**** BEGIN LOGGING AT Wed Nov 08 02:59:57 2006 Nov 08 09:11:57 rwhitby: that would be great. i'll ping you once i'm atleast confident that it /could/ work Nov 08 09:19:55 vmaster: ok - I've got the JTAG set up now, and tested it by reflashing the bootloader. Nov 08 09:20:41 and my colleague intimately knows OpenOCD now (by doing the 56K port), so he'll be able to help debug too. Nov 08 09:22:39 you've got access to both reset lines? Nov 08 09:24:44 Hmm - not at the moment. Nov 08 09:24:56 do I need them? Nov 08 09:25:06 (I'll have serial control of the power supply) Nov 08 09:28:22 got disconnected, sorry Nov 08 09:28:55 for XScale debugging you need control over both reset lines (nTRST and nSRST) Nov 08 09:29:25 that should be possible, as the nslu2-linux wiki mentions that someone used a BDI2000 on it Nov 08 09:29:33 Hmm - don't have those on my cheap Digilent jtag calbe Nov 08 09:29:36 cable Nov 08 09:31:34 what's the cheapest cable i can use with openocd for xscale debugging? Nov 08 09:32:26 any wiggler-clone with the full pinout, i.e. nTRST and nSRST Nov 08 09:32:36 for example olimex ARM-JTAG Nov 08 09:34:24 so we have a lot of macgraigor boxes for OnCE - can I repurpose one of those for XScale? (usb2demon, usb2sprite, etc - I think we have one of each) Nov 08 09:35:03 macraigor's usb devices are proprietary, these wont work. a macraigor parallel port device (wiggler, raven) would work Nov 08 09:35:26 at least i could make the raven work again... Nov 08 09:35:43 we have a raven, but for OnCE pinout Nov 08 09:36:10 let me check their site Nov 08 09:37:59 <[g2]> vmaster you support raven ? Nov 08 09:38:11 heh, I "could" support the raven Nov 08 09:38:45 I know how it works from looking at the parallel port data long enough... Nov 08 09:38:58 but I'm not sure if I can use that information... Nov 08 09:39:59 <[g2]> ok Nov 08 09:40:44 <[g2]> vmaster you support the digilent parallel cable Nov 08 09:41:22 <[g2]> and possibly their usb-jtag device ? Nov 08 09:41:37 <[g2]> maybe those don't have enough pins Nov 08 09:41:45 digilent doesn't Nov 08 09:41:52 parallel that is Nov 08 09:44:08 [g2]: pinout for parallel cables is easily ajustable, digilent isn't there atm., but could be added within minutes Nov 08 09:44:49 <[g2]> vmaster we should setup the high speed GW cable Nov 08 09:46:50 unless their cable is very special this can be done quickly, too Nov 08 09:46:56 lennert already figured out how it works, right? Nov 08 09:47:58 <[g2]> nod we've identified on the Loft and downloaded on the S3 Nov 08 09:48:06 <[g2]> with lennert's drivers Nov 08 09:48:12 <[g2]> it is "special" Nov 08 09:48:27 <[g2]> but should be pretty straight forward Nov 08 09:48:48 yeah, it's special, but it wont be a lot different from the raven or the JTAGAccelerator Nov 08 09:49:07 with a parallel port you don't have many choices if you want to make this thing fast Nov 08 09:49:07 <[g2]> vmaster right we just need a little shim Nov 08 10:00:46 the GW dongle is pretty easy to interface with, just don't trust the docs Nov 08 10:09:28 <[g2]> lennert do you want to start ixp4xx driver testing in BE or LE ? Nov 08 10:09:56 <[g2]> I'd guess LE as you'd have the debian nfs rootfs Nov 08 10:10:48 probably LE as that's what other folks use Nov 08 10:10:56 <[g2]> ok Nov 08 23:15:01 <[g2]> vmaster are you off for the evening soon ? Nov 08 23:21:41 i think so Nov 08 23:21:50 half an hour maybe Nov 08 23:23:38 <[g2]> vmaster Ok cool. I'll look for you in the AM Nov 08 23:23:46 <[g2]> have a great evening Nov 08 23:24:08 sure, i'll be up in about 9 hours from now Nov 08 23:25:40 <[g2]> I'll probably be up an couple hours after that :) Nov 08 23:26:29 <[g2]> vmaster do you have any preferred package delivery service ? Nov 08 23:26:36 <[g2]> FedEx, UPS ? Nov 08 23:26:41 [g2]: the one that's cheapest for you Nov 08 23:26:50 <[g2]> dunno if USPS sends there Nov 08 23:27:14 UPS sends here Nov 08 23:27:28 ah, united states postal service Nov 08 23:27:29 ? Nov 08 23:27:32 <[g2]> yeah Nov 08 23:27:53 <[g2]> those are the big three Nov 08 23:28:05 they do Nov 08 23:28:11 http://pe.usps.com/text/imm/immicl/immicleg_018.html Nov 08 23:32:57 <[g2]> cheers (dinner call) Nov 08 23:33:58 gn8 [g2] Nov 08 23:50:45 <[g2]> nite vmaster **** ENDING LOGGING AT Thu Nov 09 02:59:57 2006