**** BEGIN LOGGING AT Tue May 11 02:59:56 2010 May 11 03:57:32 JJ_: I dont know if anyone in OE community actively builds one with kernel 2.4 but there is support May 11 03:58:58 JJ_: mtx-1 and mtx-2 are still using 2.4 kernel in OE May 11 03:59:05 you might look into that May 11 04:59:47 thx, cos the bootloader for my ts 7200 isn't working, and kernel 2.6 is too huge to fit into my flash memory May 11 05:16:12 JJ_, you could try building a modular kernel, with just enough built in to boot May 11 05:16:32 that is what i am trying to figure out May 11 05:16:40 i donno how to do that May 11 05:16:42 should be able to get it to fit into ~1mb May 11 05:16:54 how big is your flash? May 11 05:17:21 am i able to cut it down to below 800k? May 11 05:17:41 cos the flash only gives me around 800k May 11 05:17:50 maybe. But its not going to be easy. May 11 05:18:37 cool, ar you able to give me ur email, so i consult with u, really want to fix it May 11 05:18:49 errr... i'd rather not May 11 05:19:14 well, u got any thing for me to look at? May 11 05:19:26 make menuconfig May 11 05:19:33 read the help text for every option May 11 05:20:01 if your architecture supports smaller instruction sizes, e.g. arm thumb, see if you can enable that May 11 05:20:59 disable everything except the bare minimum needed to detect your root filesystem and the hardware driver needed for the device (e.g. your flash) May 11 05:22:17 JJ_, http://www.embeddedarm.com/products/board-detail.php?product=ts-7200 that says that you have 8mb NOR... ? May 11 05:22:56 the flash is filled with redboot and other bootup stuff May 11 05:23:08 which only left me around 800k to fit the kernel May 11 05:23:26 well i suggest you decide what you want to keep and free up some space May 11 05:23:56 you could back it up with your jtag, similar to how you are planning to flash the kernel May 11 05:24:06 well, i tried to play around with the flash, and ...stuff up one board...with i can't get it to boot up at all May 11 05:24:50 well, thx for the heads up May 11 05:25:27 one more question, where can i do the disable May 11 05:25:37 ? May 11 05:26:01 u say disable everything except the bare minimum May 11 05:26:06 but where can i do tat May 11 05:26:11 oh. disable in your kernel configuration May 11 05:26:16 yep May 11 05:27:09 i think it was something like: bitbake virtual/kernel -c menuconfig May 11 05:27:40 i don't recall if that's the correct way or not, i just do it from the kernel tree with make menuconfig May 11 05:28:09 kk May 11 05:28:29 thank you so much for your time May 11 05:28:41 hey grg May 11 05:28:49 hello khem May 11 05:28:59 how are you doing. What are you upto these days May 11 05:29:29 playing with mp3 players on mips32 May 11 05:29:32 grg: have you been able to use gcc 4.4 after I added the -mplt to the mips toolchain May 11 05:29:45 as default May 11 05:31:17 * grg is ashamed to say he hasn't done a oe git pull since.... dunno... maybe january May 11 05:31:29 * grg hides May 11 05:31:47 ugh May 11 05:32:12 grg: which version of gcc are u using though May 11 05:32:26 4.4.1 still May 11 05:32:35 man update May 11 05:32:40 i know, i should pull in your latest changes May 11 05:32:55 they are only for minimal distro by default May 11 05:33:00 which distro do you use May 11 05:33:12 a custom anstrom derived distro May 11 05:34:40 if i do a git pull, i'll probably spend another week fixing all the custom recipes i have... can't really justify that kind of time expenditure right now May 11 05:35:20 true May 11 05:35:25 a lot has changed May 11 05:35:32 there are fundamental changes May 11 05:35:40 * grg 's project is undermanned. One man show. May 11 05:35:40 like staging etc May 11 05:35:52 grg: hmmm May 11 05:36:06 u are the king of jungle May 11 05:36:16 and the jungle is think May 11 05:36:22 s/think/thick/ May 11 05:36:38 heh May 11 05:36:50 well as long as you are enjoying it May 11 05:37:40 grg: how is opkg stuff going on May 11 05:37:54 khem, not much happening May 11 05:38:03 grg: I see May 11 05:38:12 it still needs lots of work, but the worst problems (as i saw them) have been resolved May 11 05:38:36 grg: cool thats better May 11 05:39:38 it needs a total rewrite, without regard to compatibility with existing systems May 11 05:41:36 hmmm thats a bigger ask May 11 05:41:52 * khem is going to sleep May 11 05:42:55 'night May 11 06:55:11 good morning May 11 07:07:37 gmorning May 11 07:07:50 is there any release schedule for a new stable branch? May 11 07:08:16 hi May 11 07:08:33 nik0n: from what I know angstrom devs have few bugs to fix still May 11 07:10:46 thx hrw ... May 11 07:21:38 hi May 11 07:21:56 moin May 11 09:03:36 goood morning May 11 09:04:59 hi recalcati May 11 09:05:12 hi mckoan May 11 09:06:53 recalcati: ttonight here there was a little earthquake 3.3° and there?? May 11 09:09:03 mm, no I didn't hear anything !! May 11 09:25:44 mckoan: my colleague hear something about earthquake at the radio May 11 10:21:05 re May 11 10:21:47 does anyone know what package fsck.ext3 and fsck.ext4 is in? or can it only be done via busybox configuration? May 11 10:22:15 e2fsutils-fsck I think May 11 10:22:26 * XorA|UDS is at conference though so cant check May 11 10:22:36 ah, right, its in e2fsprogs it seems May 11 10:22:40 thanks May 11 10:41:36 Jin^eLD: util-linux-ng now maybe rather May 11 10:42:05 ah.. fsck.ext* are e2fsprogs, fsck itself is u-l-ng May 11 10:42:18 yep, thanks May 11 11:36:38 hello al May 11 11:36:41 +l May 11 11:36:51 hi likewise May 11 11:37:02 hi Jin^eLD May 11 13:07:04 hi, is anyone here who could try to help me with a OE problem? May 11 13:07:13 just ask May 11 13:07:16 don't ask to ask May 11 13:07:24 ok :) May 11 13:07:39 sometimes everybody can help, sometimes we are all busy or asleep May 11 13:08:31 i tried to build the helloworld-image distributen for an arm based platform, and it always tries to include iphone-sdks_2.2.1.bb and fails May 11 13:09:27 in the iphone-sdks description is this: PROVIDES = "linux-libc-headers" May 11 13:12:33 is this the reason why it tries to include the iphone-sdks? May 11 13:15:34 konni: helloworld-image does nothing particular, which distro/machine are you using? May 11 13:17:37 i created a custom one, they are for the portux920t board May 11 13:28:51 I added libqt-embeddeduitools4-dev to my SDK, but libQtUiTools.a is missing. All I have is a file called libQtUiToolsE.prl. Most of the other libraries are there. May 11 13:31:17 konni: I have a portux920T here, if the recipes are custom it's difficult to guess what you are doing May 11 13:31:57 konni: BTW I did conf/machine/stamp9g20evb.conf ;-) May 11 13:33:29 mckoan: the distro and machine was custom - now i tried the minimal distro and it seems to work better May 11 13:33:35 that works for the board? May 11 13:34:57 konni: which board? portux? you need the proper kernel recipe May 11 13:36:01 mckoan: yep, the portux920T May 11 13:37:02 konni: would you share your portux recipe? May 11 13:37:27 ~pastebin May 11 13:37:28 [~pastebin] A "pastebin" is a web-based service where you should paste anything over 3 lines so you don't flood the channel. Here are links to a few : http://www.pastebin.com , http://pastebin.ca , http://channels.debian.net/paste , http://paste.lisp.org , http://bin.cakephp.org/ , http://asterisk.pastey.net/ , or install pastebinit with yum or aptitude. May 11 13:38:13 mckoan: the machine description for the board? May 11 13:39:02 konni: basically you would need: a machine conf and the linux recipe for portux May 11 13:42:00 mckoan: this is the machine description i used - http://pastebin.com/raw.php?i=Gy5xETi4 - it is from some patcharchive from taskit for an old openembedded version May 11 13:42:41 konni: you need a proper kernel May 11 13:42:49 also May 11 13:44:34 mckoan: well, i dont have one :) May 11 13:44:56 cant i use some kind of generic one? May 11 13:48:36 is there a way to view/list the files in an ipkg package? May 11 13:52:38 nm, dpkg -c seems to work fine May 11 13:53:20 konni: you can't use any generic conf, you must have the correct one for portux May 11 13:56:54 mckoan: ok, would you share your kernel config for portux? May 11 13:57:17 re May 11 13:59:42 konni: I don't have any recipe for portux sorry May 11 14:02:15 mckoan: ok - thanks for the help so far May 11 14:04:21 konni: if I had had the recipe I would have pushed it May 11 14:06:06 mckoan: i can share mine if i get it to work :) - so you cant use your portux920T with openembedded right now? May 11 14:07:17 konni: I have no time at this very moment, however if you'd share your work I'll test it in my spare time May 11 14:07:39 konni: the main goal now it to get a working kernel (2.6.18 IIRC) May 11 14:10:46 konni: looks like a 2.6.22 http://www.armbedded.eu/downloads May 11 14:15:27 mckoan: yes, i will try it May 11 14:28:12 what's the best way to make oe use a prebuilt binary package (let's say it is openssl) instead of building one from sources? May 11 14:45:39 03Roger Monk  07org.openembedded.dev * r6079e5c774 10openembedded.git/recipes/ti/ (ti-codec-engine_2.25.02.10.bb ti-codec-engine_2.25.02.11.bb): May 11 14:45:39 ti-codec-engine: Replace Engineering release with Product v.2.25.02.11 May 11 14:45:39 * v2.25.02 is now released May 11 14:45:39 Signed-off-by: Roger Monk May 11 14:45:39 Signed-off-by: Koen Kooi May 11 14:45:42 03Roger Monk  07org.openembedded.dev * rf8787ed0d7 10openembedded.git/recipes/ti/ (ti-xdais_6.25.02.10.bb ti-xdais_6.25.02.11.bb): May 11 14:45:42 ti-xdais: Replace Engineering release with Product v.6.25.02.11 May 11 14:45:42 * v6.25.02 is now released May 11 14:45:42 Signed-off-by: Koen Kooi May 11 14:45:43 03Roger Monk  07org.openembedded.dev * r5d88154709 10openembedded.git/conf/distro/include/angstrom-codec-engine-2.25.02-preferred-versions.inc: May 11 14:45:43 angstrom-codec-engine-preferred-versions : Update for CE production release (v.2.25.02) May 11 14:45:44 Signed-off-by: Roger Monk May 11 14:45:44 Signed-off-by: Koen Kooi May 11 14:45:45 03Koen Kooi  07org.openembedded.dev * r6b31e8928c 10openembedded.git/recipes/images/beagleboard-linuxtag2010-demo-image.bb: beagleboard-linuxtag2010-demo-image: add image to show at Linuxtag 2010 May 11 14:45:46 03Roger Monk  07org.openembedded.dev * r3e9172fb4c 10openembedded.git/conf/distro/include/ (2 files): May 11 14:45:46 angstrom-codec-engine-preferred-versions: Add 2 new TI 'preferred' configurations (latest/latestproduction) May 11 14:45:46 * 'latest' - latest released versions (includes public early adopter versions) May 11 14:45:50 * 'latestproduction' - latest released versions (only production (GA) release versions) May 11 14:45:50 Signed-off-by: Roger Monk May 11 14:45:50 Signed-off-by: Koen Kooi May 11 14:45:50 03Roger Monk  07org.openembedded.dev * r45f08b22a7 10openembedded.git/recipes/ti/ti-local-power-manager_1.24.02.09.bb: (log message trimmed) May 11 15:17:12 konni: linux-libc-headers may be provided by multiple recipes so you have to choose. Add PREFERRED_PROVIDER_linux-libc-headers = "linux-libc-headers" to your local.conf then bitbake wont pick it from sdk May 11 15:17:31 good morning all May 11 15:23:04 khem: ok thx May 11 16:13:00 Am I correct that a -native recipe installs its files into {$S}/image during do_install, but into {$D} during do_populate_sysroot? May 11 16:17:33 not quite May 11 16:17:49 do_install works like "normal" and is packaged, then installed into the right sysroots/ subdir May 11 16:18:11 ah May 11 16:18:30 I also just realized, {$D} would be the directory of the filesystem image, not the sysroot anyway May 11 16:20:30 khem: hi good morning to you May 11 17:00:47 likewise: hey May 11 17:01:25 was driving in usual bay area traffic May 11 17:06:10 you driving while on IRC? May 11 17:06:37 usual bay area traffic was cool with me May 11 17:07:27 but then... I didn't notice the fast lane needs at least two people seated in the card :-) May 11 17:07:35 s/card/car/ May 11 17:09:40 khem: So, should we bring certain ppc targets down to 4.3.4, try 4.5.0 (which will still probably fail) or what? Haven't seen if csl has this "working", but nothing obvious in their 4.4.1-based diff May 11 17:12:53 khem: As expected, dropping down to 4.3.3 works May 11 17:12:58 er, 434 May 11 17:31:14 Tartarus: gnutls worked for me with 4.4.3 May 11 17:31:21 with the patch May 11 17:31:55 Tartarus:are you doing build from scratch May 11 17:36:13 khem: yes May 11 17:36:39 Tartarus: now I wonder why it builds for me. strange May 11 17:39:35 i'll try again May 11 17:41:34 Tartarus: 4.5.0 is a no go for ppc May 11 17:41:40 I have seen it ICEing May 11 17:41:59 as well as for ARM May 11 17:42:01 me too, iirc May 11 17:42:05 the kernel does not boot May 11 17:42:24 I will debug the kernel oops May 11 17:42:30 in these days May 11 17:42:39 and see which opt is screwing it up May 11 17:42:45 2.6.26 boots fine May 11 17:42:49 but 2.6.33 does not May 11 17:43:10 I guess some code path has changed in such a way the gcc 4.5.0 screws it up May 11 17:43:16 same works fine with 4.4 series May 11 18:42:58 like_bbiab: were you here recently ? and did you drive on 101 between 7am and 9am May 11 18:43:00 :) May 11 18:49:30 khem: I was there about 1 year ago. The Californian 101 is peanuts if you drove in .nl :-) May 11 18:50:21 khem: and your view is MUCH better :-) May 11 18:50:33 I have driven all over europe so I know the difference May 11 18:51:11 101 has been repaved since I landed here first time May 11 18:51:28 my first impression was worse May 11 18:52:07 khem: you have to travel it every day? May 11 18:52:49 yep :( May 11 18:52:53 for about 10 miles May 11 18:53:02 takes me 35 mins on avg May 11 18:54:03 likewise: which city in .nl are you living May 11 18:54:08 khem: Eindhoven May 11 18:54:23 my friend lives in The Hague May 11 18:54:33 I have been to Eindhoven once May 11 18:55:25 i'm having a problem building various images, they all fail at gst-plugins-bad. is there a fix for this or an easy way to avoid needing that package? May 11 18:56:34 khem: if you ever travel to a European event, make sure to let the .eu guys know May 11 18:57:02 likewise: sure. Although I doubt it happening soon May 11 18:57:08 1. I dont like to travel too much May 11 18:57:21 2. my employer has no reason to send me to europe May 11 18:57:49 same here May 11 18:58:10 likewise: although I would like to go there in summer May 11 18:58:14 its just amazing May 11 18:58:35 demon93: give specifics May 11 18:58:56 khem: Same. You have anything else local, other than the optspace thing? May 11 18:59:09 CROSS COMPILE Badness: /usr/include in INCLUDEPATH: /usr/include/libdvdread May 11 18:59:24 Tartarus: hmm strange I dont have anything local May 11 18:59:28 Tartarus: let me double check May 11 18:59:31 i'll sort out a pastebin thing shortly May 11 19:00:34 Tartarus: I have binutils 2.20.1 in my local.conf May 11 19:01:25 Tartarus: and few ASSUME_PROVIDED May 11 19:02:29 try 2.20? or something then? May 11 19:02:36 Or push 2.20.1 and i'll try that May 11 19:03:04 http://www.pastebin.org/222299 May 11 19:03:58 Tartarus: here is my local.conf http://pastebin.com/UyhxJqY8 May 11 19:04:18 my last build that failed was angstrom-gnome-image May 11 19:04:24 Tartarus: yes try 2.20.1 if you could May 11 19:04:29 using mini2440 as machine type May 11 19:04:38 Tartarus: bitbake -c clean binutils-cross;bitbake gnutls May 11 19:05:16 03Koen Kooi  07org.openembedded.dev * r5105018445 10openembedded.git/recipes/opencv/ (opencv-samples_svn.bb opencv_svn.bb): opencv: bump SRCREV May 11 19:05:20 03Koen Kooi  07org.openembedded.dev * r96013fd9b0 10openembedded.git/recipes/images/beagleboard-linuxtag2010-demo-image.bb: beagleboard-linuxtag2010-demo-image: add some more stuff May 11 19:06:11 khem: Will do once you push it. Or am I very out of date? May 11 19:06:26 Tartarus: ugh May 11 19:06:31 let me try that here May 11 19:09:03 likewise: I liked Den Haag very much May 11 19:09:17 likewise: my friend works for NATO so she has free parking :) May 11 19:09:23 sticker May 11 19:10:29 khem: Den Haag is quite nice; nice buildings etc. May 11 19:11:04 likewise: and I enjoyed the bike rides in Amsterdam May 11 19:12:33 khem: that reminds me of the bike ride I did over the Golden Gate bridge to Marin. May 11 19:12:36 hi rwhitby May 11 19:15:50 likewise: yeah or you could have used segways May 11 19:19:17 Tartarus: it builds ok with binutils 2.20 as well May 11 19:20:12 I am fetching the source for a recipe using git. I changed the SRC_URI tag from master to a tag and now it is being fetched every time it is built? May 11 19:21:26 I am setting PV = "${SRCPV}" could this be related. Does anyone know if this is a bug May 11 19:21:58 hmm is SRCPV using AUTOREV or something May 11 19:23:16 not familiar with AUTOREV. I know that when I had tag=master if I pushed something new up it would automatically fetch the new head May 11 19:23:37 likewise: some ppc machines like mpc8313e-rdb and efika need uboot or kernel update if possible otherwise they have to be patched to work with newer gcc May 11 19:28:26 khem: what is the catch with gcc (4.5.0)? May 11 19:30:22 likewise: it segfaults for SPE targets compiling libgcc May 11 19:30:40 when using double gprs May 11 19:30:48 which we have to use for SPE anyways May 11 19:31:00 I have reported it to gcc bugzilla May 11 19:35:37 khem: thanks. I am currently struggling with ARM/Kirkwood (not OE related though), I'll try mpc8313 someday May 11 19:35:50 khem: mpc8313 is e300v2 core AFAIK, not SPE. May 11 19:37:23 likewise: yeah seems so May 11 19:37:40 likewise: the segfaults happen on calamari May 11 19:37:43 Hrm you can't use SRCPV with a tag. Not a big deal. May 11 19:37:58 likewise: mpc8313e-rdb goes further and dies in u-boot May 11 19:38:06 because u-boot needs to be patch or updates May 11 19:38:18 I could patch it but then I have no ppc machine to test it May 11 19:38:35 khem: yes, I saw efFeM / Frans' messages. (He uses my previous development system at my last employer :-) ) May 11 19:38:57 likewise: heh ok May 11 19:39:02 likewise: where are you now May 11 19:39:21 you were doing sat top boxes last time I know May 11 19:39:24 khem: I don't have a way to test u-boot on a MPC831x; I don't have the correct BDM debug (debricker) yet :-) May 11 19:39:29 khem: not me May 11 19:39:48 like or satellite stuff May 11 19:39:48 khem: high-end video equipment, not consumer electronics May 11 19:39:51 one of those May 11 19:40:21 in fact, everything between the camera and satellite uplink, not thereafter May 11 19:40:35 ah so I was not that off radar May 11 19:40:38 fully uncompressed video domain, 3Gb/s :-) May 11 19:40:38 :) May 11 19:40:55 likewise: still doing same ? May 11 19:41:04 khem: no I started my own company last year May 11 19:41:32 mostly embedded linux, and industrial solutions like FPGA IP support May 11 19:43:40 likewise: congrats May 11 19:44:30 khem: thanks May 11 19:44:39 khem: still doing the very same work :-) May 11 19:44:54 minus the traffic jams of course May 11 19:45:02 likewise: yeah I like that May 11 19:45:22 I waste 2 hrs commuting (includes picking kids from school) May 11 19:47:02 khem: Can you push 2.20.1? I wanna try a full from scratch build, i'm still puzzled May 11 19:48:08 Tartarus: is your system x86 or 64bit May 11 19:48:23 Tartarus: you can just select binutils version in your local conf May 11 19:48:26 its already pushed May 11 19:51:24 Tartarus: have a look at my local.conf too May 11 19:51:48 likewise: are you getting the projects from your previous employer too May 11 19:53:44 khem: Yeah, didn't see anything May 11 19:53:47 and 8664 May 11 19:54:27 and thanks, doing now May 11 19:57:03 khem: hmm, no not really May 11 19:57:14 khem: they're not really outsourcing much May 11 19:58:12 likewise: ok. May 11 19:58:54 Tartarus: We can stop building gnutls with -Os May 11 19:59:01 that will be a bandaid May 11 19:59:38 khem: what's your occupation currently? May 11 20:02:04 likewise: I do tools development and maintenance besides changing diapers :) May 11 20:03:12 mostly sounds like fun :-) May 11 20:03:21 dependencies and diapers May 11 20:03:32 yeah heh May 11 20:04:22 also also assist on software bringup for new chips/hardware May 11 20:06:13 Tartarus: I have tried calamari and mpc8313e-rdb both succeed with gnutls May 11 20:10:43 hi,do_stage should me moved in do_install right? May 11 20:10:57 * GNUtoo doesn't remember May 11 20:11:06 or could it be just removed May 11 20:11:22 install -m 0644 ${S}/src/*.h ${STAGING_INCDIR}/matchbox-desktop/ May 11 20:11:26 GNUtoo: Depending, yes. May 11 20:11:29 ok May 11 20:11:34 That needs a little hand holding May 11 20:11:43 ah ok May 11 20:11:57 because this package needs to depend on matchbox-common May 11 20:12:06 and while I'm at it why not fix staging May 11 20:13:23 what should I do then? May 11 20:13:26 look at it May 11 20:13:35 and see if it works automatically? May 11 20:14:00 Kinda, yeah May 11 20:14:09 Need it to install like a normal target package does May 11 20:14:13 into D May 11 20:16:02 ok May 11 20:19:39 did anyone get a chance to look at my problem with gst-plugins-bad? http://www.pastebin.org/222299 May 11 20:21:00 demon93: problem is clear you need to fix include paths May 11 20:21:17 demon93: in gst-plugins-bad May 11 20:23:09 staging/armv6-angstrom-linux-gnueabi/usr/include/matchbox-desktop $ ls => mbdesktop.h mbdesktop_item.h mbdesktop_module.h mbdesktop_view.h May 11 20:23:11 so ship it May 11 20:23:57 thanks a lot Tartarus May 11 20:24:43 np May 11 20:26:22 khem: any more of a clue than that? this is my first linux attempt so i'm not exactly familiar with things May 11 20:27:01 Hi, ALL May 11 20:27:54 is it possible to rebuild the image from scratch? I don't want to update the OE tree, just rebuild everything May 11 20:29:04 I am running GEntoo and in the middle of rebuilding I upgraded the Portage/python. I suspect that this might give the problem with my program crashing May 11 20:29:14 Might it be the problem? May 11 20:30:09 And I know I am stupid so please don't repeat it ;-) May 11 20:34:48 OE is generating a oe_runconf that is using /usr , /usr/bin , etc for cross compile, anyone experienced something like this before? May 11 20:35:44 the target/host options are correct.. May 11 20:41:01 rhc: its ok depending upon where it is using that May 11 20:42:03 IgorK: your best deal is upgrade your build system (correctly) and then wipe out your oe_tmp May 11 20:42:06 and rebuild May 11 20:42:26 IgorK: and use master branch of bitbake if you can May 11 20:42:43 demon93: ok post the log somewhere May 11 20:42:57 demon93: something like log.do_* files May 11 20:43:09 in your build tree for gst-plugins-bad May 11 20:43:22 btw I've also that issue in matchbox: May 11 20:43:31 GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. May 11 20:43:38 that is fixed by installing dbus-x11 May 11 20:43:48 but I don't know which package output that error May 11 20:43:52 khem: those are specified when its cross compiling, and the build fails so i'm pretty sure its wrong May 11 20:44:00 I think I must check but that will be long May 11 20:44:19 I'll search that on the web May 11 20:45:03 rhc: ok show the error and logs somewhere May 11 20:47:46 ok, let me hack on it a bit more and i'll post if i can't figure it out. i'm trying to use old packages to shoe-horn some stuff into a legacy system, so it may not even be worth fixing if i can just hack it up May 11 20:50:51 When bitbake -c clean is run on a -native recipe, should the binaries it installs in sysroot also be deleted? May 11 20:52:31 zenlinuxPDX: With packaged-staging yes, otherwise, no May 11 20:52:53 There might be, if not already, a hook for non-pstaging but also not legacy staging May 11 20:52:57 where it should be possible, i think May 11 20:53:12 Tartarus, thanks, thats what I figured May 11 20:59:44 any idea about the dbus-x11 issue? May 11 21:01:30 maybe grep workdir May 11 21:01:35 that would be very long May 11 21:04:40 GNUtoo: I have seen this error with firefox on my desktop May 11 21:05:07 yes but I wonder where to add the dep,then not in matchbox-something May 11 21:05:11 maybe in gconf May 11 21:05:28 yeah gconf seems best May 11 21:05:31 ok May 11 21:05:52 moreover translation files has things like May 11 21:05:55 GConf Error: May 11 21:06:19 en_GB.po:msgid "GConf Error: %s\n" May 11 21:06:28 thanks a lot khem May 11 21:06:45 khem: log.do_configure http://www.pastebin.org/222633 May 11 21:07:06 log.do_compile http://www.pastebin.org/222634 May 11 21:12:41 # May 11 21:12:44 configure: *** checking feature: dvdnav library *** May 11 21:12:44 # May 11 21:12:44 configure: *** for plug-ins: resindvd *** May 11 21:12:44 # May 11 21:12:44 checking for dvdnav-config... /usr/bin/dvdnav-config May 11 21:12:47 # May 11 21:12:49 configure: *** These plugins will be built: resindvd May 11 21:12:54 that seens hairy May 11 21:18:16 demon93: do you have libdvdread in the deplist for gst-plugins-bad May 11 21:21:10 cbrake, you about? May 11 21:22:51 demon93: try this patch here http://pastebin.com/gPmush0b May 11 21:23:16 demon93: bitbake -c clean gst-plugins-bad; bitbake gst-plugins-bad May 11 21:28:39 Tartarus: If I am stuck with old udev and new devices keeps up popping how can I handle that without mucking with kernel May 11 21:28:42 any idea May 11 21:29:53 not sure sorry May 11 21:31:00 Tartarus: so udev can do it May 11 21:31:34 Tartarus: I guess I need to study how udev does what it does May 11 21:33:48 do you have libdvdread in the deplist for gst-plugins-bad - no idea, i'm building an openembedded image (angstrom-gnome-image) May 11 21:37:33 demon93: ok try what I suggested with that patch May 11 21:40:17 i've just edited the .inc file...i guess that's ok rather than doing something with it as a patch? (as earlier, i'm not yet familiar with building/patching/scripting linux things) May 11 21:55:41 khem: still get the same error as before May 11 22:08:20 GNUtoo|oeee: nobody apart us seems have noticed the quirk in do_setscene May 11 22:08:36 well, and Jama May 11 22:08:37 ah? May 11 22:08:41 03Martin Jansa  07org.openembedded.dev * rcca8167ae3 10openembedded.git/recipes/freesmartphone/ (4 files): May 11 22:08:42 freesmartphone: bump SRCREVs for more gprs fixes and direct sms delivery May 11 22:08:42 Signed-off-by: Martin Jansa May 11 22:08:48 tehse strange parallelism issues May 11 22:08:52 03Martin Jansa  07org.openembedded.dev * rcbaa29791b 10openembedded.git/conf/distro/include/shr-autorev.inc: May 11 22:08:53 shr-autorev: drop fltkspacetrader from AUTOREV May 11 22:08:53 Signed-off-by: Martin Jansa May 11 22:09:23 ant__: seen that lockfile patch from Enrico? May 11 22:09:34 not yet May 11 22:09:42 momo May 11 22:10:16 https://www.cvg.de/people/ensc/bb-lock.patch May 11 22:11:49 I though tI read smthg in the ML but I can't find it May 11 22:12:29 ~ lart epiphany and certificates paranoia May 11 22:13:54 JaMa: do you think this lock is the culprit? May 11 22:15:08 because I still have to reproduce in a deterministic way the failure of gtk+-native May 11 22:15:38 ant__: seems so.. but I haven't check why it appeared with staging changes (expecting Enrico to send it to ML and people who added it to respond) May 11 22:15:38 I can suppose something stalls in do_setscene and the deps get somehow not built May 11 22:16:32 ant__: for me it stalls only when "rebuilding" something -c clean -b recipe_with_stalled_do_setscene always helped here May 11 22:16:46 do you have double logs too? May 11 22:17:59 not sure like with different $$ in the end? May 11 22:19:17 just different id May 11 22:20:08 yes, at the end, suffixes May 11 22:20:17 at least not in evey case May 11 22:20:20 every May 11 22:20:25 now time for bad, sorry May 11 22:20:41 khem: how do you upgrade it properly? and what is master branch of bitbake? is it a development version of bitbake? May 11 22:22:46 IgorK: yes its git master of bitbake May 11 22:23:47 IgorK: git clone git://git.openembedded.net/bitbake May 11 22:25:32 hi khem May 11 22:26:50 ant__: hello May 11 22:28:18 khem: we possibly hit some race in bitbake code :/ building with 4 bbthreads leads repeatedly to a failure with gtk+-...(yes, one can ask why console-image needs pango, cairo, etc.. :/) May 11 22:30:13 khem: and this is all that needed? will I need to compile smth? May 11 22:30:26 so if someone has issues pls try to knock down BB_NUMBER_THREADS May 11 22:31:03 -j5 and 2 threads seems ok May 11 22:31:25 -j5 and 4 threads *always* fails on gtk+-native May 11 22:31:38 also, is there a test program for the GTK+ and the .bb file to build it? May 11 22:33:08 what do you mean with test progrm? May 11 22:35:11 IgorK: yes and make sure that you use this version May 11 22:35:48 ant__: hmm is the gtk build failure consistent May 11 22:36:19 yes May 11 22:36:47 see in the ML May 11 22:37:03 building from scratch May 11 22:37:21 second run has no issues May 11 22:37:54 some very simple program that uses GTK+, something like creat an application and opne the frame window May 11 22:38:35 khem: can u tell me what needs to be done exactly? May 11 22:50:44 IgorK: for what ? May 11 22:51:07 ant__: what error do you get building first time May 11 22:51:41 /modules/input/.libs/im-xim.so: undefined symbol: g_realloc_n May 11 22:51:59 /oe/build/tmp/work/i686-linux/gtk+-native-2.20.0-r8.0/gtk+-2.20.0/modules/input/im-xim.la does not export GTK+ IM module API: May 11 22:52:29 iirc g_realloc_n is glib stuff May 11 22:52:39 ant__: yes May 11 22:52:45 (I just grepped the sources) May 11 22:52:48 :) May 11 22:53:19 khem: and I've noticed For some reasons "atk-native" and "pango-native" builds were not finished when gt+-native was building... May 11 22:53:43 this is the depends: DEPENDS_virtclass-native = "libpng-native atk-native pango-native cairo-native libxrender-native libxext-native" May 11 22:54:07 so glib-2-native must be pulled from one of those May 11 22:55:54 what happens if you explicitly add glib-2-native to this list ? May 11 22:56:42 well...it still fails, no success adding this May 11 22:56:55 but all is ok with 2 threads... May 11 22:57:23 withouth any other edit May 11 22:58:16 so May 11 22:58:38 I suspect some race May 11 23:09:29 khem: to use latest build tools... May 11 23:11:17 what do I do after "git clone <...> bitbake"? May 11 23:11:23 ah May 11 23:11:36 good night May 11 23:11:57 IgorK: add the new bitbake/bin to your path May 11 23:12:01 and remove the old one May 11 23:12:14 or whatever you do to setup the oe env May 11 23:12:29 I have an "/home/arm/OE/bitbake", where I assume bitbake files are located... May 11 23:13:29 if thats where you did git clone then yes May 11 23:14:04 then add /home/arm/OE/bitbake/bin to PATH May 11 23:26:55 khem: also Im guessing that oe_temp is "/home/arm/OE/temp", right? May 11 23:41:04 yes May 11 23:42:10 demon93: can you post new config.log from the new build of gst-plugins-bad May 12 00:06:25 khem: http://www.pastebin.org/223105 May 12 00:08:46 there doesn't seem to be a new config log so i'm going to clean/build again May 12 00:17:50 khem: configure http://www.pastebin.org/223129 May 12 00:18:06 khem: compile http://www.pastebin.org/223130 May 12 00:19:07 thank you for your help, can't stay to see the solution unfortunately, zzz time May 12 00:21:02 demon93zzz: add --disable-resindvd to configure May 12 00:22:46 EXTRA_OECONF_append = " --disable-vdpau --disable-resindvd " May 12 00:22:50 just to test May 12 00:35:05 khem: configure: WARNING: unrecognized options: --enable-introspection, --disable-aalib, --disable-shout2, --disable-resindvd May 12 00:36:07 same result... May 12 00:36:11 | Making all in resindvd May 12 00:36:11 | CC plugin.o May 12 00:36:11 | CROSS COMPILE Badness: /usr/include in INCLUDEPATH: /usr/include/libdvdread May 12 01:14:18 demon93zzz: on .dev it builds fine for me May 12 01:14:25 I dont know what your setup is May 12 01:22:33 my setup: host machine is gentoo, openembedded is git clone from yesterday or the day before, bitbake is 1.8.18, gcc is 4.3.4 (armv4tl-softfloat-linux-gnueabi) from gentoo crossdev May 12 01:23:21 ugh May 12 01:23:35 demon93zzz: why dont you use internal toolchain May 12 01:23:54 ? May 12 01:24:11 what DISTRO May 12 01:24:39 in local.conf? anstrom 2008.1 May 12 01:24:51 here is what I suggest May 12 01:24:59 make DISTRO=minimal May 12 01:25:11 and retry the build from scratch May 12 01:25:16 which MACHINE? May 12 01:25:28 mini2440 May 12 01:25:36 ok May 12 01:25:48 do you want angstrom only ? May 12 01:26:13 all i want is an x server with some gnome May 12 01:26:30 I've recieve a building error May 12 01:26:45 if not then choose DISTRO=minimal and clean the oe tmp dir May 12 01:26:49 ERROR: function do_deploy failed ERROR: log data follows (/home/jemp/work/oe/build/tmp/work/ts72xx-angstrom-linux-gnueabi/linux-2.6.27-r14/temp/log.do_deploy.6427) | install: cannot create regular file `/home/jemp/work/oe/build/tmp/deploy/glibc/images/ts72xx/zImage-2.6.27-r14-ts72xx.bin': Permission denied May 12 01:26:50 and then bitbake x11-image May 12 01:27:00 i've had the gst-plugins-bad error since i started with oe about 2 or 3 weeks ago May 12 01:27:16 demon93zzz: I dont get this error May 12 01:27:25 but then I dont use minimal May 12 01:27:33 I mean I dont use angstrom May 12 01:27:40 and it builds for me May 12 01:28:17 is there another image i can build that gives me a basic gnome setup? May 12 01:29:08 I dont know if you can avoid gst-plugins-bad May 12 01:29:15 you can check the dep chain May 12 01:29:26 and remove the packge May 12 01:29:38 i'm currently building with gst-plugins-bad commented out in various bb's May 12 01:29:40 which is pulling in this May 12 01:29:46 oh May 12 01:29:55 demon93zzz: another thing you could try is this May 12 01:29:55 on task 7992 out of 10000 or so May 12 01:30:07 oh ok May 12 01:30:11 so you might go thru May 12 01:30:30 it's not looking too bad at the moment, it's gone past where it has failed in the past May 12 01:31:07 i don't need gstreamer so it doesn't matter that it might not work :-) May 12 01:31:46 time for zzzs...2.30am :-( May 12 01:32:03 hopefully i'll wake up with 0 failed :-) May 12 01:32:04 khem, can u give me a hand? May 12 01:34:21 anyone got time to give me a hand? May 12 01:34:27 I am stuck on this error May 12 01:34:41 ERROR: function do_deploy failed May 12 01:34:58 ERROR: log data follows (/home/jemp/work/oe/build/tmp/work/ts72xx-angstrom-linux-gnueabi/linux-2.6.27-r14/temp/log.do_deploy.6427) | install: cannot create regular file `/home/jemp/work/oe/build/tmp/deploy/glibc/images/ts72xx/zImage-2.6.27-r14-ts72xx.bin': Permission denied May 12 01:39:53 did you check to see what the permissions are? And who owns that directory? (Perhaps you rant the build as root at one point?) May 12 01:47:25 how do i change that back? May 12 01:50:45 delete /home/jemp/work/oe/build/tmp and start over, is the best way. May 12 02:02:12 thx May 12 02:02:13 it work May 12 02:06:54 hey guys May 12 02:07:07 I'm having troubles with an SPI driver and not sure where to look May 12 02:07:10 Any ideas? May 12 02:08:03 My problem is that instead of a chip select style signal, I need a signal a conversion on the falling edge of chip select **** ENDING LOGGING AT Wed May 12 02:59:56 2010