**** BEGIN LOGGING AT Sun Feb 14 02:59:57 2010 Feb 14 10:33:20 hi, tzdata_2009s.bb does not build http://tinderbox.openembedded.org/packages/480119/ the mirror does not have the archive anymore, please use tzdata_2009u or one of the 2010 releases Feb 14 10:44:23 ao2 make a patch an sumbit it Feb 14 10:44:35 already sent to oe-devel Feb 14 10:50:16 ah okay Feb 14 10:50:28 HELO woglinde Feb 14 10:50:33 jo ant Feb 14 10:56:28 woglinde: I have a recipe with DEPENDS = "lzma-native" Feb 14 10:56:40 should I add gzip-native too? Feb 14 10:57:04 I think gzip is a pre-requisite Feb 14 10:57:32 was:IMAGE_FSTYPES = "cpio.gz cpio.lzma" Feb 14 11:19:17 ant dont know Feb 14 11:19:22 try with clean tmp Feb 14 12:24:26 hi eFfeM Feb 14 12:26:16 khem, ping Feb 14 12:44:13 GNUtoo: hi Feb 14 12:44:26 does xorg start now? Feb 14 12:44:28 still trying to get eeepc with the 2.10 drivers working Feb 14 12:44:32 because I've the same issue than you Feb 14 12:44:33 ok Feb 14 12:47:05 i've rebuild the kernel but then probably moved too much, got a black screen, now restarted with the defconfig in git and removed all fb stuff but no result yet Feb 14 12:49:19 but since you have the same issue, i don't feel so alone any more ;-) Feb 14 12:50:16 i've also been looking at this: but I have all those ocnfig settings disabled Feb 14 12:52:15 ok Feb 14 12:55:29 afk for 30-60 mins Feb 14 13:09:32 Who is in charge of giving out more patchwork permissions? Feb 14 13:09:43 I would need to close to entries... Feb 14 14:59:57 hi , did someone tried microxwin over angstrom ? how can i compile project on bitbake ? Feb 14 15:14:17 how can i compile opensource project on openembedded ? please help Feb 14 15:14:44 JDuke128, what is microxwin ? Feb 14 15:14:51 why not using xorg or kdrive? Feb 14 15:15:03 its fastest windowing system Feb 14 15:15:23 ah Feb 14 15:15:34 http://www.microxwin.com/architecture.html Feb 14 15:15:47 they ve removed TCP Xserver & client arch Feb 14 15:15:50 very fast Feb 14 15:15:54 good for omap Feb 14 15:16:05 but i donno how to compile this for beagleboard Feb 14 15:16:11 i got sourcecode Feb 14 15:16:20 did kdrive also remove them? Feb 14 15:16:24 how can i compile it on openembedded ? Feb 14 15:16:38 I'm looking if it's already in oe Feb 14 15:16:41 i didnt know about kdrive Feb 14 15:16:54 but i learnt that microxwin is best Feb 14 15:16:55 for Feb 14 15:16:58 embedded systems Feb 14 15:17:13 we have microwindows Feb 14 15:17:34 what's the difference between microwindows and microxwindows? Feb 14 15:17:35 read here : http://www.microxwin.com/architecture.html Feb 14 15:17:49 microwindows ? Feb 14 15:19:03 i donno microwindows is based on kernel and client & server architecture ? Feb 14 15:19:11 http://www.microwindows.org/ Feb 14 15:20:48 microXwindows seem to depends on a special kernel module Feb 14 15:20:55 do you already have it? Feb 14 15:21:04 well Feb 14 15:21:13 i m sure microwindows is not as fast as microxwin Feb 14 15:21:21 i looked its architecture documentation Feb 14 15:21:33 its treditional Linux X system Feb 14 15:21:37 its traditional Linux X system Feb 14 15:21:40 ok Feb 14 15:21:52 what about directfb? Feb 14 15:21:53 but i donno how to compile it for beagleboard ? Feb 14 15:22:00 make a recipe Feb 14 15:22:02 microwindows 0.91 is available in OE Feb 14 15:22:21 I told him that but he want microXwindows Feb 14 15:22:33 because he say it was faster Feb 14 15:22:40 yes microxwin best i think Feb 14 15:22:43 yes its faster Feb 14 15:22:50 but maybe directfb is faster too Feb 14 15:23:01 and that should be in oe Feb 14 15:23:05 directfb ? Feb 14 15:23:24 i need to run java swing app on some system Feb 14 15:23:28 directfb can handle ? Feb 14 15:23:43 http://en.wikipedia.org/wiki/Directfb Feb 14 15:24:09 directfb is client & server oriented ? Feb 14 15:24:56 I don't think so Feb 14 15:25:11 look at the wikipedia page Feb 14 15:25:31 JDuke128, but if you realy want directXwindows you'll need to make a recipe Feb 14 15:25:51 well i try my best , we can do it together ??? Feb 14 15:25:53 manual is here: http://docs.openembedded.org/usermanual/usermanual.html Feb 14 15:26:30 Unfortunately I haven't got a lot of time recently Feb 14 15:26:35 but I can help a bit Feb 14 15:27:00 we add it to openembedded as a standard then Feb 14 15:27:01 ok ? Feb 14 15:27:09 all people can use it Feb 14 15:27:16 but i donno how to make it ... :S Feb 14 15:27:27 i just need to learn how to make bb files ? Feb 14 15:27:55 JDuke128, I just pasted you the manual for making bb files Feb 14 15:28:24 you need several things to make a recipe: Feb 14 15:28:33 *to know the dependencies of the software you build Feb 14 15:28:46 Adding a new Package Feb 14 15:28:46 *to fill some variables such as website,where to dowload etc... Feb 14 15:29:11 *and you need to know the build system used in your software,such as autotools,cmake etc... Feb 14 15:29:57 if your package uses autotools use that: Feb 14 15:29:57 http://docs.openembedded.org/usermanual/usermanual.html#recipes_autoconf_example Feb 14 15:30:35 http://www.microxwin.com/mxwinsrc.tar.gz Feb 14 15:31:47 * GNUtoo wonder if you realy need microXwindows,because maybe your app is fast enough with standard kdrive or xserver Feb 14 15:32:11 because a beagle board is *very* fast Feb 14 15:33:41 GNUtoo , i dont know but Feb 14 15:33:49 i cant disable cursors on X windows Feb 14 15:33:54 my main problem was that Feb 14 15:34:12 you can Feb 14 15:34:20 GNUtoo , people told me its not possible to hide X cursor on bootup Feb 14 15:34:29 it shown few seconds Feb 14 15:34:35 ah ok Feb 14 15:34:37 mmm Feb 14 15:34:49 its possible to hide ? Feb 14 15:35:02 I'll try but I think you can hide it Feb 14 15:35:05 its very stupid , even on windows ce u can disable cursors Feb 14 15:35:56 JDuke128, what's your window manager? Feb 14 15:36:06 enligtenment on angstrom Feb 14 15:36:14 ok Feb 14 15:36:22 what whas your profile Feb 14 15:36:23 ? Feb 14 15:36:25 illume? Feb 14 15:36:48 GNUtoo: any progress at your side on the eeepc stuff ? Feb 14 15:37:14 profile ? Feb 14 15:37:22 i've paged ickle, hope he can shed some light on it or share his config file Feb 14 15:37:22 I didn't look further...I ate and did things like this Feb 14 15:37:30 ok Feb 14 15:37:31 nice Feb 14 15:37:49 we had a carnival parade here, been to that, got cold toes Feb 14 15:38:12 btw played with rootdelay, the sd card I have needs 5 Feb 14 15:38:16 its standard profile on angstrom Feb 14 15:38:20 i didnt change profile Feb 14 15:38:27 but w/o floppy driver it boots a few seconds faster Feb 14 15:38:31 eFfeM: use rootwait, more reliable Feb 14 15:38:47 ok Feb 14 15:38:51 XorA: agree, forgot about it Feb 14 15:39:07 GNUtoo: see also http://james.99k.org/xerror.tar.gz for my config, dmesg output and xorg log Feb 14 15:39:09 i think i need to run xsetroot before wm startup ? Feb 14 15:39:42 JDuke128, you should ask enlightenment guys...I'm also interested...but I think that in poky's GUI there were no cursor Feb 14 15:40:07 poky ? Feb 14 15:40:17 its window manager like enligtenment ? Feb 14 15:40:33 JDuke128, no it's a distribution...I'll look what's wm Feb 14 15:41:14 x11-sato-image I think is the recipe for that Feb 14 15:42:03 let me try something Feb 14 15:42:18 x11-sato-image , u say it to me ? Feb 14 15:43:31 yes Feb 14 15:43:43 I can try it if you want Feb 14 15:44:42 ok Feb 14 15:44:45 try... Feb 14 15:45:54 JDuke128, solved Feb 14 15:46:08 ahh really ? Feb 14 15:46:11 -nocursor Feb 14 15:46:12 u made cursor invisible ? Feb 14 15:46:16 is an Xorg argument Feb 14 15:46:17 yes Feb 14 15:46:19 -nocursor ? Feb 14 15:46:23 indeed Feb 14 15:46:24 where is it ? Feb 14 15:46:27 use Xorg Feb 14 15:46:28 which file i add ? Feb 14 15:46:43 :/etc/X11/??? Feb 14 15:46:50 where is it Feb 14 15:46:51 I don't know...it depends on how you launch Xorg...do you lauch it like this: Feb 14 15:47:13 /etc/init.d/xserver-nodm start Feb 14 15:47:16 if so look into: Feb 14 15:47:28 /etc/x11/Xserver Feb 14 15:47:33 i m using angstrom linux Feb 14 15:47:46 ok trying now quick Feb 14 15:47:55 in "OMAP3 Beagle Board" | "Gumstix Overo") Feb 14 15:48:07 add that Feb 14 15:48:07 -nocursor to that line Feb 14 15:48:11 ARGS="$ARGS ${PPM}" Feb 14 15:48:13 like this: Feb 14 15:48:40 ARGS="$ARGS ${PPM} -nocursor" Feb 14 15:49:19 and then,after restarting Xorg , go into the enlightenment settings and remove mouse cursor if you have enlightenment mouse cursor Feb 14 15:49:54 i hope so looking now :) Feb 14 15:51:35 there is no ${PPM} on Xserver file Feb 14 15:51:44 JDuke128, so no need foor making a complex recipe of a strange software(because it needs special kernel module that may not work on beagle board) Feb 14 15:52:21 wait i send my Xserver to pastebin now Feb 14 15:53:03 ok Feb 14 15:53:35 this is what beagleboard has : http://pastebin.com/m973302f Feb 14 15:56:15 where to add ? Feb 14 15:57:25 Gnutoo , i think it should be same as overo but different location :S Feb 14 15:58:19 http://pastebin.com/d6bf4dcfe should work Feb 14 15:58:30 save your old file before Feb 14 15:59:49 ok Feb 14 15:59:50 trying now Feb 14 16:03:20 hmm Feb 14 16:03:34 it hangs on psplash screen Feb 14 16:05:30 or put back your old file Feb 14 16:05:39 and add -nocursor somewhere Feb 14 16:05:42 like in ARGS Feb 14 16:06:39 ahh Feb 14 16:06:50 it throws me to console Feb 14 16:07:17 cant open : /dev/misc/rts Feb 14 16:10:18 well Feb 14 16:10:24 how can i open display on console ? Feb 14 16:10:30 ? Feb 14 16:10:39 ctrl+alt+F2? Feb 14 16:11:05 can't you control your beagleboard from ssh? Feb 14 16:11:46 i m controlling thru monitor didnt install ssh on it Feb 14 16:16:21 maybe using microxwin will solve the problem Feb 14 16:18:02 btw , microxwin gives %300 performance on games Feb 14 16:18:13 against standard x system Feb 14 16:18:23 its very huge difference Feb 14 16:19:03 anyone here every worked with IMGLIB? Feb 14 16:28:08 JDuke128, cross compiling microxwin is *VERY HARD* compared to *EDITING A SIMPLE FILE* Feb 14 16:28:36 so you'd better install ssh on it Feb 14 16:28:49 and edit a simple line to make it work Feb 14 16:29:04 JDuke128, btw are you shure you don't have ssh? Feb 14 16:29:19 because in angstrom it comes by default Feb 14 16:29:28 it's another server called dropbear Feb 14 16:31:25 DJWillis: i've made a quick patch for xfce46-image: see http://www.pastie.org/824477 Feb 14 16:31:30 ok to commit like this ? Feb 14 16:40:05 hmm Feb 14 16:40:19 ok Feb 14 16:40:22 i ll look now Feb 14 17:14:02 hej, maybe some perl wiz could have a look at http://patchwork.openembedded.org/patch/1542/ (sorry for poking ;p) Feb 14 17:19:00 is there any document how to compile hello.c on bitbake ? Feb 14 17:24:46 JDuke128: I dont know if OE serves one at the wiki, but gumstix documentation provides one (dont use the collections though , as this is gumstix specific): http://www.gumstix.net/Setup-and-Programming/view/Build-system-overview/Hello-world-tutorial/111.html Feb 14 17:28:07 ok Feb 14 17:28:43 so i want to call some programs after as soon as x desktop initialize before cursor appears , where is it ? Feb 14 17:28:46 JDuke128: OE manual: http://docs.openembedded.org/usermanual/usermanual.html#recipes_helloworld_example Feb 14 17:29:14 ok thanks Feb 14 17:29:18 i ll look into it Feb 14 17:34:27 where is cursor source code in general of Linux dists. i ll delete X cursor on source code Feb 14 17:34:40 but i donno where its source code located to hide cursor from kernel source? Feb 14 17:36:22 hm, what am I doing wrong, I'm using OE overlay and everytime I change recipe in overlay, cache is always rebuilding... Feb 14 17:47:24 huhu Feb 14 17:49:05 guys, it's driving me mad :) I have seen a link on the OE site to an overlay howto, I know I have seen the link a couple of days ago and now that I actually have time to read it - I can not find it anymore Feb 14 17:49:11 been digging around on the OE site for the last 20 minutes now Feb 14 17:49:22 does anyone remember where it was? Feb 14 17:52:15 JDuke128, did you succeed at removing the cursor with the config file Feb 14 17:52:15 ? Feb 14 17:52:30 else you can do that : Feb 14 17:52:50 Jin^eLD: http://www.kernel-labs.org/files/openembedded-guide/openembedded-guide-6.html Feb 14 17:52:53 at the end of thee file there is: Feb 14 17:52:54 exec xinit /etc/X11/Xsession -- $XSERVER $DISPLAY $ARGS $* >/tmp/x.log 2>&1 Feb 14 17:52:56 print that Feb 14 17:53:00 like that: Feb 14 17:53:02 echo "exec xinit /etc/X11/Xsession -- $XSERVER $DISPLAY $ARGS $* >/tmp/x.log 2>&1" Feb 14 17:53:10 hm, i'm getting a very weird error on bitbake -c menuconfig virtual/kernel: http://tinderbox.openembedded.net/builds/59819/ Feb 14 17:53:11 or better... Feb 14 17:53:24 add the -nocursor there Feb 14 17:53:38 soemthing about gconv not being able to connect to a server: http://tinderbox.openembedded.net/public/logs/task/4975410.txt Feb 14 17:53:46 lol Feb 14 17:53:55 thougth menuconfig was just a small ncurses prog that ran locally Feb 14 17:53:58 ynezz: is that one still valid, it talks about monotone? I had a working setup a year ago, but since it did not quite work anymore after I tried it recently I thought some things have changed Feb 14 17:54:02 or is this bitbake rebelling Feb 14 17:54:10 do you run sourcemage? Feb 14 17:54:32 Failed to *summon* the GConf *demon* Feb 14 17:54:43 or mandrake Feb 14 17:54:49 no, opensuse Feb 14 17:55:00 and it worked earlier today .... Feb 14 17:55:03 ok Feb 14 17:55:24 Jin^eLD: http://pastebin.ca/1796412 I've this Feb 14 17:55:40 I see summoning deamons,ELF,DRARF etc.... Feb 14 17:55:41 Jin^eLD: s/I've/I've had/ Feb 14 17:56:01 not yet Feb 14 17:56:03 ynezz: thanks, I'll compare it to mine Feb 14 17:56:13 mmm Feb 14 17:56:18 i couldnt remove cursor but i write stupid code that will annoy beagle Feb 14 17:56:27 will work background and run xsetroot everytime Feb 14 17:56:30 bad solution Feb 14 17:56:39 it's easy...just try to edit that file Feb 14 17:56:53 can i remove cursor from kernel source ? Feb 14 17:56:59 sorry not remove Feb 14 17:57:00 it's in xorg Feb 14 17:57:00 hide... Feb 14 17:57:04 not in kernel Feb 14 17:57:09 if you do that Feb 14 17:57:12 xorg source from bitbake ? Feb 14 17:57:15 you will have to recompile xorg Feb 14 17:57:27 which is harder than editing a file Feb 14 17:57:38 editing file not helping Feb 14 17:57:50 i tried but it hangs on psplash screen Feb 14 17:57:58 ok do that: Feb 14 17:57:58 when i edit there Feb 14 17:58:01 echo the last line Feb 14 17:58:15 and revert the modifications you made Feb 14 17:58:46 mm Feb 14 17:58:53 revert ? Feb 14 17:59:18 GNUtoo: also got confused a little bit about videodev and friends, since the webcam is always there I decided to include the modules in the kernel, but still on a boot it insists to load videodev and then complains it is already in the kernel. And grep -r videodev /etc gives no results (expected it to be in /etc/modules or so, but apparently it isn't). Any idea? Feb 14 17:59:34 strange... Feb 14 17:59:41 JDuke128, restore the original file Feb 14 17:59:59 JDuke128, then echo "insert_last_line_here" Feb 14 18:00:11 I'll try it Feb 14 18:00:14 k Feb 14 18:00:52 echo "exec $XSERVER $ARGS $*" exec $XSERVER $ARGS $* Feb 14 18:01:00 yes that thing Feb 14 18:01:02 and do: Feb 14 18:01:07 echo "exec $XSERVER $ARGS $*" Feb 14 18:01:12 /etc/init.d/server-nodm restart Feb 14 18:01:20 for me it gives that: Feb 14 18:01:22 exec xinit /etc/X11/Xsession -- /usr/bin/Xorg :0 -nocursor >/tmp/x.log 2>&1 Feb 14 18:01:38 i remove echo "exec $XSERVER $ARGS $*" this ? Feb 14 18:02:17 pastebin me your file Feb 14 18:02:21 okay Feb 14 18:04:38 http://pastebin.com/m61bddb54 Feb 14 18:04:42 this is Xserver Feb 14 18:04:51 coming in 5 mins quick , what to do there Feb 14 18:04:55 i m coming 5 min Feb 14 18:05:22 ok Feb 14 18:11:07 what to add ? on last? Feb 14 18:11:12 can u send to pastebin ? Feb 14 18:11:29 http://pastebin.com/m61bddb54 Feb 14 18:11:35 this one is my Xserver file Feb 14 18:17:23 GNUtoo , did you look ? Feb 14 18:17:32 yes Feb 14 18:17:37 paste me the output of: Feb 14 18:17:47 /etc/init.d/xserver-nodm stop Feb 14 18:17:51 /etc/init.d/xserver-nodm start Feb 14 18:18:35 from ssh ? i do... Feb 14 18:19:15 -sh: /etc/init.d/xserver-nodm: not found Feb 14 18:19:51 i wont edit ? Feb 14 18:19:56 Xserver ? Feb 14 18:20:23 hmmm Feb 14 18:20:27 maybe Xinit ? Feb 14 18:21:37 root@kadir:~# /etc/X11/Xinit Feb 14 18:23:29 ls -l /etc/init.d ? Feb 14 18:24:01 pastebin the result Feb 14 18:24:05 http://pastebin.com/m75373428 Feb 14 18:24:56 how is X started? Feb 14 18:25:05 maybe gpe-dm ? Feb 14 18:25:39 yes try that: Feb 14 18:25:47 /etc/init.d/gpe-dm stop Feb 14 18:25:52 /etc/init.d/gpe-dm start Feb 14 18:26:16 root@kadir:~# /etc/init.d/gpe-dm stop Stopping GPE display manager: gpe-dm Feb 14 18:26:24 yes stopped it Feb 14 18:26:27 ok Feb 14 18:26:54 root@kadir:~# /etc/init.d/gpe-dm start Feb 14 18:27:04 Starting GPE display manager: gpe-dm Feb 14 18:27:30 that's all? Feb 14 18:28:02 yes Feb 14 18:28:05 ok Feb 14 18:28:09 its not giving output i look inside source Feb 14 18:28:15 ok Feb 14 18:28:51 http://pastebin.com/m1160827f Feb 14 18:28:57 this one is its inside Feb 14 18:29:04 i ve tried directly called Feb 14 18:29:22 this : /usr/bin/gpe-dm Feb 14 18:29:26 file /usr/bin/gpe-dm Feb 14 18:30:02 its elf binary but i can read some Feb 14 18:30:15 ok Feb 14 18:30:21 I don't know then.... Feb 14 18:30:24 ^@/etc/X11/X^@^@/etc/X11/Xserver^@^@^@^@-noreset^@^@^@^@gpe-dm: coul Feb 14 18:30:31 maybe make an init script that call : Feb 14 18:30:33 Xorg Feb 14 18:30:42 DISPLAY=:0.0 x-window-manager Feb 14 18:30:58 now closed service and try Feb 14 18:31:00 and add nocursor as argument at xorg Feb 14 18:31:10 exec xinit /etc/X11/Xsession -- /usr/bin/Xorg :0 -nocursor >/tmp/x.log 2>&1 Feb 14 18:32:20 ok Feb 14 18:33:07 hmm Feb 14 18:33:43 i think i ve its source code Feb 14 18:33:45 gpe-dm Feb 14 18:34:50 yea , i ve its bitbake files Feb 14 18:42:15 elf reader Feb 14 18:42:17 i look for Feb 14 18:43:26 GNUtoo , well i read where it reaches with binary reading :S Feb 14 18:44:04 strange that it has another system for starting X Feb 14 18:45:09 yes its making me annoy Feb 14 18:45:19 opening with hex editor now Feb 14 18:49:51 waow Feb 14 18:50:32 GNUtoo , i got some file locations : /etc/X11/Xserver -noreset Feb 14 18:50:51 ok Feb 14 18:51:07 now i try on ssh Feb 14 18:51:29 maybe remove the package responsible of starting xserver and install the one that does /etc/x11/xserver-nodm Feb 14 18:51:44 opkg search "something" is your friend Feb 14 18:51:53 yes Feb 14 18:51:54 it is Feb 14 18:52:22 which one it is to install ? Feb 14 18:52:32 I'll look Feb 14 18:53:12 xserver-nodm-init Feb 14 18:54:05 btw , i ve found command fully Feb 14 18:54:14 khem, ping.. i'm currently bringing the uclibc recipe into a state where it works for me (apparently nobody ever does i386?) for git and 0.9.30.2 (the rest continues to use the old erm.. stuff unaltered). Now i'm curious as to 0) why you (still) seem to use a non-sysroot staging layout 1) the story behind lib/crt[1in].o (i suspect this is old cruft, isn't it?) 2) am i right that you never needed limits.h to be fixincluded, even for 4.[012].x? Feb 14 18:54:45 http://pastebin.com/m2477cf3 Feb 14 18:54:57 GNUtoo , this one is starting X server http://pastebin.com/m2477cf3 Feb 14 18:55:31 well Feb 14 18:55:33 i remove this Feb 14 18:55:50 JDuke128, no Feb 14 18:55:56 Xserver is not an init script Feb 14 18:56:06 do /etc/init.d/xserver-nodm start Feb 14 18:56:14 and it'll use that Xserver file Feb 14 18:56:22 blindvt: lib/crt[1in].o is needed for gcc to build with shared support which in turn in needed to compile nptl enabled glibc/uclibc Feb 14 18:56:52 I think I should fix eee701 after dinner Feb 14 18:56:52 blindvt: just yesterday I compiled x86/uclibc/lt.old from nptl branch Feb 14 18:57:14 s/fix/try to fix Feb 14 18:59:18 khem, 3) i think that most of the distro/machine specific config hunks can simply go after my changes 4) how do you handle mips_o32/n32/n64 ABI selection, not at all, it seems (I've redone configmangle and added a uclibc-arch.bbclass for arch, abi, endian). 5) get_monotonic_srcrev is orphaned AFAICT, would that be a generally useful thing for git (but perhaps not in this exact form, perhaps) Feb 14 19:01:01 GNUtoo : Adding system startup for /etc/init.d/xserver-nodm. Feb 14 19:01:06 now i got it Feb 14 19:01:16 ok Feb 14 19:02:37 khem, lib/crt[1in].o really? Why so? because you don't (?) do a 3-stage setup but just 2-stage? I mean, we have (non-pregen) headers which has always been enough for me for an initial-stage compiler that i consequently use to strap a full install_dev that in turn can be used to build a cross- and native compiler (in the 3-stage setup that i always did up until oe) Feb 14 19:03:59 (EE) Failed to load module "glx" (module does not exist, 0) Feb 14 19:04:09 (EE) Failed to load module "type1" (module does not exist, 0) Feb 14 19:04:21 blindvt: we use same sequence for glibc as well as uclibc Feb 14 19:06:10 khem, i686-oe-linux-uclibc/bin/ld: cannot find -lc;# so 1) is answered; it's due to that shortcut 2-stage setup you do. /me reinstated the lib/{crt[1in].o,libc.so} hack. hmpf Feb 14 19:07:15 brb 20 mins Feb 14 19:07:43 khem, 1) is answered. Would you be so kind and comment on the other questions if you have a minute? Feb 14 19:09:17 khem, please $ sed -i -e s/vw/w/ docs/usermanual/reference/class_pkgconfig.xml && git commit -s -m 'doc: typo fix' docs/usermanual/reference/class_pkgconfig.xml Feb 14 19:10:09 khem, "vwhich" -ENOPARSE Feb 14 19:13:24 blindvt: are you the one who answered the blackbox (pkgconfig) question on the oe-devel list? Feb 14 19:13:44 blindvt: We dont do multilibs Feb 14 19:14:07 mr_nice, yes, but i didn't really answer, but only replied Feb 14 19:14:34 blindvt: because I am the one who asked it :) Feb 14 19:14:46 mr_nice, heh :) Feb 14 19:14:48 we used limits.h from glibc Feb 14 19:15:20 bindvt: without the explicit pc handling in the blackbox recipe QA complains about wrong paths in it Feb 14 19:16:47 blindvt: to answer 5) the function was an attemt to get a unique srcrev from git commit-id Feb 14 19:16:58 but it is not complete Feb 14 19:17:02 bindvt: with the fix in do_install_prepend everything works well. the only thing I did not know if the original path is used by openembedded to complie othe packages Feb 14 19:18:15 mr_nice, odd, i would have read the pkgconfig.class to take care of exactly this situation, but ok. See where the .pc ends up and just adjust the path to it (sed not finding the .pc was your initial question, IIRC) Feb 14 19:18:47 JDuke128, the error you saw can be ignored...I've them too and it works Feb 14 19:20:45 khem, what do you mean from limits.h from glibc? That doesn't strike me as what i'd want, overall? It's not unlikely that they are pretty similar but there's no guarantee for that. Apart from that, we _have_to_ fixinclude headers to avoid all sort of unobvious grief Feb 14 19:21:37 khem, at least potential grief with future gcc's Feb 14 19:22:24 mr_nice, so add bbkeys, it also uses libbt Feb 14 19:23:09 mr_nice, (and blackbox without a key-handler is pretty useless anyway, at least for non-kiosk installs with a keyboard :) Feb 14 19:23:12 bindvt: good idea I will try this. Also I will try to find out why pkgconfig does not find the path in the pc file of blackbox. Feb 14 19:23:40 mr_nice, cool. TIA! Feb 14 19:24:26 blindvt: Its done by gcc now Feb 14 19:24:39 blindvt: thx for doc fix Feb 14 19:25:07 khem, i didn't mean explicit multilib but toolchains defaulting to e.g. n64 or n32 (i consider o32 for new compiles pretty useless, but of course some may be trapped there) Feb 14 19:25:40 blindvt: These things are controlled by machine conf files Feb 14 19:26:57 khem, examples that want o32/n32 ? Feb 14 19:29:49 blindvt: most mips part use o32 so far in general Feb 14 19:30:08 however if you have to decide on default it has to be either in distro or machine Feb 14 19:30:10 configs Feb 14 19:30:31 defaults are conservative Feb 14 19:33:03 khem, the class is a trivial way to handle it uniformly in one spot. ^mips64: return MIPS_N64_ABI else ^mips: return MIPS_N32_ABI can thus be conveniently be turned into something that matches expectations from mips users Feb 14 19:34:14 I did not look into your patch yet Feb 14 19:34:23 so far magic is in uclibc.inc Feb 14 19:35:35 khem, i didn't send the patch out yet, but i will send it to you directly and let you verify and handle it Feb 14 19:36:32 khem, did you see my 8-series where 1..7 should be ok and 8 (the xz thing) is handled by pb_ ? Feb 14 19:36:52 khem, anything i could or should do to trick you into reviewing 1..7 ? Feb 14 19:38:26 khem, (i've accidentally cleaned up and bumped Linux-PAM yesterday; should send that as well) Feb 14 19:38:27 not yet Feb 14 19:38:32 may be today evening Feb 14 19:38:40 cool do so Feb 14 19:39:49 khem, oh, and the 'BBCLASSEXTEND canadian' question somehow holds me back from sending in gmp and mpfr bumps (i have working old-fashioned bumps lying around though) Feb 14 19:45:16 hi all Feb 14 19:45:40 i'm having trouble with openmoko toolchain, compiling apache... Feb 14 19:47:02 it says that miss the file named "configure" in apr... but the source should be ok, i took it from apache mnirrror Feb 14 19:47:05 mirror* Feb 14 19:47:46 .. Feb 14 19:50:33 i have to go sorry Feb 14 19:50:35 bye all Feb 14 20:05:44 GNUtoo , ok Feb 14 20:05:49 GNUtoo , now i try back Feb 14 20:05:56 ok Feb 14 20:20:47 eFfeM, Feb 14 20:20:51 look into: Feb 14 20:21:06 /sys/module/i915/parameters Feb 14 20:21:31 I've modeset -> -1 Feb 14 20:25:42 blindvt: ok, found the problem with pkgconfig.bbclass (the link was in rlink-path). I will try to prepare a patch for the ml. Feb 14 20:26:02 Gnutoo , i ve found which command it runs : its : Xorg -br -pn :0 -noreset Feb 14 20:26:13 ok Feb 14 20:26:23 just add -nocursor to it Feb 14 20:26:27 at the end Feb 14 20:26:40 try: Feb 14 20:27:03 Xorg -br -pn :0 -noreset -nocursor Feb 14 20:27:04 and: Feb 14 20:27:10 Xorg -nocursor -br -pn :0 -noreset Feb 14 20:29:23 unreUnrecognized option: -nocursor Feb 14 20:29:55 Hello Feb 14 20:31:23 gnutoo will do Feb 14 20:31:54 I still have the error Feb 14 20:31:55 does it now work for you ? Feb 14 20:31:57 ah ok Feb 14 20:32:09 I've strange dmesg Feb 14 20:32:13 I'll try setting mem Feb 14 20:32:14 what is it Feb 14 20:32:21 btw haven't got contact with ickl Feb 14 20:32:23 page table errors etc... Feb 14 20:34:35 ouch, dont have those Feb 14 20:35:59 still no result...installing mesa Feb 14 20:36:57 Installing acpid Feb 14 20:37:39 whats bitbake for xorg ? Feb 14 20:37:47 already installed Feb 14 20:37:50 bitbake xorg Feb 14 20:38:29 ERROR: Nothing PROVIDES 'xorg' Feb 14 20:40:00 xserver-xorg maybe Feb 14 20:40:10 xserver-xorg Feb 14 20:40:23 ls recipes/*/*xorg* :-) Feb 14 20:40:49 dri2 things are in extensions Feb 14 20:40:50 hmm Feb 14 20:40:52 i c... Feb 14 20:40:55 thnx all Feb 14 20:41:27 how can i edit these things sources? Feb 14 20:43:18 JDuke128: just edit the source at the work dir and use bitbake -f -c compile foo Feb 14 20:44:27 JDuke128: you will need to do a bitbake foo after this to create a package. see http://wiki.openembedded.net/index.php/Bitbake_cheat_sheet Feb 14 20:48:24 okay Feb 14 20:48:38 i ve found libxcursor on sources Feb 14 20:48:45 it shows ugly big X cursor on there? Feb 14 20:50:45 i want to delete X cursor from sourcecode Feb 14 20:50:56 someone know where it is ? Feb 14 20:57:15 eFfeM, mmm what was the xorg channel? xorg-devel? Feb 14 20:57:45 doesn't seem so Feb 14 20:57:51 I'll look in logs Feb 14 20:58:59 ah intel-gfx Feb 14 21:04:54 eFfeM, we should try theses dri,dri2 and glx Feb 14 21:04:59 in which recipe are they? Feb 14 21:08:32 in my distro they are in: Feb 14 21:08:33 xserver-xorg-core: /usr/lib/xorg/modules/extensions Feb 14 21:08:39 GNUtoo: there is an xorg channel but for gfx issues they refer to #Intel-gfx Feb 14 21:09:16 pl Feb 14 21:09:18 ok Feb 14 21:09:20 s/pl// Feb 14 21:11:38 there are pacakges for it, eg xserver-xorg-extension-dri Feb 14 21:11:41 will try later Feb 14 21:11:45 mmm Feb 14 21:11:54 will try now Feb 14 21:11:57 I've .la files Feb 14 21:12:01 so libtool Feb 14 21:12:03 but not .so Feb 14 21:12:26 they should be shiped with xserver-xorg Feb 14 21:13:00 nice thanks a lot Feb 14 21:13:17 mr_nice, i'd experiment with a bold sed -i -e 's:${STAGING_LIBDIR}::g' -e 's:${STAGING_INCDIR}::g' $i in pkgconfig.bbclass Feb 14 21:13:17 they are not on the feed Feb 14 21:13:20 eFfeM: not my call to say what you commit (or not) but that patch looks good to me. Feb 14 21:13:52 works Feb 14 21:14:14 DJWillis: ok, will cmmit Feb 14 21:14:15 dbus-x11 was missing Feb 14 21:14:16 but it works Feb 14 21:14:37 dbus-x11 is on my system, GNUtoo do you have it working? with extensions ? or without? Feb 14 21:15:08 yes Feb 14 21:15:13 I installed the 3 extensions Feb 14 21:15:15 and it worked Feb 14 21:15:24 but I bet only dri2 is needed Feb 14 21:15:29 trying it Feb 14 21:15:54 basically I was mislead by the fact that theses extentions are not normally needed Feb 14 21:15:59 but for kms they are Feb 14 21:16:18 here too Feb 14 21:16:19 I'll opkg update Feb 14 21:16:22 and upgrade Feb 14 21:16:26 so it works? Feb 14 21:16:29 yes Feb 14 21:16:32 nice Feb 14 21:16:33 mr_nice, i.e. avoid adding another instance massaging -rpath / -Y / --library-path and other occurance like that Feb 14 21:16:35 but the packages are not on the feed Feb 14 21:16:45 sorry for making us go in a wrong direction Feb 14 21:16:53 but when I thought they were unecessary Feb 14 21:17:02 I didn't know how kms worked Feb 14 21:18:25 blindvt: hm, yes. it would be a good idea to replay this to the ml Feb 14 21:19:15 mr_nice, sent Feb 14 21:19:42 blindvt: thx Feb 14 21:20:05 GNUtoo: one more thing; I tried to compile in uvcvideo, but i get a message in dmesg that it is already loaded so apparently someone tries a manual install Feb 14 21:20:18 strange Feb 14 21:20:40 maybe udev detects the camera and loads the module? Feb 14 21:21:54 does anybody else see /home in their staging dir or did i goof up somehow? Feb 14 21:23:15 would be nice if sanity would yell at /root and /home in the staging dir.. Feb 14 21:23:23 do images have a PR ? Feb 14 21:24:02 eFfeM, yes and no Feb 14 21:24:08 eFfeM, tasks have Feb 14 21:25:07 some images have too, so add it for xfce46-image Feb 14 21:26:30 ah ok Feb 14 21:26:44 sorry I was thinking about something else Feb 14 21:26:44 grep PR images/*.bb :-) Feb 14 21:26:46 machine config Feb 14 21:27:05 because I had the issue that the changes of machine config were not taken into account Feb 14 21:27:53 khem, see above. Do you or did I ? :) Feb 14 21:28:47 eFfeM, only dri is needed Feb 14 21:28:52 try it with only dri Feb 14 21:30:36 just added all to the image, just committed seems the best way (and already pushed) Feb 14 21:30:57 CIA is gone again Feb 14 21:31:57 nice it now works Feb 14 21:32:05 btw you can disable modules with: Feb 14 21:32:23 Disable "glx" Feb 14 21:32:27 in Module section Feb 14 21:32:37 I've gmpc on my eee701 now Feb 14 21:38:43 cool Feb 14 21:39:05 does midori now work for you ? Feb 14 21:46:32 calling it a day, cya tomorrow! Feb 14 21:46:41 nite effem Feb 14 21:51:18 woglinde_, hi Feb 14 21:51:59 jo Feb 14 21:58:42 woglinde3, does openoffice have any changes to run on my eeepc701? (x86->x86) Feb 14 21:59:03 what were the issues? Feb 14 22:09:15 mmm | ImportError: No module named libxml2 in gnome-docs-utils Feb 14 22:09:48 I don't know how to solve that because: Feb 14 22:10:27 *there is no libxml2.py in libxml2 sources but there is a libxml.py which has a lot less methods than the one on my desktop Feb 14 22:11:03 *libxml2 doesn't even ship python files because of custom do_stage => I should fix that Feb 14 22:11:31 if I remember well I had some patches but didn't test them for non-native recipe **** ENDING LOGGING AT Mon Feb 15 02:59:57 2010