taken from package) Nov 20 15:23:31 - X11 utils moved into lirc-x package which make "lirc" depend only on libc and libgcc Nov 20 15:23:36 03hrw 07org.oe.dev * rd2f7bfec... 10/: lirc: fixed path to daemons in initscripts - close #453 Nov 20 15:23:58 great thanks Nov 20 15:25:24 v8jlene: look at http://bugs.openembedded.org/show_bug.cgi?id=467#c6 for example Nov 20 15:25:31 night all Nov 20 15:25:47 hrw: Are you talking about not issue with not patching the input files? I was unsure on that issue so left them in as seperate patches that could easily be excluded. Nov 20 15:44:44 hrw|gone: The caps lock patch needs applying to both c7x0 and cxx00 Nov 20 16:12:31 03rpurdie 07org.oe.dev * r758c704f... 10/: Nov 20 16:12:31 linux-oz-2.6: Drop 2.6.14-rc1 and promote 2.6.14-git3 to stable kernel. Add new Nov 20 16:12:31 dev version 2.6.15-rc2. Dev branch has had large chunks merged with mainline, Nov 20 16:12:31 upgraded to SoC 0.7 (thanks to Liam), many updates to keep up with mainline Nov 20 16:12:31 changes. OSS sound for c7x0 is dropped along with elpp. Nov 20 17:08:26 03rpurdie 07org.oe.dev * r9ef067cf... 10/: linux-oz-2.6: Update SRC_URI after archiving of all dealt with patches Nov 20 17:11:58 * v8jlene is away: working or sleeping Nov 20 17:22:13 good nite Nov 20 19:26:04 Hey all. Nov 20 19:26:47 anyone know a good example .bb file that I could use to compile a single .c file? Nov 20 20:24:39 hi tyggerbob Nov 20 20:25:12 tyggerbob:just need to overwrite a fun do_compile. Nov 20 20:48:46 hello all. Nov 20 20:49:15 what would I put into a .bb file to have OE run a "gcc -o foo foo.c" ? Nov 20 20:49:34 you would put 'gcc -o foo foo.c' in do_compile :P Nov 20 20:49:42 well, $(CC) instead of gcc Nov 20 20:51:40 that's what I thought.. Nov 20 20:51:51 Can you let me know what I'm doing wrong here? Nov 20 20:51:52 http://pastebin.ca/29868 Nov 20 20:52:38 I have a bunch of program like this.. little C files that I want to compile in OE.. Nov 20 20:52:44 once I get the format down, I'm off to the races Nov 20 20:54:57 btw, thanks for the response, Chris Nov 20 21:00:18 Its probably something obvious, but it keeps telling me there's nothing to compile Nov 20 21:09:10 kergoth? Nov 20 21:27:35 Well.. I give up for now.. I've been through the OE user manual looking for examples that might be helpful, but I think it's aimed at someone a bit more knowledgeable than me :) Nov 20 21:27:38 you all have a good night.. Nov 20 21:27:43 * TyggerBob 's hitting the hay. Nov 20 21:45:05 * v8jlene is back (gone 04:33:07) Nov 20 23:09:51 ok , patches sended. Hope they are incorpored in the oe Nov 21 00:50:38 hi all Nov 21 00:52:38 03jbowler 07org.oe.dev * r4f11203e... 10/: ixp-osal: November 16 2005 release from Intel, 2.1 Nov 21 00:52:42 03jbowler 07org.oe.dev * r2b684aa9... 10/: ixp4xx-csr: November 16 2005 release from Intel 2.1 Nov 21 00:52:47 03jbowler 07org.oe.dev * r17a6c067... 10/: ixp400-eth: release for ixp4xx release 2.1: 1.5 Nov 21 00:52:52 03jbowler 07org.oe.dev * r3a7e6f46... 10/: (log message trimmed) Nov 21 00:52:52 slugos: new ethernet driver, ixp4xx release 2.1, ethernet 1.5 (all slugos distros) Nov 21 00:52:52 - Release 1.5 of the ethernet driver is compatible (almost) with Linux Nov 21 00:52:52 - kernel version 2.6, consequently it has been possible to remove a very Nov 21 00:52:52 - large number of the previous patches. Nov 21 00:52:52 - Release 2.1 of ixp4xx-csr is substantially unchanged from the point Nov 21 00:52:54 - of view of kernel 2.6 compatibility, however it has extra functionality Nov 21 00:58:25 moin Nov 21 01:55:42 morning Nov 21 01:58:30 morning Nov 21 01:59:03 morning hrw Nov 21 01:59:10 hi greentux Nov 21 01:59:30 hrw:have a nice weekstart. Nov 21 01:59:46 you too diesert Nov 21 02:00:57 hrw:would you show me how to rebuild kernel after change the ".config"? Nov 21 02:02:42 diesert: use bitbake to unpack/patch/configure kernel, then reconfigure kernel, copy config to OE repo (replace OE one) and build Nov 21 02:07:05 hrw: and I found it have something incorrect to KERNEL does not take somewhat changes after modify the .config Nov 21 02:12:19 afk Nov 21 02:13:00 hrw: in other words that my kernel size is not changed. Nov 21 02:22:54 hrw:thanks a lot Nov 21 02:24:38 morning all Nov 21 02:24:47 morning RP Nov 21 02:25:45 RP:rebuild the kernel after change the .config , how to going on with bitbake? thanks Nov 21 02:26:50 diesert: copy the .config to the defconfig-machine file in the directory about the .config file, then run bitbake -b some-kernel.bb -c configure -f Nov 21 02:29:47 s/about/above/ Nov 21 02:30:14 RP: if change directly the .config in the ${WORKDIR} ? Nov 21 02:31:51 diesert: Yes, change the .config, then copy it over the defconfig file in the directory above it. See the linux-openzaurus.inc file to see what the configure routine does Nov 21 02:32:27 I'm presuming you're using a Zaurus kernel but similar applies for a lot of other devices Nov 21 02:34:43 RP:yes , and I rebuild new-kernel for spitz Nov 21 02:36:05 RP:I think that I should generate a defconfig-spitz, right? Nov 21 02:39:18 thanks RP :) Nov 21 02:40:18 gone **** ENDING LOGGING AT Mon Nov 21 02:59:57 2005