**** BEGIN LOGGING AT Sun Oct 31 02:59:58 2010 Oct 31 09:18:44 hi, i don't know where to ask, so i'm asking here.... yesterday i've got a new receiver for my tv. it has a usb port and if i put a usb stick in there, the receiver says it's "uda1", this sounds like linux. the receiver is a "smart cx04" Oct 31 09:19:02 does anyone of you know if theres a linux running on it? or where to find out more? Oct 31 09:25:19 krumeltee: well rip it apart and see what's inside Oct 31 09:25:42 though uda1 sounds more BSD-ish Oct 31 09:26:41 hi Oct 31 09:28:34 I'm fighting with a lib recipe. This is for qwt (addon library over qt). actually libqwte5 + libqwte-dev are generated. But I don't maange to find the right name to use to integrate the lib in the sdk. Actually using qwte-dev (the recipe is named qwte) leads to Cannot satisfy the following dependencies for task-qte-toolchain-target: libqwt-dev Oct 31 09:28:40 any idea on how to solve this ? Oct 31 09:29:12 the problem is that there are 2 recipes fro qwt : one using qt-x11 (recipe : qwt) and one using qtembedded (recipe qwt-e or qwte, tried both) Oct 31 09:29:32 i've opened it, over the cpu is a piece of copper soldered, theres a 4 pin header (soldered) an an unsoldered 4 pin header. the one next to the cpu has 5V on two of the pins, on the other is no voltage Oct 31 09:29:45 and it seems bitbake "links" qwte-dev to libqwt-dev Oct 31 09:31:01 i'll try to find a max3232/232 and to figure out if this is a serial port Oct 31 09:31:23 krumeltee: can be a header for a fan :) Oct 31 09:32:59 ooooh shit, the wires go from the cpu to this header and then to the usb port.... Oct 31 09:33:11 the 2 pins in the middle of the port, usb data Oct 31 09:35:37 damn, why didn't i look for a serial port when i bought it... Oct 31 09:40:23 http://img821.imageshack.us/img821/6789/pic0026y.jpg Oct 31 09:41:36 on the six pix header theres one pin for gnd, the other are all 3.3v, but with a 10k resistor in series on each pin Oct 31 09:47:47 ...it has a 4mb 25l3205 serial flash... Oct 31 10:56:31 03Denis 'GNUtoo' Carikli  07org.openembedded.dev * rde71b5ccf9 10openembedded.git/recipes/base-files/ (base-files/nokia900/fstab base-files_3.0.14.bb): Oct 31 10:56:31 base-files: add fstab for nokia900 and bump PR Oct 31 10:56:31 The standard fstab lacked an entry for the 32GB one NAND Oct 31 10:56:31 Signed-off-by: Denis 'GNUtoo' Carikli Oct 31 10:57:29 03Roman I Khimov  07org.openembedded.dev * r1218fb1420 10openembedded.git/recipes/valgrind/ (valgrind_3.2.1.bb valgrind_3.2.3.bb valgrind_3.3.1.bb): Oct 31 10:57:29 valgrind: remove versions prior to 3.6.0 Oct 31 10:57:29 If you're using valgrind, you probably want latest and versions removed with Oct 31 10:57:29 this patch are 2+ years old. Oct 31 10:57:29 Signed-off-by: Roman I Khimov Oct 31 12:46:49 03Martin Jansa  07master * rb457e1c001 10openembedded.git/recipes/freesmartphone/frameworkd_git.bb: Oct 31 12:46:49 frameworkd: bump SRCREV again Oct 31 12:46:49 Signed-off-by: Martin Jansa Oct 31 13:07:10 well.. let's attach to testing process Oct 31 13:48:47 03Eric Bénard  07org.openembedded.dev * rda60830cc1 10openembedded.git/recipes/busybox/files/usb.sh: Oct 31 13:48:47 usb detection script Oct 31 13:48:47 remove echo which should not be there Oct 31 13:48:47 Signed-off-by: Eric Bénard Oct 31 13:48:58 03Eric Bénard  07org.openembedded.dev * r2af9fd7868 10openembedded.git/recipes/qt4/ (qt-4.7.0.inc qt4-embedded_4.7.0.bb): Oct 31 13:48:58 qt-4.7: rename qtdemo to qtdemoE for qt4-embedded Oct 31 13:48:58 in order to stay consistant with 4.6.x releases. Oct 31 13:48:58 Signed-off-by: Eric Bénard Oct 31 13:48:59 Acked-by: Denys Dmytriyenko Oct 31 14:21:27 03Martin Jansa  07master * r924244aaaa 10openembedded.git/recipes/linux/ (4 files in 3 dirs): Oct 31 14:21:27 linux-openmoko-2.6.34: enable 3D engine and update jitterless patch Oct 31 14:21:27 Signed-off-by: Martin Jansa Oct 31 14:21:37 03Martin Jansa  07master * rce8a0216ae 10openembedded.git/recipes/tasks/task-shr-feed.bb: task-shr-feed: add setxkbmap Oct 31 14:31:32 03Koen Kooi  07org.openembedded.dev * rd1e63916de 10openembedded.git/recipes/webm/libvpx_0.9.5.bb: libvpx: add 0.9.5 Oct 31 15:11:09 03Martin Jansa  07master * r12357ae2f3 10openembedded.git/recipes/mokomaze/mokomaze_0.5.5.bb: Oct 31 15:11:09 mokomaze: don't set RDEPENDS_${PN}_shr as it overwrites RDEPENDS from .so providers Oct 31 15:11:09 * as work around use RRECOMMENDS instead Oct 31 15:11:09 Signed-off-by: Martin Jansa Oct 31 15:11:20 03Sebastian Krzyszkowiak  07master * r5fb62a67b1 10openembedded.git/recipes/mokomaze/ (2 files in 2 dirs): Oct 31 15:11:20 mokomaze: fix vibration on gta02 with 2.6.34 kernel Oct 31 15:11:20 Signed-off-by: Martin Jansa Oct 31 15:45:07 hi eFfeM Oct 31 15:46:10 hi ericben, all Oct 31 15:46:13 back home :-) Oct 31 15:48:08 anything interesting/new here ? Oct 31 15:48:20 can you help me on a recipe ? it's for qwt, after mail exchange with Koen I try to improve it and fail to get one thing to work. qwt recipe products libqwte5 + libqwte-dev + libqwte-examples ipk. how can I get thses packages installed in recipes ? I always get Missing or unbuildable dependency chain was: ['libqwte-examples'] Oct 31 15:48:37 i can give it a try Oct 31 15:48:46 I cen send you the recipe by email Oct 31 15:48:51 if that helps Oct 31 15:49:30 yeah, or pastebin it Oct 31 15:50:03 i'd say if you refer to it in an RDEPENDS it is libqwte-examples Oct 31 15:50:10 it is in PACKAGES ? Oct 31 15:50:34 there is the thing: PN seems renamed from qwt to libqwt Oct 31 15:50:54 there is a "magic" layer which seems to do this for libraries ;) Oct 31 15:51:04 but I don't yet know where Oct 31 15:51:08 hm, ok, yes this is in one of the classes (debian or so I think) Oct 31 15:51:30 http://pastebin.com/bVQAnBJk Oct 31 15:52:18 i guess the name mangling is in debian.bbclass Oct 31 15:53:12 ok it's auto_libname there Oct 31 15:53:47 but then how to get these packages in images or tasks ? Oct 31 15:54:08 in the present case I need : libqwte & libqwte-examples in the image and libqwte-examples in the sdk task Oct 31 15:55:28 don't know exaclty, looking Oct 31 15:55:42 where the 2 days of mettings interesting ? Oct 31 15:56:00 were not where Oct 31 15:57:17 i think so, although sat afternoon we didn't do much as most people had to leave Oct 31 15:57:51 in openssl, I see they name the package libssl Oct 31 15:58:50 how do you feel about yocto ? Oct 31 15:59:03 I haven't really studied the thing Oct 31 15:59:45 seems like the intel answer to arm/ubuntu/linaro ;) Oct 31 15:59:58 on the political/communication point of view Oct 31 16:00:04 yeah, not sure what it will mean for oe Oct 31 16:00:25 how is your recipe called? qwt? or libqwt? Oct 31 16:00:30 qwt Oct 31 16:01:04 then I think the package you should refer to is also qwt-examples Oct 31 16:01:32 see webkit/arora as example Oct 31 16:01:34 ok which explains why libqwte is installed when I add qwt Oct 31 16:01:44 yes Oct 31 16:01:57 I understand, in the recipe, we use the real PBN not the one renamed by debian.bbclass Oct 31 16:04:18 guess so., I'm not too good in the lib naming stuff Oct 31 16:05:52 were there some discussions concerning yocto at the meetings ? Oct 31 16:06:28 yes and our relationship with yocto, there will be an email on this tomorrow Oct 31 16:06:32 adn the way OE / Yocto could work together Oct 31 16:06:33 ? Oct 31 16:06:35 ok Oct 31 16:07:03 yes, actually it is also up to the community Oct 31 16:19:36 re Oct 31 16:21:12 likewise: hi, was home at 14.30, was near the back of the plane so one of the first to get out Oct 31 16:21:53 14:30 for me too Oct 31 17:53:09 03Paul Menzel  07master * r7fbf049a41 10openembedded.git/recipes/accelges/accelges_svn.bb: Oct 31 17:53:09 accelges_svn: sort `DEPENDS` alphabetically Oct 31 17:53:09 Signed-off-by: Paul Menzel Oct 31 17:53:09 Signed-off-by: Martin Jansa Oct 31 17:53:20 03Paul Menzel  07master * r085ffb045a 10openembedded.git/recipes/accelges/accelges_svn.bb: (log message trimmed) Oct 31 17:53:20 accelges_svn: add `libglade` to `DEPENDS` Oct 31 17:53:20 The task `configure` failed with the following error. Oct 31 17:53:20 […] Oct 31 17:53:20 | checking for NOTIFY... yes Oct 31 18:42:34 Hi Oct 31 18:42:50 anybody can help-me with a error when compiling xextproto? Oct 31 18:43:14 http://pastebin.com/WPXsPzsj Oct 31 18:53:59 03Martin Jansa  07master * r54d1ab5873 10openembedded.git/recipes/xboard/ (files/no-strip.patch xboard_4.4.4.bb): Oct 31 18:53:59 xboard: add version 4.4.4 Oct 31 18:53:59 * move files to PN-PV for faster lookup Oct 31 18:53:59 Signed-off-by: Martin Jansa Oct 31 18:58:59 any help? Oct 31 19:35:48 please? Oct 31 19:36:00 re Oct 31 19:36:16 hi florian Oct 31 19:36:29 florian: I'm with a problem when compiling xextproto Oct 31 19:36:32 florian: http://pastebin.com/WPXsPzsj Oct 31 19:37:02 florian:Arch linux compiling for angstrom for a1200 machine(pxa27x) Oct 31 19:40:16 angelox_123: uh this one looks scary Oct 31 19:40:45 looks likes it tries to download some file while compiling Oct 31 19:45:12 that's strange Oct 31 19:45:45 Do you know any possible fix? Oct 31 19:45:52 i was needing compile some packages Oct 31 19:49:55 angelox_123: no idea, I haven't seen this one yet Oct 31 19:54:52 ok... do you have at you pc openembedded to test compile that package ? Oct 31 20:02:58 i'll give it a try Oct 31 20:10:13 angelox_123: can you download the file manually ? Oct 31 20:10:31 eFfeM:to what directory? Oct 31 20:12:36 to wherever you want to, to verify that the file is there and the link is ok Oct 31 20:12:55 yes the file and link ok Oct 31 20:13:40 that's a strange issue i think Oct 31 20:16:26 hmm, if I add BUILD_ARCH='amd64' to local.conf bitbake complains that it can't figure out the endianness of this build. same with x86-64 Oct 31 20:17:08 angelox_123: yes, maybe ask one of the angstrom guys Oct 31 20:17:11 I'm trying to build gmp-native (for overo-desktop-image) and google takes me to a thread where specifying the build explicitly was a given solution Oct 31 20:32:57 or I guess a better question is how do I tell git to pull in the gmp recipe from head if I'm checked out on the overo branch Oct 31 20:48:50 tzanger: git cherry-pick Oct 31 21:36:24 angelox_123, not a great solution, but you could try an different version via PREFERRED_VERSION_xextproto Oct 31 21:36:51 Thank you HopsNBarley,but at this time i'm trying another distro to tests Oct 31 21:36:55 THanks anyway Oct 31 21:37:06 np Oct 31 21:50:07 angelox_123: Works for me for an armv6 system - but i'm running an armv5te as wel. Oct 31 21:50:15 but this will take a while Oct 31 21:50:35 what arch you use on local.conf? only "armv6" ? Oct 31 21:51:56 that's a smartqv7 but it shouldn't matter Oct 31 21:52:15 ok thank you Oct 31 21:53:40 I am getting this trying to bitbake (on multiple machines) http://pastebin.ca/1977983 it fails but no idea why Oct 31 21:54:24 ynezz: thanks, I'll see if I can figure it out Oct 31 21:59:33 DaveDavenport: some people have found that upgrading to bitbake 1.10 fixes that problem. i forget if that's the official solution or not Oct 31 21:59:57 do you have all your bitbake-related environment variables set up (via something like ~/.oe/environment ?) Oct 31 22:03:21 yes Oct 31 22:03:25 I use the oebb.sh script Oct 31 22:03:30 worked splendid before Oct 31 22:04:06 DaveDavenport: hmm is it bitbake 1.8.xx Oct 31 22:04:20 and whats python version on your host machine Oct 31 22:04:23 yes, I will try to update tomorrow Oct 31 22:04:50 I think the co's run ubuntu 9.04.. I don't have direct access atm. Oct 31 22:04:57 1.10.x is ok to use its not yet default version Oct 31 22:05:00 will check tomorrow Oct 31 22:05:11 I will upgrade, that should be no problem Oct 31 22:05:14 DaveDavenport: k Oct 31 22:05:29 I guess we need to fix this issue in 1.8 Oct 31 22:05:39 anyway unless we abandon 1.8 Oct 31 22:06:03 which is a near possibility Oct 31 22:06:41 large incompatibilities betweenv ersions? **** ENDING LOGGING AT Mon Nov 01 02:59:57 2010