**** BEGIN LOGGING AT Sun May 07 09:59:57 2006 May 07 10:32:15 hi May 07 10:32:24 hey May 07 10:33:18 vmaster: do u have experiance with PCI ? May 07 10:34:11 I basically wanted to write a driver for a conexant cx11252 chipset ( a winmodem) so I need to reverse the driver from windows May 07 10:34:35 I was wondering if I could put a breakpoint on the PCI adresss to be able to see the data writen and read from the pci card May 07 19:41:11 Hello. May 07 19:41:31 Any ideas, is it possible to reset a boart via jtag? I mean is there a generic reset, or should I dig into my chips documentation and find a register which should be written to reboot, if any? May 07 19:43:52 xl0: depends on what you mean by "reset" May 07 19:44:06 xl0: what do you expect to accomplish by a "reset" ? May 07 20:26:56 xl0: most microcontroller JTAG interfaces specfiy a system-reset line May 07 20:42:08 prpplague: you are right, I don't need a reset, I need the cpu to boot my just written code. May 07 20:42:36 vmaster: Any ideas about the intel ixp425? May 07 20:47:42 xscale based boards must have separate system-reset and test-reset to support debug May 07 20:50:26 I don't see any such options in jtag-tools, is there any othe tool for linux with xscale support? May 07 20:50:55 you're using a "wiggler" style interface? May 07 20:51:26 ByteBlaster May 07 20:52:11 mhh, guess that's missing the nSRST connection May 07 20:53:40 btw, is it normal that the flashing operation is damn slow? It takes about an hour to upload an 300k image. May 07 20:54:13 yes, that's normal May 07 20:54:31 the parport can do about 350kHz May 07 20:54:38 and the scan chain is several hundred bits long **** ENDING LOGGING AT Mon May 08 09:59:57 2006