**** BEGIN LOGGING AT Mon Jun 11 02:59:57 2007 Jun 11 10:43:10 Hi There Jun 11 10:43:11 me again Jun 11 10:43:34 hard to find any 'ready-to-use' wigglers here in France Jun 11 10:46:35 regarding the bootloaer itself Jun 11 10:46:58 it just looked like it was an independant linux kernel on its own... Jun 11 10:47:50 any ARM bootloader I could try first? Jun 11 10:51:48 U-Boot, Redboot or Apex are among the available bootloaders Jun 11 10:52:20 but the bootloader has to support your particular board (rv042 iirc) Jun 11 10:52:56 that's the question actually... Jun 11 10:53:51 I'll travel to Paris by the end of the week and hope I'd find hardware to actually get JTAG working Jun 11 10:54:03 then comes the testing time Jun 11 10:54:47 Bad stuff is that I did not backup any flash item prior to erase Jun 11 10:59:19 hmm, the source and binary are available from linksys Jun 11 10:59:41 from the main image, yes Jun 11 10:59:51 but not from the OpenSE BL Jun 11 10:59:57 unless I missed something Jun 11 11:11:35 yeah, looks like the "Firmware" package doesn't contain the bootloader Jun 11 11:11:48 which indeed seems to be another linux Jun 11 11:12:09 but likely with some kind of first-stage stub that does the necessary setup Jun 11 11:26:16 most probably Jun 11 11:27:12 well, you'll need to find an image of that bootloader Jun 11 11:27:29 someone with a working rv042 should be able to dump it from the flash Jun 11 11:28:24 without such an image you'd have to port one of the available bootloaders yourself, which is going to be rather hard without good documentation on the hardware Jun 11 11:30:06 so true Jun 11 11:30:51 and I have myself too few knowledge about what bootloaders for ARM stuf actually _do_ Jun 11 22:57:04 hi Jun 11 22:57:34 im trying to jtag a pansat 2700 and i need help Jun 11 22:59:51 do you have a link to a site with some interview about that device? Jun 11 23:00:07 d'oh Jun 11 23:00:13 been up too long... Jun 11 23:00:18 s/interview/information/ **** ENDING LOGGING AT Tue Jun 12 02:59:56 2007