**** BEGIN LOGGING AT Fri Jun 11 02:59:57 2010 **** BEGIN LOGGING AT Fri Jun 11 04:19:31 2010 Jun 11 06:01:26 hi , i m having problem on psplash , i tried to install new psplash from my ipk file but i got error : * Package psplash md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'. Jun 11 06:12:43 Deviatorr, there is an md5sum for the .ipk listed in your package list and it doesn't match the md5sum of the .ipk that it references. Jun 11 06:13:15 this might be because the package has been changed without chaning the revision number Jun 11 06:13:25 s/chaning/changing/ Jun 11 06:19:33 morning Jun 11 06:19:39 or rather without regenerating index in feed (even with changed PV/PR, index is not regenerated automatically) Jun 11 06:19:43 tsjsieb: morning Jun 11 06:20:48 JaMa, true, but the old md5sum in the index should still match the old file in the repository Jun 11 06:23:28 grg: right Jun 11 06:24:21 but it's quite easy to find packages changing md5sum after rebuild Jun 11 06:24:46 ie eglibc/gcc is updated a bit without bumping DISTRO_PR everytime.. Jun 11 06:25:23 yes, its rather annoying that so many projects include an autogenerated date stamp in a header or some such thing Jun 11 06:26:41 I just regenerate index after every build which could be installed on target... Jun 11 06:59:44 mmm... its friday 4:30pm and monday is a public holiday :) Jun 11 06:59:53 makes it hard to get any work done right now Jun 11 07:00:31 grg: watch the soccer world cup Jun 11 07:00:50 khem, nah. Going camping instead. Jun 11 07:01:32 grg: even better Jun 11 07:05:50 good morning Jun 11 07:20:18 hi Jun 11 07:20:44 is there a way to let bitbake output all command it is executing when its building a package? Jun 11 07:20:52 command/commands Jun 11 07:26:31 puchu: ie log.do_compile.$$ in temp dir is not enough? Jun 11 07:27:44 yeah i could look at it but there is no way to let oe output it at compile time? Jun 11 07:27:51 @JaMa Jun 11 07:29:33 ah.. don't know, but bitbake-1.10 shows it in its output in case of failure.. Jun 11 07:59:13 hi Jun 11 08:23:03 re Jun 11 08:23:31 Anyone here who knows about our MediaWiki? Jun 11 08:37:52 hi Khem, when testing for qemu, which distro / image are your using ? micro & minimal-image ? Jun 11 08:40:31 is openembedded usinf qemu to compile the images? Jun 11 08:45:08 puchu: no.. only for some special tasks like locale generation in libc and something in emacs (maybe few more cases) Jun 11 08:45:55 ohh okay Jun 11 08:47:21 puchu: and if you were asking because of eriben's question then there are qemu based "machines" in conf/machine, so you can build custom image for usage from qemu Jun 11 09:11:41 hi Jun 11 09:12:34 moin woglinde Jun 11 09:13:43 Hi, Nikunj here , from Bangalore - India... I am not able to clone openembedded using "$git clone http://git.openembedded.org/openembedded" or "git clone http://repo.or.cz/r/openembedded.git" . I also have exported http_proxy variable. any ideas.? Jun 11 09:13:58 morning Jun 11 09:14:02 hi jay7 Jun 11 09:15:05 03Martin Jansa  07org.openembedded.dev * r731e6defe6 10openembedded.git/conf/distro/include/sane-srcrevs.inc: Jun 11 09:15:05 opkg: bump SRCREV for better fix of #50 (incorrect removal of orphaned files) Jun 11 09:15:05 * http://code.google.com/p/opkg/issues/detail?id=50 Jun 11 09:15:05 Signed-off-by: Martin Jansa Jun 11 09:20:22 nikunj: what goes wrong when you try? Jun 11 09:20:50 It says: "Initialized empty Git repository in /home/nikunj/ope/openembedded/.git/ error: Couldn't resolve host 'git.openembedded.org' while accessing http://git.openembedded.org/openembedded/info/refs fatal: HTTP request failed" Jun 11 09:21:51 I have tried changing /etc/resolve.conf file too.. putting in google's dns (8.8.8.8) and all possible combos. Jun 11 09:22:10 firewall and SELinux both are disabled. Jun 11 09:22:44 well, if it can't resolve the hostname then that does indicate some problem with your local network setup. Jun 11 09:23:04 I cant ping google.com too..! Jun 11 09:23:27 pb__ :what to do to resolve it.? Jun 11 09:24:17 nikunj you can ping it? Jun 11 09:24:23 pb__:further, "svn co" also not working.. ( to install psyco jit compiler ) Jun 11 09:25:00 florian: hi, what about wiki Jun 11 09:25:01 woglinde: no, it says "unkown host" Jun 11 09:25:15 nikunj then your namserver is borken Jun 11 09:25:30 I tried putting in googles dnd also.. Jun 11 09:25:35 dns* Jun 11 09:26:37 Name: git.openembedded.org Jun 11 09:26:37 Address: 140.211.169.165 Jun 11 09:27:52 woglinde: He will have huge problem downloading sources unless he gets his dns issues resolved Jun 11 09:28:05 gaston right Jun 11 09:29:00 woglinde : A stu question.. can you tell me how to actually add entries in resolve.conf file.? Jun 11 09:29:27 nikunj depends Jun 11 09:29:32 it may networkmanager Jun 11 09:29:37 or dhcp-client Jun 11 09:30:02 it says generated by " generated by /sbin/dhclient-script" Jun 11 09:30:03 Jay7: robert added seom news but it doesn't show up at the main page Jun 11 09:30:47 ah.. you mean oe wiki Jun 11 09:31:03 I thought about ltg wiki ;) Jun 11 09:31:08 woglinde : I am putting "nameserver 8.8.8.8" as an example. Jun 11 09:31:15 JaMa: heh no Jun 11 09:35:33 woglinde: you there ? Jun 11 09:35:43 yes Jun 11 09:35:52 dont know which namserver your company use Jun 11 09:35:58 dont have a crytal ball Jun 11 09:36:02 crystall Jun 11 09:36:32 so, apart from git clone..no other way to get the openembedded source.. no direct link to download..? Jun 11 09:39:29 nikunj, I would start looking at that script that generated your resolv.conf. Next I would ask or search for help in your distribution specific channels/manuals. Jun 11 09:40:14 Gaston :cool.. Jun 11 09:52:01 03Martin Jansa  07org.openembedded.dev * r85ea6cc539 10openembedded.git/recipes/shr/shr-e-gadgets_git.bb: shr-e-gadgets: bump SRCREV for more sleep Jun 11 09:57:41 nikunj if you want to update easy and contribute use git Jun 11 09:57:48 all other is pain Jun 11 10:35:06 woglinde : I am following "http://www.emilsit.net/blog/archives/how-to-use-the-git-protocol-through-a-http-connect-proxy/" link . It seems to work with me. Jun 11 10:40:17 hi mickey|linuxtag Jun 11 10:40:44 morning pb_ Jun 11 11:19:28 03Mike Westerhof  07org.openembedded.dev * ra7bcc78ad9 10openembedded.git/recipes/tasks/task-slugos.bb: Jun 11 11:19:28 SlugOS: task-slugos.bb - Adjust packages to fit in available flash space. Jun 11 11:19:28 Install only sshd and keygen, rather than the full ssh package, Jun 11 11:19:28 and (temporarily) remove the RAID/mdadm support. Necessary to make Jun 11 11:19:28 space in the flash filesystem until the root cause (util-linux-ng Jun 11 11:19:29 bogus dependency issue) is located and fixed. Jun 11 11:20:42 03Robert Schuster  07org.openembedded.dev * r5356193d0f 10openembedded.git/recipes/llvm/ (llvm.inc llvm2.7/link.patch llvm2.7_2.7.bb): Jun 11 11:20:42 llvm.inc: fixed typo. Jun 11 11:20:42 llvm2.7 2.7: Build with shared library, added patch to work around not correctly linking libgcc. Jun 11 11:31:00 03Stefan Schmidt  07org.openembedded.dev * ra70f2d4f59 10openembedded.git/recipes/linux/linux-zigbee_git.bb: linux-zigbee: Bump rev to fix some problems with channel setting in 802154 Jun 11 13:41:51 03Koen Kooi  07org.openembedded.dev * r725c273d05 10openembedded.git/recipes/psplash/psplash-zap_1.0.bb: psplash-zap: ${SPLASH} is an image var so don't make a *package* depend on it, it kills the ability to use different splashes in different images Jun 11 13:44:21 Hi, I am trying to build "console-image" with "omap5912osk" and "angstrom" distro. after bit of parsing .. it says "coreutils-native_8.5.bb' failed"... and came out of building. ! any ideas guys..? Jun 11 13:50:01 hi khem /IMAW Jun 11 13:50:08 oops sorry Jun 11 14:07:48 mckoan|away: hello Jun 11 14:09:00 03Dmitry Eremin-Solenikov  07org.openembedded.dev * r7604d56950 10openembedded.git/conf/machine/lite5200.conf: Jun 11 14:09:00 lite5200: update machine config Jun 11 14:09:00 Update Lite5200 board config with correct console definition, kernel provider Jun 11 14:09:00 and kernel image. Jun 11 14:09:00 Signed-off-by: Dmitry Eremin-Solenikov Jun 11 14:09:02 03Dmitry Eremin-Solenikov  07org.openembedded.dev * r62ed27a31a 10openembedded.git/recipes/linux/ (linux-2.6.34/lite5200/defconfig linux.inc linux_2.6.34.bb): Jun 11 14:09:02 linux-2.6.34: add support for Lite5200 board Jun 11 14:09:02 Signed-off-by: Dmitry Eremin-Solenikov Jun 11 14:26:25 huhu Jun 11 14:26:56 in ipk terms, 0.8.0-alpha1 is higher than 0.8.0, is that correct? Jun 11 14:39:02 Jin^eLD: yes thats correct Jun 11 14:39:42 khem: how would I correctly tag alpha releases? Jun 11 14:39:59 so that the "real" 0.8.0 becomes highest once it is out? Jun 11 14:40:12 hi khem, when testing for qemu, which distro / image are your using ? micro & minimal-image ? Jun 11 14:40:41 Jin^eLD: see the fine manual Jun 11 14:40:43 http://docs.openembedded.org/usermanual/html/recipes_advanced_versioning.html Jun 11 14:41:05 eriben: distro is either minimal or minimal-uclibc depending on what I want and image is native-sdk-image Jun 11 14:41:05 thanks, reading... Jun 11 14:41:33 or, alternatively, I think "0.8.0~alpha1" will also work in opkg terms, although oe itself might not do quite what you want. Jun 11 14:41:58 khem: thanks, what are the main differences between distro minimal and distro micro ? Jun 11 14:42:35 pb_: thanks, I'll try, the explanations in the manual also make sense Jun 11 14:43:02 eriben: two I know 1. it does not use package management 2. it flattens the /usr dir Jun 11 14:43:07 like GNU hurd Jun 11 14:43:31 khem: which one ? micro ? Jun 11 14:44:20 yes micro Jun 11 14:44:29 hey, i have a board here with an atmel 9263 processor. it has a preinstalled oe distribution. can i find out by analyzing the binaries which target architecture was taken in oe? (i want to build an additional package for this system on a new oe environment) Jun 11 14:44:56 khem: ok thanks, I'll test minimal Jun 11 14:51:12 hi, I have problem building console-image for atngw100, libmad fails with some asm errors. log.do_compile is here http://wklej.org/id/349103/ Jun 11 15:02:28 ericben|away: cool Jun 11 15:04:26 hi zecke Jun 11 15:05:01 saftsack: do u mean processor arch? Jun 11 15:05:27 khem, i use machine = "at91sam9263ek" is this correct? Jun 11 15:05:56 the processor is an atmel at91sam9263. Jun 11 15:06:55 but how to find out, what distribution is installed there? are there some hints to find this out? the systems size is 4.4mb and uses kernel 2.6.24 Jun 11 15:09:33 saftsack: hmmm anything in /etc/motd Jun 11 15:09:59 nothing there Jun 11 15:10:13 soltys: this error means that there is problem in inline assembly Jun 11 15:10:22 -rw-r--r-- 1 root root 0 Jan 13 22:46 /etc/motd Jun 11 15:11:31 khem: do you know how to fix that? or should I try other minimal image for that machine ? Jun 11 15:11:47 soltys: which gcc version is it Jun 11 15:12:03 saftsack: do ls /lib/libc* Jun 11 15:12:33 saftsack: and when kernel boots it must say which compiler was used to compile it Jun 11 15:13:00 khem: 4.2.2 Jun 11 15:13:02 brb Jun 11 15:13:04 /lib/libc-2.5.so /lib/libc.so.6 <5>Linux version 2.6.24.7 (mha@hareangle-saturn) (gcc version 4.1.2) #2 PREEMPT Thu Jul 2 15:42:14 CEST 2009 Jun 11 15:14:40 saftsack: if you choose gcc 4.1.2 glibc 2.5 and linux headers 2.6.23 Jun 11 15:14:49 that should be close enough Jun 11 15:15:15 ok, nice thanks :). is there a distro which is similar to this? Jun 11 15:16:07 saftsack: I dont know off hand Jun 11 15:16:26 saftsack: but I think my best quess will be use stable.2008 or something Jun 11 15:16:51 saftsack: We dont have enough people testing older version of toolchain on .dev Jun 11 15:16:59 so they might be broken in ways Jun 11 15:17:34 soltys: IIRC there was some inline asm bug in gcc 4.2 for avr Jun 11 15:17:43 I dont recall if it was same as what you see Jun 11 15:18:32 khem, BusyBox v1.2.1 (2009.01.13-21:50+0000) multi-call binary Jun 11 15:18:42 seems some new busybox ... strange Jun 11 15:21:24 and how can i see if my binaries are in the EABI form? Jun 11 15:23:14 khem: that's bad.. Jun 11 15:28:30 khem, where can i force special gcc, linux-headers and gcc versions? Jun 11 15:44:46 saftsack: PREFERRED_VERSIONS Jun 11 15:45:14 ah, ok thank you. and overall angstrom-2008.1? Jun 11 15:45:29 soltys: can you preprocess the file in question and put it somewhere I can see Jun 11 15:45:49 saftsack: may be Jun 11 15:46:07 saftsack: I was suggesting to use a old stable branch Jun 11 15:47:12 khem: how to? Jun 11 15:47:38 add -E option Jun 11 15:47:42 tried a stable branch but where is a list? in the oe wiki no stable is listed. is there a good tutorial for openembedded? the wiki isnt full with informations Jun 11 15:47:45 * khem has to run Jun 11 15:51:48 PREFERRED_VERSION_gcc = "4.1.2" Jun 11 15:51:49 PREFERRED_VERSION_glibc = "2.5" Jun 11 15:51:49 PREFERRED_VERSION_linux-headers = "2.6.23" Jun 11 15:51:51 this way? Jun 11 15:59:50 khem, can i place preferred version in the local.conf? Jun 11 16:05:17 03Tom Rini  07org.openembedded.dev * r3a16ab45be 10openembedded.git/recipes/psplash/psplash-zap_1.0.bb: Jun 11 16:05:17 psplash-zap: Recommend virtual-psplash not psplash-angstrom Jun 11 16:05:17 Signed-off-by: Tom Rini Jun 11 16:18:49 git -track -b stable/2008 origin/stable/2008 Jun 11 16:18:57 is this the stable 2008 which you mean khem? Jun 11 17:10:13 saftsack: yes Jun 11 17:10:32 saftsack: you can also use latest .dev but you might run into problems Jun 11 17:10:39 as the versions have moved Jun 11 17:11:08 saftsack: what do you want to do ? compile an application for the existing rfs or build the complete rfs Jun 11 17:11:13 of your own Jun 11 17:11:42 soltys: there ? Jun 11 17:19:17 03Stefan Schmidt  07org.openembedded.dev * r7f0c67d205 10openembedded.git/recipes/u-boot/ (files/bug20/bug-video-setting.patch u-boot_git.bb): u-boot_git: Add patch for BUG20 HDMI video setting. Bump PR. Jun 11 17:21:48 Can anyone of the stable maintainers have a look at the checksums in recipe patch for stable? Jun 11 17:21:59 It would ease syncing between stable and dev a lot Jun 11 17:22:26 Vitus already did all the work to bring it over. All that is needed is some review and another ack (mine is already there) Jun 11 17:38:10 Quick question: Does anyone know if this is a known issue or just me? cp: cannot stat `blah/pkgdata/armv7a-angstrom-linux-gnueabi/tslib': No such file or directory, when trying to use libts-dev in an SDK build? I can’t see why it is even looking for that file in pkgdata? Jun 11 18:19:44 khem, i wonder what kind of drugs the guy was on who did this: nm --def lib/libpthread-*.so | grep __libc Jun 11 18:21:13 03Koen Kooi  07org.openembedded.dev * rcda57b02fb 10openembedded.git/recipes/psplash/psplash-zap_1.0.bb: psplash-zap: fix another regression for angstrom Jun 11 20:27:06 nikunj: what was the eror message Jun 11 20:28:19 http://book.git-scm.com/index.html seems nice Jun 11 20:28:37 nikunj: If it is not solved yet :) Just saw that I got this from my previous log :) Jun 11 21:41:28 * Jay7 have found what was problem with neon and kerberos Jun 11 21:42:04 neon configure assumed --with-gssapi and found krb5-config on host fs Jun 11 21:42:32 do anybody uses neon with gssapi? Jun 11 21:43:06 khem, i want to build an application for an existing rfs Jun 11 21:43:53 * Jay7 wish to add --without-gssapi to neon's EXTRA_OECONF Jun 11 21:49:20 http://nopaste.info/705cd905c8.html Jun 11 21:50:22 some ideas regarding this error? Jun 11 21:52:44 sudo sysctl vm.mmap_min_addr=0 Jun 11 21:53:10 and try again :) Jun 11 21:53:11 what qemu are you using? Jun 11 21:53:19 oe.dev one dont need it Jun 11 21:54:25 Jay7, nice, thanks :) Jun 11 21:54:56 woglinde, i use 2009 stable because i have to build an application (ppp) for an old existing system Jun 11 21:58:14 saftsack hm either you use ASSUMED_PROVIDED += "qemu-native" in local.conf and use your system qemu which should be fine on actual distros Jun 11 21:58:19 or do as jay7 said Jun 11 21:59:14 woglinde, it still works with Jay7's method, but thanks for your guess, too. i will try it the next time. it seems to be more statically. Jun 11 21:59:27 sure jay7 works Jun 11 21:59:35 was the old method for old qemu Jun 11 21:59:40 another question. does oe build the kernel with ppp support? Jun 11 22:00:22 * Jay7 works :) Jun 11 22:02:29 saftsack depends on the kernel config Jun 11 22:02:50 lookinto recipes/linux/linux-version/machine/defconfig Jun 11 22:03:38 i have an existing system which was created with openembedded. i know nothing about it. that's the problem. now i am building in a crosscompiler environment ppp. but i don't know if it will work ... Jun 11 22:04:47 hm normaly its enabled in all configs Jun 11 22:06:51 * Jay7 -> sleep Jun 11 22:07:44 good nite jay7 Jun 11 22:26:08 saftsack: you might disable building locales completely Jun 11 22:26:42 saftsack: add ENABLE_BINARY_LOCALE_GENERATION = "0" to your local.conf Jun 11 22:26:46 khem, that would be a good idea. the pc still builds the locales .... (core i5 processor) Jun 11 22:26:47 thanks :) Jun 11 22:27:24 khem, can i strg+c and restart it without problems now? Jun 11 22:29:38 hi khem Jun 11 22:29:54 saftsack: yes Jun 11 22:29:59 woglinde: hey there Jun 11 22:30:32 todays matches were not that exciting Jun 11 22:31:02 yes Jun 11 22:31:16 but I was at the international air show here Jun 11 22:31:21 that was pretty good Jun 11 22:31:26 seeing euro fighter in action Jun 11 22:32:24 woglinde: cool Jun 11 22:32:31 woglinde: were you at lnxtag Jun 11 22:33:34 how was it ? how was OE booth were people interested ? Jun 11 22:36:30 khem, i went to a stable branch like you said. now i build angstrom. but is it possible to build a minial system? i just want to build a ppp.ipk package. nothing more. but bitbake ppp want to do more than 1400 tasks. at the moment it builds some gnome things ... Jun 11 22:37:03 saftsack: well if it wants then it wants Jun 11 22:37:06 http://nopaste.info/0f1c91f429.html that's my local.conf Jun 11 22:37:21 saftsack: you better get all dependencies built first Jun 11 22:37:33 saftsack: but doing bitbake ppp is the best you can do Jun 11 22:37:41 ok, thanks Jun 11 22:38:59 saftsack: you said you have core i5 Jun 11 22:39:15 it should not be more than a couple of hours I guess Jun 11 22:39:41 i hope ;) Jun 11 22:39:51 saftsack: there are some dependencies that gets pulled in unnessarily Jun 11 22:40:00 but then you will diverge the issue Jun 11 22:40:09 and will end up fixing a lot more Jun 11 22:40:21 for best results let the default do the stuff Jun 11 22:40:27 and do the minimal thats needed Jun 11 22:40:29 no script can be perfect for all things Jun 11 22:40:30 does that sound right ? Jun 11 22:40:35 yes Jun 11 22:40:43 alright good luck Jun 11 22:40:44 i hope the binary will run ;) Jun 11 22:40:47 thanks ;) Jun 11 22:40:57 it will dont worry Jun 11 22:41:12 first thing is if it will get built in first place Jun 11 23:02:55 ./tmp/deploy/glibc/ipk/armv5te/ppp_2.4.3-r5.1_armv5te.ipk :) Jun 11 23:08:25 pppd: This system lacks kernel support for PPP. Jun 11 23:09:34 khem, how to build a kernel with OE? Jun 11 23:34:20 built the kernel now. can somebody help me what to do, if it doesnt boots? the last line i can see is: "Starting kernel ..." Jun 11 23:34:29 then it is death Jun 11 23:42:40 seems you dont define serial console right Jun 11 23:42:50 via cmdline Jun 11 23:43:09 i do "setenv bootargs mem=32M console=ttyAT0,115200 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 ro" Jun 11 23:43:23 the currently installed kernel boots with this commandline. Jun 11 23:45:08 hm then your kernel is maybee miscompiled Jun 11 23:45:23 differ the .config's Jun 11 23:45:35 tried several kernels :(. the other kernel runs fine on another at91sam board. Jun 11 23:45:51 may it is too big? the original kernel is at 1.4mb. my other is at 1.8mb Jun 11 23:46:01 maybe this is the fault? but the board has 32mb-ram Jun 11 23:47:12 maybee Jun 11 23:47:19 dont know it Jun 11 23:47:28 woglinde, i don't have the .config for the installed kernel. woglinde how can i find out, if it is too big Jun 11 23:50:20 hm the one which is running? Jun 11 23:50:41 if you are lucky the kernel has compiled in /proc/config.gz support Jun 11 23:50:50 take it from there Jun 11 23:51:07 try it, wait a second please Jun 11 23:51:25 no :( no config.gz Jun 11 23:54:34 hm sorry Jun 11 23:54:53 i see that the original kernel is started from another memory address ... that's is somehow strange Jun 11 23:55:36 Load address: 0x21000000 that seems to be the default load address. but the stock kernel starts at ## Booting image at 10060000 ... Jun 12 00:01:10 -> start = 0x20000000 Jun 12 00:01:10 -> size = 0x02000000 Jun 12 00:01:31 just for understanding. are this bytes in hex? Jun 12 00:02:37 yes Jun 12 00:04:57 ok, so i have exactly 32mbyte of dram. if i put a kernel image to 0x21000000 then it can't be to large, or? Jun 12 00:05:12 yeah Jun 12 00:05:18 1.9mb compressed can not be more than about 29 left mbytes uncompressed Jun 12 00:06:38 hm Jun 12 00:06:58 sorry to late for me to count something Jun 12 00:07:07 no problem ;) Jun 12 00:26:38 woglinde, WORKS :) ttyS1 did the job Jun 12 00:26:50 hehe Jun 12 00:26:52 as I said Jun 12 00:27:18 hm but at login you should have seen a console Jun 12 00:27:33 because getty-stuff handle it differently Jun 12 00:28:07 still getting a kernel panic atm ... ;) so that's the reason of the console ;) Jun 12 00:28:29 hm rootfs not found? Jun 12 00:28:41 hm yes Jun 12 00:28:48 the panic is kernelkontext Jun 12 00:29:26 kernel is searching for nand, but i have a nor flash ;) Jun 12 00:29:32 lol Jun 12 00:29:42 go back to defconfig Jun 12 00:29:55 or use right rootfs cmdline Jun 12 00:30:05 it is a kernel from another at91sam9263 board with nand ;). now i will take the OE kernel Jun 12 00:30:16 (tried first this one because i knew that it works ;) ) Jun 12 00:30:18 good luck Jun 12 00:30:21 ah okay Jun 12 00:30:21 thanks Jun 12 00:32:56 same issue. woglinde where can i configure the kernel in OE? Jun 12 00:33:44 hm I already told you Jun 12 00:33:52 go to recipes/linux Jun 12 00:33:58 find -name "defconfig" Jun 12 00:38:22 thanks, Jun 12 00:38:29 wow there are many MTD options. Jun 12 00:38:36 yes Jun 12 00:38:55 but i need physmap Jun 12 00:39:25 so I am not such an expert with the nor stuff Jun 12 00:39:28 http://lxr.free-electrons.com/source/drivers/mtd/maps/physmap.c?v=2.6.28 Jun 12 00:43:00 woglinde, if i changed the defconfig, will the system recognize this change when i do "bitbake virtual/kernel"? Jun 12 00:43:09 no Jun 12 00:43:17 only when you bump PR Jun 12 00:43:32 sorry, bump PR? Jun 12 00:43:57 add +1 Jun 12 00:44:26 yes but what do you mean with PR? Jun 12 00:45:11 go to recipes Jun 12 00:45:13 grep -r PR Jun 12 00:45:15 grep -r PR * Jun 12 00:45:37 ah ok ;) Jun 12 01:20:27 woglinde, i go to bed now. too tired. thanks for your help, it was very nice from you :). Jun 12 01:27:44 sure **** ENDING LOGGING AT Sat Jun 12 02:59:56 2010