**** BEGIN LOGGING AT Thu Nov 27 02:59:57 2008 Nov 27 03:18:25 anyone here use src_distribute_local in a config file? Nov 27 03:20:20 bye Nov 27 07:11:01 hi~ is it possbile to make OE pre-fetch all the source packages before compiling? Nov 27 07:26:31 is openembedded.net supposed to show just a silly "nothing here" and a link to openembedded.org? Nov 27 07:31:43 morning Nov 27 07:31:54 Openfree: bitbake -cfetchall target Nov 27 07:33:37 hrw, thanks, before i've tried "bitbake -c fetch xx", and doesn't work Nov 27 07:47:56 np Nov 27 08:08:28 anoybody of you working with intel atom? Nov 27 08:08:59 is there a kernel out which is know to work quiet good with the processor and the iegd_mod kernel module? Nov 27 08:46:13 awesome, shasum-native compiles and works but the do_compile fails Nov 27 09:58:10 nik0n: look at poky trunk - they work on atom machines Nov 27 10:02:31 hrw: are they on actual h/w already? Nov 27 10:02:44 hrw: are you involved with Poky still? Nov 27 10:03:17 hrw: I'm interested in bringing the x86 support in OE in-sync with current state of affairs (poky and intel wise) Nov 27 10:10:56 likewise: I am not involved in Poky trunk anymore - I work on Poky 'pinky' based repository for one client. Poky guys works on actual hardware (existing and/or not-released probably too) Nov 27 10:13:38 hrwq: pinky is a release name? Nov 27 10:13:54 yes Nov 27 10:14:00 3.1 was pinky Nov 27 10:14:28 there is branch for elroy but it was not released and there is no info when it will be released Nov 27 10:14:41 but Atom stuff is only in trunk Nov 27 10:21:30 morning all Nov 27 10:22:06 hi thesing florian Nov 27 10:31:53 morning Nov 27 10:34:48 morning Nov 27 10:45:16 I have a build problem with gcc-cross-sdk on i386, has someone noticed this ? http://pastebin.com/m5f78a88d Nov 27 10:55:45 zecke: hail zecke Nov 27 11:02:37 huhu Nov 27 11:02:54 did anyone try OE with TI DA83xx hardware? Nov 27 11:05:47 rather da8xx :) Nov 27 11:09:26 Jin^eLD: DA83xx? Nov 27 11:09:33 Jin^eLD: and hi! Nov 27 11:09:36 DA8xx, no "3", my mistake Nov 27 11:09:39 hey likewise Nov 27 11:12:02 Jin^eLD: is that successor to omap3? Nov 27 11:13:30 it seems so Nov 27 11:13:46 I am not quite sure Nov 27 11:15:01 I am wondering if anyone had any contact with it Nov 27 11:15:19 and maybe tried it with OE Nov 27 11:15:35 is someone able to build gcc-cross-sdk-4.2.4-r4 ? Nov 27 11:30:26 what is the name of the stage in OE/bitbake when ltmain.sh (from libtool) is used when you build a library ? Nov 27 11:32:15 hum ... looks like libtoolizing is done at configuration stage (do_configure) Nov 27 11:37:07 you mean when libtool itself is built? yes, that happens during do_configure. Nov 27 11:45:07 hmm.. drivers/power/ driver for AC handling looks interesting Nov 27 11:50:51 hrw: In what way? Nov 27 11:51:25 can somebody look why my bitbake destroys src urls? http://pastebin.ca/1268554 Nov 27 11:53:08 broonie: I have device (7y old progear) which lack AC/Battery reporting. I have ugly hacked acpi drivers for older 2.6 (2.6.19 works) which get AC (via pci config area) and Battery (via i2c) Nov 27 11:53:45 broonie: now want to write new drivers basing on those ones. hacking acpi is no use as AC is not reported by acpi on this device at all Nov 27 11:54:11 Oh, you mean it's of interest rather than in the "interesting times" sense? Nov 27 11:54:30 yep Nov 27 11:57:46 likewise: I was wrong after all, it is DA830 Nov 27 12:10:23 have it before me right now :> Nov 27 12:11:55 Jin^eLD: damn you :-) Nov 27 12:12:10 Jin^eLD: ask on #beagle! Nov 27 12:12:52 Jin^eLD: where is the link to that board? Nov 27 12:14:40 hmm I don't know, I'd have to look in google Nov 27 12:23:44 I gave up Nov 27 12:24:53 platform_device etc stuff in kernel scared me Nov 27 12:25:38 there is lot of code just to open/read/close to get status etc Nov 27 12:25:53 Really? Nov 27 12:26:16 Power drivers are pretty lightweight - you just get a callback from the core and fill in the blank. Nov 27 12:27:19 maybe I will do another attempt but tis time not using pda_power as base example Nov 27 12:28:02 palmtx one looks more sane Nov 27 12:57:02 03Koen Kooi  07org.openembedded.dev * r9c46ce7b5a 10openembedded.git/packages/linux/ (4 files in 2 dirs): linux-omap git: bump SRCREV Nov 27 13:07:06 ok, lets reboot and check Nov 27 13:14:07 johncylee: moin Nov 27 13:14:20 zecke: 早安 Nov 27 13:14:29 man, somehow kmail refuses to talk to the imap server :( Nov 27 13:14:41 zecke: (good morning in Chinese) Nov 27 13:19:17 http://www.youtube.com/watch?v=m1GBPreUPXk& - 1GB/s from nand Nov 27 13:28:22 03Koen Kooi  07org.openembedded.dev * rbb668b9e99 10openembedded.git/packages/angstrom/angstrom-feed-configs.bb: angstrom feed configs: generate config files for locale feeds as well Nov 27 13:30:19 03Koen Kooi  07org.openembedded.dev * rf00490ab31 10openembedded.git/conf/distro/include/angstrom.inc: angstrom: use src_distribute_local in symlink mode by default Nov 27 14:01:49 atc: there are no CDs there anymore Nov 27 14:01:51 oops wrong window Nov 27 14:01:52 :) Nov 27 14:04:16 03Koen Kooi  07org.openembedded.dev * r7b10f59aca 10openembedded.git/ (conf/checksums.ini packages/vlc/vlc_0.9.4.bb): vlc: update 0.9.4 to 0.9.6 to get rid of the "version has vulnerabilities" nag screen Nov 27 14:06:40 argh Nov 27 14:18:03 what does this get me? $ git clone git://git.openembedded.net/openembedded Nov 27 14:18:08 the org.openembedded.dev? Nov 27 14:18:37 vimacs: I'm holding back my vomit reflexes ;) Nov 27 14:18:43 oops wrong window :> some fonts talk heh Nov 27 14:21:38 Jin^eLD: yes, org.oe.dev Nov 27 14:22:03 so I do not have to go to some branch separaetely, thats already the dev thing? btw, will there be an updated stable? Nov 27 14:24:19 Jin^eLD: dunno, I could not use the current stable in any product, so I was not able to spend any time on maintaining it... that sucked. Nov 27 14:25:14 I see Nov 27 14:25:27 well, it's kind of old if one wanted to use it for a new project I guess Nov 27 14:28:12 ~curse platform model Nov 27 14:28:13 May you be reincarnated as a Windows XP administrator, platform model ! Nov 27 14:29:05 elo otavio Nov 27 14:32:28 sick Nov 27 14:32:52 hrw: ? Nov 27 14:34:48 hmm Nov 27 14:34:53 I keep getting an error from the staging helper Nov 27 14:34:58 some shell magic is not working out Nov 27 14:35:07 syntax error near unexpected token `(' Nov 27 14:35:12 and that's the check for kernel size Nov 27 14:35:27 did anyone see that? Nov 27 14:36:58 broonie: device/driver platform model strikes again Nov 27 14:37:06 * hrw is not a kernel hacker type Nov 27 14:38:10 hrw: It should be fairly simple? The only magic bit is that you separately say "there is hardware of type X" and "there is a driver for hardwar of type X" then the kernel matches them up at run time. Nov 27 14:38:15 my init function is called, driver registers fine but probe() function is never called Nov 27 14:38:29 Are you registering the device? Nov 27 14:38:30 this is the failing generated line die "This kernel (size=$size > ) is too big for your device. Please reduce the size of the kernel by making more of it modular." Nov 27 14:38:37 it does not like the parens -> "(" Nov 27 14:38:37 broonie: that hardware is one register in PMU Nov 27 14:38:56 Normally that's done outside of the driver so you won't see it in what you're templating off. Nov 27 14:39:14 eg, in arch/arm on ARM systems. Nov 27 14:39:27 fscking crap Nov 27 14:40:20 It means that the driver can run on more than one board - the board specific init tells the kernel what hardare is present. Nov 27 14:40:41 platform_device_register_simple() in your init() function should do the trick, though. Nov 27 14:40:45 03Otavio Salvador  07org.openembedded.dev * rba930010d4 10openembedded.git/packages/xfce/ (xfce-terminal/into-support.patch xfce-terminal_0.2.8.bb): xfce-terminal: add --into support Nov 27 14:45:26 broonie: http://pastebin.ca/1268620 Nov 27 14:46:22 broonie: init registers driver, then register_simple() device and quits. Nov 27 14:46:46 hrw: you have a device with the name on the bus? Nov 27 14:46:47 can I somehow disable the testlab.bbclass? Nov 27 14:46:50 hrw: You're registering a device called progear-ac and a driver called progear-power Nov 27 14:46:55 it adds some shell stuff that is broken Nov 27 14:47:58 broonie: argh.. that was that.. now it works^Woops Nov 27 14:51:05 ah I see.. angstrom.inc is inheriting it.. Nov 27 14:52:56 8 years old bioses are nightmare Nov 27 14:54:43 doh... Nov 27 14:55:05 I thought testlab produces the staging helper scripts, I took testlab out of angstrom.inc but it's still used Nov 27 14:55:38 what exactly is the staging helper doing anyway? Nov 27 15:13:09 guys? anyone? what is this "staging helper" and is it possible to continue without it? Nov 27 15:23:58 microlith: disable ccache Nov 27 15:36:19 bye Nov 27 15:36:29 broonie: reading AC works now ;D Nov 27 17:24:37 mwester: oh, didn't see your response... must've been a while ago. thanks! Nov 27 17:56:35 hello :) there was a change to the name of the root dir when migrating from monotone to git: org.openembedded.dev became openembedded. Nov 27 17:56:39 right? Nov 27 17:58:02 i ask because i'm starting fresh with the git repo and this is what i'm seeing. also some wiki stuff still references the old name. so i was going to fix it... Nov 27 18:03:07 alright, well, I changed the wiki. Nov 27 18:04:12 it would seem, however, that the Introduction section needs to be rewritten. Nov 27 18:05:58 i left the intro alone but it will need to be changed if a n00b like me can make sense of it Nov 27 18:16:25 hi mickey|ezx Nov 27 18:19:41 morning pb__ Nov 27 18:26:54 anyone run into an issue where builds fail with the message "collect2: cannot find 'ld'"? Nov 27 18:37:31 microlith: i had some thing like this... Nov 27 18:37:48 what is the previous line? Nov 27 18:45:18 nothing Nov 27 18:45:21 the log contains only that line Nov 27 18:50:10 strange, what package do you build? Nov 27 18:50:39 happens on shasum-native Nov 27 18:50:47 trying to do build nano Nov 27 18:50:51 just to get started Nov 27 19:05:45 please, ensure you have setup all properly, check installed packages on host. what says gcc --version? can you build programs on your host? Nov 27 19:07:22 gcc version is 4.2, I installed it because 4.3 was giving me fits on another, unrelated machine Nov 27 19:07:30 and yes, I can build applications fine on the host Nov 27 19:07:47 in fact, shasum-native builds and runs normally Nov 27 19:56:24 03Marcin Juszkiewicz  07org.openembedded.dev * r5eaec46687 10openembedded.git/conf/machine/progear.conf: progear: do not recommend ac/battery modules cause they break with newer kernels Nov 27 19:56:28 03Marcin Juszkiewicz  07org.openembedded.dev * r1f80b4adde 10openembedded.git/conf/checksums.ini: checksums.ini: added junit, progear-ac, ruby Nov 27 19:56:28 03Marcin Juszkiewicz  07org.openembedded.dev * rd93dc9bb5d 10openembedded.git/conf/machine/progear.conf: progear: use pentium mmx tune, switch to i586 Nov 27 19:56:35 03Marcin Juszkiewicz  07org.openembedded.dev * ra3957793fc 10openembedded.git/conf/machine/progear.conf: progear: install all kernel modules Nov 27 19:56:38 03Marcin Juszkiewicz  07org.openembedded.dev * rb1ae267e2b 10openembedded.git/packages/linux/ (4 files in 3 dirs): Nov 27 19:56:41 linux: added 2.6.27 as default for Progear Nov 27 19:56:58 Progear also use one update for backlight and experimental driver for AC Nov 27 19:56:58 status. Nov 27 19:56:58 03Marcin Juszkiewicz  07org.openembedded.dev * r1e7a38fcda 10openembedded.git/conf/machine/include/tune-pentiummmx.inc: tune-pentiummmx.inc: tune for MMX i586 Nov 27 19:56:58 03Marcin Juszkiewicz  07org.openembedded.dev * r4852999e82 10openembedded.git/conf/checksums.ini: checksums.ini: added progear-battery Nov 27 20:06:30 shocking. and OE facebook group. Nov 27 20:10:46 timtimred: where? Nov 27 20:11:10 search for it and click groups... Nov 27 20:11:17 if its not already there Nov 27 20:11:35 timtimred: you need to be a member there? Nov 27 20:11:55 i dont but i just joined. despite the normal strict ban of geek stuff from my profile ;) Nov 27 20:12:43 in fact 3 of us from foonas all joined it today Nov 27 20:30:18 there is also OE group on linkedin Nov 27 20:32:07 im still trying to accumilate enough will power to join another social network thing. Nov 27 20:32:38 johncylee: oh, go to bed! Nov 27 20:32:39 facepoke takes up enough time Nov 27 21:56:12 re Nov 27 21:57:08 hi florian Nov 27 21:57:10 03woglinde  07org.openembedded.dev * rbdab38d2b5 10openembedded.git/packages/qtnx/ (8 files in 2 dirs): (log message trimmed) Nov 27 21:57:10 qtnx: add my latets patches from the n810 work Nov 27 21:57:10 * add patch for keychoose dialog Nov 27 21:57:10 * integrate the stuff from the dodnx fork Nov 27 21:57:10 including the nxssh-proxy support Nov 27 21:57:12 * add patch for choosing the keyboard Nov 27 21:57:16 * add patch for delete session files Nov 27 22:05:44 he otavio Nov 27 22:16:14 hi woglinde Nov 27 22:17:34 he pb Nov 27 22:24:11 hi all Nov 27 22:24:30 hi hamid_rostami Nov 27 22:24:47 i'm new to oe, have an error when i want too compile fr example nano Nov 27 22:25:24 http://paste.ubuntu.com/77511/ Nov 27 22:26:01 sqlite3.OperationalError: attempt to write a readonly database Nov 27 22:26:28 woglinde: yes Nov 27 22:28:13 why this error occured ? Nov 27 22:28:39 ro filesystem? Nov 27 22:31:08 woglinde: which filesystem ? Nov 27 22:35:53 sorry, is there anyone to help ? Nov 27 22:37:56 hamid_rostami the filesystem where you point your oetmp-dir Nov 27 22:38:56 woglinde: ext3, but i'm not set oetmp-dir Nov 27 22:41:02 woglinde: oh yes, i'm set it, ext3 Nov 27 22:42:15 where did you point TMPDIR in your local.conf? Nov 27 22:42:34 woglinde: TMPDIR = /home/hamid/OE/oetmp Nov 27 22:42:58 Anyone here familiar with using src_distribute_local in config files? Nov 27 22:51:45 * hamid_rostami waiting :) Nov 27 22:54:41 hamid_rostami is there a file in /home/hamid/OE/oetmp? Nov 27 22:54:55 can you do a touch /home/hamid/OE/oetmp/moo ? Nov 27 22:56:44 woglinde: oh, that problem is resolved, Nov 27 22:57:08 woglinde: with chmod 777 -R oetmp Nov 27 22:57:46 hm Nov 27 22:57:50 a soultion Nov 27 22:57:55 but not the best one Nov 27 22:58:01 woglinde: yes :) Nov 27 22:58:13 woglinde: now, i have anouther error Nov 27 22:58:59 go on Nov 27 22:59:23 woglinde: no, resolved :) Nov 27 22:59:36 haha Nov 27 23:00:15 woglinde: echo 0 > /proc/sys/vm/mmap_min_addr :) Nov 27 23:03:15 yes Nov 27 23:22:55 03woglinde  07org.openembedded.dev * rcb59c63769 10openembedded.git/ (conf/checksums.ini packages/libxcomp/libxcomp_3.3.0-3.bb): Nov 27 23:22:55 libxcomp: update to latest releas from nomachine Nov 27 23:22:55 * remove the patch for ssh we will now use nxssh Nov 27 23:22:55 which has ssh-proxy support Nov 27 23:22:57 03woglinde  07org.openembedded.dev * r6612250684 10openembedded.git/packages/nxcl/libnxcl_0.9.bb: libnxcl: set RDEPENDS to nxssh and bump PR Nov 27 23:23:00 03woglinde  07org.openembedded.dev * r5473b49afe 10openembedded.git/ (5 files in 3 dirs): nxssh: initial import Nov 27 23:23:03 03woglinde  07org.openembedded.dev * rdce11f705f 10openembedded.git/ (conf/checksums.ini packages/nxproxy/nxproxy_3.3.0-2.bb): Nov 27 23:23:06 nxproxy: update to latest release from nomachine Nov 27 23:23:08 * disable patch for stock-ssh support, because Nov 27 23:23:10 we are now using nxssh with ssh-proxy support Nov 27 23:27:44 woglinde: go to bed Nov 27 23:30:43 hehe Nov 27 23:30:46 soon Nov 27 23:30:53 have to send out assigment over Nov 27 23:32:58 zecke you should sleep too **** ENDING LOGGING AT Fri Nov 28 02:59:57 2008