**** BEGIN LOGGING AT Sat May 07 02:59:58 2016 May 07 04:56:19 heeen: sounds like the rcn u-boot defaults to the opposite of that May 07 04:57:02 ie, you need to hack the uEnv.txt to make it switch devices for the rootfs May 07 06:43:52 I set into mymachine.conf KERNEL_DEVICETREE = "mymachine.dtb" but the DTB is not present into images/mymachine where I have zImage, am I missing something? May 07 06:44:11 YP jethro May 07 11:20:58 heeen: yes May 07 11:22:03 otavio: hello May 07 11:22:11 :-) May 07 11:22:23 otavio: are you experienced with RTS/CTS on iMX6 ? May 07 11:22:32 depends May 07 11:25:01 ? May 07 11:25:13 otavio: https://community.freescale.com/message/636387 May 07 11:26:24 otavio: my feeling is that nobody is using RTS/CTS signals on MX6 May 07 11:27:14 otavio: https://community.freescale.com/thread/391442 May 07 11:28:43 otavio: basically looks like iMX6 UARTs can't operate like a (standard) PC May 07 11:30:03 otavio: in fact I wasn't able to find an iMX6 board using these signals May 07 11:31:03 mckoan: fsl,uart-has-rtscts seems need May 07 11:31:44 mckoan: we have one custom which does May 07 11:31:53 mckoan: an industrial device May 07 11:32:28 mckoan: did you test mainline? May 07 11:33:58 otavio: I'm currently on 4.5.2 May 07 11:34:34 but I also tested 3.14.28 and 4.1.15 May 07 11:35:29 otavio: I suspect a bug/problem related to register 37.4.572 Select Input Register (IOMUXC_UART3_UART_RTS_B_SELECT_INPUT) May 07 11:36:38 mckoan: I am not aware of any May 07 11:37:13 mckoan: please prepare an e-mail and I can ask May 07 11:37:32 mckoan: but all the information you have; so I forward it May 07 11:40:46 otavio: thank you I will May 07 11:49:38 otavio: have a nice rest of the day May 08 00:30:07 https://bpaste.net/raw/d403a19d0606 <= what's wrong with this picture? May 08 00:47:35 it is Saturday afternoon and you are working? May 08 00:59:13 good guess May 08 00:59:21 gut not quite... May 08 01:00:17 earlier this week that ^^ fail made sense because there was an actual error May 08 01:01:00 no more error with "file" command, package still fails May 08 02:54:14 kergoth: I finally updated qemu-nios2 patches and added support for qemu-nios2 user emulation, so I can now compile gobject-introspection, wheee :) May 08 02:54:37 Crofton: sunday morning here :) **** ENDING LOGGING AT Sun May 08 02:59:58 2016