**** BEGIN LOGGING AT Thu May 19 02:59:58 2011 May 19 04:15:02 moin May 19 04:23:37 03Martin Jansa  07master * r4340f07345 10openembedded.git/conf/distro/include/sane-toolchain-java.inc: May 19 04:23:37 sane-toolchain-java: define PREFERRED_PROVIDER_openjdk-6-jre to use openjdk-6 as java2-runtime provider instead of cacao May 19 04:23:37 Signed-off-by: Martin Jansa May 19 06:37:37 HI May 19 06:37:48 Any one used plymouth with OE May 19 06:37:49 ?? May 19 06:42:07 hi all, i tried to compile console-image so many times and worked fine now suddenly with console-image only i m getting following error: http://pastebin.com/2A2c7Fai May 19 06:42:36 in every image which builds rootfs m getting this error May 19 06:42:49 any solution? May 19 06:54:06 aarti: check what depends on sysvinit-pidof in tmp/deploy/ipk Package files and rebuild that May 19 06:56:07 aarti: or rebuild sysvinit and check why sysvinit-pidof ipk is not created May 19 06:59:39 hi all May 19 07:04:34 JaMa, I tried to compile sysvinit and it's compiling very fine it is not giving me any error May 19 07:05:34 HI eFfeM_work May 19 07:05:47 hi Noor, how are you doing ? May 19 07:06:42 eFfeM_work: I am fine ... what about ? May 19 07:07:05 busy here May 19 07:07:32 good May 19 07:24:40 aarti: yes, but you have to check if it builds the files which are later packaged to sysvinit-pidof, if it's not then it's empty and not created.. FILES_sysvinit-pidof = "${base_bindir}/pidof.sysvinit" May 19 07:25:10 JaMa, i saw tht sysvinit-pidof is created May 19 07:35:39 aarti: so it's in tmp/deploy/arch/sysvinit-pidof*ipk? May 19 07:37:11 JaMa, sorry it's sysvinit-inittab***.ipk May 19 07:37:19 not pidof.ipk May 19 07:37:54 then you can check ie config.log to see why pidof wasn't built for you May 19 07:38:05 ok May 19 07:38:57 and when you're in WORKDIR check image dir, maybe it's there only not renamed to pidof.sysvinit (from do_install) May 19 07:40:33 JaMa, ya it's thr in WORKDIR/sysvinit/image/bin May 19 07:41:41 and the name is pidof.sysvinit only May 19 07:42:16 aarti: try "find WORKDIR/packages-split/sysvinit-pidof" May 19 07:43:22 Jama, in package-split also it is thr May 19 07:49:33 hi all May 19 07:49:41 bitbake -c fetch meta-toolchain comman is not working May 19 07:50:05 how can I download all sources required for meta-toolchain without build ? May 19 07:51:00 i have slow machine with unlimited access to the inet -> i want to download all required packages here, then make tarball and put everything to faster one May 19 07:51:05 is that possible ? May 19 07:54:14 03Koen Kooi  07org.openembedded.dev * r86c973725d 10openembedded.git/recipes/angstrom/bigbuckbunny-720p.bb: May 19 07:54:14 bigbuckbunny: fix SRC_URI May 19 07:54:14 Signed-off-by: Koen Kooi May 19 07:56:30 aarti: then I dont know what could go wrong between package-split and .ipk creation, double check it's not in tmp/deploy/ipk and build with -DD to set package_write_ipk task May 19 07:56:45 aarti: s/to set/to see/ May 19 07:57:18 ok May 19 08:27:58 anybody can let me know that when my patch of ust and userspace-rcu for new recipe will be merged May 19 08:35:22 good morning May 19 08:35:27 http://free-electrons.com/pub/video/2011/elc/elc-2011-raj-openembedded-toolchain-sdk-x450p.webm May 19 08:35:36 hi khem ;) May 19 08:35:49 hi ericben May 19 08:35:53 hi ericben May 19 08:35:56 hi florian woglinde May 19 08:54:35 Noor: done now May 19 08:54:37 03Noor Ahsan  07master * rf388a5f3a1 10openembedded.git/recipes/lttng/ust_0.12.bb: May 19 08:54:37 ust: Add new recipe for 0.12 version May 19 08:54:37 * Add new recipe of ust for 0.12 version May 19 08:55:19 hm more people from mentor? May 19 08:55:44 good May 19 08:56:56 03Eric BENARD  07master * r676c4e3225 10openembedded.git/recipes/busybox/busybox_1.18.4.bb: May 19 08:56:57 busybox-1.18.4: add latest fix May 19 08:56:57 hush: fix misparsing of "... do eval a= ...". Closes 3721 May 19 08:58:17 ericben: thanks for the link. May 19 08:58:36 gm zecke May 19 09:51:51 ericben: thanks very much May 19 10:07:45 Hrm... why would a bb change TARGET_ARCH? May 19 10:09:22 anyone here can help ? how can I download all sources required for meta-toolchain without build ? May 19 10:10:37 CruX|: bitbake meta-tooclhain -c fetchall May 19 10:10:58 florian: sounds broken... May 19 10:11:20 bluelightning: sounds extremely broken May 19 10:11:32 florian: which recipe is it ? May 19 10:15:40 ericben: espeak-data May 19 10:16:05 uhm lol May 19 10:30:16 hrm... this is broken in multiple ways May 19 10:39:32 I have one issue in RDESKTOP, at first attempt it gives me segmentation fault with right username and password.... .... but if i enter wrong username/password and then the right one... its get connected..... why is it so.....? May 19 10:39:48 I had compiled a rdesktop for MIPS May 19 10:52:07 sanket: sounds like a bug in rdesktop to me May 19 10:52:26 sanket: does it only behave that way on MIPS? May 19 10:52:48 if it's a more general issue you might try running it through valgrind May 19 10:54:20 woglinde: yeah working on oe for quite some time but not that regular in sending patches May 19 10:58:41 bluelightning, yes.... May 19 10:59:10 sanket: hmm, well in that case you may have to track the issue down with gdb May 19 10:59:11 valgrind ? I hv no idea... can you help me.. May 19 10:59:53 valgrind doesn't support mips AFAIK May 19 11:00:09 valgrind helps find memory errors which are usually the cause of segfaults May 19 11:01:14 sanket: I'm not sure I have time to go digging into an rdesktop bug May 19 11:01:28 speaking of mips. anyone got a list of cflags, ldflags for that arch? May 19 11:01:48 sanket: you might try google search on debugging with gdb (assuming you haven't done that before) if you want to investigate this further May 19 11:11:58 sanket: it is still the same issue you had one week ago? May 19 11:12:17 bluelightning, also I m using Uclibc ..... May 19 11:13:34 zecke, yes... since i m busy with other work..... once again i m solving that issue.... May 19 11:15:16 sanket: no, you are not solving it, you ask people to solve it. May 19 11:15:54 sanket: to be frank, I assume you get paid for doing this. You should be capable of reading the GDB manual. May 19 11:16:47 zecke, I asking does anyone having such type of issues..... I m capable enough to solve that..... May 19 11:17:00 sanket: well, then solve it and send a patch. May 19 11:17:25 zecke, ok.... it vll be a challenge for me.... May 19 11:19:31 sanket: gdb rdesktop May 19 11:19:35 sanket: r May 19 11:19:36 sanket: bt May 19 11:19:39 not that difficult. May 19 11:20:38 zecke, I knw dat.... problem is with the memory..... if I reduce the resolution of rdp ... its get connected without any error.... May 19 11:22:25 zecke, for that now I m using NFS booting... I knw it vll not that much effect... but still May 19 11:22:35 sanket: sorry, I stopped giving free support to non community members a long time ago. May 19 11:22:51 sanket: well, you say segfault.. GDB will catch a segfault for you and you can see _where_ it crashes. May 19 11:23:32 zecke, ok.... May 19 12:07:49 pb_, ping May 19 12:16:26 03Simon Busch  07master * rb232bbb941 10openembedded.git/recipes/aurora/aurora-version.bb: May 19 12:16:26 aurora-version: add initial recipe as copy of shr-version May 19 12:16:26 Signed-off-by: Simon Busch May 19 12:16:31 Aurora is a distribution suited for mobile targets platforms powered by the FSO May 19 12:16:32 middleware. This are mostly mobile handset like the Palm Pre devices. Aurora as May 19 12:16:32 distribution is based on minimal and only adjusts some things in another way than May 19 12:16:34 minimal. May 19 12:16:34 Signed-off-by: Simon Busch May 19 12:17:33 aurora-image: remove and add some packages from/to IMAGE_INSTALL May 19 12:17:33 Signed-off-by: Simon Busch May 19 12:17:33 03Simon Busch  07master * rb6b191364e 10openembedded.git/recipes/freesmartphone/ (aurora/aurora-daemon aurora_git.bb): May 19 13:23:37 03Martin Jansa  07master * rd768394be9 10openembedded.git/recipes/xorg-xserver/ (2 files in 2 dirs): May 19 13:23:37 xserver-xorg-1.10.1.901: return randr-support patch May 19 13:23:37 * Thanks to Benjamin Deering for updating patch May 19 14:36:03 pb_, github seems to confuse you and me May 19 15:01:42 Crofton: in what way? May 19 15:02:44 not sure, on my dashbaord, all I see is commits from you May 19 15:02:53 maybe just the way it orks or some weird reason May 19 15:03:45 maybe I am confused May 19 15:04:33 are you watching any of my repositories? May 19 15:04:46 no May 19 15:04:48 I checked that May 19 15:05:19 oh, wait, I see what's happened May 19 15:05:27 ok May 19 15:05:33 all the activity in the github mirrors is showing up as pushed by me May 19 15:05:39 I'm not oppsoed to watching yours :) May 19 15:05:44 ah May 19 15:05:47 (because the scripts on melo that do the syncing are running with my account) May 19 15:05:57 ok May 19 15:06:07 no huge deal, just confusing May 19 15:06:08 I'll have a think about how to fix that May 19 15:06:13 makes you look like a hard worker May 19 15:06:13 yeah, it is a bit misleading May 19 15:06:16 heh May 19 15:06:29 good to see you having more time for OE May 19 15:44:35 Crofton|work: the dashboard doesn't show commits by him May 19 15:44:39 it shows commits *pushed* by him May 19 15:44:42 the author still will be correct May 19 15:56:33 yeah. we see that now May 19 17:16:14 hi May 19 17:16:32 anyone can tell me why inherit qt4x11 doesn't work in my recipes May 19 17:16:58 it shows missing unbuildable dependency chain qt4x11 May 19 17:17:15 anyone available ? May 19 17:17:40 inherit autotools works fine May 19 17:18:08 but i am building a qt application but inherit qt4x11 not working :< May 19 17:21:40 ohai? May 19 17:21:52 your .pro file is wrong? May 19 17:23:49 ohai_: which OE? May 19 17:24:08 ohai_: how old is it and what is the error? May 19 17:25:36 ahh found it May 19 17:25:47 it was old oe where depends was qt4x11 May 19 17:25:55 where as my package is qt4-x11-free May 19 17:25:55 :-) May 19 17:34:16 03Martin Jansa  07master * r8452193de1 10openembedded.git/recipes/linux/ (linux-2.6.37/om-gta02/defconfig linux-openmoko_2.6.37.bb): May 19 17:34:16 linux-2.6.37: om-gta02 defconfig, enable BMP085 and INPUT_LIS302DL May 19 17:34:16 * fixes http://shr-project.org/trac/ticket/1272 May 19 17:40:04 hi, I need an ack for that from an angstrom developer for that: http://patches.openembedded.org/patch/3945/ May 19 18:04:32 khem: I got my scripts fixed up for doing weekly changelogs on a bunch of repos May 19 18:04:43 khem: see the email just sent to oe-dev and oe-core maillists May 19 18:04:56 khem: thinking of starting a oe-admin repo with this stuff May 19 18:11:14 cbrake: yes thats a good idea May 19 18:11:33 khem: do you like the name oe-admin May 19 18:11:38 yep May 19 18:11:50 or may be openembedded-admin May 19 18:12:00 since we have been using full name' May 19 18:12:26 hmmm there was some solution for this error Error: Package name contains illegal characters, (other than [a-z0-9.+-]) May 19 18:12:47 my memory is not with me May 19 18:12:58 was it fixed in the classes or the recipes May 19 18:29:24 hi khem May 19 18:38:17 woglinde: hi May 19 18:38:53 my kernel is called kernel-2.6.31.12-ER1 and opkg barfs at me May 19 18:38:59 *** Error: Package name contains illegal characters, (other than [a-z0-9.+-]) May 19 18:39:08 what did we do to fix it ? May 19 18:39:13 I remember we did something May 19 19:00:27 03Simon Busch  07master * r8a8dbc8823 10openembedded.git/recipes/qt4/ (files/palmpre/qte.sh qt4-embedded.inc): May 19 19:00:27 qt4-embedded: add palmpre specific profile script and bump PR May 19 19:00:27 The profile script sets the input method to LinuxInput rather than Tslib which is May 19 19:00:37 03Simon Busch  07master * r4adf97be8c 10openembedded.git/recipes/qt4/ (qt4-embedded.inc qt4-x11-free.inc qt4.inc): (log message trimmed) May 19 19:00:37 qt4: package qml plugins too and correct their install directory May 19 19:00:37 QML components from Qt source were installed to ${prefix} before and got never packaged. May 19 19:10:35 woglinde, hi, do you know some friendly angstrom devs? I need an ack for that: http://patches.openembedded.org/patch/3945/ May 19 19:10:47 ask koen May 19 19:10:52 or crofton May 19 19:10:59 or xora May 19 19:18:09 03Simon Busch  07master * r3e239e4ddf 10openembedded.git/conf/distro/aurora.conf: May 19 19:18:09 aurora-distribution: require minimal first before we assign anything May 19 19:18:09 Signed-off-by: Simon Busch May 19 19:19:32 woglinde, ok thanks a lot May 19 19:19:38 oe-admin repo: http://cgit.openembedded.org/cgit.cgi/openembedded-admin/ May 19 19:33:19 jo re jama May 19 19:34:53 Crofton, hi, you're an angstrom developer ? if so could you look at this patch: http://patches.openembedded.org/patch/3945/ May 19 19:35:03 03Philip Balister  07org.openembedded.dev * r45913a1062 10openembedded.git/recipes/uhd/ (3 files): May 19 19:35:03 uhd : Upgrade from 003.000.001 to 003.001.000. May 19 19:35:03 Signed-off-by: Philip Balister May 19 19:35:44 GNUtoo, check the list May 19 19:36:01 Crofton, ok thanks a lot May 19 19:40:58 in the case of a function overide such as 'do_install_angstrom' I find that 'do_install_append' later in the recipe does not get appended - why is that? May 19 19:42:39 ah right I got an ack May 19 19:42:42 sorry for the noise May 19 19:42:43 i *think* append/prepend happen before ordinary overrides, and this is why you have to append to both DEPENDS and DEPENDS_virtclass-native May 19 19:42:44 I didn't see it May 19 19:42:50 processing order issue May 19 19:42:51 but i'm not sure May 19 19:42:59 ah it's because it's very recent May 19 19:43:21 kergoth, that would make sense... it surprised me that it worked that way May 19 19:43:30 tharvey: we have way too much surprising behavior :P May 19 19:43:39 no doubt May 19 19:45:46 03Denis Carikli  07org.openembedded.dev * r73ff7347f4 10openembedded.git/conf/distro/include/angstrom-2010-preferred-versions.inc: May 19 19:45:46 angstrom-2010-preferred-versions.inc: remove xserver-common prefered version May 19 19:45:46 Without that fix Angstrom keep choosing xserver-common 1.33 instead of the 1.34 version May 19 19:52:18 tharvey: _append/_prepend really need to just go away entirely. if you want to do something at the end of the parsing, make a damn RecipeParsed event handler and set it in there. much more explicit and obvious May 19 19:52:24 but I've ranted about this before May 19 19:52:33 :) May 19 20:43:16 who invented the damn thing in the first place ? :-) May 19 20:43:48 * kergoth coughs May 19 20:44:01 what what? May 19 20:44:04 kergoth: any objection to moving the bitbake list to openembedded.org ? May 19 20:44:18 RP__: by all means, we need to ditch berlios May 19 20:44:36 kergoth: tsc was just discussion it. I'll go ahead and make it happen May 19 20:44:50 nobody can find it where it is May 19 20:45:00 yeah, understandably May 19 20:45:07 we definitely need things to be in obvious places May 19 20:45:16 * RP__ has meant to do this for a while May 19 20:45:31 bitbake is totally independent of OE :) May 19 20:45:40 hehe. one down, about 8 million other things to go, in the 'meant to do this for a while' pile May 19 20:45:51 likewise: yes and no May 19 20:46:03 likewise: it is its own project and it stays that way May 19 20:46:17 but being associated with the other OE lists is a good thing IMO May 19 20:46:42 well, while it could theoretically be used for other things, its still the oe folk that are the primary user and has the primary developers. nothing will prevent people from grabbing it from here and using it for other things May 19 20:46:45 RP__: just kidding while my compile is running, I remember a very old discussion about this. May 19 20:46:48 its just a sane default place May 19 20:47:06 I think some people did use it for (oe-lite folks in .dk??) May 19 20:47:13 yeah, oe-lite is the other user May 19 20:47:17 agreed May 19 20:47:17 i really need to try using it at some point May 19 20:47:42 shove it in at #8000000001 May 19 20:47:57 * RP__ has a todo list like that May 19 20:48:28 my solution is to remember my todo list. It never gets bigger than five items that way May 19 20:48:31 :-) May 19 20:48:53 May 19 20:55:49 morning kergoth May 19 20:56:13 hey pb_ May 19 20:56:16 how's it going? May 19 20:57:10 not too bad. spent today working on the building site, mostly hauling sheets of drywall around. May 19 20:57:23 back to the office tomorrow :-) May 19 20:57:27 ahh, fun fun :) May 19 20:58:10 yeah, starting to look like a habitable building though which is nice. May 19 20:58:18 nice May 19 20:58:35 also spent a while trying to find the stop valve for the water supply. no luck yet sadly. May 19 20:58:46 I know it's out there somewhere under the gravel but can't quite remember where. May 19 20:58:53 that must be pretty rewarding, seeing something tangible come out of all the effort. i hate that about software. we put all this work in, but nothing tangible comes out :) May 19 20:59:17 well, sometimes a product ships, but then it gets obselete, rinse, repeat May 19 20:59:20 heh May 19 20:59:38 Wait, we are supposed to ship product? May 19 20:59:41 yeah, occasionally I think about how I sit at my desk for days on end and all I really have to show for it is a bunch of zeros and ones. May 19 21:00:06 slightly depressing really, though I guess you could see it as an epic struggle against entropy or something. May 19 21:00:14 03Bernhard Guillon  07master * rfefa244bbb 10openembedded.git/recipes/xerces-c/xerces-c_3.1.1.bb: May 19 21:00:15 xerces-c: add version 3.1.1, change license to Apache-2.0 May 19 21:00:15 Signed-off-by: Bernhard Guillon May 19 21:00:33 pb_: show me the bits and I can tell if you succeeded fighting entropy :-) May 19 21:00:47 pb_: oh wait, you already gave me the git address :) May 19 21:01:06 ok, that FPGA compiled. No let's blow the roof of. May 19 21:01:09 +f May 19 21:03:58 Hi.. I am trying to build bootstrap-image o minimal.. for conf : May 19 21:04:00 DISTRO = "jlime-2010.1" May 19 21:04:00 MACHINE = "ben-nanonote" May 19 21:04:01 TARGET_OS = "linux" May 19 21:04:08 but I get always this error : May 19 21:04:14 http://paste.debian.net/plain/117425 May 19 21:04:20 Some ideas what to do? May 19 21:07:40 zrafa: looks like your machine is missing a defconfig. May 19 21:07:45 from first glance May 19 21:09:19 kergoth: how could I find it? May 19 21:09:27 look for it* May 19 21:14:34 kergoth: I see May 19 21:14:35 ./recipes/linux/linux-2.6.37/ben-nanonote/defconfig May 19 21:14:36 ./recipes/obsolete/linux/linux-kexecboot-2.6.37/ben-nanonote/defconfig May 19 21:15:00 but the log is talking about 2.6.38 and no idea if those file above are related with defconfigs you suggests May 19 21:15:24 perhaps you n eed to adjust your preferences so 2.6.37 is used, if that's whats supported by that machine May 19 21:16:49 In fact I would like to avoid kernel stuff, since I build the kernel with toolchain, but anyway I want to use OE for the rest, where could I adjust the preferences to use 2.6.37? May 19 21:17:24 ./conf/machine/ben-nanonote.conf ? May 19 21:22:29 yeah, it should likely set the preferred versions for its kernels there. see other machines for examples May 19 21:25:11 hm May 19 21:25:38 zrafa: I know what is that May 19 21:25:54 we have added support of kexecboot to nanonote one time May 19 21:26:07 seems this strike back to jlime May 19 21:27:39 Jay7: the kernel for nanonote is a little fuzzy I think, because official kernel.org does not have completely full support for nanonote, so it needs external patches May 19 21:27:55 zrafa: I think you may just place defconfig from .37 to .38 May 19 21:28:08 Jay7: what would you advice? Should we add some PREFERED_VERSION .37? May 19 21:28:31 we was having that patches for .37 but unsure about .38 May 19 21:28:36 moment, I'll look May 19 21:29:14 Jay7: so far I have been stuck in 2.6.34 from qi, which I build with toolchain, no via OE. But I want to use the millions of extras OE gives us :) May 19 21:30:20 dependency on kexecboot was introduced by conf/machine/ben-nanonote.conf:41 May 19 21:30:24 require conf/machine/include/initramfs-kexecboot.inc May 19 21:30:58 as easy way you just may comment this line May 19 21:31:48 Jay7: ah.. let me try :) May 19 21:32:16 seems we have not merged support of NN to linux-* recipes May 19 21:32:29 but .37 was removed May 19 21:32:55 well.. may be we will remove kexecboot dependency then for some time May 19 21:40:19 Jay7: yeah, if you could do that until some better support for linux-* and NN May 19 21:41:08 zrafa: I'll talk with ant today about this May 19 21:41:18 Jay7: thanks a lot May 19 21:45:25 Jay7, about kexecboot I must still do a defconfig that works for it, since my last one didn't even boot(I think some bugs that I can't see since I've no serial console and the display is black but illuminated) May 19 21:45:29 hi btw May 19 21:45:45 GNUtoo: yes, I remember May 19 21:46:04 big question about kexecboot: May 19 21:46:14 can I use my own kernel for it? May 19 21:46:17 not a standard one May 19 21:46:17 better to have serial console and kexecboot with debug :) May 19 21:46:24 GNUtoo: sure May 19 21:46:33 kexecboot itself is just binary May 19 21:46:39 the serial console would be hard to get on that phone May 19 21:46:44 you may use it even from any other image May 19 21:46:54 yes I know May 19 21:47:02 there is a eglibc version May 19 21:47:03 well.. I suspect some fb problem then May 19 21:47:08 no idea May 19 21:47:13 it could break before fb May 19 21:47:16 try to compile with --enable-textui --disable-fbui May 19 21:47:30 no, the problem is a kernel defconfig one May 19 21:47:38 basically I got it in the past May 19 21:47:42 without kexecboot May 19 21:47:53 when making my own defconfig from scratch May 19 21:47:59 then I took meego's one May 19 21:48:03 and modified it May 19 21:48:18 but maybe it's indeed some fb defconfig May 19 21:48:21 I'll look May 19 21:48:32 if I've still the defconfig of last time May 19 21:49:11 * Jay7 is playing with minidlna May 19 21:49:28 ok May 19 21:49:38 hm.. seems we have no recipe for it May 19 21:54:53 03Simon Busch  07master * r2d67689202 10openembedded.git/recipes/qt4/ (qt4-embedded.inc qt4-x11-free.inc qt4.inc): May 19 21:54:53 qt4: fix OTHER_PACKAGES list and bump PR May 19 21:54:53 Commit 4adf97be8c5b5f71ad92095a19968af534baa9e2 added a *-dbg package to the May 19 22:09:48 Jay7: you have efikamx right ? May 19 22:11:43 khem: yes May 19 22:11:51 I've played with it today even :) May 19 22:13:27 now better May 19 23:30:25 I've got a scenario where I have 3 prioritized layers (using BBFILE_PRIORITY, etc), and have a .bbappend for 2 of the layers lower priority from upstream oe with the goal of adding that layers directory to FILESPATHBASE to overide various file::/ in the SRC_URI - what is the right mechanism to append a recipes current directory to FILESPATH such that it has priority? May 19 23:30:49 # prepend this layer to FILESPATH May 19 23:30:49 FILESPATHBASE_LAYER := ${@os.path.dirname(bb.data.getVar('FILE', d, True))} May 19 23:30:49 FILESPATHBASE =. "${FILESPATHBASE_LAYER}:" May 19 23:31:13 is not working as the higher priority sees FILESPATHBASE_LAYER as the directory of the lower priority's bbappend May 20 00:29:36 anyone seen a problem with OE builds and perl on F14? May 20 00:52:17 Jay7: now bootstrap built okey for nanote May 20 00:53:02 Jay7: could we convince somebody to remove "require conf/machine/include/initramfs-kexecboot.inc" from conf/machine/ben-nanonote.conf:41 until all the other bits are okey? **** ENDING LOGGING AT Fri May 20 03:00:00 2011