**** BEGIN LOGGING AT Thu Nov 25 02:59:58 2010 Nov 25 06:53:37 03Graham Gower  07master * ra1bba89847 10openembedded.git/recipes/ (8 files in 3 dirs): Nov 25 06:53:37 Remove use of ipkg{,-collateral,-link}. Nov 25 06:53:37 No one should be using these any longer. Nov 25 06:53:37 * Opkg conflicts with ipkg. Nov 25 06:53:37 * There is opkg, opkg-collateral and ipkg-utils contains ipkg-link. Nov 25 06:53:38 Signed-off-by: Graham Gower Nov 25 06:53:38 Signed-off-by: Khem Raj Nov 25 06:53:49 03Khem Raj  07master * rb86e4f9c87 10openembedded.git/recipes/qemu/qemu_0.13.0.bb: Nov 25 06:53:49 qemu_0.13.0.bb: Disable parallel make Nov 25 06:53:49 Signed-off-by: Khem Raj Nov 25 07:02:30 going to reboot the git/wiki server. Nov 25 07:04:44 khem, please check? Nov 25 07:10:18 ka6sox-away: seems to work Nov 25 07:10:33 thx Nov 25 07:10:35 khem, thanks. time for bed. Nov 25 07:10:39 gn Nov 25 07:25:32 hi Nov 25 07:26:11 micro + meta-toolchain -> gcc-cross-sdk failure : http://tinderbox.openembedded.net/public/logs/task/11139794.txt http://tinderbox.openembedded.net/public/logs/task/11142598.txt http://tinderbox.openembedded.net/public/logs/task/11145126.txt Nov 25 07:29:15 morning Nov 25 07:40:29 hi, i've bitbaked an x11-image, but when i start it up on my h2200, i get a white screen. I have ssh access to the box so it is running Nov 25 07:40:40 any hints to where i should start to look? Nov 25 07:47:23 here is my Xorg.0.log: http://pastebin.ca/2001744 Nov 25 08:31:48 gm Nov 25 08:32:21 hi eFfeM_work Nov 25 08:32:47 about to check how my test builds went Nov 25 08:33:47 eFfeM_work: here everything build fine except meta-toolchain for micro distro Nov 25 08:35:06 i did only my regular builds, but this weekend i wanted to try to build all images for sheevaplug/minimal without clean inbetween (otherwise it has to rebuild too many packages); starting with empty downloads and no local premirror Nov 25 08:36:42 good morning Nov 25 08:37:23 and want to test james-image for more targets Nov 25 08:37:24 hi mckoan Nov 25 08:45:13 eFfeM_work: I can build it for several arm targets Nov 25 08:45:48 maybe we get some snow tomorrow so the server must run at 200% to get the office warm :-D Nov 25 08:45:56 cool; actually I just bumped srcrev for mythtv as upstream already solved the qt4.7 problem Nov 25 08:47:00 ok once my micro finish, I launch micro-uclibc and then the james-image Nov 25 08:47:14 where does this name (james-image) comes from ? Nov 25 08:48:09 i had to find a nice name Nov 25 08:48:11 James (acronym for Just A Miniature Entertainment System) is an application providing a home entertainment solution Nov 25 08:48:17 :-D Nov 25 08:48:19 http://www.elinux.org/BeagleBoard/James Nov 25 08:49:14 it is my toy home server project but it seems most of the functionality is becoming more and more common Nov 25 08:49:53 this started off when a NAS was just a NAS but currenty they also do upnp, torrent client etc etc Nov 25 08:50:02 interesting Nov 25 08:50:41 btw still get multiple providers messages on bluez-libs Nov 25 08:51:45 i have the same white screen with xorg-image :-( Nov 25 08:53:07 eFfeM_work: we did one box in 2001 with a friend : http://pficheux.free.fr/omm/index.html I had a prototype running on an old PC motherboard with Linuxbios (Linux was booting from a flash repalcing the bios in about 1 second ;-) Nov 25 08:54:15 cool, i started this project in 2004 when I purchased my nslu2 Nov 25 08:54:20 I did the box with dremel & steel plates & glue ... this was not very polished but it was working for music & napster client Nov 25 08:55:03 interesting I'll try the image on a beagle Nov 25 08:55:59 before I have to polish a qt4-x11 image for khem :-D Nov 25 08:56:24 and even before I have some real work to do :-( Nov 25 08:57:06 03Eric Bénard  07org.openembedded.dev * re94e58ea4c 10openembedded.git/recipes/busybox/ (8 files in 2 dirs): Nov 25 08:57:06 busybox: add 1.18.0 and its first fix Nov 25 08:57:06 this is the latest unstable version so DP=-1 Nov 25 08:57:06 Signed-off-by: Eric Bénard Nov 25 08:57:06 Acked-by: Khem Raj Nov 25 08:57:07 you might have problems building for a beagle; last time I looked they used an arago 2.6.32 kernel, but that one had some 2.6.33 patches to it that change the kernel api causing a build failure in tgt, if you get that just remove tgt from the task (solution would be a patch on 2.6.32 but that was rejected by koen before I even submitted the patch) Nov 25 08:57:16 03Eric Bénard  07org.openembedded.dev * re55481c740 10openembedded.git/recipes/qt4/ (10 files in 2 dirs): Nov 25 08:57:16 qt4: add latest 4.7.1 version Nov 25 08:57:16 qt4-embedded, qt4-tools-native and qt4-tools-sdk are compile tested. Nov 25 08:57:16 qt4-x11-free and qt4-x11-free-gles are not tested. Nov 25 08:57:16 qt4-embedded is run tested on armv6 Nov 25 08:57:16 Signed-off-by: Eric Bénard Nov 25 08:57:17 Acked-by: Khem Raj Nov 25 08:57:18 03Eric Bénard  07org.openembedded.dev * r3a4d37e4cd 10openembedded.git/recipes/busybox/ (3 files in 2 dirs): Nov 25 08:57:18 busybox 1.17.3: add latest fixes Nov 25 08:57:18 from http://busybox.net/downloads/fixes-1.17.3/ : Nov 25 08:57:19 * ip route (fixed bug of misplaced argv++) Nov 25 08:57:19 * ls (-g was showing user instead of group) Nov 25 08:57:20 Signed-off-by: Eric Bénard Nov 25 08:57:20 Acked-by: Khem Raj Nov 25 08:57:21 03Eric Bénard  07org.openembedded.dev * r40273d2b8d 10openembedded.git/recipes/busybox/ (7 files in 2 dirs): Nov 25 08:57:37 busybox: add 1.17.4 (latest stable version) Nov 25 08:57:37 this is the latest stable version (1.17.3 + its fixes). Nov 25 08:57:37 Signed-off-by: Eric Bénard Nov 25 08:57:37 Acked-by: Khem Raj Nov 25 08:59:19 ericben: do you still see the problem with the multiple providers of depmod? Seems gone here Nov 25 09:01:57 ericben: can we drop D_P -1 from qt-4.7.1? Nov 25 09:02:13 ericben: I would drop preferred version for qt and busybox from SHR then Nov 25 09:04:26 ie default qt4-tools-native is 4.5.2 which is imho used/tested less then 4.6 or 4.7 series Nov 25 09:04:43 JaMa: yes I can drop it but would prefer someone to at least compile test x11-free-gles Nov 25 09:05:10 for the moment I pushing a patch to update busybox's preference in angstrom & sdh conf files Nov 25 09:05:23 then we will see for qt4 Nov 25 09:05:28 I'm building qt4-x11-free atm Nov 25 09:05:34 qt4 embedded 4.7.1 work fine on my armv6 board here Nov 25 09:05:36 cool Nov 25 09:06:08 I'll prepare a qt4-x11 demo image this evening I think Nov 25 09:06:40 ericben: please remove P_V for busybox in preferred-shr-versions (I will count on you with setting sane D_P for busybox and I have no special reason to pin particular version now) Nov 25 09:07:22 ok no problem. for busybox I think we can stick to the latest stable version of busybox.net as this is a serious project ;-) Nov 25 09:09:42 eFfeM_work: I think the 0.23-fixes branch should work with Qt-4.7* Nov 25 09:10:30 jannau: yeah, found it, i was at svn 25xxx and it got fixed later, now trying a build with 27202 which is the latest 0.23 fixes Nov 25 09:10:39 jannau: if that works I'll push it tonight Nov 25 09:11:25 jannau: did you make any changes to what you mailed on 0.24, didn't have time to peek at it yet (I'm somewhat overloaded), but hope to be able to look at it soon Nov 25 09:11:43 I never got around to test if the 0.24 recipe works without the inherit qmake2 Nov 25 09:12:07 since I have build problems Nov 25 09:13:18 ok, i'll see if I can get a stab at it Nov 25 09:29:52 grrr, i'm stuck with a booting device and a blank screen in xorg :-( Nov 25 09:30:21 seems to be a know problem but i can't find a solution for it on google :-( Nov 25 09:30:36 last messages about it were from 2007 Nov 25 09:37:13 buy a newer device than :) Nov 25 09:40:32 anyone tried Archos5 device? Nov 25 09:43:23 cazze: dont' you see anything on terminal? Nov 25 09:46:38 mickey|office: ping Nov 25 09:49:32 ant_work: i have ssh access Nov 25 09:49:47 but nothing on the screen: white blank :-( Nov 25 09:50:18 i've posted my Xorg.0.log above Nov 25 09:50:43 http://pastebin.ca/2001744 Nov 25 09:51:00 mckoan: yes Nov 25 09:51:26 and i see with ps that tscalibrate is running now, so i think if i could unblank the screen, i should see something :-) Nov 25 09:51:53 cazze: kill tscalibrate :) Nov 25 09:52:12 Jay7: did it already, but no change :-) Nov 25 09:52:29 I thought, that tscalibration is issue on newer kernels Nov 25 09:52:43 try to run xterm on that DISPLAY Nov 25 09:53:34 if i kill tscalibrate, i get the following in ps : gpe-login .... but i see nothing on the screen :-( Nov 25 09:54:25 cazze: you can try to use kdrive 1.3.0 instead of xorg Nov 25 09:54:34 but not sure will it help or not Nov 25 09:55:10 what image can i use to test it? or do i have to bake one myself? :-) Nov 25 09:55:38 some old angstrom-2007.1 should have kdrive imho Nov 25 09:56:11 those from narcissus worked Nov 25 09:56:11 cazze: you should set XSERVER var with kdrive somewhere (i.e. in machine conf) Nov 25 09:56:55 cazze: look at ben-nanonote.conf Nov 25 09:57:29 i have XSERVER ?= "xserver-kdrive-fbdev" in x11-image Nov 25 09:57:40 and x11-image gives me the same problem Nov 25 09:59:13 cazze: which kernel you have? Nov 25 09:59:35 standard hh kernel 2.6.21-r26 Nov 25 09:59:43 hm.. strange then Nov 25 10:00:01 btw, XSERVER ?= is weak Nov 25 10:00:10 may be overriden somewhere Nov 25 10:00:14 check bitbake -e Nov 25 10:00:30 or override it in your local.conf Nov 25 10:00:39 (again) :) Nov 25 10:01:47 ok Nov 25 10:02:52 i see in my h2200.conf PREFERRED_PROVIDER_xserver = "xserver-kdrive" Nov 25 10:02:59 should that be changed? Nov 25 10:06:45 if i put XSERVER = "xserver-kdrive-fbdev" under it, should it be enough? Nov 25 10:07:04 or do i have to remove the preferred server stuff also? Nov 25 10:07:06 dm8tbr: how it works? is a good product? Nov 25 10:07:49 mckoan: depends what your intentions are and which generation device you actually mean. Nov 25 10:10:02 dm8tbr: I need a MP3 player and a test platform for Android Nov 25 10:10:18 dm8tbr: but I'd like some OE hacking too ;-) Nov 25 10:10:33 dm8tbr: Nokia N900 is too expensive to me Nov 25 10:15:15 cazze: hm.. it should be ok then with PREFFERED_PROVIDER Nov 25 10:15:24 cazze: compare with akita Nov 25 10:15:31 ok Nov 25 10:15:35 it was stick to kdrive 1.3.0 Nov 25 10:17:44 ha, there is a xserver-kdrive-1300 Nov 25 10:17:49 need znc restart Nov 25 10:17:53 will return shortly Nov 25 10:19:35 mckoan: then you'd rather look at the A5IT or the A43 (or gen8 devices in general) Nov 25 10:20:07 for gen8 the SDE is still pending though, but should be out soon Nov 25 10:22:51 dm8tbr: yes I mean A5IT Nov 25 10:23:31 dm8tbr: looks amazing Nov 25 10:24:02 dm8tbr: the perfect cheap christmas gift :-D Nov 25 10:28:34 mckoan: well I'd go for an A43, but an A5IT might be a bit cheaper. (personally I'm waiting for my A101 to arrive) Nov 25 10:30:58 dm8tbr: is it easily hackable? Nov 25 10:32:24 shame, that the 10.1" is only 1024x768 Nov 25 10:32:25 ynezz: gen6 and gen7 have an firmware file you throw at them and then you can flash whatever zImage/initramfs you want and boot whatever rootfs you feel like Nov 25 10:32:38 sounds good Nov 25 10:32:42 for gen8 this is due out soon. ask av500 for details ;) Nov 25 10:33:08 we even have proof of concept MeeGo on the A5IT Nov 25 10:33:22 just that TI SGX seems to have a bug and font rendering is b0rken Nov 25 10:33:23 but it's like all devices are "comming soon" or "out of stock" :) Nov 25 10:34:06 ynezz: typical for archos. They don't have the financial resources to pre-finance a huge launch Nov 25 10:34:36 what about oe on n810, is it the same as N800 ? Nov 25 10:34:37 ah Nov 25 10:34:59 or should i stick to maemo on it? Nov 25 10:35:12 if you lend them some M€ then I'm sure they'd be happy to have a huge volume start ;) Nov 25 10:35:48 dm8tbr: yea, I could find the use for some M also :) Nov 25 10:35:56 see :) Nov 25 10:37:07 but from what I hear devices are coming in numbers now, so they might make it for the X-mas rush. Which would make their finances look finally better Nov 25 10:39:54 ok, I'll try to preorder than Nov 25 10:40:35 openpandora :) Nov 25 10:40:50 they are shipping even Nov 25 10:40:54 sometimes.. Nov 25 10:42:03 let's make our own communicator Nov 25 10:42:09 sure, with B&B Nov 25 10:43:27 dm8tbr: are 8GB enough to put Android on it? Nov 25 10:43:53 mckoan: um, yeah, sure, why wouldn't it? Nov 25 10:44:59 dm8tbr: just to be sure Nov 25 11:13:55 Jay7: yippee, i have a screen now! thx for the tip! Nov 25 11:14:09 cazze: np :) Nov 25 11:14:20 Jay7: next problem to solve is touch screen, but i think i will look more to the akita Nov 25 11:14:24 cazze: but you can debug what was wrong in your case :) Nov 25 11:14:26 :-) Nov 25 11:15:06 touchscreen calibration can be problem on kdrive.. Nov 25 11:15:54 arrghh Nov 25 11:15:57 mckoan: essentially it is just a matter of convenience. if you want to have many different filesystem images then you might run out of space for actual ogg or mp3 files ;) Nov 25 11:16:08 cazze: not sure, there was some issues Nov 25 11:16:13 may be solved already Nov 25 11:16:25 i'll keep you informed :-) Nov 25 11:16:28 better to ask ant_work :) Nov 25 11:25:01 cazze: Narcissus image is built with the same packages you built..unless you changed smthg Nov 25 11:25:41 about ts calibration, was ok with xserver-kdrive-imageon few days ago (x11-image) Nov 25 11:26:15 try an opie image too (without X) to exclude kernel driver issues Nov 25 11:51:21 ant_work: will do Nov 25 11:51:38 ant_work: i changed alot :-) Nov 25 11:51:57 ant i want e17 on my device Nov 25 12:36:24 03Martin Jansa  07master * r2bffdb5098 10openembedded.git/recipes/openmoko-3rdparty/ (minneo/setup.py.patch minneo_svn.bb): Nov 25 12:36:24 minneo: bump SRCREV, add edje-native depends Nov 25 12:36:24 Signed-off-by: Martin Jansa Nov 25 12:36:33 03Martin Jansa  07master * r425ade7f37 10openembedded.git/conf/distro/include/preferred-shr-versions.inc: Nov 25 12:36:33 SHR: upgrade preferred QT to 4.7.1 Nov 25 12:36:33 Signed-off-by: Martin Jansa Nov 25 12:36:35 03Martin Jansa  07master * rc505667e9d 10openembedded.git/recipes/openmoko-3rdparty/podboy_svn.bb: Nov 25 12:36:35 podboy: sync with Valery's recipe, add missing edje-native dependency Nov 25 12:36:35 Signed-off-by: Martin Jansa Nov 25 12:36:47 03Martin Jansa  07master * r5c9396ce56 10openembedded.git/recipes/openmoko-3rdparty/neomis_svn.bb: Nov 25 12:36:47 neomis: bump SRCREV, add edje-native depends Nov 25 12:36:47 Signed-off-by: Martin Jansa Nov 25 12:36:48 03Eric Bénard  07master * rd0241fbf16 10openembedded.git/conf/distro/include/preferred-shr-versions.inc: Nov 25 12:36:48 shr: remove busybox's prefered version Nov 25 12:36:48 and use the latest stable as a default. Nov 25 12:36:48 Signed-off-by: Eric Bénard Nov 25 12:36:48 Signed-off-by: Martin Jansa Nov 25 13:10:57 03Koen Kooi  07org.openembedded.dev * rc8c3aca9e3 10openembedded.git/recipes/gstreamer/ (gst-ffmpeg_0.10.11.bb gst-rtsp.inc): Nov 25 13:10:57 gst-ffmpeg : update to 0.10.11 Nov 25 13:10:57 Signed-off-by: Koen Kooi Nov 25 13:11:04 03Koen Kooi  07org.openembedded.dev * r77195e3240 10openembedded.git/recipes/openmax/libomxil-bellagio_0.9.2.1.bb: Nov 25 13:11:04 libomxil: update to 0.9.2.1 Nov 25 13:11:04 Signed-off-by: Koen Kooi Nov 25 13:11:18 03Koen Kooi  07org.openembedded.dev * r3823c49615 10openembedded.git/recipes/linux/ (3 files in 2 dirs): Nov 25 13:11:18 linux-omap-zoomsync 2.6.32: restore some options that got lost in the defconfig merge Nov 25 13:11:18 Signed-off-by: Koen Kooi Nov 25 13:11:20 03Koen Kooi  07org.openembedded.dev * r7b98d1b008 10openembedded.git/conf/distro/include/sane-srcrevs.inc: Nov 25 13:11:20 opkg*: bump SRCREV to 587 Nov 25 13:11:20 Signed-off-by: Koen Kooi Nov 25 13:11:22 03Koen Kooi  07org.openembedded.dev * r8d0a787782 10openembedded.git/recipes/ti/ti-xdctools_3.20.05.76.bb: Nov 25 13:11:22 ti-xdctools: add 3.20.05.76 Nov 25 13:11:22 Signed-off-by: Koen Kooi Nov 25 13:11:25 03Koen Kooi  07org.openembedded.dev * re1277dc2b4 10openembedded.git/conf/distro/include/angstrom-2010-preferred-versions.inc: Nov 25 13:11:25 Angstrom 2010: move to qt 4.7.1 Nov 25 13:11:25 Signed-off-by: Koen Kooi Nov 25 13:11:27 03Koen Kooi  07org.openembedded.dev * r271184dba0 10openembedded.git/recipes/ffmpeg/ (ffmpeg.inc ffmpeg_svn.bb): Nov 25 13:11:27 ffmpeg: bump SRCREV Nov 25 13:11:27 Signed-off-by: Koen Kooi Nov 25 13:32:44 I've done a a jffs2 fs but it seems that some empty directories of my rootfs are not present in the jffs2 image. Is that a normal behavior ? Nov 25 13:38:38 03Eric Bénard  07org.openembedded.dev * rbfa5a6944d 10openembedded.git/conf/distro/include/angstrom-2010-preferred-versions.inc: Nov 25 13:38:38 angstrom-2010: prefer busybox 1.17.4 Nov 25 13:38:38 Signed-off-by: Eric Bénard Nov 25 13:38:38 03Eric Bénard  07org.openembedded.dev * r04f33c11a2 10openembedded.git/recipes/busybox/ (12 files in 2 dirs): Nov 25 13:38:38 busybox: remove 1.17.3 Nov 25 13:38:38 as it's no more default for SHR Nov 25 13:38:39 Signed-off-by: Eric Bénard Nov 25 13:38:39 Acked-by: Frans Meulenbroeks Nov 25 13:38:40 Acked-by: Martin Jansa Nov 25 13:38:40 03Eric Bénard  07org.openembedded.dev * r2b3f8fe41b 10openembedded.git/recipes/busybox/busybox-static_1.17.3.bb: Nov 25 13:38:41 busybox-static: switch to 1.17.4 Nov 25 13:38:41 before removing busybox-1.17.3 Nov 25 13:38:42 Signed-off-by: Eric Bénard Nov 25 13:38:45 Acked-by: Frans Meulenbroeks Nov 25 13:38:45 Acked-by: Martin Jansa Nov 25 13:38:45 03Eric Bénard  07org.openembedded.dev * rd4eca10170 10openembedded.git/recipes/busybox/ (13 files in 2 dirs): Nov 25 13:38:46 busybox: remove 1.17.1 Nov 25 13:38:47 as it's no more default for Angstrom-2010 Nov 25 13:38:48 Signed-off-by: Eric Bénard Nov 25 13:38:49 Acked-by: Frans Meulenbroeks Nov 25 13:38:51 Acked-by: Martin Jansa Nov 25 13:47:04 03Koen Kooi  07org.openembedded.dev * r562f4f6a7f 10openembedded.git/recipes/ffmpeg/ (3 files): Nov 25 13:47:04 omapfbplay: bump SRCREV Nov 25 13:47:04 Signed-off-by: Koen Kooi Nov 25 13:49:03 Hi, are there any message queues in OE? Like zeromq or qpid (client) ? Nov 25 13:55:25 03Koen Kooi  07org.openembedded.dev * r54c2b1102e 10openembedded.git/conf/distro/include/angstrom-codec-engine-latest-preferred-versions.inc: Nov 25 13:55:26 angstrom-codec-engine-latest-preferred-versions: bump xdctools to 3.20.05.x Nov 25 13:55:26 This fixed the codec-engine issues with angstrom 2010.x Nov 25 13:55:26 Signed-off-by: Koen Kooi Nov 25 15:14:00 Having a bitbake faiure - it can't grab ipkg-utils as handhelds.org is apparently down. Nov 25 15:14:36 Is there an alternate source for those files? Nov 25 15:18:46 zdw, let me see if its in our sourcemirror Nov 25 15:20:39 zdw: do you mean ipkg-utils_anoncvs.handhelds.org__20050930.tar.gz Nov 25 15:21:10 03Roger Monk  07org.openembedded.dev * ra8421661f6 10openembedded.git/recipes/ti/ (4 files): (log message trimmed) Nov 25 15:21:10 ti-xdais: Add Latest Versions (6.26.01/7.00/7.10/7.20) Nov 25 15:21:10 * Add 6.26.01.03 Nov 25 15:21:10 * Add 7.00.00.27 Nov 25 15:21:10 * Add 7.10.00.06 Nov 25 15:21:11 * Add 7.20.00.07 Nov 25 15:21:11 Signed-off-by: Roger Monk Nov 25 15:21:19 03Roger Monk  07org.openembedded.dev * r8ae983fb6b 10openembedded.git/recipes/ti/ti-sysbios_6.31.00.18.bb: Nov 25 15:21:19 ti-sysbios: Add SYSBIOS v.6.31.00.18 Nov 25 15:21:19 * Add 6.31.00.18 Nov 25 15:21:19 Signed-off-by: Roger Monk Nov 25 15:21:20 Signed-off-by: Koen Kooi Nov 25 15:21:24 03Roger Monk  07org.openembedded.dev * rc84446aecb 10openembedded.git/recipes/ti/ (ti-dspbios_5.41.08.30.bb ti-dspbios_5.41.09.34.bb): Nov 25 15:21:24 ti-dspbios: Add Latest Versions (5.41.08/08) Nov 25 15:21:24 * Add 5.41.08.30 Nov 25 15:21:24 * Add 5.41.09.34 Nov 25 15:21:24 Signed-off-by: Roger Monk Nov 25 15:21:24 Signed-off-by: Koen Kooi Nov 25 15:21:40 The failure I'm seeing is on ipkg-utils-native_1.6+cvs20050404.bb Nov 25 15:22:40 zdw, pastebin the error Nov 25 15:24:32 failure message: http://pastebin.com/KfyCek9Y Nov 25 15:25:27 dm8tbr: MACHINE=archos5it time bitbake x11-image fails :-( Nov 25 15:26:19 zdw: I haven't got that version sorry Nov 25 15:27:48 zdw: imho you need ipkg-utils_anoncvs.handhelds.org__20050930.tar.gz Nov 25 15:27:52 Ah, thanks anyway. Nov 25 15:28:17 which IS on sources.openembedded.org Nov 25 15:28:19 zdw, that version in in our sourcemirror : sources.openembedded.org Nov 25 15:29:57 ka6sox, I'm somewhat of a noob wrt/oe, so how would I go about getting a copy from the sourcemirror? Nov 25 15:31:14 03Koen Kooi  07org.openembedded.dev * r4df861b82a 10openembedded.git/recipes/linux/ (linux-omap4/omap4430-panda/defconfig linux-omap4_2.6.35.3.bb): Nov 25 15:31:14 linux-omap4: sync with latest ubuntu git Nov 25 15:31:14 Signed-off-by: Koen Kooi Nov 25 15:31:34 you could wget the file from sources.openembedded.org Nov 25 15:31:42 to the downloads directory Nov 25 15:32:36 mckoan: I wasn't even aware that the archos patches for a5it had made it upstream... Nov 25 15:33:39 ah, got it! Thanks all! Nov 25 15:37:00 zdw, yw Nov 25 15:43:01 dm8tbr: was just FYI Nov 25 15:43:33 mckoan: if you want to have a look there is an overlay at openaos.org Nov 25 15:44:11 the gen7 specific part mostly concerns kernel, boot-menu and initramfs Nov 25 15:44:58 * khem yawns Nov 25 15:45:17 ericben: around ? Nov 25 15:45:32 ericben: you have my official ack for QT 4.7.1 patches Nov 25 15:45:58 ericben: and please cherry pick busybox and qt patches into release branch too Nov 25 15:46:07 ah chilli sunny morning Nov 25 15:46:14 dm8tbr: thx I didn't know openaos Nov 25 15:47:36 ka6sox-work: it would be nice if one could browse sources.openembedded.org Nov 25 15:47:37 mckoan: if you have the time we'd very much appreciate some help to push some of the things we did back into OE Nov 25 15:47:50 are those really needed for release branch (In other words: are there known issues with older versions in OE?), looks like this way you could maintain release branch forever.. Nov 25 15:50:37 JaMa: valid point but I wanted to keep software around Nov 25 15:50:46 some recipes are being deleted Nov 25 15:51:15 eFfeM_work: if you can browse then you can run wget on it and suck all bandwidth Nov 25 15:52:25 true, but now you need to really know the exact name to find something Nov 25 15:52:49 you can run wget even now whats the difference Nov 25 15:52:50 see the ipkg-utils question above Nov 25 15:53:05 also true Nov 25 15:53:05 khem: I'm ok with that.. just those older versions were more tested.. pity if issue with new version is found few days after tagging.. Nov 25 15:53:05 ipkg-utils should be replaced by opkg-utils 3 years ago Nov 25 15:53:20 iirc we did it in Poky Nov 25 15:53:29 yeah, but that is a different topic (although I'm not too keen on opkg either Nov 25 15:53:33 khem: hi, ok will do this evening Nov 25 15:55:55 eFfeM_work: commit change which will suck archive from source mirror instead of cvs? Nov 25 15:55:58 hmmm I see so wget -r with wildcard wont work Nov 25 15:56:01 cool Nov 25 15:56:15 hrw we could do that Nov 25 15:57:35 JaMa: hmm true Nov 25 15:58:40 heading home, later .... Nov 25 15:58:50 eFfeM_work: I ended trusting handhelds.org few years ago Nov 25 15:59:02 * ka6sox-away wonders what that will do to our bandwidth. Nov 25 15:59:05 yeah, we need to fix this Nov 25 15:59:07 http://marcin.juszkiewicz.com.pl/2007/06/01/goodbye-handheldsorg/ Nov 25 16:05:22 is org.openembedded.stable still regarded as the stable build? Nov 25 16:05:51 darkstar62: if you can wait a week or so we will have new release Nov 25 16:05:51 darkstar62: until a weeks time Nov 25 16:06:02 cool, good to know Nov 25 16:26:53 jo Nov 25 16:27:11 hm hm the cgroup stuff Nov 25 16:27:26 hot gossip! Nov 25 16:28:10 hi blindman Nov 25 16:28:21 gossiping? Nov 25 16:28:23 hm works good enough for our app Nov 25 16:28:28 is using it for few days and it's good, just my OE builds takes much longer :) Nov 25 16:28:30 even on jaunty Nov 25 16:28:54 jama the kernel-patch or alternative? Nov 25 16:28:55 what's the preferred way actually, the 200 line patch or fixing it in your bashrc? Nov 25 16:29:12 kernel patch Nov 25 16:29:15 I tested shell stuff Nov 25 16:29:24 2.6.37-rc3-00002-g97f7f88 Nov 25 16:29:53 hm its like nice but nicer Nov 25 16:29:55 what are the advantages of the kernel approach? Nov 25 16:30:19 I wonder why nobody played with it before Nov 25 16:30:21 or is there a good summary somewhere and i havent seen it? Nov 25 16:30:31 cgroups is long there Nov 25 16:30:49 woglinde: iirc i deactivated cgroups mostly in the kernel when i had to handtune my workstation kernel :) Nov 25 16:30:51 blindman some claims the alternative is faster Nov 25 16:31:01 BlindMan: don't know.. I have it just because it was known about a day before shell approach and I have it in my tree since then Nov 25 16:31:02 blindman why? Nov 25 16:31:26 woglinde: never bothered looking deeper into it what it actually does Nov 25 16:31:40 woglinde: or like if it's even useful for my 1 proc machine Nov 25 16:31:50 lol Nov 25 16:31:56 1 proc machine? Nov 25 16:32:02 buy a new one Nov 25 16:32:02 some old amd Nov 25 16:32:10 model name : AMD Athlon(tm) 64 Processor 3500+ Nov 25 16:32:17 phenome2 Nov 25 16:32:42 i would rather spend my money on an arduino or somesuch :) Nov 25 16:32:51 khem: before doing bad things, I have checked origin/release-2010.12 to a local release branch, I've cherry picked the patches, now I can simply do a git push release-2010.12 ? Nov 25 16:32:59 or pandaboard Nov 25 16:33:06 or is there something else to do ? Nov 25 16:34:54 03Marco Cavallini  07master * ra1275a1634 10openembedded.git/conf/distro/include/kaeilos.inc: kaeilos.inc: added ipv4 ipv6, thanks to Matteo Nov 25 16:39:08 khem: ok this did the trick: git push origin release:release-2010.12 Nov 25 16:43:12 how do I add a 'signed-off by' to a commit? Nov 25 16:43:23 -s Nov 25 16:43:42 copy-paste? Nov 25 16:44:42 woglinde: is it a simple part of the comment? Nov 25 16:44:57 mckoan: you can just type it with your keyboard, or "git commit -s" Nov 25 16:45:07 but there's no magic, it is just part of the checkin comment Nov 25 16:46:13 thx Nov 25 16:46:14 and if it's already commited : git commit --amend Nov 25 16:46:31 ericben: the problem is if is already pushed Nov 25 16:46:59 if it's already pushed : you can't do anything Nov 25 16:47:26 ericben: I know :-) maybe next time Nov 25 16:51:38 03Martin Jansa  07master * r92ff61c470 10openembedded.git/recipes/mplayer/ (4 files in 2 dirs): Nov 25 16:51:38 mplayer: bump SRCREV, remove mencoder, merge omapfb patches Nov 25 16:51:38 * mencoder was removed from git repo http://repo.or.cz/w/mplayer.git/commit/389c32b5c72897a8b1b3c929c8f278e8980f2290 Nov 25 16:51:38 if you need it, build from mplayer_svn.bb Nov 25 16:51:38 Signed-off-by: Martin Jansa Nov 25 16:52:43 ericben, pb_ : how do I add 'git format-patch' generated patches? using git apply? Nov 25 16:52:58 git am Nov 25 16:53:19 git am -s if you need it with Signed-off-by :) Nov 25 16:54:37 JaMa: thx Nov 25 17:07:02 have a nice rest of the day Nov 25 17:11:10 hi ph5 Nov 25 17:13:10 hi effem Nov 25 17:13:39 hej woglinde Nov 25 17:14:15 well.. build of meta-toolchains finished Nov 25 17:14:25 hi woglinde, all Nov 25 17:14:57 but w/o latest fixes it was useless :( Nov 25 17:29:15 ericben: what busybox version does angstrom 2008 use? Nov 25 17:33:56 Crofton|road: oops there may be a problem here Nov 25 17:34:06 just checking Nov 25 17:34:10 :) Nov 25 17:34:32 1.13.2 Nov 25 17:35:09 I did grep on the versions before removing but I could have missed that Nov 25 17:35:45 so no problem :) Nov 25 17:36:32 good Nov 25 17:36:43 just wanted to check, planty of people still build 2008 Nov 25 18:13:51 a Nov 25 18:23:19 pespin: ping Nov 25 18:24:11 pespin: GNUtoo|laptop: Why you don't sent the enjoy recipe for ML? Nov 25 18:25:10 fidencio, because I was busy travelling Nov 25 18:25:26 fidencio, I was asked by pespin to do it Nov 25 18:25:29 I'll try to do it Nov 25 18:25:38 where are the last versions of the recipes? Nov 25 18:25:51 GNUtoo|laptop, the last ones I know of are in your inbox ;) Nov 25 18:26:17 ok Nov 25 18:26:23 I'll look Nov 25 18:26:34 GNUtoo|laptop: pespin: as I sayd to pespin, the recipes looks ok and works for me. So, please, share this beautiful with the community :-) Nov 25 18:27:11 ok Nov 25 18:27:35 GNUtoo|laptop: pespin: And many thanks for the work :-) Nov 25 18:28:09 fidencio, yw, thanks to everyone who helped on writting that software. We needed it :D Nov 25 18:40:33 fidencio, I need your help for some infos Nov 25 18:40:44 * fidencio hides Nov 25 18:40:49 fidencio, enjoy is LGPLv3 Nov 25 18:40:53 right Nov 25 18:40:57 that's what COPYING says Nov 25 18:41:00 GNUtoo|laptop: let me see Nov 25 18:41:05 Yeap Nov 25 18:41:09 ok Nov 25 18:41:13 but what's the version? Nov 25 18:42:18 GNUtoo|laptop: I think that isn's there a version.You can use 0.1 Nov 25 18:42:38 so 0.0? Nov 25 18:42:50 use 0.0.$SVN_REV if possible Nov 25 18:43:02 ok that's already done Nov 25 18:43:33 acidx: helloooooo Nov 25 18:43:41 jannau: got this with 0.23+fixes: | /home/frans/oe/tmp_minimal/work/armv5te-oe-linux-gnueabi/mythtv-0.23-svnr27202+r0/mythtv/programs/mythtranscode/transcode.cpp:282: undefined reference to `RecordingProfile::~RecordingProfile Nov 25 18:44:09 GNUtoo|laptop: if you have any doubt, just ask for the enjoy's father -> acidx Nov 25 18:44:34 ok Nov 25 18:44:42 then there is lightmediascanner Nov 25 18:44:53 license is LGPLv2.1 Nov 25 18:45:13 and version is 0.4.1 Nov 25 18:45:16 so that's fine there Nov 25 18:45:58 ahh wait a sec Nov 25 18:46:21 is it LGPLv2+ or LGPLv2? Nov 25 18:46:49 acidx: ^ Nov 25 18:47:07 same for LGPLv3 (LGPLv3 or LGPLv3+) Nov 25 18:48:42 enjoy is LGPLv3 (there is no "LGPL v3 (or, at your option, any later version)" clause AFAIK) Nov 25 18:49:07 Hi, I have built console-image for mini2440. I have got u-boot flashed and have a kernel that loads until it trys to mount root fs. My boot args are wrong in u-boot and I cannot saveenv. Which channel is appropriate for this ? Nov 25 18:50:04 lightmediascanner seems to have the "at your option" in most of its files, so it is LGPLv2+ Nov 25 18:50:59 eFfeM: strange Nov 25 18:51:24 acidx, ok Nov 25 18:54:04 jannau: yeah, libmythtv is there Nov 25 18:55:32 eFfeM: please paste some context from the log Nov 25 18:57:25 jannau: http://pastebin.ca/2002201 Nov 25 18:58:50 jannau: not sure how the function name is in the lib after name mangling Nov 25 18:59:25 but there are quite some fucntions with RecordingProfile in the name Nov 25 18:59:26 nm libmythtv-0.23.1.so | grep RecordingProfile | wc Nov 25 18:59:26 190 570 10433 Nov 25 19:00:37 * GNUtoo|laptop builds and then will write the commit messages Nov 25 19:01:16 GNUtoo|laptop: cool :-) Nov 25 19:01:54 I must check the recipes too but they seem ok at first sight now Nov 25 19:02:33 is the order of the packages in IMAGE_INSTALL important? Nov 25 19:02:52 not as far as I know Nov 25 19:02:59 ok Nov 25 19:03:24 eFfeM: destructor is iirc .*RecordingProfileD[0-2].* Nov 25 19:12:35 lightmediascanner seem ok Nov 25 19:12:53 but what about that in enjoy_svn: Nov 25 19:12:54 PV = "0.0+svnr${SRCPV}" Nov 25 19:12:54 SRCREV = "${EFL_SRCREV}" Nov 25 19:13:24 * Jay7 is looking for some python language help Nov 25 19:13:32 jannau: I have ZTVN16RecordingProfile2IDE Nov 25 19:14:02 and _ZThn8_N16RecordingProfileD0Ev and _ZThn8_N16RecordingProfileD1Ev Nov 25 19:14:48 func needed is _ZN16RecordingProfileD1Ev Nov 25 19:15:47 actually it is in the lib 0000016c T _ZN16RecordingProfileD1Ev Nov 25 19:16:21 rebuilding and afk for a while Nov 25 19:16:23 GNUtoo|laptop: I think that's exactly what acidx said Nov 25 19:16:35 * GNUtoo|laptop will reread Nov 25 19:16:49 * jannau remembers seeing something similar but can not remember how it was solved Nov 25 19:16:57 ahhh Nov 25 19:16:59 use 0.0.$SVN_REV if possible Nov 25 19:17:11 I tought the important point was 0.0 Nov 25 19:17:20 so I didn't pay attention to SVN_REV Nov 25 19:18:39 btw, do we have some image with gcc/gdb inside? Nov 25 19:18:47 to develop on target Nov 25 19:22:05 fidencio, we also need flac Nov 25 19:22:16 pespin, ^^^ Nov 25 19:22:57 GNUtoo|laptop: flac? Nov 25 19:23:06 free losless audio codec Nov 25 19:23:11 acidx: ^ahhh Nov 25 19:23:16 lightmediascanner support thata Nov 25 19:23:20 GNUtoo|laptop: ahhh Nov 25 19:23:26 and so enjoy Nov 25 19:24:13 but what should I put exactly? is srcpv ok? Nov 25 19:24:17 in the PR Nov 25 19:24:22 JaMa|Off, hi Nov 25 19:24:36 oops Nov 25 19:24:37 I meant Nov 25 19:24:47 about the SRCREV line Nov 25 19:24:52 I'll grep for srcpv examples Nov 25 19:25:23 that sounds ok Nov 25 19:25:29 SRCREV = Nov 25 19:25:36 and PV = 0.0+${SRCPV Nov 25 19:26:13 0.0.+${... Nov 25 19:26:20 GNUtoo|laptop: ^ Nov 25 19:26:40 ok Nov 25 19:27:44 * GNUtoo|laptop doesn't understand very well Nov 25 19:27:59 I know what SRCPV is Nov 25 19:29:18 roughly Nov 25 19:31:48 GNUtoo|laptop, uhm no idea which gstreamer plugin gives support. i didn't have any flac file to try. Anyway, I think we should commit it without flac support and I'll try to add it when I have more time if you wish Nov 25 19:33:38 * GNUtoo|laptop will reread the manual Nov 25 19:33:41 GNUtoo|laptop: IIRC SRCPV was never a problem for svn Nov 25 19:34:00 no mention of srcpv Nov 25 19:34:08 mrmoku, I know Nov 25 19:34:24 but I don't know how to use it Nov 25 19:34:32 svn is sortable Nov 25 19:34:35 so it works Nov 25 19:34:41 you can tell if a version is more recent Nov 25 19:34:44 recipes/calibrator/calibrator_svn.bb:PV = "0.9e+svnr${SRCPV}" Nov 25 19:34:52 not on PV side Nov 25 19:34:56 but on setting the rev Nov 25 19:35:03 ahh Nov 25 19:35:05 yes Nov 25 19:35:16 I would think just set SRCREV in the recipe Nov 25 19:35:17 because some recipes do: Nov 25 19:35:20 SRCREV= Nov 25 19:35:29 PV = ${SRCPV} Nov 25 19:35:33 and that's confusing me Nov 25 19:35:37 ok Nov 25 19:35:40 recipes/cdparanoia/cdparanoia_svn.bb:SRCREV = "16684" Nov 25 19:35:45 yes I saw that Nov 25 19:35:49 but it was still confusing Nov 25 19:36:01 because I wonder where SRCPV was set Nov 25 19:36:05 maybe Nov 25 19:36:09 SRCREV is set Nov 25 19:36:14 GNUtoo|laptop, I suppouse gst-plugin-flac is tha package you are looking for, but I'm not sure. As said, would commit what we have and add flac support (and others) later Nov 25 19:36:29 conf/bitbake.conf:SRCPV = "${@bb.fetch.get_srcrev(d)}" Nov 25 19:36:29 then some magic occur to set srcpv from SRCREV going to remote-list the revision Nov 25 19:36:32 ok Nov 25 19:36:53 pespin, could you try to opkg install the correct stuff Nov 25 19:36:59 and so we commit everything at once Nov 25 19:37:05 mrmoku, thanks a lot Nov 25 19:37:37 GNUtoo|laptop, uhm I think I have *one* flac file in my computer Nov 25 19:37:50 ok nice Nov 25 19:37:56 let me try installing the flac plugin I said and trying to play it with enjoy Nov 25 19:38:01 nice Nov 25 19:38:03 bbvs Nov 25 19:40:01 back Nov 25 19:45:42 GNUtoo|laptop, uhm test-lms | grep flac does show nothing... Nov 25 19:45:55 GNUtoo|laptop: yw Nov 25 19:46:08 * GNUtoo|laptop will try flac then Nov 25 19:46:32 are you sure it supports flac? Nov 25 19:46:33 -p flac Nov 25 19:47:00 ERROR: could not dlopen() /usr/lib/lightmediascanner/plugins/flac.so: cannot open shared object file: No such file or directory Nov 25 19:47:10 ah? Nov 25 19:47:25 hmmm I will check Nov 25 19:47:33 let me connect the n900 to my laptop Nov 25 19:47:36 the lightmediascanner I have built in my FR doesn't have flac support Nov 25 19:48:03 ok Nov 25 19:48:05 I thought the problem was that enjoy didn't know to play it, but it seems there's no flac support in lightmediascanner here. Nov 25 19:48:13 maybe something needed at lightmediascanner build time? Nov 25 19:48:48 hmm flac is autodetected by autotools maybe Nov 25 19:49:10 #define HAVE_FLAC 1 Nov 25 19:49:13 I have flac plugin in Desktop PC Nov 25 19:49:23 but not in FR Nov 25 19:49:29 ok Nov 25 19:49:37 then it's autodected Nov 25 19:49:44 so we must depend on flac Nov 25 19:50:20 hint Nov 25 19:50:23 go in workdir Nov 25 19:50:28 and do ./configure --help Nov 25 19:50:31 with lightmediascanner Nov 25 19:50:55 I'm building something with OE right now, hope it dosn't hurt hehe Nov 25 19:51:27 do I need to . ./setup-env before? Nov 25 19:51:37 ah ok, only configure --help Nov 25 19:51:49 I thought you wanted me to actually run all the configure Nov 25 19:53:59 --disable-flac disable optional module flac. Default is Nov 25 19:53:59 enabled. Nov 25 19:54:13 no Nov 25 19:54:17 only the --help Nov 25 19:54:26 uhmm I don't remember disabling it... and it's enabled by default o.O Nov 25 19:54:40 it could be autodetected Nov 25 19:54:44 that is to say Nov 25 19:54:48 probably Nov 25 19:54:48 if it's there it's enabled Nov 25 19:54:54 and if it's not it's disabled Nov 25 19:55:01 by it's there I mean the dep Nov 25 19:55:22 hi valhalla Nov 25 19:56:07 GNUtoo|laptop, ok, now we need to know exactly which package hehe. Probably libflac8 ? Nov 25 19:56:31 just DEPENDS Nov 25 19:56:37 no need to know the package Nov 25 19:56:43 we just need to know which recipe Nov 25 19:56:45 right? Nov 25 19:57:04 unless lightmediascanner is in an interpreted language Nov 25 19:57:09 s/is/is written/ Nov 25 19:58:04 flac_1.2.1.bb ? Nov 25 19:59:04 recipes/flac/flac_1.2.1.bb Nov 25 19:59:36 can't try it now sorry, building other stuff to see if a little patch on ef-desktop-icon works Nov 25 19:59:57 ok Nov 25 20:00:02 and as I pulled from git, there's lots of things to be rebuilt Nov 25 20:00:06 ok Nov 25 20:00:13 I'm building too Nov 25 20:00:21 shr-image + enjoy Nov 25 20:01:46 -I/home/gnutoo/embedded/oe/oetmps/nokia900/sysroots/armv7a-oe-linux-gnueabi/usr/include/FLAC Nov 25 20:01:56 -lFLAC -lm Nov 25 20:02:03 FLAC_VERSION='1.2.1' Nov 25 20:02:13 and in flac workdir: Nov 25 20:02:50 work/armv7a-oe-linux-gnueabi/flac-1.2.1-r1/image/usr/include/FLAC Nov 25 20:03:03 so it sounds right Nov 25 20:05:45 so I add flac to lightmediascanner Nov 25 20:06:50 but my concern is about: Nov 25 20:07:01 *the gst-plugins for flac for enjoy Nov 25 20:07:10 *all the format that we should or should not support Nov 25 20:07:12 for instance Nov 25 20:07:19 there is rm, asf etc... Nov 25 20:07:27 I bet we disable theses unused formats? Nov 25 20:14:02 don't even know which formats are those hehe Nov 25 20:14:38 have to go, I think I won't return early. Hope you get thinks right :) Nov 25 20:18:18 rm -> realmedia Nov 25 20:18:22 not very usefull Nov 25 20:18:29 asf -> some streaming microsoft format Nov 25 20:19:10 so we should keep: Nov 25 20:19:12 id3 Nov 25 20:19:13 ogg Nov 25 20:19:14 flac Nov 25 20:19:16 jpeg Nov 25 20:19:18 png Nov 25 20:24:51 GNUtoo|laptop, enough for me :) bye! Nov 25 20:29:55 03Roger Monk  07org.openembedded.dev * rf3d49742fc 10openembedded.git/ (132 files in 5 dirs): (log message trimmed) Nov 25 20:29:55 linux-omap-psp: Update to latest omap3 2.6.32 psp kernel commit + remove committed pending local patches Nov 25 20:29:55 * Update to latest commit for kernel Nov 25 20:29:55 * Remove pending patches which are now commmited to kernel git tree Nov 25 20:29:55 * Switch to proper URI (alias) for omap3 kernel (instead of personal tree) Nov 25 20:29:56 * Switch to http protocol Nov 25 20:29:57 * Bump PR Nov 25 21:37:36 khem: ping Nov 25 22:32:18 evening Nov 25 22:32:45 which agent is used to pair bluetooth? Nov 25 22:32:59 i can't see simple-agent from the bluez4 package Nov 25 22:41:17 03Graham Gower  07master * rf97aeb1d04 10openembedded.git/recipes/tasks/task-fso-toolchain-target.bb: Nov 25 22:41:17 task-fso-toolchain-target.bb: Fix meta-toolchain-fso. Nov 25 22:41:17 Previously, do_populate_sdk failed due to missing c++ dir. Nov 25 22:41:17 mv: cannot stat `/var/tmp/tb-clean-build/work/mipsel-oe-linux/meta-toolchain-fso-1.0-r1/sdk/image//usr/local/minimal/mipsel/mipsel-oe-linux/usr/include/c++': No such file or directory Nov 25 22:41:17 Signed-off-by: Graham Gower Nov 25 22:41:17 Signed-off-by: Khem Raj Nov 25 22:52:13 blindvt``: are you around? Nov 25 22:57:52 03Khem Raj  07master * r3ad1829daa 10openembedded.git/recipes/gcc/ (15 files): Nov 25 22:57:52 gcc-configure-sdk: Handle hardcoded /usr/include Nov 25 22:57:52 This does not work for distros like micro who use Nov 25 22:57:52 a flattened tree structure for root file system Nov 25 22:57:52 Signed-off-by: Khem Raj Nov 25 22:58:48 khem: reping ? Nov 25 22:59:13 ant__: what do u mean Nov 25 22:59:19 * ant__ thinks our USA friends are eating too much turkey... Nov 25 22:59:30 ;P Nov 25 22:59:37 hi khem Nov 25 22:59:52 http://patchwork.openembedded.org/patch/2069/ Nov 25 23:00:07 I need this, otherwise: Nov 25 23:00:18 | ../lib/libcom_err.so: undefined reference to `__tls_get_addr' Nov 25 23:00:18 | collect2: ld returned 1 exit status Nov 25 23:00:18 | make[2]: *** [e2fsck] Error 1 Nov 25 23:00:32 (e2fsprogs) Nov 25 23:01:04 this is with angstrom-2008 Nov 25 23:01:37 uclibc 0.9.30.3 Nov 25 23:08:22 ant__: I dont know if we should get it into release Nov 25 23:09:27 should I try uclibc_git ? Nov 25 23:10:01 I cant see offhand when tls has been merged Nov 25 23:10:53 yes plz Nov 25 23:11:12 ant__: well with uclibc tls is only available for NPTL Nov 25 23:11:40 I'm a bit lost with uclibc versioning... Nov 25 23:12:14 iirc we are waiting for 0.9.32, isn't? Nov 25 23:13:05 it looks like nptl was merged 7 months ago Nov 25 23:20:56 ant__: yes .32 will have it all Nov 25 23:22:12 hi khem Nov 25 23:22:22 now trying bitbake qt4-x11-demo-image :-D Nov 25 23:22:25 ericben: hello Nov 25 23:22:34 ericben: cool man Nov 25 23:22:38 thx, rebuilding old angstrom with uclibc_git Nov 25 23:22:39 have you committed Nov 25 23:22:50 long time since I didn't use X so I'm working on it Nov 25 23:22:58 ericben: btw. I fixed the gcc-cross-sdk for micro Nov 25 23:23:04 try and see if it work Nov 25 23:23:23 yes I've seen this, I'll launch a new build once my uclibc build for micro& minimal finish Nov 25 23:23:31 ericben: cool Nov 25 23:31:30 he, now that we have to build perl, it exhibits legacy-staging :D Nov 25 23:31:51 who'll dare to touch that nest of wasps? Nov 25 23:31:55 its tough to get rid of that for perl Nov 26 00:09:53 boo Nov 26 00:10:24 * grg jumps Nov 26 00:10:39 * Jay7 finished some php'ing and have time for OE Nov 26 00:16:01 anyone experience with bluetooth networking here? Nov 26 00:16:13 i get connection refused with pand --connect Nov 26 00:17:55 I'm using only dun Nov 26 00:19:00 i"m searching for a pin-agent under oe :-) Nov 26 00:19:09 console based :-) Nov 26 00:20:08 check for bluez-simple-agent Nov 26 00:20:30 isn't that python based? Nov 26 00:20:35 oh..this is python Nov 26 00:20:36 yes Nov 26 00:21:12 03Khem Raj  07master * r3f71e24733 10openembedded.git/recipes/binutils/ (binutils-git/fix-clone-conflicts.patch binutils_git.bb): Nov 26 00:21:12 binutils_git.bb: Fix building target binutils build for SH4/uclibc Nov 26 00:21:12 Signed-off-by: Khem Raj Nov 26 00:21:48 cazze: have bluez4 no fallback to use pin from config file? Nov 26 00:22:13 don't know :-( Nov 26 00:25:21 khem: any suggestion about | libpthread/nptl/sysdeps/unix/sysv/linux/read.S:8: Error: unknown pseudo-op: `.cfi_sections' Nov 26 00:25:21 | make: *** [libpthread/nptl/sysdeps/unix/sysv/linux/read.oS] Error 1 ? Nov 26 00:25:28 khem, i'm trying to figure out why calls to exit() result in SIGABRT under mipsel/micro-uclibc. I've traced it to the .fini in libgcc.so but I have no idea where the code for this is in gcc sources. Any clues? Nov 26 00:27:18 that should read libgcc_s.so.1 to be more precise... gcc 4.5 Nov 26 01:11:01 well.. another meta-toolchains building iteration started Nov 26 01:11:30 * Jay7 -> sleep Nov 26 02:43:16 hmm suddenly my micro-uclibc exit()/SIGABRT problem is gone Nov 26 02:43:36 some commit fixed it in the last 24hrs **** ENDING LOGGING AT Fri Nov 26 02:59:58 2010