**** BEGIN LOGGING AT Tue Nov 14 02:59:57 2006 Nov 14 06:55:35 what are conditions to be able to do a bitbake myown-image --- i did a task-myown.bb and a meta-myown.bb , what else doi miss ? Nov 14 06:59:57 rob_w: myown-image.bb? Nov 14 07:01:06 hmm i though this is substituted by the meta one .. as i also dont find a gpe-image.bb but a meta-gpe.bb Nov 14 07:01:41 rob_w: Hmm, no idea.. I've only ever dealt with opie-image.bb Nov 14 07:52:41 good morning all Nov 14 07:52:58 RP: the error messages from bitbake trunk look a bit scary: http://rafb.net/paste/results/4S968d32.html Nov 14 07:59:59 hi Nov 14 08:00:01 <_law_> hi Nov 14 08:00:20 hi all ! Nov 14 08:00:40 <_law_> i currently try to setup a gpe-image for my palm t3, whats distro should i use do start? angstrom? Nov 14 08:03:19 i think yes Nov 14 08:15:37 03koen 07org.oe.dev * r74b68b4a... 10/ (1 packages/angstrom/task-angstrom-x11.bb): task angstrom x11: add .desktop file for rxvt Nov 14 08:17:33 my rxvt is a little too pink :) Nov 14 08:30:31 morning Nov 14 08:33:32 hey men , what do you think of the eclipse Target Manager & DSDP stuff ? could be useful for OE ? Nov 14 08:35:15 morning all Nov 14 08:36:33 koen: It is a bit scary isn't it :} Nov 14 08:36:49 RP: yes :) Nov 14 08:37:33 03koen 07org.oe.dev * r9406d43c... 10/ (1 classes/distutils-base.bbclass): distutils-base bbclass: exclude debug files from $bindir and $libdir, PYTHON_DIR still contains them, see bug #1581 Nov 14 08:37:34 03koen 07org.oe.dev * rbe96bb9f... 10/ (1 packages/python/python-fuse_cvs.bb): python-fuse: add it Nov 14 08:42:24 * koen bumps PR on glibc Nov 14 08:42:26 * koen hides Nov 14 08:43:26 03koen 07org.oe.dev * r0da15837... 10/ (4 files in 3 dirs): Nov 14 08:43:26 glibc 2.5: add patch to fix Nov 14 08:43:26 "Assertion `sizeof (req) - ((size_t) &((struct req *)0)->pad) == 3' failed." Nov 14 08:43:26 on ARM/OABI Nov 14 08:45:12 ~prod koen Nov 14 08:45:14 * ibot zaps koen with a high voltage cattle prod Nov 14 08:45:32 hey XorA Nov 14 08:45:50 hey Nov 14 08:46:48 I can't seem to get gdb (6.3 or 6.4) to compile... Nov 14 08:46:57 ends up looking like this http://rafb.net/paste/results/byJXr741.html Nov 14 08:47:14 03koen 07org.oe.dev * r84ae7207... 10/ (3 files in 2 dirs): gmailfs: update to 0.7.2 Nov 14 08:47:15 has anyone come across this before? Nov 14 09:05:46 morning Nov 14 09:05:58 tkp: probably i586 site file lack some entries Nov 14 09:06:54 Should I commit the site file changes I have? That would remove most of the ix86 issues :} Nov 14 09:07:01 hmm Nov 14 09:07:56 RP: sounds like a nice idea :) Nov 14 09:07:56 morning all Nov 14 09:07:56 hi Liam Nov 14 09:07:56 03koen 07org.oe.dev * r9a82479a... 10/ (1 packages/glibc/glibc-2.4/glibc-check_pf.patch): Nov 14 09:07:56 add check_pf.patch to glibc-2.4/ as well Nov 14 09:07:56 ~lart FILESDIR Nov 14 09:07:56 * ibot takes out FILESDIR with the trash Nov 14 09:08:15 hey lrg Nov 14 09:08:27 hey Richard, Graeme Nov 14 09:08:50 * lrg has been getting his mug shot taken for India Visa Nov 14 09:09:02 :-D Nov 14 09:09:22 not using the coconuts piccy then :-) Nov 14 09:09:42 XorA: ehm, err no Nov 14 09:09:50 :) Nov 14 09:12:16 RP: do you have any entries for gdb in your new site file changes? Nov 14 09:12:41 tkp: No new entries, I just merged what was there Nov 14 09:14:16 * lrg -> train Nov 14 09:14:20 bbl Nov 14 09:14:46 RP: data_dump() where to put? Nov 14 09:15:10 hrw|work: Could you try the lastest bitbake first? Nov 14 09:16:04 hrw|work: You'd need to add self.dataDump(taskData) to the end of prepare_runqueue and use -DDDD Nov 14 09:18:00 03rpurdie * r670 10bitbake/lib/bb/runqueue.py: runqueue.py: Catch EventException and don't print a backtrace Nov 14 09:24:55 RP: latest (r669) running Nov 14 09:28:07 The crosscompiling gods kill another kitten: http://article.gmane.org/gmane.comp.file-systems.fuse.devel/3840 Nov 14 09:30:28 in other news: suns java compiler requires suns java compiler Nov 14 09:30:42 lots of kittens getting killed this morning :( Nov 14 09:30:46 03koen 07org.oe.dev * r920d9525... 10/ (4 files in 3 dirs): fuse: update to 2.6.0 Nov 14 09:31:04 koen: Cross-compiling certainly exposes quite a few makefile bugs.. Nov 14 09:32:14 and a lot of "nice in theory" kind of stuff Nov 14 09:34:18 koen: at least as of march, the Java stuff can be fixed Nov 14 09:36:49 ok Nov 14 09:37:12 its a little wet here Nov 14 09:37:15 hrw|work: ljp survived :) Nov 14 09:37:39 zecke: you'll have to give mickey|zzZZzz that money back then Nov 14 09:38:02 lol Nov 14 09:38:08 ~lart ubuntu edgy Nov 14 09:38:08 * ibot puts on a hockey mask and jumps out at ubuntu edgy Nov 14 09:38:20 RP: started Nov 14 09:47:09 have there been any recent chnages to bitbake that cause the following error when i am trying to build a self-defined package .. Nov 14 09:47:45 RP: http://pastebin.ca/248184 is correct one? Nov 14 09:47:58 NOTE: Unpacking /home/pascal/slug/openslug/tmp/work/bo6-0.2-r1 to /home/pascal/slug/openslug/tmp/work/bo6-0.2-r1/ Nov 14 09:47:58 cp: cannot copy a directory, `/home/pascal/slug/openslug/tmp/work/bo6-0.2-r1', into itself, `/home/pascal/slug/openslug/tmp/work/bo6-0.2-r1/./bo6-0.2-r1' Nov 14 09:48:10 03xora 07org.oe.dev * rfe0bd722... 10/ (4 files in 3 dirs): Nov 14 09:48:10 gtk+_2.10.6.bb : rediffed the single-click and spinbutton patches and apply Nov 14 09:48:10 only one leftover patch to be applied to 2.10.6 for handheld use now. Nov 14 09:48:15 03koen 07org.oe.dev * r2001ac2a... 10/ (1 packages/cups/cups_1.1.23.bb): cups: fix SRC_URI, courtesy Todd Blumer Nov 14 09:48:24 RP: hm. its wrong one. Nov 14 09:48:56 XorA: how many of gtk patches are secured to be applied on pda only? Nov 14 09:49:18 i am trying to figure out what i am doing wrong ... but can't seem to find it ... the bb-file in question is http://pastebin.ca/248181 Nov 14 09:50:59 RP: fixed, restarted Nov 14 09:51:00 hrw|work: none of them, but then they never have been in OE Nov 14 09:51:22 XorA: I will build gpe for my progear soon Nov 14 09:51:41 anybody that can share some insight in why i am going a broken do_extract stage ? Nov 14 09:52:03 hrw|work: those patches don't interfere on a desktop Nov 14 09:52:21 ok Nov 14 09:52:49 koen: do we still have small filerequester patch? Nov 14 09:52:55 koen: any idea what the gtk+-handhelds patch acheives, it renames a function and then makes the original called the renamed, but it seems senseless Nov 14 09:53:08 XorA: I have no idea Nov 14 09:53:21 XorA: you'd have to ask pb_ or florian_kc Nov 14 09:53:57 XorA: just calling it without anything else? Nov 14 09:54:31 florian_kc: as far as I can see the same args, unless in my pain killered stupour last night I missed something Nov 14 09:55:51 XorA: maybe some historic stuff where the remainings were kicked out but the function stuff was left over Nov 14 09:56:18 gtk+-2.4.13/gtk+-handhelds.patch is quite large Nov 14 09:56:20 RP: this debug log will be big Nov 14 09:57:21 I am tempted to merge most changes from gtk+-handhelds but miss out the gtkcalendar changes Nov 14 09:57:26 hrw|work: You can truncate it after executing runqueue Nov 14 09:57:33 I understand the rest of them Nov 14 10:00:51 03rpurdie * r671 10bitbake/lib/bb/ (runqueue.py taskdata.py): taskqueue/runqueue.py: Remove matches_in_list and both_contain functions and use tasks_lookup instead - 33% speedup for world runqueue calculation Nov 14 10:02:32 RP: o.. another speedup for me? Nov 14 10:03:20 hrw|work: Just something I noticed - shouldn't change functionality but will just speed up the "preparing runqueue" stage for a world build... Nov 14 10:03:35 thx Nov 14 10:03:37 Removed about 10 million function calls :) Nov 14 10:04:07 Only makes about 1.6 million of them now... Nov 14 10:04:33 sorry, 6 million Nov 14 10:05:23 the overall parsing seems faster as well since ~3 days ago Nov 14 10:05:52 s/since/compared to/ Nov 14 10:06:06 That's possible as the fetcher localpath methods were speeded up (cached) Nov 14 10:06:23 I wondered if we'd notice the difference :) Nov 14 10:06:55 "According to Packard, X.org 7.3 shouldn't even require an xorg.conf -- everything should be autodetected at run time. X.org will receive information about new devices dynamically from D-Bus. X.org will also be moving to fontconfig to make fonts more dynamic." Nov 14 10:08:13 RP: http://bazaar-vcs.org/Performance/0.12 Nov 14 10:08:21 RP: we should findout what "lazy imports" meant for bazaar Nov 14 10:08:32 I'm not looking forward to debugging kdrive + input-hotplug + tslib Nov 14 10:09:45 zecke: Looks interesting although bitbake's startup time is mainly in stat syscalls now... Nov 14 10:12:34 zecke: 117,398 stat calls Nov 14 10:12:47 We don't have that many files... Nov 14 10:18:25 just stat every file 25 times Nov 14 10:20:14 koen: It proves it will make a nice startup speedup though :) Nov 14 10:22:56 RP: hehe, that is all from bbclass, inc and conf :) Nov 14 10:23:30 RP: every file has a dependency and we check them for each :) Nov 14 10:23:37 but I thought we had a stat cache somewhere Nov 14 10:24:04 zecke: I thought we had too but something is obviously not using it Nov 14 10:24:15 python itself maybe? Nov 14 10:24:46 bitbake still dumping... Nov 14 10:24:56 zecke: cache.py looks guilty Nov 14 11:00:52 * XorA wishes for a faster ipkg-make-index Nov 14 11:02:50 XorA: iirc psokolovsky had patches to make it go 5 times faster Nov 14 11:03:07 is there a way to bitbake a single task - do_package() for example? Nov 14 11:03:15 koen: running on my hosted server its very slow Nov 14 11:03:23 XorA: by using the python tar and ar stuff instead of doesn os.system(tar foo) Nov 14 11:03:32 tkp: bitbake --help Nov 14 11:03:45 ;) ta Nov 14 11:05:48 dump_data() takes eons.. Nov 14 11:08:58 Packaged contents of gtk-printbackend-cups into /data/build/koen/OE/build/tmp/angstrom/deploy/glibc/ipk/gtk-printbackend-cups_2.10.6-r5_armv5te.ipk Nov 14 11:08:59 finally Nov 14 11:09:24 koen: another gtk+ update? Nov 14 11:09:30 XorA: yes Nov 14 11:09:45 koen: careful you dont wipe mine, as Im about to checkin the final one Nov 14 11:10:37 XorA: it removes one patch Nov 14 11:11:04 03koen 07org.oe.dev * r5084a3f1... 10/ (1 packages/gtk+/gtk+_2.10.6.bb): gtk+ 2.10.6: fix cups backend by removing a stale patch Nov 14 11:14:29 XorA: and it takes a lot of trouble to wipe someones changes using monotone Nov 14 11:16:44 XorA: if you do 'mtn sync ; mtn up' now it will either silently merge our changes, or pop up a 3way diff tool Nov 14 11:20:16 koen: I will do when ipkg-make-index finishes in about an hour Nov 14 11:21:24 XorA: using the patches ipkg-make-index we have in OE? Nov 14 11:21:42 koen: yes Nov 14 11:33:03 hey gerwinin Nov 14 11:33:18 Zecke do you know what the current version of OPIE_CVS_PV should be in opie class ? Nov 14 11:33:26 hey Koen ! Nov 14 11:33:33 gerwinin: 1.2.2+cvsSRCDATE iirc Nov 14 11:34:11 hrw so if I fill in there 1.2.2+cvsSRCDATE is should be okay ? Nov 14 11:35:38 Oh wait I guess it should be 1.2.2+cvs$(SRCDATE) ? Nov 14 11:36:26 classes/opie.bbclass:OPIE_CVS_PV = "1.2.2+cvs-${SRCDATE}" Nov 14 11:37:58 It is generating errors with me single quoted string :( Nov 14 11:53:49 hmm. looks like I overloaded machine Nov 14 11:56:51 Which machine hrw ) Nov 14 11:57:05 The hwtechnik :) Nov 14 12:01:30 gerwinin: amd64 3500+ Nov 14 12:02:48 27927 hrw 15 0 73748 68m 1412 S 58.9 7.3 27:39.10 python 4131 hrw 15 0 6512 1332 848 S 31.6 0.1 17:44.03 screen Nov 14 12:02:51 ops. Nov 14 12:03:02 python 58.9%, screen 31.6% Nov 14 12:03:51 caching took most of ram Nov 14 12:04:14 *yawn* Nov 14 12:04:15 morning folks Nov 14 12:04:18 1G ram, 15M free, 828M in buffers/cache Nov 14 12:04:20 hi mickeyl Nov 14 12:04:34 and no root to drop_caches Nov 14 12:04:59 BTW: I got 802.11g CF card yesterday Nov 14 12:05:12 With intersil chip ? Nov 14 12:05:17 gerwinin: marvell Nov 14 12:06:12 card is unnamed currently Nov 14 12:06:23 Goodmorning mickeyl Nov 14 12:06:37 Interesting :) Nov 14 12:07:48 hey gerwinin. long time no see! how's life been to you in the past? Nov 14 12:07:54 Good Nov 14 12:08:06 How about you ? Nov 14 12:08:31 mixed ;) 2005 was one of the shittiest years in my life and 2006 was one of the best. Nov 14 12:08:58 What happened ? Nov 14 12:08:59 mickeyl: it isn;t 2007 yet ;) Nov 14 12:09:01 ~lart memory managment Nov 14 12:09:01 * ibot flings poo at memory managment Nov 14 12:09:05 good morning mickeyl Nov 14 12:09:13 2005 I had all sorts of troubles with my wife and with my thesis Nov 14 12:09:34 2006 troubles were fading and I submitted my thesis Nov 14 12:09:34 :D Nov 14 12:09:37 And now thesis finished and wife gone ? Nov 14 12:09:40 hehehe Nov 14 12:09:43 no no Nov 14 12:09:48 wife still there, but all is going well again Nov 14 12:09:50 mickeyl: and you got new toy Nov 14 12:10:13 righto. i launched my freelancer career and I was dragged into that wonderful new project Nov 14 12:10:30 I kicked out my wife in 2005 type mismatch :) Nov 14 12:10:51 do you have children? Nov 14 12:11:00 not that I now of Nov 14 12:11:09 not that I know of Nov 14 12:11:09 hehe. then it's ok. it's always sucky for the poor children when parents split Nov 14 12:11:16 * XorA now wonders at the #oe divorce rate Nov 14 12:11:35 XorA: plan to start? Nov 14 12:11:44 hrw|work: already did once Nov 14 12:12:09 XorA: so you have qualifications now Nov 14 12:12:51 ~curse memory managment in linux Nov 14 12:13:00 May you be reincarnated as a Windows XP administrator, memory managment in linux ! Nov 14 12:15:26 What kind of project are you busy on mickeyl ? Nov 14 12:15:53 I'm working on the famous OpenMoko phone platform stack Nov 14 12:16:07 ~openmoko Nov 14 12:16:10 RP: -rw-rw-r-- 1 hrw hrw 14G Nov 14 04:38 fetchall.log Nov 14 12:16:18 RP: still want it? Nov 14 12:16:31 RP: it is growing still... Nov 14 12:16:32 Cool from fic :) Nov 14 12:16:57 ibot: openmoko is a joint venture of FIC and the open source community creating a complete open source phone platform stack. Nov 14 12:16:59 mickeyl: okay Nov 14 12:17:05 ibot: openmoko is also see http://openmoko.com Nov 14 12:17:06 mickeyl I am busy on some sticky via stuff but doesn't really want to work :( Nov 14 12:17:08 mickeyl: okay Nov 14 12:17:12 hrw|work: wife-1.0 was incompatible with linux Nov 14 12:17:29 gerwinin: you're still doing Opie stuff? Nov 14 12:17:33 Yes Nov 14 12:18:40 hunting for cf8385-5.0.17.p2-210.tbz cf8385-5.0.16.p0-26306.tbz - someone has them maybe? Nov 14 12:19:17 XorA : wife 1.0 leaded to kernel panic , wife 1.1 had a segmentation fault , 1.2 caught a sigterm :) Nov 14 12:19:34 hrw: I have cf8385-5.0.10p0-144 here, but am not allowed to share it Nov 14 12:19:45 gerwinin: your working you way through fast :-) Nov 14 12:20:26 IvoC: I have 5.0.11 Nov 14 12:20:37 IvoC: 5.0.11 can be fetched from sparklan website even Nov 14 12:20:51 IvoC: got them working under 2.6? Nov 14 12:21:21 just travelled a lot Nov 14 12:21:28 no, 2.4.17 (MontaVista), both cf8385 and sd8385 (on different devices) Nov 14 12:21:28 gerwinin: I have quit Opie. (like almost all other developers) Nov 14 12:21:44 mickeyl where are you developing for now ? Nov 14 12:21:50 gpe ? Nov 14 12:22:07 IvoC: ah. they are buildable for 2.4 but for 2.6 they need patching. Nov 14 12:22:22 gerwinin: atm. all resources are for OpenMoko platform. I plan to make this usable on PDAs and WebPads eventually. Nov 14 12:22:30 hrw: merge with the OLPC libertas driver.. Nov 14 12:22:49 IvoC: gumstix guys have 5.0.16/17 patched. My customer try to get updated from manufacturer of card. Nov 14 12:22:58 IvoC: olpc is for usb version.. Nov 14 12:23:06 RP: 15G now.. Nov 14 12:23:14 mickeyl , I am trying to make a platform now for mini-itx Nov 14 12:23:19 ALL: do not use dump_data() in bitbake Nov 14 12:23:36 03koen 07org.oe.dev * ra6910dfa... 10/ (1 packages/notecase packages/notecase/notecase_1.2.6.bb): Nov 14 12:23:36 notecase: add 1.2.6 of the notecase outliner Nov 14 12:23:36 * hand written makefile that has 'CXX=gcc', among other things.... Nov 14 12:23:37 mickeyl for set top boxes and stuff Nov 14 12:23:45 hrw: I have heavily patches the 8385 driver for my customer's system - reworking re-association, ad-hoc JOIN/CREATE, power management etc etc Nov 14 12:23:52 s/patches/patched/ Nov 14 12:24:09 gerwinin: cool. one of these days I have to get you in touch with the product manager from FIC. perhaps we can arrange something to work together on a project next year Nov 14 12:24:23 That would be cool Nov 14 12:24:45 Mickeyl but for now I am solving an issue why my oe doesn't compile anything Nov 14 12:24:59 hrw: do you have access to the Marvell extranet ? Nov 14 12:25:25 IvoC: nope., but can ask for it probably. Nov 14 12:27:43 hrw: that supposedly should have the sources available, but you have to ask for the exact access permissions for them - I've been trying for months, but without success - I have been given access to a lot of irrelevant "proprietary" information, but not for the 8385 (which is the only product we use from Marvell).. Nov 14 12:28:35 * XorA would suggest if you know any Intel engineers that transitioned to get them to check it out when they land in Marvell Nov 14 12:30:37 xora: well, frankly, my products containing the 8385s are already on the market - the project I'm working on now will use a different vendor's wifi SIP Nov 14 12:31:21 IvoC: Im just hoping hrw|work's drive to get 802.11g on Zaurus works out so I can have some 802.11g goodness Nov 14 12:31:52 RP: 17G log Nov 14 12:33:23 RP: I will kill it when it will goes into 50M Nov 14 12:33:26 RP: I will kill it when it will goes into 50G Nov 14 12:36:51 03koen 07org.oe.dev * r143bc84d... 10/ (3 files in 3 dirs): sysvinit: attempt to fix #1582 Nov 14 12:45:08 hrw|work: It sounds like its looping. It should never get that big :-( Nov 14 12:45:28 hrw|work: I'd kill it... Nov 14 12:46:13 RP: want it? :D Nov 14 12:50:17 hrw|work: Can you extract the first 5MB? Nov 14 12:51:19 can Nov 14 12:52:58 RP: http://ewi546.ewi.utwente.nl/tmp/hrw/t/5m.bz2 Nov 14 12:53:32 is the gumstix stuff in OE maintained? Nov 14 12:53:55 XorA: you'd have to ask mr Gupta Nov 14 12:54:26 koen: Gupta? Nov 14 12:54:36 hrw|work: Sorry, it didn't get interesting, maybe the first 25MB compressed? Nov 14 12:55:04 do13: ping Nov 14 12:55:20 ~prod lrg Nov 14 12:55:20 hey all Nov 14 12:55:31 * ibot zaps lrg with a high voltage cattle prod Nov 14 12:55:38 * XorA does the muttley laugh Nov 14 12:55:47 * lrg arghh that stings Nov 14 12:55:56 hi Liam Nov 14 12:56:05 hey Marcin Nov 14 12:56:47 hey wookey__ Nov 14 12:57:25 hey lrg Nov 14 12:57:35 hey Koen Nov 14 12:57:57 RP: same file Nov 14 12:58:09 RP: refetch 5m.bz2 (its 25M but same name) Nov 14 13:03:28 03xora 07org.oe.dev * r9addc808... 10/ (3 files in 3 dirs): Nov 14 13:03:28 gtk+_2.10.6.bb : the gtk+-handhelds.patch merged. Nov 14 13:03:28 Changes to gtkcalendar.c have been dropped as these seems to amount to no Nov 14 13:03:28 actual functional change and may just be leftovers from previous patch Nov 14 13:03:28 merges. Nov 14 13:04:50 hrw|work: You're running data_dump for every task in the runqueue which is why the log is as large. dump_data should have 8 spaces in front of it, I suspect you have 12? Nov 14 13:05:04 probably Nov 14 13:06:57 RP: changed, restarted Nov 14 13:22:52 is the nslu2 magic makefile still in use? Nov 14 13:32:02 koen: push no-hardcoded-cxx.patch please Nov 14 13:38:07 hrw|work: where to get such a card (CF 802.11g) ??? Nov 14 13:38:33 schurig: linksys has been selling them for quite a while Nov 14 13:39:55 schurig: ambicom Nov 14 13:40:16 schurig: trisoft will sell them in months Nov 14 13:41:12 hi Crofton Nov 14 13:41:56 gm Nov 14 13:49:45 huhu Nov 14 14:05:07 hmmm, what is this strange package source file for xcalibrateext ? http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/3.5.4/sources/git_anongit.freedesktop.org.xorg.proto.calibrateproto.tar.gz Nov 14 14:05:39 hey lrg ! Nov 14 14:06:52 lrg: did you try the 2.6.19-r5 release on your ADS ? Nov 14 14:07:31 valLongfield: not yet, possibly have a chance later in the week. Nov 14 14:07:31 Hi all, could someone look at this: http://pastebin.ca/248284 For some reason quilt-native is failing in do_stage. Any ideas? Nov 14 14:07:55 It seems it works now Nov 14 14:07:57 lrg, valLongfield: you guys talking about mx21ads, or a different ADS ? Nov 14 14:08:08 IvoC: I'm working on mx31ads Nov 14 14:08:38 val: ok tnx Nov 14 14:10:01 I fixed my problem Nov 14 14:10:05 lrg: because I think something has introduced problems: the 2.6.16 I built with only Freescale patches using OE works perfectly on my ADS, but not 2.6.19-rc5 you comitted yesterday Nov 14 14:11:40 lrg: btw, Freescale patches apply well on 2.6.16.19, but not on 2.6.16 (I had forgotten to take .19 rev ...) Nov 14 14:12:25 valLongfield: it worked on 2.6.18 recently, I think it will just be a minor issue Nov 14 14:13:17 IvoC: I almost have a 2.6.19 bb for mx21, will try and finish soon Nov 14 14:13:41 lrg: I changed the mx31ads kernel a bit Nov 14 14:14:58 koen: np, what needed changing ? Nov 14 14:15:21 lrg: I made EABI optional and we track maintainer in a seperate file now Nov 14 14:15:49 koen: thanks, I'll copy for mx21 Nov 14 14:22:03 lrg: that would be xcellent - have mx21ads lying here - did you have to cope with the ECC bug in the nand flash controller? Nov 14 14:22:50 IvoC: no, I'm only working on audio. I don't have any time for other subsystem atm :( Nov 14 14:25:10 03koen 07org.oe.dev * rc1863be3... 10/ (3 files in 3 dirs): notecase: add missing patches Nov 14 14:25:16 03koen 07org.oe.dev * rdc2bb99b... 10/ (1 packages/linux/mx31ads-kernel_2.6.19rc5.bb): mx31ads: add eabi switch and some stylistic changes Nov 14 14:25:45 will we switch to linux-STH names for kernels? Nov 14 14:26:13 linux-mx31ads_2.6.19rc5.bb with PV="2.6.18+2.6.19-rc5"... Nov 14 14:26:57 lrg: I do have 2.6.16.20 running on mx21ads (based on the patches on the SoftGun SF project page) Nov 14 14:27:13 hi Nov 14 14:28:29 i try to install 1.1.0r121 for Zaurus SL-C760. but when I update uboot, and lauch Xwindows, my sound not works (mixer not move), etc Nov 14 14:28:31 IvoC: no 2.6.19rc5, based on Jay Monkman's patch for csb5535 (iirc) Nov 14 14:28:54 zauruspain: this is not distro support channel Nov 14 14:29:04 zauruspain: go #cacko and try to catch sashz Nov 14 14:29:52 ok thanks hrw|work Nov 14 14:34:22 RP: http://ewi546.ewi.utwente.nl/tmp/hrw/t/fetchall.log.bz2 - 25M unpacked Nov 14 14:40:20 hrw|work: u-boot_LABEL.2006.06.30.2020.bb's do_fetch causes an exception Nov 14 14:40:35 hrw|work: other than that, it only appears to be running do_fetch functions now Nov 14 14:42:50 hrw|work: It also appears that when it reruns the runqueue after a runtime failure, its breaking... Nov 14 14:42:51 RP: and it does not have own one defined Nov 14 14:43:23 RP: I do not have git on machine Nov 14 14:43:28 thats probably this. Nov 14 14:43:44 that could break it... Nov 14 14:43:45 bitbaking git-native... Nov 14 14:44:24 I with it would show the exceptions when it does this. I tried to make it do that bug the debug for failed shell functions was then messy :-( Nov 14 14:44:34 s/with/wish/ Nov 14 14:45:35 hrw|work: Its a bug in the git fetcher :-( Nov 14 14:46:30 03rpurdie * r672 10bitbake/lib/bb/fetch/git.py: git.py: Fix conversion error Nov 14 14:47:06 output of 8 threads of bitbake is total mess Nov 14 14:47:27 we need the gui... Nov 14 14:48:37 * koen whispers 'ncurses' to the bottom on mickeyl's todo list Nov 14 14:49:10 I thought the gui was on the neo1973 :-D Nov 14 14:49:24 * koen starts mentally preparing for the flood of newby questions after the FIC launch Nov 14 14:50:13 * koen adds hotkeys for "your BBPATH is wrong" "no, that's gcc3 on your host, apt-get install gcc-3.3" and "see " Nov 14 14:50:31 | lt-file: could not find any magic files! Nov 14 14:50:33 argh.. Nov 14 14:50:46 koen: when that happens it is time for #oe-users Nov 14 14:51:09 XorA: or we can move to #oe-snobs Nov 14 14:51:31 koen: I prefer #oe-bastards Nov 14 14:52:13 BOEFH Nov 14 14:54:54 hi ChanServ Nov 14 14:54:57 chouimat: hi Nov 14 14:54:58 ;D Nov 14 14:55:10 morning Nov 14 14:55:17 ~lart file-native 4.18 Nov 14 14:55:17 * ibot stuffs file-native 4.18 into a shiny new tin can and vacuum seals it Nov 14 14:55:18 hrw|work: cool a promotion :) Nov 14 14:55:44 chouimat: with or without a pay raise ? ;) Nov 14 14:56:00 IvoC: without :( Nov 14 14:56:14 someone have SL-C760 with pdaXrom? Nov 14 14:56:30 zauruspain: pdaX is not built with OE so we do not have Nov 14 14:56:45 "this is still not a distribution support channel" Nov 14 14:56:49 like the topic says Nov 14 14:57:17 sorry Nov 14 14:57:29 RP: bitbake git-native fails on file-native/do_compile. but bitbake -crebuild file-native works. lack of deps in file-native? Nov 14 15:00:35 hmm.. bitbake git-native Nov 14 15:00:46 hmm.. "bitbake git-native" should not build cross tools.. Nov 14 15:03:19 git-native depend on zlib... Nov 14 15:03:46 hm.. should not Nov 14 15:04:27 okokok Nov 14 15:04:29 you know what Nov 14 15:04:30 i' Nov 14 15:04:40 i'll spend an hour on that ncurses example _now_ Nov 14 15:05:15 someone know how to do 'grep STH file --unique'? Nov 14 15:07:45 bitbake -nv is totally different then it was with 1.4/1.6 Nov 14 15:09:24 hrw|work: grep STH file|sort|uniq? Nov 14 15:09:31 can I override EXTRA_IMAGECMD_jffs2 from local.conf ? I tried 'EXTRA_IMAGECMD_jffs2 = "-e 16384 "', but the generated "run.image_cmd.XXXX" still contains the options from the machine conf file ( --eraseblock 0x40000 ) Nov 14 15:09:56 NAbyss: without sorting Nov 14 15:10:05 hrw|work: Not unless uniq supports it =/ Nov 14 15:10:09 IvoC: if the machine.conf is wrong, that should be fixed Nov 14 15:10:18 ah.. uniq... Nov 14 15:10:56 DEPENDS="ipkg-utils-native file-native quilt-native virtual/arm-linux-gcc virtual/libc" Nov 14 15:11:06 this is WRONG Nov 14 15:11:28 git-native should not depend on target stuff Nov 14 15:12:30 what do you think? Nov 14 15:13:42 hrw|work: git itself is WRONG ;) Nov 14 15:13:55 you too ;D Nov 14 15:18:38 hrw|work: looks like native.bbclass doesn't work Nov 14 15:23:29 its base.bbclass Nov 14 15:23:40 58 DEPENDS_prepend="${@base_dep_prepend(d)} " Nov 14 15:25:14 someone know why I got vim 80x25 in remote screen session? (terminal is much bigger) Nov 14 15:25:59 native inherit base Nov 14 15:26:11 base adds @base_dep_prepend into DEPENDS Nov 14 15:30:01 hrw|work: http://rafb.net/paste/results/ywn1dC17.html ? Nov 14 15:31:08 hrw|work: Something certainly looks very wrong... Nov 14 15:32:22 koen: nope Nov 14 15:33:10 hrw|work: more than one person opened the screen? Nov 14 15:33:32 XorA: nope Nov 14 15:33:52 XorA: one subscreen is fullscreen, other is 80x24 Nov 14 15:33:57 "Give a man a fish and he'll have food for a day. Teach him how to fish and he'll ruin your fishing economy." Nov 14 15:34:14 hrw|work: tried ctrl-a shift-f? Nov 14 15:34:39 RP: base.bbclass need check for being inherited from native.bbclass Nov 14 15:34:43 hrw|work: it all works fine for me accept when I have two different connections to the same screen, then the screens tand to stick to the lowest res Nov 14 15:34:44 koen: yep Nov 14 15:35:34 hrw|work: native should set INHIBIT_DEFAULT_DEPS (see base_dep_prepend in base.bbclass) Nov 14 15:37:42 [hrw@misc1 celinux-test]$ bitbake git-native -e|grep ^DEPENDS Nov 14 15:37:42 DEPENDS="ipkg-utils-native file-native quilt-native virtual/arm-linux-gcc virtual/libc" Nov 14 15:37:44 still.. Nov 14 15:37:55 even with INHIBIT_DEFAULT_DEPS = "1" before inherit base Nov 14 15:39:55 hrw|work: This is a problem with -e, it won't see git-native Nov 14 15:40:07 ok Nov 14 15:40:13 hrw|work: bitbake -e | grep.... will give the same result Nov 14 15:40:23 RP: started -n now (with clean cache) Nov 14 15:40:23 try bitbake -b git-native -e Nov 14 15:41:18 hi Nov 14 15:41:19 hi CoreDump|home Nov 14 15:41:23 hi CoreDump|home Nov 14 15:42:14 [hrw@misc1 celinux-test]$ bitbake -b ~/devel/oe/org.openembedded.dev/packages/git/git-native.bb -e|grep ^DEPENDS Nov 14 15:42:17 DEPENDS="quilt-native expat-native openssl-native curl-native" Nov 14 15:42:35 but bitbake -n git-native had whole toolchain.. Nov 14 15:42:53 was it not though the zlib issue? Nov 14 15:43:09 btw, bitbake -b git-native.bb will work Nov 14 15:43:22 RP: zlib was noticied Nov 14 15:43:47 zlib would pull in the whole toolchain Nov 14 15:44:40 curl-native is fscked Nov 14 15:46:22 will push fix: curl-native +DEPENDS = "zlib-native" Nov 14 15:46:53 and inhibit default deps in native.bblcass? Nov 14 15:47:06 that one will test Nov 14 15:47:40 native.bbclass doesn't need it as it also gets HOST_SYS != BUILD_SYS and they will for native builds Nov 14 15:48:34 which moron designs all these AC adaptors? Nov 14 15:48:53 koen: some guy in .zh Nov 14 15:49:18 I can't use extension cords because for n chargers I need 2n sockets Nov 14 15:49:39 * RP suggests UK plugs Nov 14 15:50:25 * koen wishes for more usb chargable devices Nov 14 15:50:55 * koen is working on his native cluster Nov 14 15:53:41 ERROR: '/home/hrw/devel/oe/org.openembedded.dev/packages/git/git-native.bb, do_populate_staging' failed Nov 14 15:53:48 | NOTE: make -e MAKEFLAGS= install bindir=/a/home/hrw/devel/build/celinux-test/tmp/staging/i686-linux/bin template_dir=/a/home/hrw/devel/build/celinux-test/tmp/staging/i686-linux/share/git-core/templates/ GIT_PYTHON_DIR=/a/home/hrw/devel/build/celinux-test/tmp/staging/i686-linux/share/git-core/python Nov 14 15:53:54 | make: *** No rule to make target `install'. Stop. Nov 14 15:54:10 :( Nov 14 16:06:20 RP: UK plugs can hold whole servers Nov 14 16:08:44 * XorA still wants some of those computers in a backplug boards Nov 14 16:10:29 CIA-4: ping? Nov 14 16:10:39 RP: time to restart fetchall Nov 14 16:12:43 03hrw 07org.oe.dev * r2f05e4ae... 10/ (3 files in 2 dirs): curl-native: DEPEND on zlib-native not on zlib Nov 14 16:12:48 03hrw 07org.oe.dev * rb36008d6... 10/ (1 classes/native.bbclass): native.bbclass: set INHIBIT_DEFAULT_DEPS - native packages does not need cross toolchain which is added by base.bbclass Nov 14 16:13:51 hrw|work: native.bbclass doesn't need that, as I said earlier :-/ Nov 14 16:14:49 14 16:59 < RP> hrw|work: native should set INHIBIT_DEFAULT_DEPS (see base_dep_prepend in base.bbclass) Nov 14 16:15:46 no-one started a jackpc linux yet :-( Nov 14 16:16:10 hrw|work: and then [16:10:24] native.bbclass doesn't need it as it also gets HOST_SYS != BUILD_SYS and they will for native builds Nov 14 16:16:31 ops. missed that one Nov 14 16:16:39 admittedly that doesn't entirely make sense :-/ Nov 14 16:16:57 can you revert my change? Nov 14 16:17:46 your change won't actually hurt anything, it just isn't needed Nov 14 16:18:41 oh well Im off on holidays, see you guys in a weeks time Nov 14 16:18:51 XorA: Enjoy :) Nov 14 16:18:52 cu XorA|gone Nov 14 16:18:59 XorA|gone: have a nice time Nov 14 16:19:09 * XorA|gone is going to London Nov 14 16:19:28 XorA|gone: Say hello to mallum for me :) Nov 14 16:19:37 ah. so london != having a nice time. have to remember ;D Nov 14 16:19:41 RP: I'm making good progress. Tomorrow you'll get your ncurses demo Nov 14 16:19:53 mickey|py-ncurse: Sounds good, thanks! :) Nov 14 16:19:59 hrw|work: no will have nice time, just thought Id indicate my locale :-) Nov 14 16:20:02 np. sorry for the delay excuses ;) Nov 14 16:20:20 03rpurdie 07org.oe.dev * r74c6df52... 10/ (1 classes/native.bbclass): disapproval of revision 'b36008d6d508c1a3c7c580085c230913aebe4f87' Nov 14 16:21:54 03mickeyl 07org.oe.dev * rf3e744d2... 10/ (5 files in 4 dirs): Nov 14 16:21:54 add fstests, a benchmarking suite from o-hand Nov 14 16:21:54 bb-file based on poky, added a compile fix and packaging Nov 14 16:24:12 g'day folks Nov 14 16:24:26 hideously off-topic but I apologise as I can't find an answer elsewhere :( Nov 14 16:24:33 how do I check if a environment variable has been declared, in a makefile? Nov 14 16:24:52 hey mikearthur Nov 14 16:24:56 hey liam Nov 14 16:24:58 going alright? Nov 14 16:25:09 mikearthur: very busy Nov 14 16:25:15 sucks Nov 14 16:25:24 you should take on more staff ;) Nov 14 16:25:41 mikearthur: iirc there is a switch you can use in make to display variables etc Nov 14 16:26:17 basically I'm just want to do a if (VARIABLENAMETHATMAYORMAYNOTHAVEBEENDECLAREDINBASH) do blah Nov 14 16:27:04 if ["x$VAR" != "x"] then declared;else not declared;fi Nov 14 16:27:16 hrw|work: cheers Nov 14 16:43:44 cu Nov 14 16:57:59 hi to all! Nov 14 17:00:04 mickey|py-ncurse: fstests doesn't have a PV Nov 14 17:01:12 mickey|py-ncurse: could you add PV = "0.0+svn${SRCDATE}" ? Nov 14 17:01:31 dunno about their internal PV, that's why i left it out Nov 14 17:01:34 RP? Nov 14 17:02:20 Its in our svn and never released iirc so "0.0+svn${SRCDATE}" would be correct Nov 14 17:03:21 I think tf wrote that .bb and he's still learning :) Nov 14 17:03:43 mickey|py-ncurse: isn't having a sane PV OE policy? Nov 14 17:04:01 mickey|py-ncurse: the default "1.0" is misleading since you fetch from svb Nov 14 17:04:07 sure sure Nov 14 17:04:25 you could add a sane-srcdate for it :) Nov 14 17:06:02 on my way Nov 14 17:06:48 You can see why I put off merging things :} Nov 14 17:06:54 hehe Nov 14 17:07:45 RP: please check my compile-fix, dunno whether it's proper, but i needed to add more libs to make it link Nov 14 17:07:55 03mickeyl 07org.oe.dev * re4fce641... 10/ (3 files in 3 dirs): fstests: add sane-srcdate and add proper PV Nov 14 17:09:38 mickey|py-ncurse: At a quick look, why did it need to be added to anything other than the pango tests? Nov 14 17:10:40 Can anyone teach me how to enable bvvd mode on openzaurus? I´m using a c1000 with gpe-image... Nov 14 17:10:59 Samurai_San: With a 2.6 kernel? Nov 14 17:11:53 RP: yep. is it possible? Nov 14 17:12:07 Samurai_San: No, bvdd doesn't exist for 2.6 Nov 14 17:12:13 RP: ok. got it. Nov 14 17:12:32 overlays do exist, as well as qvga mode Nov 14 17:12:39 We do have overlay support via extra framebuffer devices but no apps to support them yet Nov 14 17:12:47 koen: it does? Nov 14 17:12:53 RP: Can i install gpe under cacko then? I´m really loving gpe stuff, but i need the bvvd Nov 14 17:13:09 CoreDump|home: sure, but as RP says, no apps support it yet Nov 14 17:13:26 CoreDump|home: although XorA|gone should have a patch for mplayer almost ready Nov 14 17:13:38 well, qvga VT / X switching would be really nice for video playback Nov 14 17:13:55 koen: that is excellent news! Nov 14 17:14:24 I sorted out qvga support a while back... Nov 14 17:14:35 koen: patch meaning bvvd support? Nov 14 17:14:41 guess I overlooked that =) Nov 14 17:14:49 no, since bvdd doesn't exist in 2.6 Nov 14 17:14:51 I'll check it out this week Nov 14 17:14:56 a patch for using overlays Nov 14 17:14:56 ok Nov 14 17:15:12 CoreDump|home: and sirfred has an mplayer patch to use libw100 on c7x0 Nov 14 17:15:38 pffft =) screw c7x0, long live cxx00 =D Nov 14 17:15:57 hehehe Nov 14 17:16:13 (I thought mplayer had some sort of w100 accel for some time now) Nov 14 17:16:14 RP: I've been looking at the pdaXrom cpufreq patch, Nov 14 17:16:31 (for pxa270) Nov 14 17:16:50 raduga: Is it any good? Nov 14 17:16:51 it appears to build fine, in OZ 2.6.18 kernels Nov 14 17:17:00 RP: haven't used it extensively, but it appears to be working Nov 14 17:17:03 * CoreDump|home played to much w/ Collie. Nov 14 17:17:12 s/Collie/Poodle Nov 14 17:17:27 raduga: Can you point me at it? Nov 14 17:17:39 RP: at the moment, i'm running pdaXrom again. when I go back to OE, i'll do some more testing, and if it still looks nice, maybe submit it to the bugtracker Nov 14 17:17:39 ok, Nov 14 17:17:42 just a moment Nov 14 17:17:46 I don't trust the pxa25x cpufreq patch, let along the 27x ones... Nov 14 17:17:53 heh :) Nov 14 17:18:17 * CoreDump|home hopes for some useable underclocking support =) Nov 14 17:18:29 useable is the key... Nov 14 17:18:52 indeed Nov 14 17:18:53 coredump: seems to underclock ok. I had some problems with overclocking, but evidently I was using the wrong parameters Nov 14 17:19:17 CoreDump|home: it had w100 support, but sirfred is adding better support :) Nov 14 17:19:32 koen: =) lucky c7x0 users Nov 14 17:19:32 (switching to pdaXrom, the behavior was identical; using appropriate values for CCCR should help some) Nov 14 17:20:49 raduga: If you have info on it, please do document it somewhere and let me know where. I do plan to look at cpufreq at some point Nov 14 17:21:05 rp: just a moment Nov 14 17:23:08 I will document later, what I've found, but the patch itself is: Nov 14 17:23:10 https://mail.pdaxrom.org/svn/pdaXrom-builder/trunk/patches-local/linux-2.6.18/armv5tel/328_2.6.18-pxa27x-power.patch Nov 14 17:23:58 (the actual patch I applied was from the pdaxrom builder ISO, and is a bit older, but I think has the same meat) Nov 14 17:26:36 hey pH5(_) Nov 14 17:27:04 also, there's a userspace tool for adjusting the CCCR registers directly Nov 14 17:27:07 raduga: ok, thanks. I've stored for future reference :) Nov 14 17:27:08 https://mail.pdaxrom.org/svn/pdaXrom-builder/trunk/rules-ipk/dvfm.make Nov 14 17:27:24 We're not touching dvfm ;-) Nov 14 17:27:30 ok :) Nov 14 17:28:10 djee` Nov 14 17:28:11 z Nov 14 17:28:20 who said ptxwas easer to use? Nov 14 17:28:51 rp: fiddling randomly with the register values, it appears some combinations "work" and others don't. I'm not enough familiar with the CPU's internal architecture to understand the difference :) Nov 14 17:28:59 that would be a 4 lines recipe Nov 14 17:29:37 raduga: That doesn't surpirse me... Nov 14 17:31:35 i think, leaving the l_value at 16, and just adjusting the 2n_value, is safe Nov 14 17:32:07 but, ehhh. you would be able to make a better call than I would ;) Nov 14 17:32:51 s/you/anyone else on the planet/ Nov 14 17:33:42 btw, QVGA is working fine, on oz/akita :) Nov 14 17:33:47 hey koen Nov 14 17:34:10 pH5: did you see the waitpid bug with dbus? Nov 14 17:35:40 xrandr doesn't appear to help much yet, but i've made a script that restarts X, and updates the pointercal, so swapping is nearly painless Nov 14 17:35:59 koen: no, but I didn't spend much time with the gadgets, lately. Nov 14 17:36:02 * pH5 looks at #1567 Nov 14 17:37:29 raduga: how did you do it???? Nov 14 17:37:49 pH5: it works, except inside gpe-dm starting gpe-login starting Xsession Nov 14 17:37:58 samurai_san: what platform are you running on? Nov 14 17:38:13 raduga: oz/gpe on akita Nov 14 17:38:26 openzaurus-unstable .dev? Nov 14 17:38:37 or a stable release? Nov 14 17:38:43 stable Nov 14 17:39:23 if you're using 3.5.4.1 i dont think (iirc) it has support yet Nov 14 17:39:58 this is the one i´m using... which version do u recommend? Nov 14 17:40:03 hrw posted an experimental build with overlay/qvga patch, some time ago Nov 14 17:40:31 could u tell me where do i get it? Nov 14 17:40:38 samurai_san: difficult to recommend. If you want to see bleeding edge features and bleeding edge bugs (and if you want to get bloody) use the full OE build system, and roll your own Nov 14 17:41:20 if that sort of thing doesn't sound like fun, you may want to stick with the release packages, and hope/wait for someone to post a newer build. Like hrw. Nov 14 17:41:32 (let me see if ic an find the one referred to) Nov 14 17:41:36 i´m a bloody guy... it´s my third day with akita and i´ve tried even openbsd on it Nov 14 17:41:51 ok then.. i´ll be waiting Nov 14 17:42:13 http://www.openembedded.org/wiki/GettingStarted Nov 14 17:42:35 (the bloody way) Nov 14 17:42:54 raduga: I take it the patches are in the .oz354x branch? Nov 14 17:43:58 now i´m toasted... won´t sleep tonight... Nov 14 17:49:34 coredump: i'm sorry. I remembered someone (thought it was hrw, maybe not) made a build of oz/gpe with overlay/qvga and posted about it Nov 14 17:49:52 raduga: np, I'll ask him about it ;) Nov 14 17:50:02 coredump: I even tried, and used it. :/ but can't seem to remember who, or where the images went. Nov 14 17:50:37 not sure if its in the .oz354x branch, but I suspect not (yet) Nov 14 17:51:02 I know this is really offtopic, but does anyone here has experience with DirectFB? I managed to cross compile it but can't get it going on my hardware.. so any ideas are welcome :) Nov 14 17:51:25 coredump: however, they *are* in the org.openembedded.dev branch Nov 14 17:51:33 and do apparently work :) Nov 14 17:52:04 =) Nov 14 17:56:55 Jin^eLD, whats not working with directfb? I've been using it a lot lately.. Nov 14 17:59:35 Gerrath: can not run anything from the directfb-examples, the errors range from Sig 11 to something related to various functions that the particular demo wants to use Nov 14 17:59:52 I compiled the library with debug output now but still can't figure out what exactly is going wrong Nov 14 18:08:16 03koen 07org.oe.dev * r6a679e7d... 10/ (1 packages/meta/meta-toolchain.bb): meta-toolchain.bb: remove hardcoded references Nov 14 18:22:13 03koen 07org.oe.dev * r0522ce6e... 10/ (1 packages/gcc/gcc4-build-sdk.inc): gcc4-build-sdk.inc: remove gcc3 patch Nov 14 18:24:54 hi Nov 14 18:25:00 CoreDump|home: it is in .oz354x iirc Nov 14 18:25:01 hi hrw :) Nov 14 18:25:30 CoreDump|home: ${RPSRC}/pxa27x_overlay-r2.patch;patch=1 \ Nov 14 18:25:34 file://pxafb_changeres-r0.patch;patch=1 \ Nov 14 18:25:43 hrw: nice! Nov 14 18:25:51 CoreDump|home: want w100 device? my c760 is not used... Nov 14 18:26:23 CoreDump|home: I can donate it to OE as projectdevice and send it to you Nov 14 18:26:31 nah, thanks. I'm barely using all of the 3 PDAs I already have Nov 14 18:26:49 hrw: thanks for the offer tho =) Nov 14 18:27:00 CoreDump|home: I have 4 pda on desk and webpad Nov 14 18:27:07 hehe Nov 14 18:27:22 and another 2 pda (palmos old ones) in box Nov 14 18:27:22 * koen has 0 pda's on his desk Nov 14 18:27:26 how do I do ifeq ($ARCH,x86_64 OR powerpc) in a Makefile? Nov 14 18:27:34 koen: you have them in 19" rack Nov 14 18:27:45 hehe Nov 14 18:27:50 ipaq cluster ftw Nov 14 18:27:51 almost :) Nov 14 18:28:16 * hvontres|poodle imagines trying to put a 19" rack in pocket.... Nov 14 18:28:27 hvontres|poodle: cargo pockets :) Nov 14 18:29:40 koen: Do you know of any issues using monotone 0.31? Nov 14 18:30:08 hvontres|poodle: it's a bugfix release, so you should see less issues :) Nov 14 18:30:21 mikearthur: Nov 14 18:30:27 arch=x86_64 Nov 14 18:30:27 foo=x86_64 powerpc Nov 14 18:30:27 ifneq ($(filter $(arch),$(foo)),) Nov 14 18:30:27 $(warning arch is in foo) Nov 14 18:30:30 endif Nov 14 18:30:39 koen: cool...yum wanted me to upgrase , but I thought I'd check first :) Nov 14 18:30:42 kergoth, thanks Nov 14 18:31:00 kergoth: question I have about touchscreen support - have a minute? Nov 14 18:31:05 the gnu make online documentation is actually quite good, its where i normally check on such things Nov 14 18:31:09 hrw: sure Nov 14 18:31:58 hey kergoth Nov 14 18:32:08 kergoth: I have progear hx1050+ webpad which use MT510 touchscreen connected to RS232. Under Debian it use mutouch X11 driver, how much it would be adding it into tslib? Nov 14 18:32:26 re: ipaq cluster Nov 14 18:32:37 kergoth: or should I rather write/check kernel touchscreen support for it and use it as /dev/input/ device? Nov 14 18:32:43 how them skiffs doin? :) Nov 14 18:33:20 heh.. there is kernel driver already:D Nov 14 18:33:40 but for mk712 Nov 14 18:35:55 kergoth: what would you suggest? Nov 14 18:36:24 Has anybody tried messing with the open-source sun java stuff in OE yet? Nov 14 18:36:58 hvontres|poodle: javac needed javac to compile, so I gave up Nov 14 18:37:12 hvontres|poodle: probably needs a proper classpath first Nov 14 18:37:16 ~lart circular dependacies Nov 14 18:37:18 * ibot wallops circular dependacies with a main rotation server that needs rehubbing. It won't take long Nov 14 18:38:46 * hvontres|poodle wonders if java programming is as cryptic as the sun website Nov 14 18:41:26 java.lang.cryptic.programming.start.new() Nov 14 18:41:46 koen: I'm just glad I found python...:) Nov 14 18:45:37 has anybody here played with kaffe much? I got kaffe-qt to build, but it hangs on Loading java/lang/IllegalThreadStateException.class(/usr/lib/kaffe-qt/jre/lib/rt.jar) [compressed] even on HelloWorld :( Nov 14 19:06:56 * hrw from progear Nov 14 19:07:04 hey hrw Nov 14 19:07:22 640x480 on 1024x768 lcd suxx Nov 14 19:09:44 hm. need to compile x86_64 -> i386 toolchain Nov 14 19:24:55 wb Crofton zecke Nov 14 19:27:38 thanks Nov 14 19:27:58 hey zecke Nov 14 19:30:08 zecke, I had a couple of ifles in the list you sent to the list a few days back. I'll try and work out the problems over the nexxt week Nov 14 19:30:18 I am at a conference this week Nov 14 19:30:59 its good that ewi is 32bit sometimes Nov 14 19:34:18 Crofton: thanks, it is mostly using '"' Nov 14 19:34:35 yeah Nov 14 19:34:39 and soe tabs I think Nov 14 19:34:53 yeah Nov 14 19:35:00 and '}' being intented Nov 14 19:35:28 I need to get this tie off Nov 14 19:35:39 re Nov 14 19:35:55 it is cutting off blood to my brain Nov 14 19:38:26 hmmm, how can I dump / print all symbols of a font? Nov 14 19:39:01 xfontview? Nov 14 19:39:11 I last did that some years ago Nov 14 19:39:21 when 2.0.28 was a brand new kernel Nov 14 19:39:29 error building diet-X11: "/bin/sh: ../src/util/makekeys: cannot execute binary file" Nov 14 19:39:31 any ideas? Nov 14 19:39:44 hey mreimer Nov 14 19:39:54 hey koen. Nov 14 19:40:00 koen|awa1: keeping busy? Nov 14 19:40:18 yes, the new term started this week Nov 14 19:40:42 koen: ah, so no time for hacking? or can you get credit for hacking? Nov 14 19:41:49 atm copious time for hacking, while waiting for pdflatex and matlab :) Nov 14 19:42:05 great :-) Nov 14 19:47:49 koen: thanks Nov 14 19:55:05 03koen 07org.oe.dev * r3019a41b... 10/ (3 files in 3 dirs): libmimedir: add a maxdate for the gslist patch and a sane-srcdate to work around some weirdness in bitbake trunk Nov 14 19:55:49 koen: what weirdness? Nov 14 19:56:04 time to build kernel for progear. Nov 14 19:56:50 RP: Did liams alsa fixes for volume ever get released? Nov 14 19:57:10 hvontres|poodle: it is in testing iirc Nov 14 19:57:22 hvontres|poodle: yes, although I might not have updated the kernel yet Nov 14 19:57:26 I got one in mailbox even. but no time to see at it Nov 14 19:57:33 * RP is totally lost off... Nov 14 19:58:34 hrw: where are the testing fixes kept? Nov 14 19:58:41 RP: I suspect that SRCDATE inside a recipe doesn't work Nov 14 19:58:58 RP: but it could be that it fetched during your rewrite Nov 14 20:01:27 hvontres|poodle: somewhere on lrg disk Nov 14 20:02:06 RP: looks like we can create linux-openzaurus-untested which will contain new patches for users to test Nov 14 20:02:10 ;D Nov 14 20:02:31 hrw: or in a sheeps stomach...(thanks koen) :) Nov 14 20:02:38 * chouimat goes back to his wrtsl54gs oe work Nov 14 20:03:03 chouimat: OE-WRT? Nov 14 20:03:11 hvontres|poodle: I bet lrg makes me eat some haggis if I visit scotland as payback Nov 14 20:03:12 mostly ... Nov 14 20:03:36 koen: hmmmm, fikandel vs haggis..... Nov 14 20:03:40 chouimat: if you will get something working which will take up to 6M flash (and work without serial cable) then I can test probably Nov 14 20:03:42 hrw: tired of freewrt/openwrt/dd-wrt buildsystem Nov 14 20:04:08 chouimat: I'm tired of lack of openwrt upgrades Nov 14 20:04:26 hrw: may take sometimes ... still trying to "relearn" OE ... Nov 14 20:05:04 shouldn't be too hard to make something small with task-base Nov 14 20:05:06 chouimat: OE can build openwrt compatible packages Nov 14 20:05:38 koen: small like small.. running and working 2.4.30 kernel is other thing probably... need to triple check openwrt/freewrt/dd-wrt kernel Nov 14 20:05:39 hrw: I know ... currently I'm pissed off by the openwrt guys "attitude" Nov 14 20:05:57 hrw: 2.4.32 iirc Nov 14 20:06:08 I do not even try to follow their development Nov 14 20:07:57 hrw: I asked question on the forums and mailing list and I got if you can understand buildroot makefiles ... you're not a real developer etc etc Nov 14 20:07:57 s/can/can't Nov 14 20:07:57 I ordered something in the dd-wrt webshop two weeks ago Nov 14 20:07:57 the order is still 'pending' Nov 14 20:08:18 chouimat: openwrt guys work on buildroot-ng for months... Nov 14 20:08:24 buildroot-ng is not a big improvement ... Nov 14 20:08:27 brb. rebooting progear into 2.6.19-rc5 Nov 14 20:13:17 koen: I did have some issues with SRCDATEs at one point but they should be fixed... Nov 14 20:13:53 RP: right Nov 14 20:14:17 I couldn't reproduce it reliably (&*#&$#*& cvs), so I just added these extra safeguards Nov 14 20:15:44 re Nov 14 20:16:49 hi hrw Nov 14 20:31:38 Jin^eLD, did you try stracing it? Nov 14 20:32:17 hi florian Nov 14 20:32:18 hi zecke Nov 14 20:32:38 hi pb_ Nov 14 20:32:46 hi rp Nov 14 20:32:46 hi pb_ Nov 14 20:32:48 hi mreimer Nov 14 20:35:52 Gerrath: no, I will have to compile strace for the platform; so far I tried enabling debug output of the directfb library Nov 14 20:36:16 Gerrath: I am no longer at work :) but I will try that tomorrow, thanks for the hint Nov 14 20:36:16 Jin^eLD, I found strace very helpful Nov 14 20:36:42 Jin^eLD, I will try to remember issues I had when working on directfb.. Nov 14 20:37:29 evening Nov 14 20:37:49 Gerrath: thanks... the main problem is that the dfb log output is very cryptic Nov 14 20:37:50 hi greentux Nov 14 20:37:57 but strace is indeed a good start Nov 14 20:38:40 just added the 07 fosdme dates to our groupware... dont forget :) Nov 14 20:39:54 RP: was it this year also at weekend? Nov 14 20:40:14 re Nov 14 20:40:20 hey pb_ Nov 14 20:40:39 greentux: I think so Nov 14 20:40:53 RP: mmmh long time. ok Nov 14 20:41:47 someone know which FB driver suppors Silicon Motion SM710? Nov 14 20:42:11 hrw: do you plan to go to next year fosdem? Nov 14 20:42:25 greentux: yes Nov 14 20:42:36 hrw: fine Nov 14 20:43:26 argh.. Nov 14 20:43:48 I have 1024x768 touchscreen lcd but no framebuffer support for this gfx Nov 14 20:44:49 hrw: which driver supports the touch device? Nov 14 20:45:03 mutouch in X11 Nov 14 20:45:17 greentux: its microtouch mt510 Nov 14 20:45:18 greentux: i have also a touchscreen device, supportet by evdev (evtouch). but no calibration... Nov 14 20:45:29 connected via usb Nov 14 20:45:38 greentux: tried tslib? Nov 14 20:45:58 does not support that .. Nov 14 20:46:11 ists by "gunze" Nov 14 20:46:18 s/ists/its Nov 14 20:46:20 mutouch has hardcoded values in config Nov 14 20:46:32 hrw: not sure... even the 510 seems to be quite experimantal Nov 14 20:47:18 brb Nov 14 20:47:28 any c++ programmers here? Why doesn't it work when i just put using namespace std; in my code? i wanted to use the cpp functions in etc. for file input Nov 14 20:49:07 #include int main(void) { std::cout << "hello world" << std::endl; return 0;} Nov 14 20:49:11 should works Nov 14 20:49:22 03rpurdie * r673 10bitbake/lib/bb/ (cache.py parse/__init__.py): cache.py: Share the parser's mtime_cache, reducing the number of stat syscalls Nov 14 20:50:02 hrw, i just suspect i dont have this stl library Nov 14 20:51:03 TheCan: if you put using namestatce *; in a header I will... Nov 14 20:51:15 TheCan: apt-get install g++ maybe? Nov 14 20:51:18 03rpurdie * r674 10bitbake/lib/bb/taskdata.py: tastdata.py: Minor speedup Nov 14 20:51:21 greentux: 'gunze' has tslib support, ask RP or mallum Nov 14 20:51:26 greentux: sony ux50? Nov 14 20:51:31 i have g++ already installed Nov 14 20:51:41 XorA|gone: I tried the latest gtk+ 2.10.6 bb but the calendar widget still doesn't work. Any ideas? Nov 14 20:52:00 TheCan: I just checked that elloworld - it works here Nov 14 20:54:18 koen, are you using gtk+ 2.10.6? Nov 14 20:54:41 mreimer: yes Nov 14 20:55:01 hrw, ah i think i figured out the problem - looks like the file needs to end in .cpp for it to work Nov 14 20:55:14 TheCan: or .cc or you have to use g++ Nov 14 20:55:15 koen: does the calendar widget work for you? (not gpe-calendar) Nov 14 20:55:33 hrw, i am using g++ but still problems somehow Nov 14 20:56:18 it pops up, but is empty Nov 14 20:56:22 koen: same here Nov 14 20:56:42 koen: thanks for testing Nov 14 20:57:31 koen: sorry child wanted to drink ;) Nov 14 20:57:38 koen: its a sony ux90 Nov 14 20:58:10 RP: ok asking.... rp do you have experience with gunze usb touchscreen? Nov 14 20:59:14 mreimer: http://www.openembedded.org/~koen/broken-calendar-widget.png Nov 14 20:59:29 koen: yep, that's exactly what I see Nov 14 20:59:31 greentux: I seem to remember something about it only providing relative coordinates, not absolute ones which made it a mouse device rather than a touchscreen from a software PoV... Nov 14 20:59:35 someone remember how to make xterm reversed? Nov 14 20:59:36 greentux: But I might have the wrong device... Nov 14 21:00:21 RP: with evtouch i saw absolute coordinates... 0 - 2000 x/y Nov 14 21:00:46 RP: but evtouch is not very stable. Nov 14 21:01:00 greentux: I probably have the wrong device then :) Nov 14 21:01:14 hrw: ctl-middle-click, "Enable Reverse Video" Nov 14 21:01:24 mreimer: I have one button only Nov 14 21:01:26 mreimer: http://rafb.net/paste/results/ELNKFc32.html Nov 14 21:01:34 mreimer: XGA touchscreen Nov 14 21:01:47 mreimer: those are the accompanying error messages Nov 14 21:02:06 ~lart Xdefaults Nov 14 21:02:06 * ibot pushes the wall down onto Xdefaults whilst whistling innocently Nov 14 21:02:14 hrw: .Xdefaults: XTerm.VT100.background and XTerm.VT100.foreground Nov 14 21:02:21 thx Nov 14 21:02:56 koen: those show up at the moment the calendar widget is draw? Nov 14 21:03:06 s/draw/drawn/? Nov 14 21:03:10 mreimer: yes Nov 14 21:03:15 not messages before that Nov 14 21:03:31 s/not/no/ Nov 14 21:04:06 mreimer: libgtkinput also works now :) Nov 14 21:04:18 koen: good Nov 14 21:04:55 koen: the one thing that bothers me about libgtkinput is that it shuffles the screen around so much when matchbox-keyboard pops up Nov 14 21:05:13 koen: hmm, maybe a translucent, moveable matchbox-keyboard would solve that Nov 14 21:05:13 now only need to get Alt working in xterm->ssh->ssh->screen Nov 14 21:05:20 mreimer: right Nov 14 21:05:36 I want matchbox-keyboard in debian... Nov 14 21:09:34 112M ram hurts Nov 14 21:11:19 mreimer: wanna file a bug for that in the oe bugtracker? Nov 14 21:11:38 koen: ok Nov 14 21:12:02 mreimer: did you see http://bugs.openembedded.org/show_bug.cgi?id=1569 ? Nov 14 21:12:07 Lo Nov 14 21:12:16 lo gerwinin Nov 14 21:12:22 hey gerwinin Nov 14 21:12:28 hey Koen Nov 14 21:13:06 It seems my bitbake is ignoring my prefered version setting for glibc Nov 14 21:13:43 With glibc 2.4 I am getting a tls support error Nov 14 21:14:58 on arm? Nov 14 21:15:08 no on x86 Nov 14 21:15:31 cu Nov 14 21:15:42 have a good night Nov 14 21:15:44 or day Nov 14 21:15:57 good night hrw Nov 14 21:16:09 gn8 hrw|gone Nov 14 21:16:51 koen: I'll take a look at it when I get off the phone Nov 14 21:17:22 mreimer: thanks Nov 14 21:18:35 if i got a problem with `bitbake gpe-image` cause one tool/library don't compile better ask here on on gpe channel ? Nov 14 21:24:02 03koen 07org.oe.dev * rfe5436e7... 10/ (1 MAINTAINERS): MAINTAINERS: add lrg Nov 14 21:28:48 Hmm, for me setting glibc-intermediate to 2.4 still pulls 2.5 Nov 14 21:30:31 Kristoffer I am working on a similar problem :( Nov 14 21:30:45 But with it pulls glibc-inital-2.4 Nov 14 21:31:33 You've set proper glibc-inital in distro file or conf? Nov 14 21:33:00 in conf Nov 14 21:35:41 I did it in the distro conf file Nov 14 21:37:47 koen: it's the pangoxft2.10.6.diff patch Nov 14 21:38:24 ah the make-gtk-not-mindnumbingly-slow.patch Nov 14 21:41:39 mreimer: a missing "GdkGC *gc;" somewhere? Nov 14 21:50:17 florian, mreimer, RP: http://mail.gnome.org/archives/performance-list/2006-November/msg00004.html Nov 14 21:50:51 thanks koen Nov 14 21:51:48 koen: oh, very good Nov 14 21:55:13 koen: It'd good to get any issues with that patch resolved :) Nov 14 21:55:15 * koen waits for the fix to magically appear Nov 14 21:56:06 * mreimer is eagerly waiting for cairo 1.3* Nov 14 21:59:15 Does anyone have any objections to me checking in the site changes? If so speak now... :) Nov 14 21:59:23 now Nov 14 21:59:27 * koen runs Nov 14 21:59:36 RP: no, please check them in Nov 14 21:59:45 koen: That would have been speak "now" ;-) Nov 14 22:00:09 RP: no, let us break things Nov 14 22:00:25 RP: I think I will battle with autotools then Nov 14 22:00:29 koen: The site arm eabi changes you checked in recently - were they eabi specific? Nov 14 22:01:18 I copied them from the i586 file Nov 14 22:01:57 so, no they weren't arm or eabi specific Nov 14 22:02:47 ok, I'll duplicate for now, pending the next round of cleanups... Nov 14 22:06:50 re Nov 14 22:07:25 hrw|gone: wb Nov 14 22:07:26 * RP kicks CIA-4 Nov 14 22:07:26 ow Nov 14 22:08:11 its committed... Nov 14 22:09:22 * RP feels better with that raft of changes out his local tree Nov 14 22:09:47 03rpurdie 07org.oe.dev * r35628b6b... 10/ (5 files in 2 dirs): git: Set PV correctly, update for upstream changes in directory names Nov 14 22:09:55 03rpurdie 07org.oe.dev * r376cbb96... 10/ (28 files in 4 dirs): Nov 14 22:09:55 site infrastructure changes: Allow more than one file per target so common files Nov 14 22:09:55 can be created. Add a new class to handle this. Based on the work of Jamie Nov 14 22:09:55 Lenehan, with changes from me. This commit creates a common x86 file and the arm Nov 14 22:09:55 configs are merged but much work still remains. Nov 14 22:11:41 RP: fetchall build still works Nov 14 22:12:13 hrw: great :) Nov 14 22:12:37 RP: svn fetcher with SSL is a problem Nov 14 22:12:49 svn: PROPFIND of '/repos/ossie/ossie/trunk/ossie': Server certificate verification failed: issuer is not trusted (https://ossie-dev.mprg.org) Nov 14 22:13:00 ERROR: Build of /home/hrw/devel/oe/org.openembedded.dev/packages/ossie/ossiecf_svn.bb do_fetch failed Nov 14 22:13:15 hrw: Can we pass options to svn to quieten that? Nov 14 22:13:43 hrw: I fixed git-native btw Nov 14 22:13:46 will look into it Nov 14 22:13:53 RP: refixed? Nov 14 22:13:54 --trust-me Nov 14 22:14:22 hrw: git in bitbake was broken, but so was git.bb Nov 14 22:14:23 raduga: ? Nov 14 22:14:29 ah Nov 14 22:14:30 hrw: sorry Nov 14 22:14:33 hrw: SSL propblem == invalid certificate Nov 14 22:14:54 zecke: sure Nov 14 22:15:03 hrw: do not use TLS when you don't want security Nov 14 22:15:09 e.g. http vs. https Nov 14 22:15:12 wget has an option for that iirc Nov 14 22:15:15 zecke: thats what I wanted to say Nov 14 22:15:26 hrw: that is a question of the SRC_URI Nov 14 22:16:07 RP: did you land your changes yet? Nov 14 22:16:17 zecke: yes Nov 14 22:16:33 zecke: should I reset the database yet? Nov 14 22:16:34 15 recipes use https for svn Nov 14 22:16:46 one for wget Nov 14 22:17:23 RP: fetchall stops on https svn Nov 14 22:17:30 koen: not yet, didn't have any time to continue on this stuff... Nov 14 22:17:37 koen: I need a padawan :) Nov 14 22:17:50 RP: by stops I mean 'looks like no other tasks are run' Nov 14 22:17:52 hrw: I think the -k option is broken in runqueue somehow :-/ Nov 14 22:18:10 RP: probably. I set 8 threads Nov 14 22:19:48 'The OpenSSH server has been ported to Windows CE' Nov 14 22:19:57 what for? ;) Nov 14 22:21:00 NOTE: package mnci-ramses-2.4.21-rmk2-pxa1-r5: task do_fetch: failed Nov 14 22:21:14 schurig: you still use it or can it be dropped? Nov 14 22:21:15 no COMPATIBLE_MACHINE? Nov 14 22:22:58 koen: right Nov 14 22:23:27 NOTE: package libtool-cross-1.5.10-r4: task do_compile: started Nov 14 22:23:34 RP: again something fscked? Nov 14 22:24:08 fetchall started to build ncurses, bluez-utils... Nov 14 22:24:23 [hrw@misc1 celinux-test]$ ls tmp/work/|wc 40 40 899 Nov 14 22:27:00 koen: http://pastebin.com/824540 fixes it Nov 14 22:28:21 hrw: That shouldn't happen :-( Nov 14 22:28:40 RP: I'm doing -cclean -k world now Nov 14 22:28:43 mreimer: could you commit that? Nov 14 22:29:05 mreimer: commit please Nov 14 22:29:07 koen: I'm going to append it to the pangoxft2 patch and will commit Nov 14 22:29:24 they forgot to initialize calendar->gc Nov 14 22:31:21 mreimer: thanks Nov 14 22:31:27 koen: np Nov 14 22:31:28 which worked with older gtk? Nov 14 22:32:53 heh Nov 14 22:33:08 mreimer: now the list has 2 copies :) Nov 14 22:33:11 hrw: they just forgot a part from the 2.6 Nov 14 22:33:14 koen: :-) Nov 14 22:34:52 koen: how do I make mtn ignore files? Nov 14 22:35:11 zecke: --ignore or a .mtnignore oorc Nov 14 22:35:15 zecke: or lua hooks Nov 14 22:35:49 [hrw@misc1 celinux-test]$ bitbake -cclean -k world; time bitbake -cfetchall world -k|tee fetchall.log Nov 14 22:35:58 zecke: sorry, --exclude Nov 14 22:36:34 koen: to which command? Nov 14 22:37:03 zecke: commit Nov 14 22:37:34 koen: oh well, I#m searching fome something like .cvsignore or svn propedit svn:ignore Nov 14 22:37:52 zecke: http://venge.net/monotone/monotone.html Nov 14 22:38:29 "mtn ls ignored pathname... Nov 14 22:38:29 This command lists all files in your workspace that monotone is intentionally ignoring, due to the results of the ignore_file (filename) hook." Nov 14 22:38:55 zecke: and you can put lua scripts in _MTN/ Nov 14 22:39:08 zecke: but njs can probably explain it better Nov 14 22:43:08 hmm I have messe dup my working copy Nov 14 22:44:06 Too many Matts on the performance list :} Nov 14 22:44:17 :) Nov 14 22:44:48 cu Nov 14 22:44:54 bed time Nov 14 22:45:28 koen: did you see this before:"NOTE: preferred version 2.5 of glibc not available"? Nov 14 22:46:01 florian: yes Nov 14 22:46:08 florian: Its usually harmless Nov 14 22:46:42 i started to play with angstrom to find out more about that decent new distribution that might be useful for some new devices Nov 14 22:46:56 * VoodooZ still has the same problem on slugos... Nov 14 22:47:07 RP: right... it even builds this one :-) Nov 14 22:47:31 florian: how did you fix that error? Nov 14 22:47:47 VoodooZ: i didn't... it just builds the correct one. Nov 14 22:47:54 florian: It prints that when its considering what to build for glibc-intermediate and at that point, it can't build glibc 2.5 so it is sort of correct... Nov 14 22:48:31 koen: rev 8bf9320e054936ed845e7a1c3835aa15ce27c3dd Nov 14 22:49:11 03mreimer 07org.oe.dev * rf1ff9986... 10/ (3 files in 3 dirs): sword and python-sword: upgrade to 1.5.9. Nov 14 22:49:22 03mreimer 07org.oe.dev * r8bf9320e... 10/ (1 packages/gtk+/gtk+-2.10.6/pangoxft2.10.6.diff): gtk+-2.10.6: Fix calendar widget rendering with the pangoxft2 patch. Nov 14 22:49:27 oops, didn't mean to commit that first one yet Nov 14 22:49:49 can't hurt to have someone looking after sword Nov 14 22:49:53 oh well, it works Nov 14 22:50:16 koen: v. 1.5.9 doesn't need patches for the swig bindings anymore, which is nice Nov 14 22:50:19 darn. mine still insists on building 2.3.5 Nov 14 22:50:25 mreimer: you forgot to bump PR on gtk+ Nov 14 22:50:33 doh Nov 14 22:50:57 koen: a question before I do: I see that cups is a dependency. Is that going to cause bloat for handhelds? Nov 14 22:51:43 I see your "bloat" and raise with "granular packaging" Nov 14 22:51:45 03koen 07org.oe.dev * r9568f6da... 10/ (1 packages/gtk+/gtk+_2.10.6.bb): gtk+ 2.10.6: bump PR Nov 14 22:51:48 mreimer: http://www.angstrom-distribution.org/repo/?action=details&pnm=gtk-printbackend-cups :) Nov 14 22:52:07 koen: very good! just wanted to make sure Nov 14 22:52:22 I'm out of practice Nov 14 22:52:33 printing from abiword works Nov 14 22:52:41 using cups autobrowsing Nov 14 22:52:46 which is kinda neat Nov 14 22:52:55 mostly pointless, but neat Nov 14 22:52:55 wow, cool! Nov 14 22:53:02 koen: so we are worse as ubuntu? we need to cripple cups :) Nov 14 22:53:23 if only we had a decent GUI mp3 player. It's surprising that we don't Nov 14 22:53:35 mreimer: xmms-embedded works quite good Nov 14 22:53:36 mreimer: too bad starling keeps crashing Nov 14 22:53:44 zecke: I'll check it out Nov 14 22:53:50 mreimer: sadly Qt2 :( Nov 14 22:53:58 zecke: bummer Nov 14 22:53:58 but besides that it works good :) Nov 14 22:54:15 grr: error building diet-X11 again: "/bin/sh: ../src/util/makekeys: cannot execute binary file" Nov 14 22:54:18 ideas? Nov 14 22:54:35 mreimer: clean and rebuilding it normally works... Nov 14 22:54:45 RP: thanks, I'll try that Nov 14 22:54:46 I keep meaning to find out why it does that... Nov 14 22:55:25 RP: maybe it fights with libX11, installing over each other's staging files? Nov 14 22:55:47 mreimer: I don't have diet-x11 and I see it... Nov 14 22:56:03 (with libX11 only) Nov 14 22:56:17 MACHINE = "mx31ads" Nov 14 22:56:18 TARGET_FPU = "hard" Nov 14 22:56:25 if only I had such toys.... Nov 14 22:56:48 I don't have libx11 and haven't seen it for a while Nov 14 22:57:18 I have seen it in the past Nov 14 22:59:43 RP: we only have results of 45 different apps in our site file :( Nov 14 23:00:02 zecke: yes :-( Nov 14 23:00:32 zecke: We should patch OE to autocollect results after builds... Nov 14 23:00:33 I'm sitting in front of autoconf now, at least to start Nov 14 23:02:58 RP: and have people execute tests on a target at well Nov 14 23:03:18 koen: That would be the next step Nov 14 23:04:19 RP: ideally we'd have a 'reporting server' for that Nov 14 23:04:35 that server can send notices it the results change Nov 14 23:05:20 mreimer: good work on fixing the calendar widget Nov 14 23:05:29 thanks florian Nov 14 23:05:32 s/it/if/ Nov 14 23:07:44 'night all Nov 14 23:08:02 good night koen Nov 14 23:08:02 mreimer: thanks again for fixing gtk+ Nov 14 23:08:02 koen|awa1: np Nov 14 23:11:41 03koen 07org.oe.dev * rcbaa08b3... 10/ (1 packages/linux/mx31ads-kernel_2.6.19rc5.bb): mx31ads-kernel: fix copy/paste error Nov 14 23:24:13 hmm Nov 14 23:24:33 the sdk crosscompiler hates me Nov 14 23:24:38 arm-angstrom-linux-gnueabi-strip: '/home/oe/build_qemu-arm/tmp/work/i686-angstrom-linux-gnueabi/gcc-cross-sdk-4.1.1-r0/image/usr/local/arm/oe/lib/libg2c.so.*': No such file Nov 14 23:24:44 :( Nov 14 23:25:41 it finally builds on the debian box... but now install fails Nov 14 23:33:53 ok.. that's a bug in gcc-package-sdk.inc Nov 14 23:38:08 pb_: master? Nov 14 23:50:17 good night Nov 14 23:50:33 good night Nov 14 23:52:49 03freyther 07org.oe.dev * r7cf3b400... 10/ (5 files in 3 dirs): Add site-conf a one stop to the utilized autoconf scripts Nov 14 23:52:55 03freyther 07org.oe.dev * rf3357ba2... 10/ (43 files in 3 dirs): Nov 14 23:52:55 Add empty and almost empty m4 files for packages we have test results from Nov 14 23:52:55 Start with the builtin.m4 which will generate test results for the Nov 14 23:52:55 default/builtin autoconf functions. Nov 14 23:52:55 The same pattern needs to be applied to every file... Nov 14 23:53:04 nite Nov 14 23:53:05 03freyther 07org.oe.dev * r71b00416... 10/ (5 files in 2 dirs): Nov 14 23:53:05 site-conf: Include builtin.m4 through aclocal.m4 and execute the defined function Nov 14 23:53:05 Document how to generate the configure script, document how to add a new Nov 14 23:53:05 package and do that for the builtin functions Nov 15 00:40:37 03mwester 07org.oe.dev * r3bebc771... 10/ (3 files in 3 dirs): Unslung: rootfs - fixed permissions on /root for ssh, add control flag for rc.bootdisk **** ENDING LOGGING AT Wed Nov 15 02:59:57 2006