**** BEGIN LOGGING AT Thu Oct 30 02:59:57 2008 Oct 30 03:34:28 hmm guys Oct 30 03:34:36 what do u think of disablign the ldconfig on boot? Oct 30 04:54:19 hoi hoi Oct 30 09:00:50 hi Oct 30 09:21:12 03Koen Kooi 07org.openembedded.dev * r6314775271 10openembedded.git/packages/xfce/ (exo/exo-no-tests.patch exo_0.3.4.bb): Oct 30 09:21:12 exo: fix build of python modules and disable running of tests at Oct 30 09:21:12 buildtime, my buildmachine can't run target code Oct 30 09:32:47 03Koen Kooi 07org.openembedded.dev * rbdec70c94c 10openembedded.git/packages/dsplink/ti-lpm-module_2.21.bb: ti-lpm-module: not using oe_runmake allows us to get rid of all the sed magic Oct 30 09:32:47 hi woglinde Oct 30 09:33:09 morning pb Oct 30 09:33:55 pb hm do you know if I can build om2008 image norw right of oe? Oct 30 09:34:14 or do I need the om git repo Oct 30 09:34:39 You can build fso-image out of OE and get a working binary, but I don't think om2008 is merged. Oct 30 09:34:55 hm okay Oct 30 09:35:00 even for fso-image I think there might be bits in the OM tree which are more uptodate than OE. I'm not exactly sure about that though, mickey|shower would be your resource. Oct 30 09:35:33 hm okay I need the qtopia stuff anyway Oct 30 09:35:38 okay Oct 30 09:35:49 probably best use the om tree then. Oct 30 09:35:57 I guess you could ask in #openmoko-cdevel, the h4x0rs in there should know Oct 30 09:37:04 03Koen Kooi 07org.openembedded.dev * r9f0a59964a 10openembedded.git/packages/dsplink/codec-engine_2.21.bb: codec-engine 2.21: apply fix for ti-lpm-module build Oct 30 09:41:45 h, Oct 30 09:41:47 hm Oct 30 09:43:22 ah Oct 30 09:43:23 now Oct 30 09:43:26 *g* Oct 30 09:44:32 heh Oct 30 09:44:36 woglinde: you aren't making a lot of sense Oct 30 09:45:18 pb yes yes I wanted to clone the om repo and missed a /git/ Oct 30 09:51:29 Is it possible to configure bitbake to run clean after each sucessfull build of bitbake file? Or are files in tmp/work needed for other builds? Oct 30 09:51:46 JaMa: see rm_work Oct 30 09:52:00 pb__: thanks Oct 30 10:17:28 florian_: good morning Oct 30 10:19:28 good morning Oct 30 10:20:22 hi florian Oct 30 10:30:31 morning all Oct 30 10:31:04 hi thesing Oct 30 10:32:54 03Koen Kooi 07org.openembedded.dev * r22e85416d9 10openembedded.git/packages/linux/ (2 files in 2 dirs): linux-omap git: add patch for fix scaling for the overlay Oct 30 10:35:17 morning oe devs Oct 30 10:35:24 i've got an issue with devshell not setting up the PATH environment variable properly Oct 30 10:35:31 args what are om doing there Oct 30 10:35:38 pulling all kernel Oct 30 10:35:40 s Oct 30 10:35:52 as git Oct 30 10:37:13 mattface can you explain in a better way what your problem is? Oct 30 10:37:40 yep, gimme sec. Oct 30 10:40:28 devshell is starting a new gnome-terminal in the source folder of the package im working with, thats perfect, but the command it is supposed to exec (bash --rcfile $TERMRCFILE) doesnt seem to do to add anything to the PATH Oct 30 10:40:38 incidentally $TERMRCFILE is empty Oct 30 10:41:16 whats devshell? Oct 30 10:41:37 03Koen Kooi 07org.openembedded.dev * r1320d90a7a 10openembedded.git/classes/package.bbclass: package bblass: fix ldconfig_postinst_fragment to not return an error if no /etc/ld.so.conf is present Oct 30 10:41:39 and how is it related to openembedded? Oct 30 10:41:42 oh dear :) Oct 30 10:42:00 it's a class in openembedded, right? Oct 30 10:42:31 hm okay I never used it Oct 30 10:42:41 kk Oct 30 10:43:12 and almost none of the devs here use it Oct 30 10:43:31 hmm Oct 30 10:44:42 it's kinda perfect for what I need Oct 30 10:45:58 mattface: I think mickey|shower is the man you need. Oct 30 10:46:05 let's hope he gets out of the shower soon, he's been in there for about 22 hours. Oct 30 10:46:32 pb *g* Oct 30 10:46:41 :) Oct 30 10:47:18 hm he is awake Oct 30 10:54:33 hey Oct 30 10:54:41 anyone have problems qith qemu builds of late? Oct 30 10:55:56 stefan was denn? Oct 30 10:56:14 ups Oct 30 10:56:39 03Koen Kooi 07org.openembedded.dev * r39430f1c3b 10openembedded.git/contrib/angstrom/build-feeds.sh: angstrom feed builder: add xf86-input-tslib Oct 30 11:11:04 03Koen Kooi 07org.openembedded.dev * rdb3b632021 10openembedded.git/packages/dsplink/ (3 files in 2 dirs): ti-cmemk-module, codec-engine: add patch to fix builds with >=2.6.26 and class_device_* API change Oct 30 11:17:42 hi rschuster Oct 30 11:18:40 hi florian Oct 30 11:39:30 hmm Oct 30 11:39:32 question Oct 30 11:39:34 how do i disable a .bb Oct 30 11:39:40 but keep it there in the tree Oct 30 11:39:52 basically the new qemu_svn packages dont compile - compiler errors Oct 30 11:40:00 (cant alloc registers) Oct 30 11:40:06 the old 9.1 works fine Oct 30 11:40:50 raster: you could use BBMASK Oct 30 11:41:17 i dont want the packages completley removed Oct 30 11:41:39 just want it to use qemu-native_0.9.1.bb & qemu_0.9.1.bb Oct 30 11:41:55 instead of qemu-native_svn.bb & qemu_svn.bb Oct 30 11:42:08 disabling in the svnrevs doesnt do that Oct 30 11:42:41 oe seems to "refer an _svn to a _0.9.1 Oct 30 11:43:05 either use BBMASK, like thesing said, or set PREFERRED_VERSION_qemu-native. Oct 30 11:47:08 hi, if I want to change the config parameters for a kernel build, what would be the best way ? Oct 30 11:48:57 hmmm how do i use BBMASK? Oct 30 11:49:33 no docs on it in the tree :( Oct 30 11:52:53 BBMASK = "(qemu-*_svn*)" Oct 30 11:52:54 ? Oct 30 11:54:02 raster, edit the .bb file and change the PREFERRED line Oct 30 11:55:39 there isnt one Oct 30 11:55:45 thats the thing Oct 30 11:55:54 this is a global oe problem Oct 30 11:56:07 every machine and distro is affected Oct 30 11:56:26 there isnt any specific qemu preferred version Oct 30 11:56:41 i can start adding it into every .inc file i can find Oct 30 11:56:45 but thats "wrong" Oct 30 11:58:47 or it just seems wrong Oct 30 11:59:16 hmm Oct 30 11:59:21 seems putting it in local.conf works Oct 30 11:59:25 its a bit better :) Oct 30 11:59:47 raster, google for openembedded user manual the read section 8.5 Oct 30 12:00:24 DEFAULT_PREFERENCE is probably what you want to use in the recipe (not PREFERRED as my memory told me) Oct 30 12:01:24 http://www.openembedded.info/user-manual/index.html Oct 30 12:01:29 hmm Oct 30 12:01:32 hope this is still actual Oct 30 12:01:35 doesnt seem to cover that there Oct 30 12:01:37 jupp Oct 30 12:02:21 seems same problem with uclibc-0.9.29 and uclibc_svn Oct 30 12:02:47 pdf is at http://oe.linuxtogo.org/~koen/usermanual.pdf Oct 30 12:03:00 8.25 it seesm talks about that Oct 30 12:03:04 and it is section 8.25, not 8.5 Oct 30 12:03:43 zecke pasted "ssh key for woglinde" at http://paste.lisp.org/display/69444 Oct 30 12:03:44 bye the way you can build the manual yourself by checking out the doc repos Oct 30 12:03:49 * eFfeM thinks that having a bb file for the latest version of svn is quite risky, better use a date based extract Oct 30 12:04:05 DEFAULT_PREFERENCE_qemu-native = "0.9.1" Oct 30 12:04:20 woglinde: did not know that Oct 30 12:04:54 eFfeM: there is an SVNREV in sane-srcrevs Oct 30 12:04:56 raster no Oct 30 12:04:59 for qemu Oct 30 12:05:07 but whatever svnrev was chosen doesnt work Oct 30 12:05:08 raster, not sure if that will work, I only did this inside specific bb files Oct 30 12:05:17 problem is my prior wqorking tree worked on 0.9.1 Oct 30 12:05:22 so i know that works Oct 30 12:05:26 DEFAULT_PREFERENCE takes argmuents from -1 to 100 not versions Oct 30 12:05:28 yeah Oct 30 12:05:32 i get the specific .bb's Oct 30 12:05:44 the problem is i'm clearing up more general problems and updates for oe Oct 30 12:05:51 si need to have this work "generally" Oct 30 12:06:29 ooh Oct 30 12:06:31 inside the .bb Oct 30 12:06:33 i see Oct 30 12:06:38 packages/glibc/glibc_2.3.2+cvs20040726.bb:DEFAULT_PREFERENCE_sh3 = "-99" Oct 30 12:06:44 hmm Oct 30 12:09:27 raster not everything is perfect (and I guess that since it is still an int it will just work), but feel free to fix and/or write a bug report Oct 30 12:10:30 sure Oct 30 12:10:34 i just have 20 patches to merge in Oct 30 12:10:46 and severalk maintainers to hunt down and "coordinate fixes" with Oct 30 12:10:53 and i now have a non-buildign tree Oct 30 12:11:00 so i'm a bit miffed and want a quick fix Oct 30 12:11:18 oe sucks so much time compared to upstream dev whihc is much faster - i am just trying to minimise time Oct 30 12:11:37 i understand, but I do not have a quick fix Oct 30 12:13:41 sure Oct 30 12:13:42 I just took it as a fact of life. it all depends on who made the bb files and how they tested etc. And not everyone is equally rigid (and yes, I've made my mistakes too, so I tend to be forgiving) Oct 30 12:13:52 the DEFAULT_PREFERENCE seems to work Oct 30 12:13:55 maybe an expert can step up with a fix Oct 30 12:14:07 this is a deep compiler issue/bug Oct 30 12:14:14 cant alloc a register Oct 30 12:14:22 i just want a workign tree again! :) Oct 30 12:14:34 Oct 30 12:14:34 btw Oct 30 12:14:38 ~seen koen Oct 30 12:14:40 koen was last seen on IRC in channel #oe, 322d 2h 8m 17s ago, saying: 'I forgot to commit that portion yesterday'. Oct 30 12:14:53 zecke pasted "other key for woglinde" at http://paste.lisp.org/display/69446 Oct 30 12:14:54 is koen gone here ? Oct 30 12:15:03 whats the down-low with Oct 30 12:15:04 git push origin yourname/testbranch Oct 30 12:15:14 he learned me all those things. I've been away far too long! Oct 30 12:15:22 ie pushing my own branch to oe's git server to people can test/review the patches i've made Oct 30 12:15:57 ie Oct 30 12:16:04 git push origin raster/head Oct 30 12:16:06 for example Oct 30 12:16:42 so i can have my own branch that i can merge with head and keep changes in safely and trickle-feed them back to the main dev branch as the maintainers "approve" Oct 30 12:16:43 ? Oct 30 12:18:49 raster, can't help you with this, I'm not a git wiz Oct 30 12:19:48 raster: try? Oct 30 12:20:23 zecke: is it ok if i do it Oct 30 12:20:29 it is git Oct 30 12:20:38 if i mess somehting up u can always revert/backout etc. Oct 30 12:20:46 just the "guide" says "dangerous" Oct 30 12:20:57 so i'm actually paying attention to the policies Oct 30 12:21:03 raster: --force is dangerous and should be forbidden on org.openembedded.dev :) Oct 30 12:21:08 i am temtped tho to just rabidly commit fixes :) Oct 30 12:21:19 nah Oct 30 12:21:22 not goign to force Oct 30 12:21:29 git-push origin raster/backout looks safe and innocent Oct 30 12:21:36 cool Oct 30 12:21:43 i'll put my changes there for now Oct 30 12:21:47 at leats theiy're published Oct 30 12:21:52 that way i can refer to them easily for review Oct 30 12:22:04 and feed them back to origin as appropriate Oct 30 12:24:54 error: src refspec raster/backout does not match any. Oct 30 12:24:55 hmmm Oct 30 12:25:10 raster: you don't have a local branch called that way? Oct 30 12:25:21 local branch is just "raster" Oct 30 12:25:30 i dont intend to keep multiple branches of my own Oct 30 12:25:33 raster: git-push origin raster:raster/backout? let me take a look Oct 30 12:25:37 just one (me!) Oct 30 12:26:01 git push origin raster:raster/backout Oct 30 12:26:01 ? Oct 30 12:26:09 raster: try that :) Oct 30 12:26:37 nup Oct 30 12:26:39 same error Oct 30 12:26:40 you should get a "mini-me" Oct 30 12:26:46 hahaha Oct 30 12:27:05 you really have a raster branch? Oct 30 12:27:10 yup Oct 30 12:27:13 git-checkout -b raster/raster? Oct 30 12:27:24 and then push that? Oct 30 12:27:53 11:26PM ~/oe/openembedded > git branch Oct 30 12:27:53 org.openembedded.dev Oct 30 12:27:53 * raster Oct 30 12:28:33 workaround is to create raster/raster and push that, I need to get food now Oct 30 12:28:38 is that unhappiness/bad? Oct 30 12:28:44 hmmm Oct 30 12:28:52 ok Oct 30 12:28:59 and that will copy my existing commits over - right? Oct 30 12:29:40 git checkout -b raster/raster will create a branch from your current branch Oct 30 12:29:49 ugh Oct 30 12:29:50 :) Oct 30 12:29:59 ugh Oct 30 12:30:02 that doesnt work Oct 30 12:30:22 11:27PM ~/oe/openembedded > git-checkout -b raster/raster Oct 30 12:30:22 error: unable to resolve reference refs/heads/raster/raster: Not a directory Oct 30 12:30:27 this is not going well Oct 30 12:30:59 03Koen Kooi 07org.openembedded.dev * r3f9ca3c829 10openembedded.git/packages/dsplink/ti-paths.inc: dsplink: add omap3evm support Oct 30 12:32:05 re Oct 30 12:44:26 hi zecke Oct 30 12:49:08 when I do a bitbake virtual/kernel it complains that the preferred version 2.,5 of glibc is not available), yet bitbake glibc-2.5 builds Oct 30 13:06:50 03Koen Kooi 07org.openembedded.dev * r4bbfd7ad9f 10openembedded.git/packages/dropbear/dropbear.inc: Oct 30 13:06:50 dropbear: fix do_install for all distros that aren't named 'openmoko' Oct 30 13:06:50 * IMPORTANT: test -e foo && bar will make do_install exit with an error if 'foo' doesn't exist, so use the if [ -e foo ] ; then pattern instead Oct 30 13:08:49 hmm Oct 30 13:08:59 i hope my push didnt do anything bad.. i hope it went to my branch... Oct 30 13:20:04 did someone built aspell lately? Oct 30 13:23:09 otavio I am not Oct 30 13:26:43 woglinde: libtool is broken; I'll probably add a patch to fix libtool Oct 30 13:27:33 otavio libtool or aspell? Oct 30 13:27:44 woglinde: libtool script in aspell source Oct 30 13:27:59 hehe Oct 30 13:28:34 there are some errors in the newer libtool but no in our proposes Oct 30 13:29:31 03Koen Kooi 07org.openembedded.dev * r26f6477a2d 10openembedded.git/contrib/weekly-changelog-report.py: weekly changelog: add in bugstats from the mtn2cl script Oct 30 13:31:58 humm it could be a failure due the shell Oct 30 13:32:02 let me check Oct 30 13:32:08 it has libtool 2.2.2 on it Oct 30 13:32:13 it shouldn't fail Oct 30 13:33:27 hm# Oct 30 13:33:38 in oe we use 2.2.4 with ansgtroem Oct 30 13:33:40 morning Oct 30 13:33:43 this can cause problems Oct 30 13:33:47 hi vivijim Oct 30 13:36:39 I had issues with libvncserver using libtool 2.2; so I've reverted it locally to use libtool 1.5 Oct 30 13:36:52 * otavio is updating it Oct 30 13:57:37 03Koen Kooi 07org.openembedded.dev * rb6220af33a 10openembedded.git/classes/kernel.bbclass: Oct 30 13:57:37 kernel bbclass: start adding support for >=2.6.27 where headers moved Oct 30 13:57:37 * still lack a symlink for mach/, dunno how to do that properly since the information is dynamically generated with makefiles Oct 30 14:50:40 hi kergoth Oct 30 14:50:51 hey Oct 30 14:53:16 hi kgilmer Oct 30 14:53:22 hey woglinde Oct 30 14:58:24 lo Oct 30 14:58:38 otavio OE enviroment working :D Oct 30 15:15:59 hey guys its possyble to use distcc with bitbake? Oct 30 15:19:40 alo: yes, but it's not likely to result in a statistically significant improvement overall, because i doubt cpu is the main bottleneck for most builds. maybe glibc and stuff.. :) Oct 30 15:21:28 hum.. my problem is that i try to buil all the enviroment in the ps3 to gain speed becose the other option is my laptop celeron 500Mhz ^^ Oct 30 15:21:37 iwas try* Oct 30 15:23:06 all work but when i do bitbake nano the bitbake says something os ppc64 for the ps3 architecture..and i dont saw nothing about over there.. Oct 30 15:23:23 in any case im reading about distcc Oct 30 15:26:38 it should be able to make use of distcc, but i expect you may have to set up the crosscompilers manually.. haven't looked at it in years, maybe someone's improved it Oct 30 15:26:39 * kergoth shrugs Oct 30 15:35:49 morning kergoth Oct 30 15:37:24 re pb Oct 30 15:55:59 some one with OE in the ps3? Oct 30 15:55:59 xd Oct 30 16:33:16 <_diego_> alo, try icecc Oct 30 16:34:59 hi, is there a way to rebuild all packages that depend on some package? Oct 30 16:35:04 using bitbake Oct 30 16:35:38 exodos hm notr really Oct 30 16:37:27 exodos: I'm afraid that you'll have to do it manually... Oct 30 16:37:43 you could add it Oct 30 16:37:45 pretty easily Oct 30 16:38:31 hmmmm Oct 30 16:38:35 * kergoth looks into it Oct 30 16:38:39 I manually added new libdrm-2.4.0 to my package list (because of xf86-driver-intel), now I have to rebuild all packages depending on it Oct 30 16:39:07 but I have no clue how Oct 30 16:39:40 oh, hmm.. nevermind, i was thinking the other way around Oct 30 16:39:47 hm khem has smonething doen for gcc and libc Oct 30 16:39:52 but I am not sure Oct 30 16:40:07 could makea little task to output the package name of any package that deps on it, and go from there Oct 30 16:40:28 kergoth: how can i do that? Oct 30 16:40:32 im newbie with bitbake Oct 30 16:56:50 hey i i wanna compile only the htcuniversal angstrom how much space i need in my /tmp folder??? Oct 30 16:56:55 if* Oct 30 16:57:49 if i want to compile only one image full for a architecture how much space i need? Oct 30 17:02:59 kergoth, exodos: there is something like that: BB_STAMP_POLICY. I didn't really play with it, but if set to the right value bitbake will rebuild all packages that depend on X if you change X Oct 30 17:03:24 But I dont know if its possible for just one package. Oct 30 17:04:05 ALoGeNo hm up to 10gig if you do not use rm_work Oct 30 17:04:49 and how i do that? Oct 30 17:04:56 :)) Oct 30 17:05:14 i have all working 2 days testing.. Oct 30 17:05:15 xD Oct 30 17:06:08 woglinde you think that is a hard work to configure bitbake to build with distcc or something like that? Oct 30 17:10:31 ALoGeNo we have ice support Oct 30 17:11:07 ALoGeNo hm I suggest you read the oe manual Oct 30 17:11:32 this will answer a lot of questions Oct 30 17:11:34 http://bec-systems.com/oe/html/index.html Oct 30 17:11:51 oh.. very nice that link you are so kind :) Oct 30 17:13:05 oh isaw clicked lines.. i need read more there i guess :) Oct 30 17:13:22 tnx in any case :) Oct 30 17:13:29 no porb Oct 30 17:33:42 re robert Oct 30 17:54:01 Hi. I have following misconfiguration error while bitbake: Oct 30 17:54:01 Error, Your PACKAGE_ARCHS field contains duplicates. Perhaps you set EXTRA_PACKAGE_ARCHS twice accidently through some tune file? Oct 30 17:54:01 I updated from mandriva 2008.1 to 2009.0, with same local.conf all was working.. Oct 30 17:54:36 Kalemas we changed the package archs from machine to tuning files Oct 30 17:54:51 and not all machine.conf's are updated yet Oct 30 17:55:07 kalemas which machine for you are compiling? Oct 30 17:55:48 HI. I have following misconfiguration error while bitbake: Oct 30 17:55:48 Error, Your PACKAGE_ARCHS field contains duplicates. Perhaps you set EXTRA_PACKAGE_ARCHS twice accidently through some tune file? Oct 30 17:55:48 I updated form mandriva 2008.1 to 2009.0, earlier all was working. Oct 30 17:56:20 HI. I have following misconfiguration error while bitbake: Oct 30 17:56:20 Error, Your PACKAGE_ARCHS field contains duplicates. Perhaps you set EXTRA_PACKAGE_ARCHS twice accidently through some tune file? Oct 30 17:56:20 I updated form mandriva 2008.1 to 2009.0, earlier all was working. Oct 30 17:56:20 hi guys, is there any list of all supported features? (DISTRO/MACHINE_FEATURES) Oct 30 17:56:28 zecke: ^ Oct 30 17:56:29 dfs Oct 30 17:56:30 vivijim nope Oct 30 17:56:49 kalemas did you read my answers? Oct 30 17:56:57 oh Oct 30 17:57:05 seems some problems with irc client Oct 30 17:57:50 woglinde: :( I think it would be useful to avoid duplications like wifi/wireless touchscreen/ts Oct 30 17:59:08 Hi. I have following misconfiguration error while bitbake: Oct 30 17:59:08 Error, Your PACKAGE_ARCHS field contains duplicates. Perhaps you set EXTRA_PACKAGE_ARCHS twice accidently through some tune file? Oct 30 17:59:08 I updated from mandriva 2008.1 to 2009.0, earlier all was working. Oct 30 17:59:40 Hi. I have following misconfiguration error while bitbake: Oct 30 17:59:40 Error, Your PACKAGE_ARCHS field contains duplicates. Perhaps you set EXTRA_PACKAGE_ARCHS twice accidently through some tune file? Oct 30 17:59:40 I updated from mandriva 2008.1 to 2009.0, earlier all was working. Oct 30 17:59:42 asfd Oct 30 17:59:42 asd Oct 30 17:59:42 a Oct 30 17:59:43 Kalemas2 whats wrong? Oct 30 17:59:43 sd Oct 30 17:59:45 asd Oct 30 17:59:47 asd Oct 30 17:59:49 a Oct 30 17:59:51 sd Oct 30 18:00:11 Kalemas: are you drunk? :P Oct 30 18:00:15 Hi. I have following misconfiguration error while bitbake: Oct 30 18:00:15 Error, Your PACKAGE_ARCHS field contains duplicates. Perhaps you set EXTRA_PACKAGE_ARCHS twice accidently through some tune file? Oct 30 18:00:15 I updated from mandriva 2008.1 to 2009.0, earlier all was working. Oct 30 18:00:20 oh no Oct 30 18:02:19 vivijim: no , I don't think such a list exists. it would be good to have it Oct 30 18:03:48 Hi. I have following misconfiguration error while bitbake: Oct 30 18:03:48 Error, Your PACKAGE_ARCHS field contains duplicates. Perhaps you set EXTRA_PACKAGE_ARCHS twice accidently through some tune file? Oct 30 18:03:48 I updated from mandriva 2008.1 to 2009.0, earlier all was working. Oct 30 18:04:52 Hi. I have following misconfiguration error while bitbake: Oct 30 18:04:52 Error, Your PACKAGE_ARCHS field contains duplicates. Perhaps you set EXTRA_PACKAGE_ARCHS twice accidently through some tune file? Oct 30 18:04:52 I updated from mandriva 2008.1 to 2009.0, earlier all was working. Oct 30 18:06:12 hm will he stop Oct 30 18:06:17 or is he just trolling Oct 30 18:06:30 Kalemas: could you repeat that one more time? Oct 30 18:07:25 Sorry! client was not displayed anything but status messages. Oct 30 18:08:18 Kalemas2 solution is Oct 30 18:08:25 edit your machine conf Oct 30 18:08:33 and remove the package-arch Oct 30 18:08:49 they are now handled by the tune files Oct 30 18:09:03 and not all machine.confs are fixed yet Oct 30 18:11:05 hm Oct 30 18:18:35 jfyi at this moment the complete feature list is: ['acpi', 'alsa', 'apex', 'apm', 'bluetooth', 'connex', 'ethernet', 'ext2', 'fat', 'gps', 'i2c', 'irda', 'iwmmxt', 'kernel24', 'kernel26', 'keyboard', 'lcd', 'mmc', 'nfs', 'pci', 'pcmcia', 'phone', 'ppp', 'raid', 'redboot', 'robostix', 'screen', 'serial', 'smbfs', 'sound', 'spi', 'touchscreen', 'uboot', 'usbgadget', 'usbhost', 'ushbost', 'verdex', 'vfat', 'wifi', 'x86'] Oct 30 18:20:02 woglinde: what i need to remove? "armv4 armv4t armv5te iwmmxt " Oct 30 18:20:20 kalemas2 all that are in the tune file too Oct 30 18:25:54 so bye for now Oct 30 18:28:47 woglinde: ok. it should be : PACKAGE_EXTRA_ARCHS = "iwmmxt"? Oct 30 18:29:09 :^( Oct 30 18:52:27 did someone packaged sun jre and flash? Oct 30 19:36:22 hmm Oct 30 19:39:27 hey to build a single image rootfs is with task-base no? Oct 30 19:45:55 re kergoth Oct 30 19:47:10 hey Oct 30 19:47:59 hm Oct 30 19:48:16 grr, i can reliably make this irc client crash :P Oct 30 19:57:31 03Otavio Salvador 07org.openembedded.dev * rb7983d0f73 10openembedded.git/packages/gnumeric/gnumeric_1.8.3.bb: gnumeric: do not overwrite PACKAGES_DYNAMIC to allow locales to be used Oct 30 19:57:32 03Otavio Salvador 07org.openembedded.dev * ra8744762b0 10openembedded.git/packages/mozilla/fennec/mozconfig: fennec: use system libraries while building Oct 30 20:02:47 03Koen Kooi 07org.openembedded.dev * rc5a381985f 10openembedded.git/packages/mplayer/mplayer_svn.bb: mplayer: enable more inputs Oct 30 20:04:31 03Koen Kooi 07org.openembedded.dev * r6b982d8fbd 10openembedded.git/packages/linux/linux-omap_git.bb: linux-omap git: bump PR for staging changes Oct 30 20:12:38 hmm, http://comments.gmane.org/gmane.comp.version-control.git/99516 Oct 30 20:33:29 re florian Oct 30 20:35:45 re Oct 30 21:02:57 anyone familiar with angstrom? Oct 30 21:03:10 i cant use the 'make' command.... Oct 30 21:03:24 is there another command that angstrom uses ? Oct 30 21:03:28 ???? Oct 30 21:03:33 bitbake Oct 30 21:03:35 and their website is down Oct 30 21:03:44 ..... bitbake? Oct 30 21:03:49 hm yes linuxtogo seems to have problems Oct 30 21:04:03 Fl1pFl0p: for what and from where you trying to use 'make'? Oct 30 21:04:19 make mekaiser Oct 30 21:04:21