**** BEGIN LOGGING AT Tue Nov 22 02:59:57 2005 Nov 22 03:11:10 v8jlene where can I find this site file ? Nov 22 03:12:28 org.openembedded.dev/site Nov 22 03:13:08 hi,RP. Nov 22 03:13:16 RP:Do 2.6.14 and 2.6.15 kernels for arm support the ACPI ? Nov 22 03:13:48 They contain definitions for different platforms that override the normal configure process. There are php defintions in the i686-linux file but not the other x86 ones. Check your do_configure log first to see which one is actually being used... I'm not sure what epia will be using. Nov 22 03:15:36 diesert: Not that I know of? Nov 22 03:17:21 RP:2.6.14 have not support in source tree for arm Nov 22 03:18:49 RP:it have not source in kernel/arch/arm Nov 22 03:20:22 RP:while I rebuild 2.6.14 after change .config , do_configure spawn .config:197: trying to assign nonexistent symbol ACPI_SLEEP.etc. Nov 22 03:20:51 diesert: ACPI is x86 only as far as I know? Nov 22 03:21:07 RP:oh! Nov 22 03:21:43 RP:Are there any other power management for arm? Nov 22 03:21:50 diesert: Just apm Nov 22 03:22:11 RP:so, thanks a lot :-] Nov 22 03:48:48 http://pastebin.com/436066 Nov 22 03:56:09 where is hrw today? Nov 22 03:59:53 gerwinin: You bugzilla shows "checking if cookie io functions use off64_t... configure: error: cannot run test program while cross compiling". The site files contain a defintion for this. So getting the entry in the correct file should fix it. You postebin shows the target as "i586-oe-linux" Nov 22 04:00:38 gerwinin: So in theory adding "php_cv_lib_cookie_io_functions_use_off64_t=${php_cv_lib_cookie_io_functions_use_off64_t=yes}" to org.openembedded.dev/site/i586-linux should get paste that point Nov 22 04:01:37 gerwinin: should be "past that point"... Nov 22 04:02:08 Okay Nov 22 04:02:16 I am gonna try this out for a moment Nov 22 04:05:53 gerwinin: Although I'm not sure what that "-oe-" is in "i586-oe-linux". I would have thought it would be "i586-linux". My builds have "sh4-linux" which matches the name of the file in the site directory. Anyone know what effect that'll have? Nov 22 04:06:36 Yeah I am trying to fix it now and do a compile and see what happens Nov 22 04:24:52 gerwinin: I've just tried to build php5 for my sh4. I got the same error that you included in your bugzilla. After adding the entries to site/sh4-linux it now works. So all you should have to do is figure out which file under site that you are using and add the entries (there and three, look in site/i686-linux for the php section). Anyway, it's time I was going, so I'll leave you to talk with everyone else ;) Nov 22 04:25:59 * v8jlene is away: Doing other things... Nov 22 06:06:26 hi Nov 22 06:06:48 note to all: do NAND Backup before messing with nand on zaurus Nov 22 06:08:22 hello. Nov 22 06:08:30 hi hrw Nov 22 06:08:39 hrw: caps lock doesnt work Nov 22 06:10:21 greentux: ok. pull and rebuild initscripts Nov 22 06:14:24 waiting for lala :) Nov 22 06:15:39 he is your local build master? Nov 22 06:16:08 he is developer, i am ingenieur Nov 22 06:17:14 hey Nov 22 06:18:03 hi zecke Nov 22 06:18:03 hi zecke, hrw Nov 22 06:18:28 RP: good that Z contain sharp 2.4 stuff which user can login to Nov 22 06:18:56 hrw: Funnily enough, I've never used it Nov 22 06:19:12 RP: I'm trying to get /home working again Nov 22 06:19:27 hrw: You broke it? :-/ Nov 22 06:19:55 ofcourse Nov 22 06:20:24 worst case, dd one of your rootfs images over the device Nov 22 06:20:39 you can tehn delete the files but it should work again Nov 22 06:21:32 http://img258.imageshack.us/img258/5264/bunnyballoon4gm3gp.gif ;)) Nov 22 06:23:05 ~seen lrg Nov 22 06:23:12 lrg is currently on #oe (1d 1m 50s) Nov 22 06:23:32 lrg: yo will get the 3100 next week Nov 22 06:23:42 greentux: lrg = lrg|home today Nov 22 06:23:56 lrg|home: yo will get the 3100 next week Nov 22 06:25:31 rp: aorks liam from time to time for your company? Nov 22 06:27:40 greentux: No, he works for the company that make the sound chips in the zaurus Nov 22 06:27:41 RP: time to test.. jffs2 which I made from /home/ backup mounts under 2.4 Nov 22 06:29:30 RP: mounted. uff Nov 22 06:33:20 greentux: thanks. I look forward to it :) Nov 22 06:44:37 anyone here do work on compiling perl modules on OE? Nov 22 06:45:16 no Nov 22 06:45:20 well not me :) Nov 22 06:45:24 :) Nov 22 06:45:35 Thanks, Crofton|laptop Nov 22 06:45:58 I assume you've tried grepping all the bb files? Nov 22 06:46:03 looking for examples Nov 22 07:03:46 Crofton|laptop, yes.. there's .bb files for perl itself, but I'm not seeing any for the individual modules. Nov 22 07:03:54 anyway, I gotta run, I'll look for them later. Nov 22 07:03:55 Thanks.. Nov 22 07:03:58 bummer Nov 22 07:04:22 grep hhhh packages/*bb is a good way to find examples fo stuff Nov 22 07:06:11 yep.. that's how I find all the CFLAGS_prepend and LDFLAGS examples... Nov 22 07:06:15 thanks... Nov 22 07:06:27 grep -R is your friend Nov 22 07:10:47 Hi folks Nov 22 07:23:15 lrg|home: did you get modules dependencies in alsa modules? Nov 22 07:24:24 hrw: not yet Nov 22 07:25:11 ok - just wanted to know Nov 22 07:25:53 RP: http://pastebin.com/436150 could you apply it? Nov 22 07:28:23 hrw: I want to hold off doing this until we sort it out properly Nov 22 07:28:53 aha - ok for me Nov 22 07:29:41 I'm cleaning my local repo from misc changes Nov 22 07:32:46 03hrw 07org.oe.dev * rf46d15ed... 10/: Nov 22 07:32:46 yamonenv, nylon-scripts, nylon-statistics, logrotate-script: fixed SRC_URI Nov 22 07:32:46 - this fixes #168 Nov 22 07:47:10 CosmicPenguin: could you look into bugs 394 and 404 in bugtracker? both are AMD... Nov 22 07:48:53 I think the patch for 394 is correct Nov 22 07:48:58 I haven't built xfce in a month of sundays Nov 22 07:49:31 I will push 394 then Nov 22 07:52:39 hi Nov 22 07:52:47 hi Bernardo Nov 22 07:53:15 * CosmicPenguin pulls latest OE to see what 404 is all about Nov 22 07:54:16 03hrw 07org.oe.dev * r8a8c054f... 10/: dbh: fix problem with linking - patch by Guillermo Juárez - close #394 Nov 22 08:01:31 ~uptime Nov 22 08:02:36 03hrw 07org.oe.dev * rd6941ce1... 10/: Nov 22 08:02:36 sudo: upgrade to 1.6.8p12 due to CVE-2005-1993 Nov 22 08:02:36 - Race condition in sudo 1.3.1 up to 1.6.8p8, when the ALL pseudo-command is Nov 22 08:02:36 used after a user entry in the sudoers file, allows local users to gain Nov 22 08:02:36 privileges via a symlink attack. Nov 22 08:02:36 - Thanks to Jamie Lenehan for notice Nov 22 08:02:38 - close #486 Nov 22 08:03:19 cu Nov 22 08:55:29 woglinde: hey Nov 22 09:26:38 hi guys, I have a question about the development process Nov 22 09:26:54 is there anyone....? Nov 22 09:33:52 there are lots of people here :) Nov 22 09:34:50 ok ;) Nov 22 09:35:12 I have here a board with an xscale, from toradex Nov 22 09:35:31 they developed with oe and installed glibc Nov 22 09:35:56 the base system is 27megs , and I have a about 28Mb of flash... Nov 22 09:36:04 so I want to port all to uclibc Nov 22 09:36:32 I have changed the OS to "linux-uclibc" Nov 22 09:36:36 iirc you need to change TARGET_OS=linux to linux-uclibc Nov 22 09:36:44 ok ;) Nov 22 09:36:56 but I see that not every version of gcc compiles fine Nov 22 09:37:01 and set some providers for iconv and gettext (again, iirc) Nov 22 09:37:33 umm... ok, I will see this one. Nov 22 09:37:49 I have changed many version of gcc Nov 22 09:38:07 if I change version, the old one is not uninstalled, isn't it? Nov 22 09:38:48 and the dependencies are not recompiled with the new version, right? Nov 22 09:39:48 When changing versions of major components like gcc wiping tmp and starting again would be sensible Nov 22 09:40:19 ok, I supposed that Nov 22 09:42:22 thank you... Nov 22 09:43:23 is there any doc about the .bb files? I mean, I want to change some uclibc config Nov 22 09:43:57 or I should read the file ? Nov 22 09:44:47 generally speaking, of course... Nov 22 09:48:26 there are some docs linked from the wiki Nov 22 09:48:35 but nothing I'd call 'documentation' Nov 22 09:48:40 we need to work on that Nov 22 09:49:39 ok, I dig the wiki, then Nov 22 09:58:19 uh-oh.... Nov 22 09:58:23 you know this? Nov 22 09:58:25 http://oe.handhelds.org/cgi-bin/moin.cgi/StyleGuide Nov 22 09:59:01 surely it's not what you intended... Nov 22 10:04:51 happycactus: fixed, thanks for spotting Nov 22 10:05:04 :) Nov 22 10:05:34 I see that it is not the first time it appens... Nov 22 10:19:56 Koen are you back in nl again ? Nov 22 10:20:18 gerwinin: not until saturday Nov 22 10:20:29 Lucky you Nov 22 10:20:39 It is really cold here and it will get colder koen ! Nov 22 10:20:51 You buy yourself a warm poncho in here Nov 22 10:20:55 :p Nov 22 10:26:16 gerwinin: how much cold? in °C ..? ;) Nov 22 10:26:39 5 degrees Nov 22 10:26:53 not so different from italy ;) Nov 22 10:27:31 north italy, at least... Nov 22 10:27:43 good evening Nov 22 10:28:39 i tried to ask this before, but without success Nov 22 10:28:57 i'm trying to boot my rootfs in qemu Nov 22 10:29:30 i don't know how to make it bootable. Can someone give me some hints? Nov 22 10:34:31 epronk: I think you must create a disk image Nov 22 10:35:36 epronk: doesn't qemu just boot the kernel and you pass the image as a param to qemu? Nov 22 10:35:48 * koen|away suspects that didn't make any sense Nov 22 10:36:27 yes, I created an image but i get a kernel panic Nov 22 10:36:43 "no init found" Nov 22 10:37:11 "try passing init= option to kernel" Nov 22 10:38:35 i created an image manually Nov 22 10:39:02 i could mount it with -o loop, copied the stuff in the rootfs directory to it Nov 22 10:39:37 i did : qemu -kernel bzImage-2.6.11.6 -hda oe.img -append "root=/dev/hda" Nov 22 10:40:02 i can see it mounts the image file read-only Nov 22 10:41:52 qemu -hda oe.img should also work but then i need a bootable image, but I don't know how to create one with oe Nov 22 10:57:37 koen: just for information, the image with uclibc compiled fine ;) Nov 22 10:57:45 thanks a lot Nov 22 11:34:01 03jbowler 07org.oe.dev * rac042169... 10/: nslu2-kernel: release 2.6.15-rc2 Nov 22 11:50:35 If I am in the oe_runmake function, is there any way to tell if what task I was called from? Nov 22 12:00:15 I think when the org.openembedded.dev bitbake was written poodle Nov 22 12:00:20 originally used a buggier pxafb driver. Nov 22 12:00:23 lol Nov 22 12:38:55 03jbowler 07org.oe.dev * r7027b222... 10/: Nov 22 12:38:55 ntp: fix crash in 4.2.0 Nov 22 12:38:55 - Remove gcc4.patch which causes a crash immediately after: Nov 22 12:38:55 - refclock_receive: at 2 127.127.1.0 Nov 22 12:38:55 - because the clktypes array in clocktypes.c is incorrectly initialised, Nov 22 12:38:56 - see the compiler warning messages (from gcc 3.3.4). Nov 22 12:42:14 03jbowler 07org.oe.dev * r57be2e37... 10/: Nov 22 12:42:15 cherokee: release 0.4.29 Nov 22 12:42:15 - this release works with patches to classes/base.bbclass oe_libinstall Nov 22 12:42:15 - to install libpcre.la in staging with 'installed=no', otherwise the Nov 22 12:42:15 - package will fail to compile. The commit does not include the bbclass Nov 22 12:42:15 - fixes (they require more testing) - to use it hand hack libpcre.la in Nov 22 12:42:17 - the staging directory. Nov 22 13:23:52 Hey zecke Nov 22 14:00:17 Ciao all, and according to hrw: 'morning all Nov 22 14:02:26 heh Nov 22 14:02:52 ~ugt Nov 22 14:02:53 i guess ugt is Universial Greeting Time. Created in #mipslinux, it is a rule that states that whenever somebody enters an IRC channel it is always morning, and it is always late when the person leaves. The local time of any other people in the channel, including the greeter, is irrelevant. Nov 22 14:03:18 hey kergoth ! Nov 22 14:03:35 hey Nov 22 14:03:53 how things are going for you ? Nov 22 14:08:58 hi kergoth Nov 22 14:09:00 hi pigi Nov 22 14:09:22 hi pb_! Everithing well ? Nov 22 14:09:31 Everything, even :) Nov 22 14:09:42 pid == fork() won't work so hot, now will it? Nov 22 14:20:07 kergoth, what is up with OE.org dns? Shoud I just fix my broken links? Nov 22 14:57:50 * v8jlene is back (gone 10:31:50) Nov 22 15:06:25 v8jlene I tried your suggestion but it doesn't work Nov 22 15:06:38 gerwinin: Still the same errors? Nov 22 15:07:15 Yeah :( I changed i586-linux and put in a couple of sentences that should make it work Nov 22 15:08:43 gerwinin: I'm wondering if maybe it ned to be i586-oe-linux as it said your target was? I can't quite figure out how the site file is selected... Nov 22 15:09:20 Yeah in machine.conf it says target_vendor ="-oe" Nov 22 15:09:56 gerwinin: BTW, are you using "bitbake -b packages/php/php_5.0.5.bb" after you make changes to the site files? It'll be a lot quicker that way if you not already doing this. Nov 22 15:10:31 Yep, my target doesn't have that target_vendor and I'm not sure what it is changing... Nov 22 15:10:46 Okay Nov 22 15:10:52 Yeah I am doing that Nov 22 15:12:50 What distro are you building for? If I get a chance later today I'll start a build running for epia and your distro so I can see what's happening. (I need to go out for a few hours this morning though, so not for another 6-8hrs). Nov 22 15:15:26 I am building for generic Nov 22 15:23:28 hi all Nov 22 15:47:44 nite folks Nov 22 16:18:49 nite all Nov 22 16:47:11 * v8jlene is away: Doing other things... Nov 22 17:58:41 03florian 07org.oe.dev * r2d9229c5... 10/: Add latest integral version to list of devices using small icons. Nov 22 17:58:45 03florian 07org.oe.dev * r568e4947... 10/: libeventdb: Add new release 0.17 using autotools. Nov 22 17:58:50 03florian 07org.oe.dev * r5cfa5553... 10/: libgpevtype: Add new release 0.13. Nov 22 17:58:54 03florian 07org.oe.dev * rb4f7537d... 10/: gpe-calendar: Add new release 0.66. Nov 22 18:12:11 chouimat: poke of DOOOM Nov 22 18:26:20 hardwire: hmm? Nov 22 19:14:20 hello Nov 22 19:15:19 uhmm, i went through other channels, i'm trying to build a kernel from an ipaq using an NFS mount, but it seems that i have no libraries installed, any clues on what is needed ? Nov 22 20:08:02 * france is away: Away Nov 23 00:44:40 03jbowler 07org.oe.dev * r8bd89f85... 10/: (log message trimmed) Nov 23 00:44:40 base.bbclass: attempt to fix the staging .la problem Nov 23 00:44:40 - when using oe_libinstall to install a libtool library (.la file Nov 23 00:44:40 - present) into the staging directory (${STAGING_LIBDIR}) fix up the Nov 23 00:44:40 - installed .lai file so that it contains 'installed=no' - this Nov 23 00:44:40 - prevents libtool from subsequently using a copy of the build system Nov 23 00:44:43 - library if it exists in the final (target) installation directory Nov 23 01:35:42 03rwhitby 07org.oe.dev * r655c27b2... 10/: nas100d-kernel: Updated for 2.6.15-rc2 Nov 23 01:45:23 morning Nov 23 02:06:37 morning all Nov 23 02:15:22 morning RP Nov 23 02:16:32 morning Nov 23 02:16:48 hi hrw. Nov 23 02:18:28 hi hrw|work Nov 23 02:24:05 hrw:where can find info about reflash kernel on a hard disk ? Mine is spitz SL-C3000,it has a 4GB HD. Nov 23 02:30:07 hi,RP Nov 23 02:30:22 RP:would you know about it ? Nov 23 02:38:13 diesert: you mean (re)flashing from hdd instead of sd/cf? Nov 23 02:38:19 hi zecke Nov 23 02:42:17 hrw:yes.it is Nov 23 02:42:44 diesert: then I dont know - send me spitz or borzoi so I will look into that Nov 23 02:42:47 :) Nov 23 02:45:49 in other words: I don't know because I never seen that device(s) Nov 23 02:48:08 hrw:what should I do how to send you spitz ? you mean than spitz info? Nov 23 02:48:27 * v8jlene is back (gone 10:01:15) Nov 23 02:53:50 diesert: Look on the openzaurus website for instructions on reflashing Nov 23 02:55:48 RP:I have only found about reflash on CF **** ENDING LOGGING AT Wed Nov 23 02:59:56 2005