**** BEGIN LOGGING AT Fri Apr 24 02:59:57 2009 Apr 24 04:21:58 Hello, how can I disable the file checksum for the do_fetch? Apr 24 04:23:46 anyone? Apr 24 04:30:08 OE_STRICT_CHECKSUMS = 0 Apr 24 04:30:46 thanks Apr 24 04:40:51 Tartarus, I changed that in bitbake.conf, however I keep receiving a missing checksum error. Apr 24 04:40:55 any ideas? Apr 24 04:43:29 could try manually entering in the checksum data in the checksum.ini Apr 24 05:00:36 still not working... Apr 24 05:01:22 oh, nvm, I think I found the problem Apr 24 06:03:31 03Jeremy Lainé  07org.openembedded.dev * r9d54794e4e 10openembedded.git/recipes/qt4/ (qt4-tools-native.inc qt4.inc): qt4(-tools-native)?.inc: compatibility fixes for Qt 4.5.1 Apr 24 06:40:34 good morning Apr 24 06:44:18 03Jeremy Lainé  07org.openembedded.dev * rf5daa62a44 10openembedded.git/recipes/qt4/ (8 files in 2 dirs): qt4: update from 4.5.0 to 4.5.1 Apr 24 07:20:44 good morning Apr 24 07:20:52 hi Apr 24 07:21:23 03Gregoire Gentil  07org.openembedded.dev * rb4d5cf802d 10openembedded.git/recipes/mplayer/ (files/omapfb.patch files/vo_omapfb.c mplayer_svn.bb): mplayer: reenable vo_omapfb patch Apr 24 07:28:31 hello all Apr 24 07:29:25 how can I fetch sources through svn then I want use https:// instead of svn://? Apr 24 07:29:41 and i wanna ignore unsigned ssl certificate Apr 24 07:44:15 03Dmitry Eremin-Solenikov  07org.openembedded.dev * rb7f3788fa6 10openembedded.git/site/powerpc-common: Apr 24 07:44:15 site/powerpc-common: add ac_cv_va_val_copy result Apr 24 07:44:15 On powerpc it's not posible to assign va_arg by value, so Apr 24 07:44:15 cache ac_cv_va_val_copy=no Apr 24 07:44:15 Signed-off-by: Dmitry Eremin-Solenikov Apr 24 07:44:23 03Dmitry Eremin-Solenikov  07org.openembedded.dev * rc8e1d3d2d8 10openembedded.git/ (3 files in 3 dirs): Apr 24 07:44:23 u-boot: fix compilation for at91sam9g20ek boards Apr 24 07:44:24 Fix the naming of config inside machine conf file and provide a patch Apr 24 07:44:26 that make u-boot compile for at91sam9g20ek boards. Apr 24 07:44:28 Signed-off-by: Dmitry Eremin-Solenikov Apr 24 07:44:30 03Dmitry Eremin-Solenikov  07org.openembedded.dev * r66ea865ca4 10openembedded.git/: Merge branch 'org.openembedded.dev' of git@git.openembedded.net:openembedded into org.openembedded.dev Apr 24 08:06:41 g Apr 24 08:19:22 I want build a file system and change the insides of /etc/network/interfaces file. What is the right way to do this. I have tried to find the original interfaces file (in oe/recipes/netbase ??) and make a local patch for it. But I have difficulties with the patch file +++ and --- paths. I hope this is the right channel to ask this. Apr 24 08:38:28 florian: good morning Apr 24 08:46:16 webkit-efl=broke Apr 24 09:00:33 morning Apr 24 09:00:40 lrg: hi Apr 24 09:04:11 03Marcin Juszkiewicz  07stable/2009 * rba2fbd4e4e 10openembedded.git/conf/machine/bug.conf: Apr 24 09:04:11 bug: added BUG Labs device Apr 24 09:04:11 BUG is i.mx31 based device which is often called 'LEGO for IT'. Apr 24 09:04:11 More info: http://buglabs.net/ Apr 24 09:04:11 Signed-off-by: Marcin Juszkiewicz Apr 24 09:04:12 Acked-by: Koen Kooi Apr 24 09:04:17 03Marcin Juszkiewicz  07stable/2009 * r3dc18bba3b 10openembedded.git/recipes/netbase/ (netbase/bug/hosts netbase/bug/interfaces netbase_4.21.bb): Apr 24 09:04:19 netbase: added BUG support Apr 24 09:04:21 We use other network range for usb0 then OE default and this will not Apr 24 09:04:23 change soon. Also support for onboard Ethernet, Wifi module and Apr 24 09:04:25 USB-Ethernet adapters is present. Apr 24 09:04:27 Signed-off-by: Marcin Juszkiewicz Apr 24 09:04:29 Acked-by: Koen Kooi Apr 24 09:04:31 03Marcin Juszkiewicz  07stable/2009 * rc0eda6ec56 10openembedded.git/ (3 files in 3 dirs): Apr 24 09:04:34 linux-bug: added 2.6.27.2 from BUG Labs svn Apr 24 09:04:36 By default r8918 is used - can be overriden in local.conf by: Apr 24 09:04:38 SRCREV_pn-linux-bug = "${AUTOREV}" Apr 24 09:04:40 In BUG Linux we used AUTOREV by default. Apr 24 09:04:42 Signed-off-by: Marcin Juszkiewicz Apr 24 09:04:44 Acked-by: Koen Kooi Apr 24 09:04:46 03Marcin Juszkiewicz  07stable/2009 * r99cd163a8a 10openembedded.git/recipes/firmwares/ (3 files in 2 dirs): Apr 24 09:04:53 marvel-gspi-fw: added firmware for WiFi bugmodule Apr 24 09:04:53 This is firmware for not-yet-released-into-sales wifi/bt bugmodule. Apr 24 09:04:55 Signed-off-by: Marcin Juszkiewicz Apr 24 09:04:57 Acked-by: Koen Kooi Apr 24 09:08:22 is this variable used "GPE_EXTRA_INSTALL_bigscreen" ? Apr 24 09:09:31 I would ignore it Apr 24 09:14:24 hrw: morning Apr 24 09:14:25 the apps that i run when they are opened shouldnt they take the maximum size on the lcd Apr 24 09:14:41 * mckoan is touching his SeevaPlugs at last! :-D Apr 24 09:18:23 hrw: some apps appear big, i mean the icons, when i open midori, it appears really big, is there a common settings for all apps to tune thier sizes according to the lcd size Apr 24 09:18:49 mib_lvj3qtf: iirc not Apr 24 09:18:58 lrg: wm8731 - remember that chip? Apr 24 09:19:13 hrw: how is this done? Apr 24 09:19:33 hrw: yep Apr 24 09:19:45 mib_lvj3qtf: basically in x11 world fonts tunes to dpi Apr 24 09:20:23 lrg: I got question today about playing rate of it. customer had 8kHz, 44.1kHz, 88.2kHz working but not others Apr 24 09:20:56 hrw: it _should_ work at the other rates too. I wonder if it's the CPU ? Apr 24 09:21:56 hrw: pls put the customer onto Mark - he's paid to fix WM codec issues Apr 24 09:22:19 hi lrg Apr 24 09:22:24 hey pb_ Apr 24 09:22:43 pb_: going to Gran Canaria ? Apr 24 09:23:05 desktop summit Apr 24 09:24:04 lrg: at91sam9261 is used Apr 24 09:24:04 lrg: device is audio(book) player for blind Apr 24 09:24:06 lrg: ok,thx Apr 24 09:24:51 hrw: iirc at91 stuff is CPU side working well too, so it may be machine driver bug Apr 24 09:24:59 lrg: probably not, I don't think I have the time this year. Apr 24 09:25:10 so do i need to select the fonts and themes explictly, if so what themes and fonts do i need to choose? Apr 24 09:25:39 pb_: I'm short on time too :/ but I'm doubling it up as a "holiday" :) Apr 24 09:26:21 heh :-) I think I'm supposed to be going to Wales for a holiday at the end of July. Not quite so exotic. Apr 24 09:27:58 my other problem is that I will (hopefully) have a six week old daughter at the time guadec starts, and I suspect my wife will take a dim view of any extended foreign excursions. Apr 24 09:29:20 pb_: congrats :) I'm sure you will be very busy doing baby stuff at this time. We may not see you online for a while ;) Apr 24 09:30:21 ok Apr 24 09:37:32 lrg: yah, I suspect so Apr 24 09:38:36 * florian an confir that the first weeks with a baby are quite stressing Apr 24 09:38:44 huh Apr 24 09:39:04 my keyboard seems to suffer from data loss ;) Apr 24 09:41:59 which icons and themes do i need to choose for a vga lcd Apr 24 09:42:09 and fonts too Apr 24 09:42:56 because i feel the some apps appear too big Apr 24 09:43:16 and thier icons and the way they look are big for a vga lcd small lcd Apr 24 09:57:41 hello Apr 24 09:58:05 hi Apr 24 09:58:49 i am building oe (angstrom for ipaq h1940) on my red hat 5 as non-root, and getting these for all .bb files: ERROR: Could not inherit file classes/*.bbclass Apr 24 09:59:35 the sanity checker curses only about /proc/sys/vm/mmap_min_addr so i have touch build/conf/sanity.conf Apr 24 10:00:38 wrong BBPATH then Apr 24 10:01:10 if i add BBPATH to local.conf, sanity checker curses all the time (but not about BBPATH) Apr 24 10:01:12 you mean BBFILES ? Apr 24 10:01:31 i have set it to .../openembedded/recipes/*/*.bb Apr 24 10:01:43 no, I meant BBPATH Apr 24 10:02:15 it is env variable which keeps paths to build dir and oe metadata so bitbake know where to look for conf and classes directories Apr 24 10:02:24 aw it's an env(!) Apr 24 10:02:34 export BBPATH=path-to-build-dir:path-to-oe-dir Apr 24 10:03:03 ok Apr 24 10:03:06 i have it like this: Apr 24 10:03:11 BBPATH=build:openembedded Apr 24 10:03:20 you need FULL path Apr 24 10:03:26 no relative?. Apr 24 10:03:28 ok Apr 24 10:03:29 got it Apr 24 10:04:01 (dam logical %)) Apr 24 10:04:05 ;D Apr 24 10:04:08 where's my head at!? :D Apr 24 10:04:40 ok, the eagle has been launched! :D Apr 24 10:05:06 ping mckoan Apr 24 10:07:10 hi gremlin[it] Apr 24 10:07:21 hi hrw ! Apr 24 10:09:34 pong gremlin[it] Apr 24 10:09:49 mckoan, hi have sheevaplug in my hand :) Apr 24 10:10:04 mckoan, 25EUR of tax for 2 sheeva Apr 24 10:11:00 gremlin[it]: me too :-D Apr 24 10:11:17 03Roman I Khimov  07org.openembedded.dev * rd03984dc6e 10openembedded.git/ (3 files in 2 dirs): sqlite3: add version 3.6.13 Apr 24 10:11:23 mckoan, goooooooood Apr 24 10:11:49 gremlin[it]: I wonder how they can get 200 USD and send an invoice for 40 USD Apr 24 10:12:14 * XorA needs to sneak into italy now :-) Apr 24 10:12:17 mckoan, gghhghgh I prefear this way :) Apr 24 10:13:15 gremlin[it]: I thought that tax evasion was only an italian quality Apr 24 10:13:47 mckoan: when you order? I want to calculate when I can get mine ;D Apr 24 10:14:01 hrw, me 30 MArch Apr 24 10:14:10 so did I Apr 24 10:14:13 gremlin[it]: and I wonder I can file 40 USD invoice when I spet 200 Apr 24 10:15:33 mckoan, isn't an invoice .. is just a value of the goodie for who carry it ... we already pay it before was shipped Apr 24 10:16:27 gremlin[it]: the white paper is titled "Commercial invoice ECI" Apr 24 10:17:30 gremlin[it]: anyway I can't do nothing for that, let's look at the half-full glass: Shheva is here Apr 24 10:20:46 mckoan, for me isn't a problem i'm a normal guy, not a company ;) Apr 24 10:21:17 * mckoan -> taking daughter at school :-) Apr 24 10:23:31 can i ask bitbake not to download from ftp sources, only http? Apr 24 10:23:48 I ordered 24th of May, I emailed them complaining that two Italian guys got their plug BEFORE I DID (just kidding), and they now send me 3 units as ordered Apr 24 10:23:53 mckoan, see u later Apr 24 10:24:59 likewise, hahahahh really ? Apr 24 10:27:04 gremlin[it]: well, I wrote this: "I noticed two ppl who ordered one week later already have a FedEx tracking number, I'm in anticipation :-)" Apr 24 10:27:35 gremlin[it]: they wrote back: "... You will receive FedEx tracking # within next 24 hours to your email. ..." Apr 24 10:27:56 with appologies etc. and excuse they didn't expect the demand Apr 24 10:28:49 likewise, hahahah ... really ... i wrote about a mail for week to globalscale ... Apr 24 10:35:02 I'd like to report a bug. Current netsurf-svn.bb won't package Apr 24 10:35:39 I'd like to report another bug, snes9x won't even compile Apr 24 10:37:01 btw, I do have the current git tree Apr 24 10:37:59 HaveAHennessy: http://bssvn.buglabs.net/svn/!revision/8947 can interest you Apr 24 10:38:10 ops Apr 24 10:38:16 wrong channel Apr 24 10:39:40 how can i indicate bitbake to use only my preferred mirrors for downloading sources? Apr 24 10:40:03 i have selected gpe - image + some gnome apps like gneumeric, abiword, claws mail, i am not sure which fonts or themes i should select, can anyone help me on this Apr 24 10:40:37 cause i see that some of these appear too big, icons are big, for example midori when opens a web page, the letters are too big for a small lcd Apr 24 10:40:59 similarly abiword Apr 24 10:41:39 where are packages placed once they are built? Apr 24 10:41:41 hrmm, is beagle suffering from the DPI hack still? Apr 24 10:42:15 I just bitbaked pidgin, where can I find it. lol. It's my first attempt at building a package. Sorry for the noob question Apr 24 10:42:34 tmp/deploy/glibc/ipk/* Apr 24 10:42:42 alright, thanks Apr 24 10:44:47 I want build a file system with Angstrom/OpenEmbedded and change the insides of /etc/network/interfaces file. What is the right way to do this. I have tried to find the original interfaces file (in openembedded/recipes/netbase/netbase ??) and make a local patch for it. But I have difficulties with the patch file +++ and --- paths. I hope this is the right channel to ask this. Apr 24 10:46:05 paavop_: what you need to change? Apr 24 10:46:25 paavop_: is change related to your target device (MACHINE in OE terminology)? Apr 24 10:47:21 just now I try to change eth0 to static, but in general, I try to find out the right way to make these local patches to files like interfaces Apr 24 10:47:50 paavop_: mkdir netbase/netbase/NAME-OF-YOUR-MACHINE/ and put it there Apr 24 10:47:58 it = interfaces file Apr 24 10:49:52 I have made a parallel oe tree where i have my recipes, could I put it somewhere into that tree Apr 24 10:49:55 hrw: do you know the fonts and themes i need to select, cause some apps appear bigger in midori the text size is very big and similarly in abiword things are bigger Apr 24 10:50:07 sorry for pinging you, i am new to this Apr 24 10:50:30 I am not x11 level guy Apr 24 10:50:54 mib_lvj3qtf: check in /etc/X11/xsession.d and see if there is some script called *DPI* Apr 24 10:51:11 mib_lvj3qtf: if there is, try removing it and seeing if your fonts turn to normal Apr 24 10:51:53 it might be in /etc/X11/xinit.d as well Apr 24 10:51:58 I dont have a rootfs handy Apr 24 10:58:54 So, I searched for the pidgin ipk that I just built, however it is no where to be found... Apr 24 10:59:21 I searched in /tmp/ with find | grep pidgin*.ipk which found nothing Apr 24 10:59:51 any ideas? Apr 24 11:00:04 try *pidgin*.ipk Apr 24 11:00:59 nope Apr 24 11:01:12 hrw: what to mean by x11 level guy what are the other choices you have? does not everything depend on x Apr 24 11:01:13 jnoah19841: find -name *pidgin* will save you grep use Apr 24 11:01:34 mib_lvj3qtf: I spent most of time in build area and on serial lines Apr 24 11:01:56 mib_lvj3qtf: my beagleboard here does not even have hdmi connected to lcd panel Apr 24 11:03:00 hrw: i do the same here Apr 24 11:03:44 these things fonts, themes are new to me, i dont know what to choose, im just trying to get attention. i tried mix and match and try out lots of images, im going wrong some where Apr 24 11:03:57 hrw: i have beagle, evm Apr 24 11:04:23 I have my ipk:s in /OE/stuff/angstrom-dev/deploy/glibc/ipk/at91sam9261ek. I use Angstrom, ipk:s go under deploy-directory Apr 24 11:05:47 and the packages are created when a successful 'package packagename' is completed, correct? Apr 24 11:06:19 I am using angstrom as well, btw Apr 24 11:08:31 i get lots of messages such as http://pastebin.ca/1401773 Apr 24 11:08:46 I think so. If you get 0 failed, the packages should be there. At least I get them in that situation. Apr 24 11:09:41 weird... Apr 24 11:10:05 All other packages are there, just not pidgin, and it completed successfully. Apr 24 11:11:46 Where can be problem? here's screen: http://parduoduv.puslapiai.lt/ (in top)? What i need to do to solve it?? Apr 24 11:13:32 oh well, It's 04:15 where I am (gmt-8). Going to head to bed. Maybe a bit of sleep will help. thanks for your help anyway! Apr 24 11:13:34 night Apr 24 11:34:16 hi knows anzone something about how to connect an zaurus with usb and 2.6 kernel ? whats to use , usbnet? g_ether ? zaurus ? i think there are more then 4 diffrent solutions Apr 24 11:37:55 pwgen: g_ether on zaurus, usbnet on target Apr 24 11:38:02 pwgen: wiki.openzaurus.org has doc Apr 24 11:38:16 ->food Apr 24 11:43:42 pwgen: luckilly there is only one working solution :-) Apr 24 11:43:59 hrw: usb network seems a bit crappy ... nothing works , i got only pxa2xx-udc: USB reset on my zaurus .. the host does nothing ( networking works with openmoko on same host ) Apr 24 11:55:46 which one is preferred udev or mdev Apr 24 11:58:46 udev is more flexible, mdev is simple and fast Apr 24 12:00:29 hmm angstrom-2008-prefered-versions uses '=' for version. How can I override that, short of editing the file itself ? Apr 24 12:05:33 pwgen: no idea - I do not use my zaurus anymore Apr 24 12:12:05 grmpl ... i should try networking over the serial line. or repair my usb host cable and use an usb to 10 mbit adapter ... Apr 24 12:25:50 xora: how do i choose one udev/mdev Apr 24 12:26:16 mib_lvj3qtf: you seem to be a beginner so use the default of udev Apr 24 12:27:04 udev gives me lots of error messages like >end_request: I/O error, dev mtdblock0, sector 0 Apr 24 12:27:12 >uncorrectable error : uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 8 Apr 24 12:27:50 mib maybee you cleanered the mtd partinion no enough Apr 24 12:28:03 otherwise a failure on the card can it be too Apr 24 12:40:53 why first time boot takes lots of time Apr 24 12:41:30 read the boot log, you'll see why Apr 24 12:44:17 mib first config of the packages Apr 24 12:44:24 and creating ssh-key Apr 24 13:15:25 morning all Apr 24 13:16:29 mib_lvj3qtf: beagleboard? Apr 24 13:18:32 hi everyone Apr 24 13:18:43 I just found out about this beagleboard thing.. Apr 24 13:19:56 there is a dvi-d connector availiable, but can could I also connect a vga screen to it? Apr 24 13:20:26 virk: nope Apr 24 13:21:26 oww, that's a pitty Apr 24 13:23:38 hrw: yes Apr 24 13:23:41 hey RP Apr 24 13:27:12 are dropbear and openssl and openssh related and should i choose any one of them? Apr 24 13:27:27 sorry openssh-scp and openssh Apr 24 13:28:26 dropbear is a much simpler implementation of ssh Apr 24 13:28:47 dropbear is a server Apr 24 13:28:50 correct? Apr 24 13:28:54 and client Apr 24 13:28:58 both Apr 24 13:29:02 yes Apr 24 13:29:15 openssh if you need to do complex ssh stuffs, dropbear otherwise Apr 24 13:29:17 so if i include dropbear i should be able to transfer file and connect to other systems Apr 24 13:29:50 yes Apr 24 13:30:00 BTW are you not using the standard images? Apr 24 13:30:43 no i am trying to make custom bb files Apr 24 13:30:56 mib_lvj3qtf: drop MTD from kernel config Apr 24 13:36:25 hrw: i need to store something on nand Apr 24 13:36:46 mib_lvj3qtf: then live with mtd errors in udev phase Apr 24 13:47:46 hrw: you got a evm? Apr 24 13:48:57 will bitbake build as well the kernel if i am baking opie-image for h1940 machine (angstrom distro)? Apr 24 13:54:07 does someone has Quake running on the OMAP3EVM ? Apr 24 13:56:12 i can try if you want to Apr 24 13:56:19 may be an hour later Apr 24 13:56:34 royerfa: are you observing some kind of slowness Apr 24 13:58:27 No actually I would like to test it on the EVM board Apr 24 13:58:38 but I am not sure how to build it !! Apr 24 13:59:42 bitbake quake? Apr 24 14:00:51 yes Apr 24 14:07:47 03Steffen Sledz  07org.openembedded.dev * rf39b6e0d80 10openembedded.git/recipes/linux/ (3 files in 3 dirs): linux-2.6.24: make ubifs available for all machines Apr 24 14:13:50 I don't understand what is bitbake ? Apr 24 14:15:12 bitbake is a command/tool which operates on a bitbake file (just like make which operates on a makefile) Apr 24 14:16:04 ok Apr 24 14:16:25 is machine name always appened to the generated file system? Apr 24 14:17:53 Is there a OE OMAP3EVM filesystem with Quake in it ? Apr 24 14:18:36 no, but i guess you can instrall the binaries through opkg Apr 24 14:19:07 read opkg docs on how you can install a package Apr 24 14:20:56 Bah Apr 24 14:21:15 Doing a big loop of bitbake -g on all of the distro conf files shows some are in bad shape :| Apr 24 14:21:26 makes confirming that my big changes are fine Apr 24 14:34:54 Tartarus: other question is which images are used by wich distro Apr 24 14:36:14 how can i add a default player to every mp4 file i have in my file system? Apr 24 14:36:23 adding mime-types will do? Apr 24 14:37:52 ant_work, yeah, but i'm happy I don't think I need that Apr 24 14:38:00 adding PREFERRED_LIBC to everyboard Apr 24 14:38:13 with an OVERRIDES added in too Apr 24 14:38:28 Tartarus: what's bad is in some images/recipes there are weak assignments...supposedly the distro takes care of all..but it is not always the case Apr 24 14:38:55 in some cases end result is defaulting to base.bbclass Apr 24 14:40:19 re Apr 24 14:40:40 mib_lvj3qtf: no, I have only beagleboard/b7 (when it comes to omap3) Apr 24 14:43:36 * Tartarus fixes up some of the older glibc recipes to provide things they need to and redoes bitbake -g minimal-image meta-toolchain for nslu2{be,le} & beagleboard for all distros Apr 24 14:46:57 <_diego_> how can i use eglibc instead glibc for build Apr 24 14:47:09 _diego_, what distro? Apr 24 14:47:19 <_diego_> angstrom Apr 24 14:47:28 ANGSTROMLIBC=eglibc bitbake ... Apr 24 14:48:14 <_diego_> uhm, there is a way to set it in local.conf? Apr 24 14:48:49 i have not root access: so i cannot execute "echo 0 > /proc/sys/vm/mmap_min_addr" -- is there a way to get around this?... Apr 24 14:48:59 i get permission denied for mmap whenever i try to build locales Apr 24 14:49:30 _diego_: you can set that in local.conf too Apr 24 14:50:33 <_diego_> so can i add "ANGSTROMLIBC=eglibc" to local.conf Apr 24 14:50:57 yes Apr 24 14:51:31 <_diego_> thanks Apr 24 14:55:48 <_diego_> should i use PREFERRED_VERSION_glibc or PREFERRED_VERSION_eglibc? Apr 24 14:56:04 none of them Apr 24 14:56:13 ANGSTROMLIBC=eglibc should be enough Apr 24 14:56:24 Can someone point me to the Quake sources ... I am struggling to find it Apr 24 14:57:00 royerfa: cd oe/recipes/quake/; use less to read recipes and check SRC_URI Apr 24 15:15:09 hrw: do you know if the source of Quake in the OE project have been modified compare to the original Quake source tree ? Apr 24 15:16:05 never looked Apr 24 15:16:23 but 90% sure that it was ;D Apr 24 15:24:18 03Angus Ainslie  07org.openembedded.dev * r8b680b2a9a 10openembedded.git/recipes/ (python/python-evas_svn.bb tasks/task-openmoko-feed.bb): python-evas: make sure all headers are staged for dependencies Apr 24 15:24:20 03Michael 'Mickey' Lauer  07org.openembedded.dev * r8101ad8e12 10openembedded.git/recipes/efl1/ecore.inc: ecore: catch up with the new SONAMEs; move to autosplitting Apr 24 15:24:21 03Michael 'Mickey' Lauer  07org.openembedded.dev * r80c85e0af3 10openembedded.git/recipes/efl1/ (evas-native_svn.bb evas.inc evas_svn.bb): evas: catch up with new upstream library names; bump version string Apr 24 15:24:25 03Angus Ainslie  07org.openembedded.dev * rdf48726ac9 10openembedded.git/ (conf/checksums.ini recipes/fltk/fltk2_svn.bb): fltk2: add an svn recipe for the beta version of fltk library Apr 24 15:24:26 03Angus Ainslie  07org.openembedded.dev * r5eb5ade092 10openembedded.git/recipes/fltk/fltk2_svn.bb: fltk2 : ship all of the libs Apr 24 15:24:31 03Michael 'Mickey' Lauer  07org.openembedded.dev * r263bfd158d 10openembedded.git/recipes/fltk/ (files/fix-it-damnit.patch fltk2_svn.bb): Apr 24 15:24:31 fltk2: make it somewhat work; still very hacky, since these people Apr 24 15:24:31 try to be very clever with their multiplatform buildsystem... *sigh* Apr 24 15:29:07 I am editing the build/conf/local.conf for the 1st time, what machine should I use for the OMAP3EVN target ? Apr 24 15:31:05 I get it Apr 24 15:35:36 03Michael 'Mickey' Lauer  07org.openembedded.dev * r6898f8ca08 10openembedded.git/recipes/efl1/ (7 files): efl: sync versions with upstream Apr 24 15:37:41 03Michael 'Mickey' Lauer  07fso/milestone5.5 * r88d85b3734 10openembedded.git/recipes/fltk/ (files/fix-it-damnit.patch fltk2_svn.bb): Apr 24 15:37:41 fltk2: make it somewhat work; still very hacky, since these people Apr 24 15:37:41 try to be very clever with their multiplatform buildsystem... *sigh* Apr 24 15:42:18 i have given 2.6.28 as the preferred kernel, but for some reason it tries to configure for 2.6.29 and loads the kernel and modules in there Apr 24 15:42:21 how do i avoid it Apr 24 15:45:08 hi everyone Apr 24 15:46:57 I am planning to deploy several embedded systems, (all the same), with on every single one the same root filesystem Apr 24 15:47:30 what is the most comfortable application to play mp3 files for gpe ? Apr 24 15:48:03 However, from time to time, I would like to update them, or change some settings on them, but there is no logic on the time these changes are done Apr 24 15:48:14 So, yayay Apr 24 15:48:29 Finally confirmed I have enough stuff building as should build in my stable/2009 sdk updates Apr 24 15:48:57 It's a user preference, it can be everyweek, or with a month in between and so on Apr 24 15:49:36 I wanted to wite some app for it that would connect to them through ssh and then fire some commands, but is this the way it should be done? Apr 24 15:49:57 I think there must be a more professional way to manage a bunch embedded systems Apr 24 15:50:45 Is there anyone who knows how this is generally done? Apr 24 15:54:14 virk: do you have a "cluster" of embedded system or different installations on one system ? Apr 24 15:54:36 it would be a cluster Apr 24 15:55:16 I haven't bought em yet ;) Apr 24 15:55:55 virk: maybe you can call opkg update; opkg upgrade with ssh ? Apr 24 15:56:17 yes, I was thinking about such a system Apr 24 15:56:28 when i start abiword i get a message saying no dbus daemon running Apr 24 15:56:34 i have enabled dbus in my .bb file Apr 24 15:57:05 pwgen: the problem is that I am not really sure this is the "right" way Apr 24 15:57:25 virk: make your own build system and publish BUILDROOT/tmp/deploy/... /ipk with an webserver Apr 24 15:59:46 virk: then you can write a little cron script that updates all system, if needed you can build your own package that does special configuration for your system Apr 24 16:00:07 pwgen: the problem with these ssh commands is that they get there ip addresses through dhcp, so I don't know which ip addresses will be in use, and which not. One thing that can be helpfull is that for this batch deploy, this cluster will most likely be in the same subnet Apr 24 16:01:13 pwgen: but cron scripts let stuff run from time to time, and I do not think that is desired Apr 24 16:03:01 virk: your problems are more linux related and not openembedded. you can look at some solutions that handels your problem Apr 24 16:04:37 pwgen: yeah, when I think of it, it is indeed more of a linux issue rather than openembedded. I did'nt exactly know where to ask this Apr 24 16:04:38 virk: an avahi and dns/dhcp setup, that assigns dnsnames to the embedded system will made them reachable by ssh Apr 24 16:05:55 hmm, avahi seems like a nice start Apr 24 16:05:57 thanks a lot Apr 24 16:06:01 virk: FAI does maybe what you want ( software distribution ) for debian Apr 24 16:08:15 morning Apr 24 16:08:59 'afternoon :) Apr 24 16:09:17 ~ugt Apr 24 16:09:19 it has been said that ugt is Universal Greeting Time. Created in #mipslinux, it is a rule that states that whenever somebody enters an IRC channel it is always morning, and it is always late when the person leaves. The local time of any other people in the channel, including the greeter, is irrelevant. http://www.total-knowledge.com/~ilya/mips/ugt.html Apr 24 16:09:29 pwgen: thanks, FAI may prove to be useful Apr 24 16:10:03 kergoth: haha, didn't know that :) Apr 24 16:10:08 :) Apr 24 16:19:07 03Jeremy Lainé  07org.openembedded.dev * rb4e0df20e3 10openembedded.git/recipes/qt4/qt4.inc: Apr 24 16:19:07 qt4.inc: add translation packages to the dynamic list Apr 24 16:19:07 From: Otavio Salvador Apr 24 16:19:07 Signed-off-by: Otavio Salvador Apr 24 16:19:07 Acked-by: Jeremy Lainé Apr 24 16:22:56 heh, silly git format-patch Apr 24 16:23:08 03Jan Lübbe  07fso/milestone5.5 * r861704a7ad 10openembedded.git/conf/distro/include/sane-srcrevs.inc: sane-srcrevs.inc: bump frameworkd and zhone Apr 24 16:23:12 git format-patch --subject-prefix="PATCH][STABLE" origin/stable/2009 is what i need it seems Apr 24 16:23:57 I edit subjects by hand Apr 24 16:24:10 Tartarus: add "-s" to add signed-off-by line Apr 24 16:28:47 I have got this error when trying to use bitbake Apr 24 16:28:49 fabroy01@fabroy01-desktop:~/oe/stuff$ bitbake nano Apr 24 16:28:49 ERROR: Read the comments in your conf/local.conf Apr 24 16:28:49 NOTE: :1 while evaluating: Apr 24 16:28:49 ${@bb.fatal('Read the comments in your conf/local.conf')} Apr 24 16:29:24 I just finnish editing my conf/local,conf and don't know where the eroor is comming from ? Apr 24 16:29:29 =-O Apr 24 16:29:47 you did not read that enough Apr 24 16:30:00 Possible Apr 24 16:30:33 it is smth with the comment # followed by a space Apr 24 16:31:18 basically drop most of local.conf.sample Apr 24 16:31:28 you need DISTRO/MACHINE/BBFILES - nothing more Apr 24 16:32:22 for the omap3 I need to give the libc path I guess as welll Apr 24 16:32:41 no need for more then I told Apr 24 16:35:38 ok I forgot to remove the last line ... Apr 24 16:35:53 03Angus Ainslie  07fso/milestone5.5 * r4cea062a6c 10openembedded.git/recipes/ewww/ewww_git.bb: ewww : fix git download protocol Apr 24 16:36:03 03Angus Ainslie  07fso/milestone5.5 * r44810fca11 10openembedded.git/recipes/webkit/webkit-efl_git.bb: webkit-efl : fix git fetch branch, WORKDIR and use autogen.sh to configure from git Apr 24 16:36:04 03Angus Ainslie  07fso/milestone5.5 * r028d97c90c 10openembedded.git/: Merge branch 'fso/milestone5.5' of git@git.openembedded.net:openembedded into fso/milestone5.5 Apr 24 16:37:44 have anybody some clue about this 'sh: rm: command not found'? Apr 24 16:37:58 where to look for source of this problem? Apr 24 16:38:57 bitbake coreutils-native? Apr 24 16:41:12 hrw: strange that is is not built by default.. Apr 24 16:41:43 * Tartarus preemptivly appologizes for CIA spam Apr 24 16:41:46 I have that error in do_setscene of navit Apr 24 16:43:56 Or maybe it doesn't spam on new branches, heh Apr 24 16:48:11 does anyone tried to build a kernel for the PSP with oe ? http://jacksonm80.googlepages.com/linuxonpsp.htm Apr 24 17:00:03 royerfa: what was the libc path you specify in local.conf? I have many notes from bitbake that it can't find libc.so.6 etc. Apr 24 17:01:00 hrw: coreutils-native does not fix this :) Apr 24 17:01:15 hopefully this is not fatal error, just message Apr 24 17:01:48 ASSUME_PROVIDED += "/home/fabroy01/CodeSourcery/Sourcery_G++_Lite/arm-none-linux-gnueabi/libc" Apr 24 17:02:04 this is the codesourcery gcc compiler Apr 24 17:03:11 Actually I am having the error Apr 24 17:03:12 fabroy01@fabroy01-desktop:~/oe/stuff/openembedded/recipes/nano$ bitbake nano Apr 24 17:03:12 ERROR: Openembedded's config sanity checker detected a potential misconfiguration. Apr 24 17:03:12 Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Apr 24 17:03:12 Following is the list of potential problems / advisories: Apr 24 17:03:12 Using dash as /bin/sh causes various subtle build problems, please use bash instead. Apr 24 17:03:27 excellent. Thanks. I thought the ASSUME_PROVIDED += "virtual/${TARGET_PREFIX}gcc virtual/libc" would be enough, but I guess not (lib path thing?) Apr 24 17:03:53 And I am using ubuntu 8.10 Apr 24 17:04:08 royerfa: what do you see from 'ls -l /bin/sh' ? Apr 24 17:05:12 fabroy01@fabroy01-desktop:~/oe/stuff/openembedded/recipes/nano$ ls -l /bin/sh Apr 24 17:05:12 lrwxrwxrwx 1 root root 4 2009-01-12 13:37 /bin/sh -> dash Apr 24 17:07:00 there's a magic ubuntu package which will change sh -> dash to sh -> bash (can't recall package name) Apr 24 17:07:19 dpkg-reconfigure dash Apr 24 17:07:36 ok Thx , now it lokks to work ;-) Apr 24 17:07:48 that's it Apr 24 17:07:53 thanks Apr 24 17:11:03 Do I need to use this flags BUILD_CPPFLAGS += "-Wno-format-security -U_FORTIFY_SOURCE" Apr 24 17:19:37 03Jeremy Lainé  07org.openembedded.dev * r1b53dc3863 10openembedded.git/recipes/qt4/ (3 files): Apr 24 17:19:37 Author: Otavio Salvador Apr 24 17:19:37 Signed-off-by: Otavio Salvador Apr 24 17:19:37 Acked-by: Jeremy Lainé Apr 24 17:28:55 03Jeremy Lainé  07org.openembedded.dev * re4e2ef1a09 10openembedded.git/recipes/qt4/qt4-tools-native.inc: qt4-tools-native.inc: add qdbuscpp2xml to Qt native tools Apr 24 17:51:50 03Jeremy Lainé  07org.openembedded.dev * rfce876f33d 10openembedded.git/ (classes/qmake2.bbclass recipes/qt4/files/linux.conf): Apr 24 17:51:50 qmake2.bbclass: add OE_QMAKE_QDBUSXML2CPP and OE_QMAKE_QDBUSCPP2XML Apr 24 17:51:50 From: Otavio Salvador Apr 24 17:51:50 Signed-off-by: Otavio Salvador Apr 24 17:51:50 Acked-by: Jeremy Lainé Apr 24 18:13:41 have a nice weekend Apr 24 18:17:14 woglinde: Hi I added the kmem kernel patch to linux_2.6.29+2.6.30-rc1.bb and it seems to apply/build the kernel ok, but libgles build fails with "trace/kmem.h: No such file or directory". Trying to understand how libgles gets its headers... Apr 24 18:18:10 hoj I am just now dowloand the sdk from ti Apr 24 18:18:25 and then I will test it with beagleboard build Apr 24 18:19:14 cool. Does bitbake produce a more verbose log somewhere versus just the tail of the last build problem? Apr 24 18:19:34 hm the error is clear Apr 24 18:19:50 kmem.h is needed Apr 24 18:20:05 have to wait one hour until the download is finished Apr 24 18:20:08 *sigh* Apr 24 18:21:09 This http://patchwork.kernel.org/patch/17965//kmem should add kmem.h, right? Apr 24 18:22:40 hoj hm the url is broken Apr 24 18:23:08 oops http://patchwork.kernel.org/patch/17965/ Apr 24 18:23:13 Hmm Apr 24 18:23:23 Did my sdk/stable updates make it out yet? Apr 24 18:23:43 yeah, there they are in patchwork Apr 24 18:23:44 hmm Apr 24 18:23:50 hoj hm yes seems so Apr 24 18:25:11 it almost seems that the kernel build uses the patch, but the module build has different headers. Does the module build just point to the extracted/patched kernel source? Apr 24 18:25:32 hoj hm should Apr 24 18:25:38 I will see it in an hour Apr 24 18:25:57 maybee the patch isnt installed to the stagedir of the kernel Apr 24 18:26:18 hoj you could do a find oetmp/work/arch -name "kmem.h" Apr 24 18:30:06 woglinde: "find build/tmp/work/armv7a-angstrom-linux-gnueabi -name kmem.h" produced nothing (also looked in build/tmp/staging/omap3evm-angstrom-linux-gnueabi/kernel) hmm. Apr 24 18:31:27 [denix], ping Apr 24 18:32:29 hello Apr 24 18:32:35 woglinde: did find build/tmp/work/omap3evm-angstrom-linux-gnueabi/linux-2.6.29+2.6.30-rc1-r1/linux-2.6.29/include/trace/kmem.h Apr 24 18:32:50 has anyone managed to get xcalibrate extention working on xorg? Apr 24 18:33:50 hoj okay then the header is not installed Apr 24 18:33:59 into staging Apr 24 18:35:24 args Apr 24 18:35:25 sorry Apr 24 18:35:34 I gave the false search path Apr 24 18:35:48 oetmp/staging/$arch Apr 24 18:44:30 45 minues to go Apr 24 19:00:33 did someone packages hal-cups-utils? Apr 24 19:20:44 Is there a bitbake way to show what oe targets are available? Apr 24 19:22:57 hoj I found an intesstring discussion about the gles stuff Apr 24 19:23:00 http://www.beagleboard.org/irclogs/index.php?date=2009-02-20 Apr 24 19:30:39 hi pb Apr 24 19:30:53 hoj hm for the beagleboard it compiled here without problems Apr 24 19:32:12 woglinde: did you add a kernel patch +/or use PREFFERED_VERSION_linux-omap in local.conf? Also, what toolchain? Apr 24 19:32:57 hoj I just type bitbake linux-omap Apr 24 19:33:41 then bitbake omap3-sgx-modules and bitbake libgles-omap3 Apr 24 19:33:46 re Apr 24 19:34:00 jo florian Apr 24 19:34:23 03Leon Woestenberg  07org.openembedded.dev * r77ac27793a 10openembedded.git/contrib/mtn-bisect.sh: contrib/mtn-bisect.sh: Removed, we moved to git which has bisect itself. Apr 24 19:36:02 woglinde: maybe I need to start from scratch or build for beagleboard as sanity check Apr 24 19:37:51 hoj hm maybee Apr 24 19:37:59 best way to clean? 'rm -rf build/tmp'? Apr 24 19:38:06 yeah Apr 24 19:38:21 k. Thanks Apr 24 19:38:26 do you have a fast buildmachine? Apr 24 19:38:38 hm by the way I am using uclibc Apr 24 19:38:41 as libc Apr 24 19:38:55 but this has nothing to do with the problem Apr 24 19:40:58 woglinde: medium-fast machine. I did see "NOTE: Couldn't find shared library provider for libc.so.6" when building libgles, so something is not quite right build env-wise Apr 24 19:41:15 oh Apr 24 19:41:20 yes seems so Apr 24 19:43:32 woglinde: How does bitbake find toolchain glibc? I installed CodeSourcery arm-2008q1 in /opt Apr 24 19:44:01 oh so you are using not a toolchain build from oe Apr 24 19:44:11 correct Apr 24 19:44:28 why? Apr 24 19:44:36 heh Apr 24 19:44:42 Using the full CS toolchain is hard Apr 24 19:44:44 Doable, but hard Apr 24 19:44:59 want reproducable build env Apr 24 19:45:11 then its clear why its failing Apr 24 19:45:23 to much stuff outside from oe Apr 24 19:45:57 hoj, remind me later and I can pastebin a "shove it all into OE" recipe I made up some time ago Apr 24 19:46:04 but you could have mentione this little detail a little bit earlier Apr 24 19:46:45 doesn't like external tools eh? woglinde: sorry, using external toolchain seemed "normal" to me Apr 24 19:47:02 nope Apr 24 19:47:13 external toolchain gives often headaches Apr 24 19:47:22 I see :) Apr 24 19:47:56 but I think we have the 2008q1 compiler anyway in Apr 24 19:48:00 let me see Apr 24 19:48:17 yepp Apr 24 19:48:18 gcc-cross-intermediate_csl-arm-2008q1.bb Apr 24 19:48:21 so you recommend removing ASSUME_PROVIDED* stuff from local.conf, and building tools from source, eh? Apr 24 19:48:28 right Apr 24 19:48:30 mom Apr 24 19:49:41 you have to set something according to this in your local.conf Apr 24 19:49:43 PREFERRED_VERSION_gcc = "3.4.4cs2005q3.2" Apr 24 19:49:43 PREFERRED_VERSION_gcc-cross = "3.4.4cs2005q3.2" Apr 24 19:49:43 PREFERRED_VERSION_gcc-cross-initial = "4.1.1" Apr 24 19:49:43 PREFERRED_VERSION_gcc-cross-intermediate = "4.1.1" Apr 24 19:49:45 #PREFERRED_VERSION_gcc-cross-initial = "3.4.4cs2005q3.2" Apr 24 19:50:05 03Angus Ainslie  07fso/milestone5.5 * r3914594c6d 10openembedded.git/recipes/openmoko-projects/paroli_git.bb: paroli: fix-up shipped theme Apr 24 19:50:55 woglinde: also rm TARGET_PREFIX from local.conf? Apr 24 19:51:37 hm what did you set it? Apr 24 19:51:51 TARGET_PREFIX = arm-none-linux-gnueabi- Apr 24 19:51:59 yes Apr 24 19:52:13 that will be set up automagicly Apr 24 19:52:25 ok Apr 24 19:54:36 woglinde: thanks for the vector. building...... Apr 24 19:54:52 hoj hm 4.2.3+csl-arm-2008q1-126 seems to be the version Apr 24 19:56:50 woglinde: so: Apr 24 19:56:50 PREFERRED_VERSION_gcc = "4.2.3+csl-arm-2008q1-126" Apr 24 19:56:50 PREFERRED_VERSION_gcc-cross = "4.2.3+csl-arm-2008q1-126" Apr 24 19:56:50 PREFERRED_VERSION_gcc-cross-initial = "4.1.1" Apr 24 19:56:50 PREFERRED_VERSION_gcc-cross-intermediate = "4.1.1" Apr 24 19:56:51 ? Apr 24 19:58:02 hm yes Apr 24 19:58:05 try it Apr 24 19:58:55 ehh.. Apr 24 19:59:18 * Jay7 want to refuse further php-programming Apr 24 19:59:18 ok Apr 24 20:01:18 hhe Apr 24 20:01:24 jay7 good decision Apr 24 20:01:41 woglinde: yeah :) Apr 24 20:01:51 s/php-programming/php-scripting/ Apr 24 20:02:36 but it's most easy-to-get payed work.. Apr 24 20:04:27 *G* try .NET ...uhh shouder .. Apr 24 20:04:35 no, thanks :) Apr 24 20:09:10 03Denys Dmytriyenko  07stable/2009 * r4b1341d8b3 10openembedded.git/recipes/udev/ (udev-124/libvolume-id-soname.patch udev_124.bb): Apr 24 20:09:10 udev 124: fix the absolute soname link in libvolume for SDK Apr 24 20:09:10 Signed-off-by: Denys Dmytriyenko Apr 24 20:09:10 Acked-by: Koen Kooi Apr 24 20:09:20 03Denys Dmytriyenko  07stable/2009 * r1f4b0ee779 10openembedded.git/recipes/udev/ (udev-124/default udev-124/init udev_124.bb): (log message trimmed) Apr 24 20:09:20 udev 124: add cache invalidation logic on kernel change or its bootargs/cmdline/atags Apr 24 20:09:20 also add /etc/default/udev with the option to disable device caching Apr 24 20:09:20 Signed-off-by: Denys Dmytriyenko Apr 24 20:09:22 Acked-by: Tom Rini Apr 24 20:09:24 Acked-by: Koen Kooi Apr 24 20:09:26 Signed-off-by: Koen Kooi Apr 24 20:14:08 03Cliff Brake  07org.openembedded.dev * r23ac197703 10openembedded.git/recipes/linux/ (8 files in 2 dirs): linux-2.6.29: update cm-x270 kernel to 2.6.29 Apr 24 20:22:26 jo ant Apr 24 20:22:46 hey woglinde :) Apr 24 20:23:13 kids at sleep? Apr 24 20:23:23 yeah, wife too Apr 24 20:23:28 uh? Apr 24 20:23:34 thats early Apr 24 20:23:48 she's very 'belastet' Apr 24 20:23:55 hm okay Apr 24 20:27:45 ant__: morning :) Apr 24 20:28:06 ant__: I'm building x11-image :) Apr 24 20:28:18 hi Jay7 Apr 24 20:29:05 I tried a narcissus image with enlightenment and surprisingly is not as bad as I remembered ... Apr 24 20:29:19 not yet built by myself Apr 24 20:30:00 ant__: I'll refuse one web-project and return to kexecboot :) Apr 24 20:30:22 oh, how it is? not enough payed? Apr 24 20:30:32 * Jay7 is too tired by web.. Apr 24 20:30:36 he Apr 24 20:31:05 no, I just don't want this anymore :) Apr 24 20:31:53 I'll lost some money but will take some free time Apr 24 20:33:30 btw, I've written my first payed article in our magazine 'IT-Expert' :) Apr 24 20:33:39 Jay7: these 'sh: rm: command not found' seems to happen Apr 24 20:33:50 * Jay7 is writer now :)) Apr 24 20:33:51 just before do_setscene Apr 24 20:34:00 Jay7: ^^^ congrats Apr 24 20:34:08 ant__: yep, I have quick look at this Apr 24 20:34:19 but unsuccessfull Apr 24 20:34:34 need deeper knowledge/inspection Apr 24 20:36:30 Jay7: I have another tragic issue... Apr 24 20:36:31 woglinde: died when building gcc-cross-initial-4.1.1-r23 with "gcc-cross-initial-4.1.1-r23/gcc-4.1.1/gcc/crtstuff.c:1: error: bad value (cortex-a8) for -mtune= switch" and a few similar messages Apr 24 20:36:45 I'm finding that gdb can't debug pthreads without glibc-dbg package installed - what is provided in glibc-dbg that differs from a non stripped libpthread.so? I see that my host system has a non stripped version and gdb is happy with that - wondering if I should make libpthread non stripped on my OE built fs Apr 24 20:37:04 Jay7: something seems wrong with packaged staging of /cross Apr 24 20:38:02 if you clear tmp (and ../cross, then) you'll loose the toolchain Apr 24 20:38:11 on rebuild Apr 24 20:38:18 seems just path mismatch Apr 24 20:38:27 armv5te suffix ignored? Apr 24 20:38:36 (in our case) Apr 24 20:39:11 I'd need some confirmation before pestering Khem and Tartarus Apr 24 20:39:15 :-) Apr 24 20:39:32 hm Apr 24 20:39:47 I've not tried to clean tmp Apr 24 20:40:14 you should have the tools in andrea@mizar /oe/build/tmp/angstrom/cross/armv5te/bin $ Apr 24 20:40:19 or equivalent Apr 24 20:40:33 rebuild from pstage puts them in andrea@mizar /oe/build/tmp/angstrom/cross//bin $ Apr 24 20:40:45 so they are not found... Apr 24 20:40:55 hm.. Apr 24 20:41:16 funny is, the image rebuilds :-) Apr 24 20:41:17 I think you already can pester peoples :) Apr 24 20:41:40 but you cannot build a single new package:-) Apr 24 20:42:21 Jay7: I tried to fish kergoth but the lure was not enough fancy Apr 24 20:42:59 or better...he had worst issues to solve ;-) Apr 24 20:45:38 jo gnutoo Apr 24 20:45:47 hi Apr 24 20:46:22 hoj then try to set inital to the same as cross Apr 24 20:46:27 intermediate too Apr 24 20:46:28 woglinde, I'll try to send my boost+wesnoth work for review even if it's unfinished(I must bugreport for armv4 for boost 36/38) Apr 24 20:46:36 what do you think? Apr 24 20:46:53 gnutoo I cant stop you *g* Apr 24 20:47:03 ok Apr 24 20:47:13 woglinde: makes sense. Will do Apr 24 20:47:27 but I was wondering if it was worth because it doesn't work: Apr 24 20:47:30 *on armv4 Apr 24 20:47:41 hm no prob for now Apr 24 20:47:58 *on screen < 400x300 Apr 24 20:47:58 there arent much who are building wesnoth Apr 24 20:48:03 ah ok Apr 24 20:48:06 for armv4 Apr 24 20:48:14 and it makes no sense for the freerunner Apr 24 20:48:29 is there a DEFAULT_PREFERENCE_armv4 = "-1" ? Apr 24 20:48:37 why does it make no sense? Apr 24 20:48:40 it's a great game Apr 24 20:49:00 the only thing is that because of the high dpi you must be skilled with the stylus Apr 24 20:51:48 * chouimat|work finally got his own sheeva ... no need to use the ones at work for my own experiment Apr 24 20:52:13 is there a runtime/loadtime performance hit when using non-stripped exe's and .so's or is it just a matter of size? Apr 24 20:52:23 gnutoo no keys on the freerunner Apr 24 20:52:28 chouimat|work, some italians have too :) Apr 24 20:52:41 that's not a problem for wesnoth...you can play it with only a stylus Apr 24 20:52:48 else you have the virtual keyboard Apr 24 20:52:48 gremlin[it]: we have over 120 here ;) Apr 24 20:52:51 gnutpp hm okay Apr 24 20:53:05 chouimat|work, uff uff Apr 24 20:53:09 ;~) Apr 24 20:53:30 ah...does the sheeva work well? no hardware bugs etc? Apr 24 20:54:06 Gnutoo: it works :) I have a few prototype n my desk and they are ok too Apr 24 20:54:21 ok thanks Apr 24 20:55:05 chouimat|work, have u heard about some kind of hardware hack on sheevaplug (add SATA, USB, ETH) ??? Apr 24 20:55:17 gremlin[it]: not yet Apr 24 20:56:05 gremlin[it]: we don't modify them, marvell send them to use so we put our software on it and they send them to potential constumers/reviewers ... Apr 24 20:56:39 chouimat|work, i hear something ... but don't have docs about it, but i notice on boot the second ethernet and maybe other USB ... Apr 24 20:56:50 chouimat|work, what kind of software ? Apr 24 20:56:54 Jay7: about ubifs..is merged in 2.6.24 now...we could add the patch to linux-rp too... Apr 24 20:57:34 ant__: what about 2.6.29/30? ;) Apr 24 20:57:35 gremlin[it]: I work for axentra ( www.axentra.com ) Apr 24 20:57:37 is there no curses based browser fore openembedded available ? Apr 24 20:57:53 no lynx , no w3m .. ? Apr 24 20:58:03 pwgen: is there links? Apr 24 20:58:21 ahh thats was the on i forgot .. thx Apr 24 21:02:33 night all Apr 24 21:09:54 * Jay7 -> sleep Apr 24 21:32:07 woglinde: got similar error when building with 4.2.3 tools: "gcc-cross-initial-4.2.3-r9/gcc-4.2.3/gcc/crtstuff.c:1: error: bad value (cortex-a8) for -mtune= switch" Apr 24 21:32:47 hoj, are you still trying to use the whole codesourcery drop, btw? Apr 24 21:34:53 03Angus Ainslie  07fso/milestone5.5 * r55c2f1534e 10openembedded.git/recipes/ (27 files in 2 dirs): efl : bump the PR for anything that inherits efl Apr 24 21:34:58 Tartarus: no, I've removed the ASSUME_PROVIDED stuff from local.conf. I assume that the installed tools stuff is not being found in /opt, but maybe since it's in the PATH that's bad news. Could mv /opt/arm-2008q1/ and try again Apr 24 21:35:04 03Angus Ainslie  07fso/milestone5.5 * rb7ea4f6394 10openembedded.git/recipes/ (e17/eve_svn.bb ewww/ewww_git.bb): eve: rename ewww recipe to eve and change the src_uri Apr 24 21:35:18 hoj, ok Apr 24 21:41:22 hoj hm seems the mtune values differ a little bit Apr 24 21:42:38 woglinde: the "cortex-a8"? Apr 24 21:45:00 03Angus Ainslie  07fso/milestone5.5 * r11ea3d1780 10openembedded.git/recipes/webkit/webkit-efl_git.bb: webkit-efl : add gpref dependency Apr 24 21:46:26 hoj yes Apr 24 21:47:00 or gcc-4.2.3 does not know about cortex-a8 Apr 24 21:47:27 hoj whats your gcc version setting looks now? Apr 24 21:48:07 PREFERRED_VERSION_gcc = "4.2.3+csl-arm-2008q1-126" Apr 24 21:48:08 PREFERRED_VERSION_gcc-cross = "4.2.3+csl-arm-2008q1-126" Apr 24 21:48:08 PREFERRED_VERSION_gcc-cross-initial = "4.2.3" Apr 24 21:48:08 PREFERRED_VERSION_gcc-cross-intermediate = "4.2.3" Apr 24 21:49:37 *sigh* Apr 24 21:49:49 REFERRED_VERSION_gcc-cross-initial = "4.2.3+csl-arm-2008q1-126" Apr 24 21:50:06 PREFERRED_VERSION_gcc-cross-intermediate = "4.2.3+csl-arm-2008q1-126" Apr 24 21:50:45 crud dumb mistake Apr 24 21:51:20 sorry about that. Will try again with more verbose version Apr 24 21:51:20 This is why GCC_VERSION is so good :) Apr 24 21:51:38 hm its my fault a little bit too Apr 24 21:51:49 I just pasted the conf from chinook compat Apr 24 21:52:28 I knew there was some reason I wanted to use a pre-built toolchain ;) Apr 24 21:52:48 Once I get this PREFERRED_LIBC stuff along maybe I'll try and consolidate the toolchain stuff Apr 24 21:52:55 but that's harder, slightly, but not too much Apr 24 21:55:07 Tartarus: is GCC_VERSION supported now or is that part of what's in the works? Apr 24 22:05:48 hoj, distros that use sane-toolchain.inc, mainly minimal, have GCC_VERSION Apr 24 22:05:53 angstrom has ANGSTROM_GCC_VERSION Apr 24 22:06:39 I want to build angstrom, so I could have just set ANGSTROM_GCC_VERSION=4.2.3 ? Apr 24 22:07:36 4.2.3+csl.... Apr 24 22:07:44 ah Apr 24 22:13:28 Is "bitbake angstrom-console-image" the right target to get a kernel/filesystem suitable for nfs and uImage+jffs2? Apr 24 22:28:54 03Leon Woestenberg  07org.openembedded.dev * r32ad169805 10openembedded.git/recipes/binutils/ (binutils-avr32.inc binutils_2.17.bb): (log message trimmed) Apr 24 22:28:54 binutils-avr32.inc: Add DEPENDS autoconf-native and automake-native. Apr 24 22:28:54 On my fresh Ubuntu 9.04 with the minimal set of host packages installed Apr 24 22:28:54 required by OpenEmbedded, the atngw100 build failed due to autoconf Apr 24 22:28:55 and aclocal (from automake package) not being present. Apr 24 22:28:57 Running 'bitbake autoconf-native and automake-native' solved this. Apr 24 22:28:59 Adding those two as DEPENDS to binutils-avr32.inc should fix this Apr 24 22:29:51 Apr 24 22:32:27 whee! hibernate from the command line after a build: install power-management-interface and run "pmi action hibernate" after bitbake foobar-image! Apr 24 22:33:48 on 9.04? Apr 24 22:46:14 woglinde: with PREFERRED_VERSION_gcc* set to "4.2.3+csl-arm-2008q1-126", failure when building gcc-cross-initial-4.2.3+csl-arm-2008q1-126-r4 package is now "build/tmp/cross/armv7a/arm-angstrom-linux-gnueabi/lib/' is not a directory: No such file or directory". "ls build/tmp/cross/armv7a/arm-angstrom-linux-gnueabi/" gives: "bin" Apr 24 22:47:45 Yeah Apr 24 22:47:47 sec Apr 24 22:49:42 hm seems the packages are brokem Apr 24 22:49:53 what's your email? Apr 24 22:50:04 I've got a buncha updates to the CSL recipes ihaven't had time to finish Apr 24 22:50:13 but I think i've got everything for 2008q1 Apr 24 22:50:39 er, bah, I take that back Apr 24 22:50:42 I added a q3 Apr 24 22:50:55 and had only gotten up to 2007q3 hadn't done 2008q1 Apr 24 22:50:58 but i think i know the fix Apr 24 22:51:55 open recipes/gcc/gcc-cross_csl-arm-2008q1.bb Apr 24 22:52:03 remove the do_compile_prepend junk Apr 24 22:52:24 jo mickeyl Apr 24 22:52:29 hi Apr 24 22:53:48 Tartarus: ok, commented it out. Now rm -rf build/tmp and do over? Apr 24 22:54:06 hoj hm nope Apr 24 22:54:10 try again Apr 24 22:54:53 eh wot? you mean just redo "bitbake linux-omap"? Apr 24 22:55:08 w/o rm tmp? Apr 24 22:55:25 bitbake -c clean gcc-cross-initial Apr 24 22:55:32 bitbake linux-omap Apr 24 22:56:04 ok, thanks Apr 24 22:56:40 Tartarus: yes, 9.04 Apr 24 22:57:18 hoj, no, you can just bitbake -c clean the one that failed Apr 24 22:57:24 shouldn't you be in bed *all* ? :-) Apr 24 22:57:28 likewise, nice, need to let that upgrade finish on my box Apr 24 22:57:44 er, what wog said :) Apr 24 22:58:07 I often let my computer finish a build, then go to bed with the computer sitting idle for 8 hours while I get some sleep. Apr 24 22:58:29 ...finish a build during I get in bed... Apr 24 22:58:48 likewise, but hmm, I assume your box normally suspend/resumed fine? Apr 24 22:58:57 mine doesn't quite, X doesn't restore :( Apr 24 22:59:04 Tartarus: under 9.04, yes, before no. Apr 24 22:59:23 ah, here's hoping then :) Apr 24 22:59:29 my problem was userland, best i could tell Apr 24 22:59:34 at least, hibernate works, have tried suspend/resume yet. Apr 24 22:59:56 hibernate is suspend + resume + more, so i guess both work now Apr 24 23:00:33 actually, I will let it hibernate after this build, if I disappear it is because of that :-) Apr 24 23:00:37 good night all Apr 24 23:00:42 n8 likewise Apr 24 23:00:50 tnx Apr 25 00:29:14 today must be my lucky day successfull builds all around ;D Apr 25 01:42:08 i cant figure out how to use the "devshell" Apr 25 01:53:55 03Michael 'Mickey' Lauer  07org.openembedded.dev * rfa512926d0 10openembedded.git/ (2 files in 2 dirs): openezx-kernel: this rev brings back solid GSM on gen1 devices Apr 25 01:57:10 the wiki page for interactive debugging leaves a lot to be desired Apr 25 01:57:26 full of holes **** ENDING LOGGING AT Sat Apr 25 02:59:57 2009