**** BEGIN LOGGING AT Tue Dec 30 02:59:56 2008 Dec 30 03:20:34 hi. Can Oe build the elf format image? Dec 30 03:34:34 elf format? Dec 30 03:34:45 as in the standare linux binary format? Dec 30 03:34:51 standard Dec 30 05:00:57 yes. the zoom board wants the excute linux format elf image. Dec 30 05:10:56 ummm yes Dec 30 05:11:06 in fact elf is pretty much the only thng anyone produces... Dec 30 05:12:53 how to make that format image in oe? can it do that? raster, thanks Dec 30 05:13:25 oe generates file system images Dec 30 05:13:28 and kernel images Dec 30 05:13:28 kernel is elf Dec 30 05:13:35 file system is dependent on what u want Dec 30 05:13:39 jffs2? Dec 30 05:13:39 cramfs? Dec 30 05:13:41 yaafs? Dec 30 05:13:44 err yaffs? Dec 30 05:13:49 a tarball Dec 30 05:13:52 ext2 Dec 30 05:13:52 etc. Dec 30 05:14:22 but kernel is named with uImage-beagleboard.bin? is that the elf format? Dec 30 05:15:27 yes Dec 30 05:26:07 thanks Dec 30 09:04:09 good morning Dec 30 09:04:36 hey ant_work Dec 30 09:05:33 long time I don't see you around cyril! Dec 30 09:05:43 ant_work: halo :) Dec 30 09:06:02 hey Yuri Dec 30 09:08:09 ant_work: I needed some docs about building kexecboot-enabled image :) Dec 30 09:08:33 I've send email to you Dec 30 09:09:38 answering :-) Dec 30 09:09:49 good :) Dec 30 09:10:14 I will build qemu-arm image for testing Dec 30 09:10:14 in the meanwhile check Zubunto multiboot kernel Dec 30 09:10:22 :-) Dec 30 09:14:17 Jay7: Cortez/Omegamoon is working on kexecboot too. He added an image.nfo file to have a 'label' for each image Dec 30 09:15:13 ant_work: is this work available from kexecboot's git repo? Dec 30 09:15:40 the last changes of Cortez? No Dec 30 09:15:54 But he'll be happy to cooperate with you Dec 30 09:16:10 ant_work: indeed! lack of time ;-/ Dec 30 09:16:33 ant_work: from what I see you are quite active in oe, good! :) Dec 30 09:16:51 ant_work: patches wanted! :) Dec 30 09:20:15 ant_work: mail recieved :) Dec 30 09:20:37 Jay7: I'm testing a crazy setup: one image in /mtd2, another on /mtd3...seems to work too...but very little space for /home then Dec 30 09:20:44 ant_work: you can give omegamoon my email for contacts Dec 30 09:21:07 ok, I'll do, thx Dec 30 09:21:53 I'll started my work on kexec at 3-4 jan Dec 30 09:22:17 we have holydays up to 11 jan :) Dec 30 09:22:49 last time one night was enough..now you'll have a week :-) Dec 30 09:23:18 but now we have more work :) Dec 30 09:23:25 he he Dec 30 09:23:48 btw, we needed to check masterplan ;) Dec 30 09:23:52 I'm still mumbling about the sharp bootloader params table... Dec 30 09:24:46 btw Cortez proposed to add keys [R] Rescan Dec 30 09:24:53 and another one I can't remember Dec 30 09:24:56 :/ Dec 30 09:25:26 I'll do device detection, remembering last choice and timeout Dec 30 09:25:47 device detection == set fbangle, etc.. Dec 30 09:25:59 good, try to integrate that image.nfo too Dec 30 09:25:59 rescan is good idea Dec 30 09:26:28 yes, this is should be not a problem Dec 30 09:26:54 ah, and for sleepy people he changed the text..'..press OK' Dec 30 09:26:58 he he Dec 30 09:27:08 may be better is to integrate cmdline, image.nfo and others into any single file? Dec 30 09:27:53 dunno, image.nfo seems optional anyway Dec 30 09:56:56 re Dec 30 09:59:04 hi hrw Dec 30 10:00:22 I hate x11 images in OE Dec 30 10:03:02 he I hate x11 images without keyboard too! Dec 30 10:03:45 hehe.. Dec 30 10:05:44 I do not want to know why in OE x11==gpe Dec 30 10:06:02 Jay7: check mail again...there are a lot of patches actually Dec 30 10:07:02 ant_work: I'll see Dec 30 10:07:08 until koen / someone decides for the switch to kexecboot, we have the embarrasing situation with fstab and no kernel in boot Dec 30 10:07:15 ant_work: thanks :) Dec 30 10:08:21 and now, enabling the CF boot the hack for the modularized pxa2xx and pcmcia are not needed anymore Dec 30 10:08:58 hrw did all this modules work iirc Dec 30 10:09:16 now we are dismounting it... Dec 30 10:44:39 03Koen Kooi  07org.openembedded.dev * rbf16690e25 10openembedded.git/ (4 files in 2 dirs): gupnp: add gupnp and gssdp from poky and update to latest release Dec 30 10:51:39 hi ant_work Dec 30 10:55:39 hey pb__ Dec 30 10:58:32 It's quiet... Dec 30 11:01:46 hrw: are you still around? Dec 30 11:03:13 how is it that linux-rp-2.6.26/defconfig-c7x0 has CONFIG_CPU_FREQ_PXA25x=y Dec 30 11:04:03 and after editing for kexecboot additions (menuconfig) the result is CONFIG_CPU_FREQ_PXA=y Dec 30 11:04:07 ??? Dec 30 11:12:24 ah, ok CPU_FREQ_PXA was added to 2.6.26 Dec 30 11:22:56 ;) Dec 30 11:36:52 03Koen Kooi  07org.openembedded.dev * re388411c2d 10openembedded.git/packages/upnp/gupnp-vala_0.4.bb: gupnp-vala: fix staging and license Dec 30 12:14:28 03Koen Kooi  07org.openembedded.dev * rae8ac1997d 10openembedded.git/ (conf/checksums.ini packages/upnp/gupnp-av_0.2.bb): gupnp-av: add 0.2 Dec 30 12:14:39 03Koen Kooi  07org.openembedded.dev * r68f1bdf9ae 10openembedded.git/ (conf/checksums.ini packages/gstreamer/gstreamer_0.10.21.bb): gstreamer: add 0.10.21 Dec 30 12:23:19 03Koen Kooi  07org.openembedded.dev * rbdd25bcce3 10openembedded.git/packages/libgee/libgee_0.1.2.bb: libgee: update to 0.1.4, fix staging and fix -dev package Dec 30 12:53:05 * * OE Bug 4952 has been created by javiroman(AT)kernel-labs.org Dec 30 12:53:07 * * packages/u-boot/u-boot_git.bb git fetch fails Dec 30 12:53:09 * * http://bugs.openembedded.net/show_bug.cgi?id=4952 Dec 30 12:57:06 * * OE Bug 4953 has been created by javiroman(AT)kernel-labs.org Dec 30 12:57:08 * * packages/mtd/mtd-utils-native_1.0.0+git.bb, do_fetch fails Dec 30 12:57:10 * * http://bugs.openembedded.net/show_bug.cgi?id=4953 Dec 30 13:40:05 I hate busybox and its dissapearing history Dec 30 13:44:02 hrw, ? busybox disappearing? Moving places? Dec 30 13:49:08 I call command and then I am unable to 'ctrl-p/up' it Dec 30 13:49:14 in same shell session Dec 30 13:56:00 ah ok... Dec 30 13:56:18 Doesn't that depend on the shell compiled in? Dec 30 13:56:53 the fun is that it depends on no idea why. same binary works or not etc Dec 30 13:58:47 hrw, agreed :) Dec 30 14:01:55 ok.. now my image should not have udev and work.. Dec 30 14:05:10 why does oe download two curl packages? Dec 30 14:05:27 One is curl-7.18.2, another is curl-7.19.0 Dec 30 14:07:26 target and native? Dec 30 14:09:23 oh, maybe Dec 30 14:09:26 let me check Dec 30 14:10:13 I think you are correct. Dec 30 14:10:33 the 7.18 is native one Dec 30 14:11:44 anybody here who is a administrator on forums at www.oesf.org ? Dec 30 14:15:05 vacum: oesf forums are not related to oe Dec 30 14:15:08 ~oesf Dec 30 14:15:09 hmm... oesf is rumour has it, oesf is newer name of ZUG - it provides forum for Zaurus/Ipaq/Simpad/etc users (see zug). It has nothing in common with OpenEmbedded (except for the first two letters), see http://www.oesf.org/ Dec 30 14:15:23 ah Dec 30 14:15:25 ok then i know Dec 30 14:16:02 i registered as a user there and have waited for it to be validated for a week now. maybe more. :-) Dec 30 14:19:35 ~gpe Dec 30 14:19:36 somebody said gpe was the Great Palmtop Environment and can be found at http://gpe.linuxtogo.org - Join #gpe to chat about it. Dec 30 14:19:52 ~gpe-projects Dec 30 14:20:22 ~handhelds Dec 30 14:20:23 well, handhelds is http://www.handhelds.org/ or http://www.handhelds.org/mailman/listinfo.cgi/handhelds or http://www.zdnet.com/products/filter/guide/0,7267,1500114,00.html Dec 30 16:33:47 03Koen Kooi  07org.openembedded.dev * r49345c6250 10openembedded.git/conf/checksums.ini: checksums: add libgee Dec 30 16:33:49 03Koen Kooi  07org.openembedded.dev * r814da25dfa 10openembedded.git/packages/xserver-common/ (files/98keymap-fixup xserver-common_1.22.bb): xserver-common: add workaround for xmodmap problems with kdrive 1.4+ Dec 30 16:56:40 03Koen Kooi  07org.openembedded.dev * ra6105013ed 10openembedded.git/packages/glib-2.0/ (glib-2.0_2.18.3.bb glib.inc): glib-2.0: fix path to perl in glib-mkenums Dec 30 18:00:54 what is the latest version of angstrom that works with opie? Dec 30 18:07:35 is the best version to use still 2007.12? Dec 30 18:07:57 don't want to burn a day downloading and compiling an out of date version Dec 30 18:19:38 Soopaman: i installed the 2007-version and tried updating but it didn't work Dec 30 18:36:58 i successfully built OE with the Angstrom distro and am successfully running on the AT91SAM9261ek. However, the touchscreen does not respond. I see in the bootup "ADS784x Touchscreen as /class/input/input1" Do I need to make an entry in /dev for it to work? Do I need to add something to xorg.conf? Dec 30 18:43:16 leonardo_: is there a device node there? Does udev run? Dec 30 18:44:37 likewise: there is no /dev/input/xxx Dec 30 18:44:56 don't know if udev is started by default for this distro Dec 30 18:45:47 did a cat /proc/bus/input/devices and found that it uses event mouse0 Dec 30 18:46:40 leonardo_: hmm you could add a node then snoop with od -x /dev/some to see if it gives output. Dec 30 18:48:16 that gives output when i touch the touchscreen Dec 30 18:48:26 /dev/input/mouse0 Dec 30 18:51:01 likewise: should i have to add the inputdevice into xorg.conf? Dec 30 18:51:37 leonardo_: I'm not an expert on X, but yes, I would try that. Dec 30 19:09:35 03Koen Kooi  07org.openembedded.dev * rdacc353802 10openembedded.git/packages/lirc/lirc-modules_0.8.3+cvs20081230.bb: lirc modules: add 20081230 cvs version Dec 30 19:39:46 03Koen Kooi  07org.openembedded.dev * rf4ec6e2b0e 10openembedded.git/packages/mythtv/ (mythtv.inc mythtv_0.21.bb): mythtv 0.21+fixes: update srcrev Dec 30 19:57:51 is there anyone around who can help me with a touchscreen problem? I build the angstrom distro using OE. The device works using od -x /dev/input/mouse0 however, in GPE there is no response when i touch the screen. Dec 30 19:58:43 hm Dec 30 19:58:53 are the tslib utils woriking? Dec 30 19:59:09 touchscreen is normaly a event dev Dec 30 20:00:53 when i run ts_calibrate it says "selected device is not a touchscreen I understand" Dec 30 20:01:00 are there other ts tests i can run? Dec 30 20:01:52 cat /proc/bus/input/devices shows that the handler is mouse0 Dec 30 20:02:07 sysfs=/class/input/input1 Dec 30 20:02:54 hm sorry Dec 30 20:02:59 then I dont know Dec 30 20:03:03 which device is it? Dec 30 20:03:12 /dev/input/mouse0 Dec 30 20:03:38 when i run od -x /dev/input/mouse0 and touch the screen, it spits out data Dec 30 20:04:04 hm no I meant the board Dec 30 20:04:22 at91sam9261ek Dec 30 20:06:22 ads7846 touchscreen Dec 30 20:06:26 hm Dec 30 20:06:27 sorry Dec 30 20:06:31 never worked with it Dec 30 20:06:48 is tslib working when you use the moues0 dev? Dec 30 20:07:06 how can i check that? Dec 30 20:10:30 edit ts.conf Dec 30 20:10:33 or tslib.conf Dec 30 20:10:40 sorry do not know the excat name yet Dec 30 20:10:45 is somewhere under etc Dec 30 20:10:53 morning all Dec 30 20:10:57 there's a ts.conf Dec 30 20:11:04 he rp Dec 30 20:11:05 :) Dec 30 20:11:18 the edit ts.conf Dec 30 20:11:21 then Dec 30 20:11:43 how so? you mean to create an error? Dec 30 20:14:55 ???? Dec 30 20:15:35 ah sorry Dec 30 20:15:37 its tslib.sh Dec 30 20:16:10 hm Dec 30 20:17:09 what module is loaded in your ts.conf? Dec 30 20:17:41 module_raw input grab_events=0 Dec 30 20:17:48 hm okay Dec 30 20:17:49 sorry Dec 30 20:17:58 than I have no clue Dec 30 20:18:02 whats going wrong Dec 30 20:18:19 yeah, just seems like i need to match GPE up to the right device Dec 30 20:18:33 don't know anything about configuring GPE though Dec 30 20:47:04 j Dec 30 21:01:06 * * OE Bug 4954 has been created by hynek.petrak(AT)gmail.com Dec 30 21:01:08 * * glib-2.0 Dec 30 21:01:09 * * http://bugs.openembedded.net/show_bug.cgi?id=4954 Dec 30 21:13:00 03Koen Kooi  07org.openembedded.dev * r759087837b 10openembedded.git/packages/glib-2.0/glib.inc: glib.inc: add || true after sed Dec 30 22:51:47 hey prpplague, how is it with your scheduling ? Dec 30 22:52:26 ant__: tight Dec 30 22:52:31 ant__: whats ups? Dec 30 22:52:47 the fix for xmodmap was committed hours ago Dec 30 22:52:57 ant__: yea koen pinged me on that Dec 30 22:53:09 kind Dec 30 22:53:29 ant__: beer works very well as a bribe Dec 30 22:54:16 he, neural lubricant Dec 30 22:56:35 indeed Dec 30 22:57:53 sh@it...i/o errors during nandwrite... Dec 30 22:59:36 doh Dec 30 23:00:00 hopefully read errors from sd card... Dec 30 23:00:31 * prpplague needs to figure out some good bounties for matchbox and gpe apps Dec 30 23:01:39 prpplague: :) Dec 30 23:01:53 hi hi Dec 30 23:03:50 florian: http://www.elinux.org/M8050 , the keyboard has a text entry feature, if you press the orange button on the right it turns off the numlock and turns on the capslock to do text Dec 30 23:04:03 hi ant Dec 30 23:04:11 florian: press it a second time, it turns off the numlock and capslock which does lower case text Dec 30 23:04:16 hey woglinde Dec 30 23:04:29 florian: third time turns on the numlock which does numberics Dec 30 23:05:03 florian: need something for the mb-panel thats does "123" "ABC" and "abc" so people know what mode the keyboard is in Dec 30 23:05:56 prpplague: thumbpad did something like this for text input. its some time ago I touched it but it should do the trck basically. Dec 30 23:06:12 hmm Dec 30 23:06:19 * prpplague googles thumbpad Dec 30 23:06:45 http://thumbpad.home.linuxtogo.org/ Dec 30 23:06:59 that's not really easy to google I suspect Dec 30 23:08:05 florian: ahh, this is handled in the kernel level Dec 30 23:08:16 florian: i just need some applet on the panel to indicate the status Dec 30 23:08:53 prpplague: i guess you could use this as well Dec 30 23:09:13 florian: yea, grabing a copy for reference Dec 30 23:09:26 yep Dec 30 23:09:50 florian: i was thinking more like something similiar to the clock applet Dec 30 23:12:13 * ant__ is finally booting opie on /mtd2 and x11-gpe on /mtd3...he..121mb for two is narrow! Dec 30 23:13:18 what bitbake revision goes with oe git head? trunk? Dec 30 23:34:57 anyone: what (recent combo of bitbake and OE metadata does parse? Dec 30 23:51:46 03Ulf Samuelsson  07ulf/atmel * rc7c649a882 10openembedded.git/conf/distro/include/sane-srcrevs.inc: Update revision of opkg-native Dec 30 23:51:46 03Ulf Samuelsson  07ulf/atmel * rcae2ae9bef 10openembedded.git/conf/checksums.ini: Add checksum for linux-2.6.28 Dec 30 23:51:48 03Ulf Samuelsson  07ulf/atmel * rac51dd7fd8 10openembedded.git/packages/linux/linux-2.6.28/at91sam9263ek/ (3 files): Add AT91 patches for linux-2.6.28 Dec 30 23:51:48 03Ulf Samuelsson  07ulf/atmel * r1f5f2c8b0d 10openembedded.git/packages/linux/at91-2.6.28/at91sam9263ek/ (3 files): Remove duplicate package Dec 30 23:51:55 03Ulf Samuelsson  07ulf/atmel * rd8ffe9735f 10openembedded.git/conf/machine/at91sam9263ek.conf: Lean config for sam9263ek Dec 30 23:51:55 03Ulf Samuelsson  07ulf/atmel * r5d11692e0f 10openembedded.git/packages/linux/at91_2.6.28.bb: Remove duplicate recipe Dec 30 23:51:59 03Ulf Samuelsson  07ulf/atmel * r98c2255d63 10openembedded.git/packages/at91bootstrap/at91bootstrap_2.4/ (4 files): FIx directory name for at91bootstrap Dec 30 23:52:03 03Ulf Samuelsson  07ulf/atmel * r28c376ba3b 10openembedded.git/packages/at91bootstrap/at91bootstrap-2.4/ (4 files): Fix file name for at91bootstrap patch directory Dec 30 23:52:07 03Ulf Samuelsson  07ulf/atmel * rd0e6672bf1 10openembedded.git/packages/linux/linux_2.6.28.bb: Add recipe for 2.6.28 Dec 31 00:20:40 03Khem Raj  07org.openembedded.dev * r9ffc8b582f 10openembedded.git/packages/usbutils/usbutils_0.73.bb: usbutils_0.73: Add new recipe Dec 31 00:20:48 03Khem Raj  07org.openembedded.dev * r37032577a0 10openembedded.git/ (4 files in 3 dirs): Dec 31 00:20:48 checksums.ini: Add bluez-4.24 and usbutils 0.73 Dec 31 00:20:48 bluez-utils_4.24: New recipe Dec 31 00:22:07 03Mike Westerhof  07org.openembedded.dev * r41d9a9a324 10openembedded.git/packages/meta/slugos-packages.bb: SlugOS: slugos-packages: demote cyrus-*; victims of eabi transition. Dec 31 00:22:13 03Mike Westerhof  07org.openembedded.dev * r936956c785 10openembedded.git/conf/distro/ (include/slugos.inc slugos.conf): SlugOS: conf files - switch to EABI and newer toolchain **** ENDING LOGGING AT Wed Dec 31 02:59:58 2008