**** BEGIN LOGGING AT Thu Jan 18 02:59:57 2007
Jan 18 03:02:20 <nm> can openocd run on linux platform :-/
Jan 18 03:08:19 <ka6sox> probably but ask vmaster_ when he is up (in .de)
Jan 18 03:15:39 <nm> re vmaster_ 
Jan 18 03:16:04 <nm> i'm confusing w/ wiggler cable, i dont' know why it not works
Jan 18 03:16:28 <nm> ka6sox, can you give /me some experience
Jan 18 03:33:20 <nm> vmaster_, can openocd work w/ IXDP 425 ?
Jan 18 04:36:12 <ka6sox> nm, sorry was dinner time here.
Jan 18 04:36:33 <ka6sox> you have the ixdp 425 development platform?
Jan 18 04:48:24 <dfgvdf> hi
Jan 18 04:50:18 <dfgvdf> anyone know how to unbrick a fonera?
Jan 18 04:50:29 <dfgvdf> anyone know how to unbrick a "la fonera" with jtag?
Jan 18 04:51:24 <ka6sox> bummers...never had one to unbrick.
Jan 18 11:27:18 <nm> vmaster, are you there ?
Jan 18 11:28:22 <vmaster> hey nm 
Jan 18 11:28:42 <nm> vmaster, can openocd run on linux platform :-/
Jan 18 11:28:48 <vmaster> 14:19 < vmaster> nm: yes, that's what i wrote it on. Support for Cygwin, native Windows and FreeBSD was added later
Jan 18 11:29:07 <vmaster> I replied to you yesterday, but you were already disconnected, I guess
Jan 18 11:29:15 <nm> vmaster, okie :-)
Jan 18 11:29:44 <nm> vmaster, can it work w/ IXDP 425 ? 
Jan 18 11:30:09 <vmaster> I've got a few replies from people telling me that it works for them with a IXP42x, so I think it should work with the IXDP425
Jan 18 11:31:27 <nm> vmaster, which jtag adapter you using now ? Wiggler or ??
Jan 18 11:32:00 <vmaster> heh, actually, I'm using all supported JTAG adapters
Jan 18 11:32:27 <nm> vmaster, hehe :-)
Jan 18 11:37:23 <nm> vmaster,  i'm current using wiggler (http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable ,buffered cable) but i dont't know why it not work w/ ocdremote v2.17 ( get internal error 43 event wire pin 8 to 15).
Jan 18 11:37:46 <vmaster> nm: on Windows? or on Linux?
Jan 18 11:37:53 <nm> vmaster, do you have any idea to test this cable on AT91RM9200 
Jan 18 11:38:30 <nm> vmaster, any platform 
Jan 18 11:38:51 <vmaster> afaik ocdremote doesn't support Wigglers on Linux
Jan 18 11:39:14 <vmaster> at least it didn't two years ago, when I last checked the macraigor stuff
Jan 18 11:50:21 <nm> vmaster, oh i see ocdremote support raven
Jan 18 11:51:05 <nm> vmaster, have any ide or ocd tool to test this cable (windows or linux) ?
Jan 18 12:03:05 <vmaster> gotta go for lunch, i'll be back in 15-20 minutes
Jan 18 12:21:30 <vmaster> nm: honstely I don't care about ocdremote - try the OpenOCD (run with "-d -l <logfile>"), and send the log to Dominic.Rath <at> gmx.de, including the .cfg file you used
Jan 18 12:23:37 <nm> vmaster, okie, i'm trying ;)
Jan 18 12:24:04 <vmaster> nm: which board are you going to try? the ixp? or the at91rm9200?
Jan 18 12:25:10 <nm> vmaster, currently i'm try w/ at91rm9200
Jan 18 12:26:52 <vmaster> ok, you can use a windoze binary from yagarto.de, or compile yourself from trunk/
Jan 18 12:28:17 <nm> vmaster, okie guy,
Jan 18 12:31:22 <nm> i'm switch to windows
Jan 18 13:02:11 <nm> vmaster, here is my log (loglevel =3 ) http://pastebin.com/861999 and arm9 config http://pastebin.com/862000
Jan 18 13:02:24 <nm> i got openocd command on port 4444
Jan 18 13:03:35 <vmaster> everythig seems fine
Jan 18 13:03:37 <vmaster> +n
Jan 18 13:06:10 <nm> vmaster, in oOCD Command line, can i get chip ID ?
Jan 18 13:14:25 <vmaster> no
Jan 18 13:14:32 <vmaster> well, not the JTAG id
Jan 18 13:14:37 <vmaster> you can read the CP15 ID register
Jan 18 13:20:20 <nm> vmaster, i can't get this ID on reg command ?
Jan 18 13:27:04 <nm> vmaster, Debug:   arm7_9_common.c:838 arm7_9_halt(): target->state: reset
Jan 18 13:27:04 <nm> Error:   arm7_9_common.c:853 arm7_9_halt(): can't request a halt while in reset if nSRST pulls nTRST
Jan 18 13:27:20 <nm> vmaster, what problem w/ my cable ?
Jan 18 13:39:42 <nm> vmaster, thx guy, hehe it works !!!
Jan 18 13:40:01 * nm come home, bb*
Jan 18 18:38:38 <nm> g9*
Jan 19 02:25:57 <nm> vmaster_, are you there ?
**** ENDING LOGGING AT Fri Jan 19 02:59:58 2007